Torsional oscillations of a circular stamp on an elastic layer with a cylindrical cavity

The problem of torsional oscillations of a stamp that is linked with an elastic stratum which contains a cylindrical cavity is considered. The problem is formulated in the form of conjugate integral equations that are related to the integral Weber transforms. The conjugate equations are reduced to an equivalent Fredholm equation of the second kind.Translated from Dinamicheskie Sistemy, No. 9, pp. 54–59, 1990.     

Vertical oscillations of multimass system on elastic half space with a cylindrical cavity

A problem on oscillations of a multimass system (MS) is considered on an elastic half space with a cylindrical cavity. Equations of motions of an MS are given, which are modeled by masses that are connected by springs and dampers. A motion of the half space with a cavity is characterized by a transmitting function,which is known from a solution of a contact problem with vertical oscillations of a die on the half space given. The conditions of interrelation of the MS with the base close the system of algebraic linear equations for determining amplitudes of oscillations of each element of the MS. Translated from Dinamicheskie Sistemy, No. 7, pp. 13–18, 1988.     

Axisymmetric indentation of a circular stamp with adhesion into an elastic half-space with a spherical cavity

On the basis of the expansion formulas of the vector solutions of the Lame equations in cylindrical and spherical coordinates, the problem of a circular stamp is formulated in the form of an integro-algebraic system of equations. By the method of orthogonal polynomials, it is reduced to a collection of infinite systems of linear algebraic equations, for which the method of reduction is justified. Formulas for the normal and tangential stresses under the stamp are given.Translated from Teoreticheskaya i Prikladnaya Mekhanika, No. 18, pp. 14–20, 1987.     

Diffraction of a monochromatic plane shear wave on a reinforced cylindrical cavity in an elastic half-space

This article examines a boundary-value problem concerning the diffraction of a monochromatic plane shear wave on a reinforced cylindrical cavity in an elastic half-space. It is assumed that longitudinal shear stresses are absent and that the normal displacements over the entire boundary are specified. Through the use of a special form of the Lamé representation in cylindrical coordinates, the problem is reduced to the determination of scalar functions which satisfy the Helmholtz equation. The coefficients of the Fourier expansions of these functions in the angular coordinate are written as the sum of Fourier and Weber integrals. The densities of these integrals are determined exactly. A specific example is examined.Translated from Dinamicheskie Sistemy, No. 5 pp. 42–49, 1986.     

Vertical vibration of a circular stamp on an elastic-porous half-space with saturation fluid

A specific problem concerning the vertical vibrating response of a composite layer (elastic-porous and saturation fluid) under rigid circular stamp is studied. The motion of the medium is governed byBiot’s dynamic potential equations and the problem is solved by the method of Fourier-Bessel transformation. Formulae are obtained for the vertical displacement of the rigid phase. Graphs are presented for the amplitude of vibration.     

Contact problem for elastic half-space with an ellipsoidal cavity

We consider the axisymmetric problem of elasticity theory for a space with an elongated ellipsoidal cavity with mixed boundary conditions of smooth contact on its surface. The method of p-analytical functions is applied to reduce the solution of the problem to an infinite quasi-completely regular system of linear algebraic equations with upper bounded free terms that tend to zero as the index increases. The behavior of the normal stress near the contact line of the different boundary conditions is analyzed.Translated from Vychislitel'naya i Prikladnaya Matematika, No. 64, pp. 94–103, 1988.     

An axially symmetric contact problem for a half-space with an elastically reinforced cylindrical cavity

We consider the pressure of a plate on a half-space with a round cylindrical cavity. The surface of the cavity is reinforced by elastic elements that are modeled by very general operators. The problem is reduced to a Fredholm integral equation of second kind. A detailed study is made of the case of reinforcement described by the Winkler law. An approximate solution is obtained in the form of the asymptotics with respect to the radii of the plate and the cavity.Translated fromDinamicheskie Sistemy, No. 6, 1987, pp. 80–85.     

Study of oscillations in a viscoelastic cylindrical shell in an elastic medium

An equation was obtained and solved for oscillations in a viscoelastic cylindrical shell located in the ground. A numerical example is examined.Moscow Electronic Engineering Institute. Translated from Mekhanika Polimerov, No. 1, pp. 178–181, January–February, 1974.     

