取代烷基侧链长度对二维纳米结构的影响

合成了一系列烷基取代的间苯三酚衍生物,并在大气条件下用扫描隧道显微镜研究了它们在高定向裂解石墨表面的吸附和组装行为.实验结果表明,这些自组装分子具有条状结构特征.在链长较短的分子图像中,两条平行的烷氧基链肩并肩地排列在苯环的一侧,另一条烷氧基链则排列在苯环的另一侧,链与链之间彼此相互交错排列形成均一的烷基条带.当链长增加时,这种高稳定性和密排结构遭到破坏,出现单个分子和分子对共存的组装结构.这是由于烷基链与烷基链之间以及烷基链与基底之间的作用力共同决定的.通过调控分子烷基链的长度可以得到不同的表面二维纳米结构.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Revisiting the crystallization of poly(2‐alkyl‐2‐oxazoline)s

Poly(2‐alkyl‐2‐oxazoline)s (PAOx) exhibit different crystallization behavior depending on the length of the alkyl side chain. PAOx having methyl, ethyl, or propyl side chains do not show any bulk crystallization. Crystallization in the heating cycle, that is, cold crystallization, is observed for PAOx with butyl and pentyl side chains. For PAOx with longer alkyl side chains crystallization occurs in the cooling cycle. The different crystallization behavior is attributed to the different polymer chain mobility in line with the glass transition temperature (T_g) dependency on alkyl side chain length. The decrease in chain mobility with decreasing alkyl side chain length hinders the relaxation of the polymer backbone to the thermodynamic equilibrium crystalline structure. Double melting behavior is observed for PButOx and PiPropOx which is explained by the melt‐recrystallization mechanism. Isothermal crystallization experiments of PButOx between 60 and 90 °C and PiPropOx between 90 and 150 °C show that PAOx can crystallize in bulk when enough time is given. The decrease of T_g and the corresponding increase in chain mobility at T > T_g with increasing alkyl side chain length can be attributed to an increasing distance between the polymer backbones and thus decreasing average strength of amide dipole interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 721–729     

Ordered arrays of organometallic iridium complexes with long alkyl chains on graphite

Iridium(III) fac-tris(2-phenylpyridine) fac-[Ir(ppy)3] complexes equipped with long alkyl chains were prepared to examine their capability to form organized arrays on the surface of highly oriented pyrolytic graphite (HOPG). The molecules form lamellar arrays at the 1-phenyloctane/HOPG interface. From the analysis of the STM images, it was concluded that the molecules align with alkyl chains being interdigitated. Similar lamellar arrays were also obtained at the air/HOPG interface upon drop-casting of toluene solutions. The lamellar structure at the molecular level leads to rectangular two-dimensional crystalline domains a few hundred nanometers long (nanoslips). Infrared external reflection spectroscopy suggested that the adsorbed alkyl chains adopt the trans-zigzag conformation in the nanoslip, although the orientations of the zigzag plane of the alkyl groups are mixed. Cyclic voltammetry indicates fast electron transfer between the adsorbed molecules and the substrate and significant intermolecular electronic interactions. It was found that annealing at high temperatures is an effective method to prepare ordered assemblies more than a few micrometer scale (microslips). The orientations of the nanoslips prepared from the racemic mixture exhibited an apparent 12-fold symmetry, while its optically active enantiomer resulted in more irregular domains with a six-fold symmetry, implying an important role of chirality on packing at the molecular level and on the orientation of the domains at larger scales. When drop-cast from more concentrated solutions than a few hundreds of micromolar, multilayers were obtained, in which the alkyl chains in the molecules are more or less perpendicular to the surface. This structure can be transformed into the nanoslips upon standing.     

Effect of Electrolyte on the Interfacial Dilational Properties of Sodium 4,5-Diheptyl-2-propylbenzene Sulfonate at the Oil–Water Interface

The dilational viscoelastic properties of 4,5-diheptyl-2-propylbenzene sulfonate (377) in the presence or absence of electrolyte were investigated by means of two methods: the interfacial tension response to sinusoidal area variations and the relaxation of an applied stress. The higher dilational modulus of 377 than ordinary surfactant indicates that the strength against perturbation of interfacial layer of the former is greater. This may due to the two long and flexible branched alkyl chains, which are easily cross-linked and entangled. Moreover, the results reveal that the added electrolyte results in screening of electrostatic interactions between the ionized groups, which decreased the interfacial dilational modulus.     

