Specific features of lignin dissolution in aqueous and aqueous-organic media

The solubility of lignin in aqueous NaOH solutions and dioxane-water mixtures was studied. Factors governing the solubility of lignin in these media were determined.     

Vapor-phase extraction of organic substances from aqueous media

A method for the vapor-phase extraction of dissolved organic substances from an aqueous medium into an organic solvent was developed. This method allowed us to introduce hydrophilic extractants into extraction. The experimental results were discussed in terms of the kinetic model proposed for the mechanism of vapor-phase extraction. The analytical capabilities of this method were demonstrated using the study of sulfide mineral waters as an example.     

Effects of protonation of alkyldimethylamine oxides on the dissolution temperature in aqueous media

The effects of protonation (ionization) of hexadecyldimethylamine oxides on the dissolution temperature in aqueous media were investigated by differential scanning calorimetry. Only one endothermic peak was reproducibly observed at all the degrees of ionization alpha examined that were assigned to the transition from the solid (the gel phase) to the solution containing micelles. The dissolution temperature versus alpha curves showed a maximum at alpha=0.5, strongly suggesting the formation of a stable complex of 1-to-1 composition of the nonionic and cationic species through the proposed hydrogen bond. From the shape of the dissolution curve as well as the composition analysis of the solid phase, the solid solution was found to be formed over all alpha values. Effects of alkylchain length on the dissolution temperature for a homologous series of octadecyl- (C18DAO), hexadecyl- (C16DAO), and tetradecyldimethylamine oxide (C14DAO) were also examined for alpha=0.5 and alpha=1. Both the transition temperature and the associated thermodynamic quantities DeltaH and DeltaS increased systematically with the chain length, but for alpha=0.5 smaller increases in DeltaH and DeltaS values with the chain length were observed [DeltaH/CH2 (kJ mol(-1))=7.2+/-0.2 and 2.2+/-0.5 for alpha=1 and alpha=0.5, respectively, and DeltaS/CH2 (J mol(-1) K(-1))=21.9+/-1.8 for alpha=1 and 4.6+/-1.9 for alpha=0.5]. By annealing procedures, the metastable nature of the gel phase was demonstrated for the C16DAO (alpha=1) solid.     

Decontamination of media filters in a groundwater treatment plant by dissolution processes using organic acid solutions

Ground water was collected from a depth of 1,200 m in the Al-Qasim area in mid-Saudi Arabia. This underground water contains minerals, mainly Fe and Mn and radio-nuclides like radium and other ionic materials. This water was filtered through a sand bed, which contains layers of sands of different sizes in order to remove those impurities from water. Mn and Fe were deposited on outer layer of each sand granule during filtration and radium was adsorbed on surfaces of these minerals. Ra was separated from these minerals by dissolving them in various acids such as ascorbic acid, citric acid, tannic acid, salicylic acid, tartaric acid and lactic acid under different experimental conditions like acid concentration, contact time, shaking speed, particle size, temperature and liquid/solid ratio. The effectiveness of these acids on radium removal was found as follows: ascorbic acid ≈ citric acid > tartaric acid > tannic acid > lactic acid > salicylic acid. Various reaction parameters were also optimized. Reaction kinetic and mechanism parameters of dissolution process were studied and compared with other published data.     

Versatile phase transfer of gold nanoparticles from aqueous media to different organic media

A novel, simple, and very efficient method to prepare hydrophobically modified gold particles is presented. Gold nanoparticles of different sizes and polydispersities were prepared. The diameter of the gold particles ranges from 5 to 37 nm. All systems were prepared in aqueous solution stabilized by citrate and afterwards transferred into an organic phase by using amphiphilic alkylamine ligands with different alkyl chain lengths. The chain length was varied between 8 and 18 alkyl groups. Depending on the particle size and the alkylamine, different transfer efficiencies were obtained. In some cases, the phase transfer has a yield of about 100%. After drying, the particles can be redispersed in different organic solvents. Characterization of the particles before and after transfer was performed by using UV/Vis spectroscopy, transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS) techniques. The effect of organic solvents with various refractive indices on the plasmon band position was investigated.     

Two-step enzymatic modification of solid-supported bergenin in aqueous and organic media

The natural flavonoid bergenin was directly immobilized onto carboxylic acid-functionalized controlled pore glass (carboxy-CPG) at 95% yield. Immobilized bergenin was brominated via chloroperoxidase in aqueous solution and then transesterified with vinyl butyrate in diisopropyl ether by subtilisin carslberg (SC) extracted into the organic solvent via ion-pairing. Enzymatic cleavage of 7-bromo-4-butyrylbergenin from carboxy-CPG (9.6% final yield) was accomplished using lipase B (LipB) in an aqueous/organic mixture (90/10 v/v of water/acetonitrile), demonstrating the feasibility of solid-phase biocatalysis of a natural product in aqueous and non-aqueous media.     