Diffraction of a pulsed longitudinal shear wave by a cylindrical cavity in an anisotropic half-space

The problem of the stress concentration on a free tunnel-shaped cavity in an orthotropic half-space with a free flat boundary, on which shear waves in the form of periodic triangular pulses are incident, is solved. The initial problem is reduced to a series of problems of diffraction of harmonic shear waves. The effect of the degree of shear anisotropy on the tangential-stress concentration at the boundary of a cavity with a circular cross section is studied for different positions of the leading edge of the pulse relative to the boundary of the half-space and the cavity.Donetsk. Translated from Teoreticheskaya i Prikladnaya Mekhanika, No. 21, pp. 62–66, 1990.     

The pressure of a punch with a rounded edge on an elastic half-space

The problem of the unilateral contact without friction for a punch, the face of which is characterized by a rapid change in the neighbourhood of the a priori unknown boundary of the contact area, is investigated. Asymptotic formulae are obtained for the function which describes the variation of the contact area and the contact-pressure density in the boundary-layer region. The problem of the behaviour of the contact pressures in the neighbourhood of a smoothed stress concentrator is considered.     

Parametric oscillations of an orthotropic cylindrical shell with an elastic filler I. Formulation of the problem

A linear model of a Timoshenko-type shell with an elastic filler is proposed for solving the problem of the parametric oscillations of the system. A class of operators is derived, which act in a Hilbert space, for which the problem of the determination of a spectrum of eigen-values permits an iterative scheme of solution. Thus, the method for solving problems of parametric oscillations of structures proposed by Bolotin is confirmed.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 470–478, May–June, 1974.     

On the solution of mixed problems for a fiber with a vertical circular cylindrical cavity

A method of solving paired integral equations that appear in considerations of mixed problems of elasticity and thermoelasticity theory is given, with the help of generalized integral Weber transforms. The paired equations are reduced to an integral Fredholm equation of the second kind on the semiaxis, which have a discontinuous kernel, or to Fredholm equations of the second kind on a finite interval and infinite systems of linear algebraic equations, which are normal in the sense of Poincare-Koch. As an example, contact problems for an inhomogeneous fiber with a cavity are considered. If the fiber is bonded with the elastic half-space, then a second appproach is realized, which is based on a reduction to an equation with a self-adjoint operator, for which some method of sequential iteractions and the Bubnov-Galerkin method are justified.Translated from Dinamicheskie Sistemy, No. 7, pp. 95–102, 1988.     

The contact of a solid with an elastic half-space through a thin coating

More accurate equations of the deformation of thin plates, which are more convenient for solving contact problems for bodies with coatings and containing, as a special case, the equations of all known applied theories, are derived by an asymptotic analysis of the first fundamental problem of the theory of elasticity. The equations of the deformation of thin-walled elastic bodies are classified, their qualitative correspondence to the equations of the theory of elasticity is clarified, and the forms of the features that arise along the shift lines of the boundary conditions in the corresponding contact problems are established. A criterion for selecting approximate models to describe the properties of the coatings depending on the geometrical and mechanical characteristics of the coating and the substrate and also on their degree of adhesion is given.     

Radial vibrations of an infinite medium with a cylindrical cavity

Zusammenfassung Die vorliegende Arbeit bringt die vollständige theoretische Berechnung der Radialschwingungen eines unendlichen elastischen Mediums mit zylindrischem Ausschnitt. Die zylindrische Körperwand steht unter einem mit der Zeit allgemein veränderlichen Druck, und am Anfang sind alle Körperteile frei von Verschiebungen und Geschwindigkeiten.     

The vibrations of a thin elastic orthotropic circular cylindrical shell with free and hinged edges

The problem of the existence of natural oscillations of a thin elastic orthotropic circular closed cylindrical shell with free and hinge-mounted ends and of an open cylindrical shell with free and hinge-mounted edges, when the two boundary generatrices are hinge-mounted is investigated. Dispersion equations and asymptotic formulae for finding the natural frequencies of possible vibration modes are obtained using the system of equations corresponding to the classical theory of orthotropic cylindrical shells. A mechanism is proposed by means of which the vibrations can be separated into possible types. Approximate values of the dimensionless characteristic of the natural frequency and the attenuation characteristic of the corresponding vibration modes are obtained using the examples of closed and open orthotropic cylindrical shells of different lengths.     

A normal crack in an elastic half-space with stress-free surface

The problem of an elastic half-space with stress-free surface and a crack of arbitrary shape with prescribed displacements or tractions is reduced to an equivalent system of integral equations on the crack. For a pressurized crack in a plane perpendicular to the free surface, a scalar integral equation is derived. In properly chosen function spaces, unique solvability of the integral equation and regularity of solutions for regular data are proven.