Significant Effect of the Flexibility of Bridging Alkyl Chains on the Proximity of Stacked Porphyrin and Phthalocyanine Conjugated with a Fourfold Rotaxane Linkage

Spatial distance is an important factor in controlling the functional interactions between molecular units in a conjugate; therefore, the bridging unit has been closely examined. Here, we examined the effect of the flexibility of bridging alkyl chains on the proximity of stacked porphyrin and phthalocyanine conjugated with a fourfold rotaxane linkage. We found that closely stacking two π systems requires bridging alkyl chains above a certain length, and the shorter bridges hinder stacking because of their lower flexibility. The stacking distance between porphyrin and phthalocyanine in the conjugate with decyl (C₁₀) chains was estimated to be 4.03 Å and showed a unique physical character arising from short-distance interactions. The longer alkyl chains minimized steric restriction inside the fourfold rotaxane and allowed efficient communication between the porphyrin and phthalocyanine units. This is due to the flexibility of the side chains.     

Novel method for in-situ surfactant-based solid-phase extraction: application to the determination of Co(II) and Ni(II) in aqueous samples

We report on a completely new kind of solid phase extraction which we term in-situ surfactant-based solid-phase extraction (ISS-SPE). It represents a simple and rapid method for extraction from aqueous samples and preconcentration of compounds containing hydrophobic (alkyl) groups. A cationic surfactant containing alkyl chain is dissolved in the aqueous sample. Following the addition of hexafluorophosphate (HFP; an ion-pairing anion), solutions turn cloudy due to the interaction between the surfactant and the HFP ion. This is due to the formation of fine solid particles composed of the HFP salt of the cationic surfactant. The alkyl groups of the surfactant in the solid particles strongly interact with hydrophobic groups of analytes and become bound. The solid particles are centrifuged, and the sedimented particles can be either dissolved in an appropriate organic solvent, or leached with a solvent to recover the absorbed analyte(s). The method presented here has distinct advantages in that the extraction times are short and recoveries are high, probably a result of the formation of very fine particles of large specific surface, and of their good dispersion in the sample solution. The performance of ISS-SPE was demonstrated by extracting chelates of Co(II) and Ni(II) from water samples. Under the optimized conditions, the preconcentration factors are 51 and 45, respectively, and the detection limits are 0.9 and 0.6???g?L^?1. The method was validated by the analysis of a certified reference material and by comparing results with those obtained by electrothermal AAS.

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.     

Interfacial Dilational Properties of Hydrophobically Modified Partly Hydrolyzed Polyacrylamide and Anionic Surfactants at the Water-Decane Interface

The dilational viscoelastic properties of hydrophobically modified partly hydrolyzed polyacrylamide and anionic surfactants (4,5-diheptyl-2-propylbenzene sulfonate and gemini surfactant C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte have been investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. Experimental results show that at low surfactant concentration, the increase of the dilational modulus by the addition of surfactant molecules at low frequency might be explained by the mix-adsorption of the polymer chains and surfactant molecules. At the same time, polymer chain could sharply decrease the dilational modulus of surfactant film mainly due to the weakening of the strong interactions among long alkyl chains in surfactant molecules. At high surfactant concentration, the addition of surfactant molecules can decrease the dilational modulus of polymer solution due to the fast process involving in the exchange of surfactant molecules between the interface and the mixed complex formed by surfactant molecules and hydrophobic micro-domains. The added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally increases the frequency dependence of the interfacial dilational modulus. The data obtained on the relaxation processes via interfacial tension relaxation measurements can explain the results from oscillating barriers measurements very well.     

The Association of Picrate Ions with Amphiphilic Cations in Water and Aqueous Solutions of Nonionic Surfactant and β-Cyclodextrin

The interaction of cetyltrimethylammonium and cetylpyridinium bromides with picrate ions in water and aqueous solutions of the nonionic surfactant Brij 35 is studied by spectrophotometry. Spectral characteristics of the associates of picrate ions with long-chain nitrogen-containing cations depend on the concentration of a cationic surfactant. When β-cyclodextrin is added, these associates decompose owing to the formation of the strong inclusion complexes of the guest-host type with amphiphilic ions of a cationic surfactant or Brij 35 molecules. The conclusion is made that the driving force for the formation of premicellar aggregates involving picrate ions is the interactions between alkyl chains of surfactant cations. It is shown that, in the presence of various surfactants, as β-cyclodextrin concentration increases, first the molecules of nonionic surfactant and then amphiphilic cations bind with the receptor cavity. It is confirmed that there is no interaction between polyethylene glycol and β-cyclodextrin in aqueous solution.     

Small-angle neutron scattering studies of an adsorbed non-ionic surfactant (C12E24) on hydrophobised silica particles in water

Small-angle neutron scattering (SANS) studies of aqueous dispersions of St?ber silica particles (which have been hydrophobised by having 1-octadecanol grafted to their surface), carrying an adsorbed layer of the nonionic surfactant C12E24, in water, have been performed as a function of temperature. Using mixtures of D2O and H2O, the composition of the continuous phase was adjusted to have the same scattering length density as the silica particles. Hence, only the scattering from the 1-octadecanol and C12E24 layers was detected. The data have been analyzed using both a surface Guinier analysis and a two-layer structure model. It has been found that a step profile best describes the inner combined adsorbed layer (1-octadecanol grafted chains, plus the penetrating alkyl chains from the surfactant) and a semi-Gaussian profile the extended poly(ethylene oxide) outer layer. Both analyses demonstrated that the combined surface layer contracted with increasing temperature.     