Heterogeneous photocatalytic treatment of organic dyes in air and aqueous media

This review focuses on the heterogeneous photocatalytic treatment of organic dyes in air and water. Representative studies spanning approximately three decades are included in this review. These studies have mostly used titanium dioxide (TiO₂) as the inorganic semiconductor photocatalyst of choice for decolorizing and decomposing the organic dye to mineralized products. Other semiconductors such as ZnO, CdS, WO₃, and Fe₂O₃ have also been used, albeit to a much smaller extent. The topics covered include historical aspects, dark adsorption of the dye on the semiconductor surface and its role in the subsequent photoreaction, semiconductor preparation details, photoreactor configurations, photooxidation kinetics/mechanisms and comparison with other Advanced Oxidation Processes (e.g., UV/H₂O₂, ozonation, UV/O₃, Fenton and photo-Fenton reactions), visible light-induced dye decomposition by sensitization mechanism, reaction intermediates and toxicity issues, and real-world process scenarios.     

Rapid dissolution of metal in aqueous media using a modified commercial spark source unit

In this preliminary study the feasibility of a modified spark source was investigated as a method of rapidly dissolving solid conductive samples in aqueous media prior to analysis by atomic spectroscopy. The spark source, originally designed for spark emission spectroscopy in air, was modified by the installation of a spark ablation vessel. This spark ablation vessel was designed for spark ablating samples in aqueous solution, such as deionised water. Samples such as mild steel and brass were ablated in 5–10 ml of deionised water for 2–30 s producing a colloidal suspension. The suspension was readily dissolved by adding 100 μl of concentrated HCl or HNO₃. In this paper the spark ablation vessel is described as well as some of the properties of spark ablation in aqueous solutions. Spark ablation rates on mild steel were measured with respect to spark ablation parameters such as applied current (power), polarity and spark time. Using mild steel as a test sample, spark ablation rates varied from 40 μg s⁻¹, with 2.5 A of applied current, to 70 μg s⁻¹ with 10 A of applied current to the electrodes. The feasibility of using this technique for analysing trace levels (μg g⁻¹) of elements in solid samples was also demonstrated for elements such as Ni in brass with inductively coupled plasma mass spectrometry (ICP-MS). Quantification of selected elements (Cr, Ni, Mn and Cu) in a certified alloy (SRM 663) and a non-certified stainless steel showed good agreement between the measured values using spark ablation and the accepted values.     

Isostructural self-assembly of 2'-deoxyguanosine derivatives in aqueous and organic media

We report the self-assembly of a hydrophilic 8-(m-acetylphenyl)-2'-deoxyguanosine (mAG) derivative into a discrete and thermally stable hexadecameric supramolecule in aqueous media. We demonstrate that this hexadecamer is isostructural to the one formed by a related lipophilic derivative in organic media. This mAG moiety represents a rare example of a small-molecule recognition motif that is capable of assembling isostructurally and with high fidelity in both organic and aqueous media.     

Light scattering study of solubilization of organic molecules by block copolymer micelles in aqueous media

Block copolymers, when dissolved in a selective solvent, form spherical micelles. These micelles can selectively solubilize organic molecules otherwise insoluble in the pure solvent. In this study, we report solubilization of organic molecules by styrene-methacrylic acid block copolymer micelles in aqueous buffers. A light scattering technique was developed to determine the extent of micellar solubilization. Our results indicate that the extent of micellar solubilization depends on the chemical nature of organic molecules, specifically, on the interactions between the organic compound and polystyrene. A thermodynamic model has been developed to describe micellar solubilization. The theoretical calculation agrees reasonably well with the experimental results for two micellar samples examined. ©1995 John Wiley & Sons, Inc.     

Rate enhancement of PFP sulfonate ester aminolysis by chloride salts in organic and aqueous media

We report here, a method of accelerating the rate of aminolysis of PFP sulfonates to yield sulfonamides using tetrabutylammonium salts. We have previously explored the utility of employing PFP sulfonates in the formation of sulfonamides; however we demonstrate here the advantages of combining the existing methodology with a revised protocol which allows the diversity within both the sulfonate ester and the amine to be extended.     

Effect of mixed organic solvents on atomic absorption spectrophotometry of refractory metals

The effect of various organic solvents on the absorption characteristics of vanadium was studied in fuel-rich oxy-acetylene and nitrous oxide-acetylene flames. The absorption of the 3183.9 Å line of vanadium was greatly enhanced by the use of various mixed organic solvents when fed to oxy-acetylene flames. In the case of the nitrous oxide-acetylene flame, the addition of diethylene glycol (about 8% in the final solution) and similar compounds to the aqueous solution of vanadium increased the absorption by about 50%. The observations and the possible role of the mixed organic solvents are discussed.     

Dispersion stability in mixed solvent (aqueous/organic) media

The dependence of critical coagulation concentrations and zeta potentials on composition for polystyrene latex particles in n-alkanol/water and urea/water mixtures are compared. Similar data from other authors are also reviewed.     

Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys

Spark ablation or electric dispersion of metal samples in aqueous solution can be a useful approach for sample preparation. The ablated metal forms a stable suspension that has been described as colloidal, which is easily dissolved with a small amount of concentrated (16 M) HNO₃. In this study, we have examined some of the properties of the spark ablation process for a variety of metals (Rh and Au) and alloys (stainless steel) using a low power spark (100–300 W). Particle size distributions and conductivity measurements were carried out on selected metals to characterize the stable suspensions. A LASER diffraction particle size analyzer was useful for showing that ablated particles varied in size from 1 to 30 μm for both the silver and the nickel alloy, Inconel. In terms of weight percent most of the particles were between 10 and 30 μm. Conductivity of the spark ablation solution was found to increase linearly for approximately 3 min before leveling off at approximately 300 S cm³. These measurements suggest that a significant portion of the ablated metal is also ionic in nature. Scanning electron microscope measurements revealed that a low power spark is much less damaging to the metal surface than a high power spark. Crater formation of the low power spark was found in a wider area than expected with the highest concentration where the spark was directed. The feasibility of using spark ablation for metal dissolution of a valuable artifact such as gold was also performed. Determinations of Ag (4–12%) and Cu (1–3%) in Bullion Reference Material (BRM) gave results that were in very good agreement with the certified values. The precision was ± 0.27% for Ag at 4.15% (RSD = 6.5%) and ± 0.09% for Cu at 1% (RSD = 9.0%).     

Colorimetric response of spiropyran derivative for anions in aqueous or organic media

We previously found that a simple spiropyran derivative (1:1′,3′,3′-trimethyl-6-nitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a selective and sensitive cyanide anion (CN⁻) receptor in aqueous media under UV irradiation¹³. The receptor, when irradiated by UV light in a water/MeCN mixture, creates a CN⁻-selective absorption band via a nucleophilic addition of CN⁻ to 1 (formation of the 1-CN⁻ species) and allows quantitative determination of very low levels of CN⁻. In the present work, effects of pH and water content on the response of 1 to anions were studied to clarify the detailed properties of 1. In aqueous media, 1 reacts selectively with CN⁻regardless of pH and water content, but the reaction is suppressed by a decrease in pH and an increase in water content due to the protonation of CN⁻. In contrast, in pure MeCN, addition of F⁻ also creates a new absorption band, as does CN⁻. This is promoted via a nucleophilic interaction between 1 and F⁻ in a 1:2 stoichiometry (formation of the 1-2F⁻ species). The 1-CN⁻ and 1-2F⁻ species have different photochemical properties; the 1-CN⁻ species is stable upon UV irradiation, while the UV irradiation of the 1-2F⁻ species leads to a decomposition of the spiropyran platform.     

Carboxylate-based receptors for the recognition of carbohydrates in organic and aqueous media

Acyclic receptors containing neutral and ionic hydrogen-bonding sites, such as amino-pyridine and carboxylate groups, were prepared and their binding properties toward neutral sugar molecules were studied. The binding studies with disodium and bis(tetramethylammonium) salts containing the dianion 11 have revealed that this type of receptor molecule is able to recognize the selected sugars in both organic and aqueous media. The carboxylate/pyridine-based receptor 11 exhibits in chloroform at least a 100-fold higher affinity for glucopyranosides than the previously described triarmed pyridine-based receptor 1, incorporating only neutral hydrogen-bonding sites. A substantial drop in the association constants is expectedly observed for an ester analogue of 11, compound 9. The dicarboxylate 11 is able to form complexes in water with methyl beta-D-glucopyranoside and D-cellobiose, with a preference for the disaccharide. The studies show the importance of charge-reinforced hydrogen bonds in the recognition of carbohydrates.