Influence of Oleic Acid and Electrolyte on the Interfacial Dilational Properties of Surfactant/Polymer Systems at the Decane-Water Interface

The dilational properties of partly hydrolyzed polyacrylamide (HPAM) and 4,5-diheptyl-2-propylbenzene sulfonate (377) mixed systems in the absence or presence of electrolyte or oleic acid at the oil-water interface have been described by means of the oscillating barriers method and the interfacial tension relaxation method. The polymer plays different roles in influencing the nature of polymer-surfactant adsorbed layers at different surfactant concentrations. At low surfactant concentration, the addition of polymer perhaps weakens the “entanglement” of long alkyl chains, which decreases strikingly the dilational modulus of the adsorbed layer. At high surfactant concentration, the addition of the polymer increases the dilational modulus due to the hydrophobic interactions between polymer and surfactant molecules. On the case of adding electrolyte, the frequency dependence of dilational modulus increases due to the enhancement of exchange process of surfactant molecules and bivalent cation has more obvious effect than Na ion. Oleic acid plays dual roles in controlling interfacial dilational properties of mixed adsorption films: a small quantity of oleic acid increases the dilational modulus by forming densely packed mixed adsorption layer with surfactant molecules, while the superfluous addition of oleic acid could decrease the dilational modulus mainly due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules.     

The effect of fluorination: a crystallographic and computational study of mesogenic alkyl 4-[2-(perfluorooctyl)ethoxy]benzoates

The series of alkyl 4-[2-(perfluorooctyl)ethoxy]benzoates (F8-n) shows a systematic change of crystal structures depending on the length of the alkyl chain: separate packing of perfluorooctyl (Rf) and alkyl (Rh) chains from each other for shorter (n=2) and longer (n=11) members, alternate packing of Rf and Rh chains for middle (n=6,7) members, and an intermediate type of packing for n=4. Semiempirical MO calculations show slightly repulsive interactions between the Rf chains, and attractive ones between Rf and Rh chains and between Rh and the core of a molecular pair. It is concluded that fluorination determines the molecular shape of the crystal structures by making the chain rigid. It is confirmed that the interactions between Rf chains are small compared with those between other moieties and that they are forced to aggregate owing to the exclusion from other moieties. Thus, the effect is dependent on the geometries and intermolecular interactions of the other moieties.     

The structure of mixed nonionic surfactant monolayers at the air-water interface: the effects of different alkyl chain lengths

The structure of mixed nonionic surfactant monolayers of monodecyl hexaethylene glycol (C10E6) and monotetradecyl hexaethylene glycol (C14E6) adsorbed at the air-water interface has been determined by specular neutron reflectivity. Using partial isotopic labeling (deuterium for hydrogen) of the alkyl and ethylene oxide chains of each surfactant, the distribution and relative positions of the chains at the interface have been obtained. The packing of the two different alkyl chain lengths results in structural changes compared to the pure surfactant monolayers. This results in changes in the relative positions of the alkyl chains and of the ethylene oxide chains at the interface. The role of the alkyl chain length is contrasted with that of the ethylene oxide chain length, determined from results reported previously on the nonionic surfactant mixture of monododecyl triethylene glycol (C12E3) and monododecyl octaethylene glycol (C12E8).     

Relationship between alignment layer polymer surface structures and liquid crystal display parameters

The polar alignment layer (AL) surface provided relatively small liquid crystal (LC) pretilt angles while polyimides with long alkyl side chains gave relatively large LC pretilt angles. The results suggest that LC pretilt angles, in addition to an anchoring effect, are greatly affected by both electronic and steric interactions between LC molecules and a polyimide alignment layer surface. Rubbing with a cotton cloth induces functional groups, side chains, and repeat units at the surface of a liquid crystal polyimide AL to re-orient. It was discovered that rubbing induced polar functional groups and repeat units to re-orient out-of-the-plane of the surface, and it made non-polar aliphatic side chains partially re-orient inwards, toward the bulk of the film.     

Ultrasmall biocompatible nanocomposites: a new approach using seeded emulsion polymerization for the encapsulation of nanocrystals

We report a novel approach of seeded emulsion polymerization in which nanocrystals are used as seeds. Ultrasmall biocompatible polymer-coated nanocrystal with sizes between 15 and 110 nm could be prepared in a process that avoids any treatment with high shear forces or ultrasonication. The number of nanocrystals per seed, the size of the seeds, and the shell thickness can be independently adjusted. Single encapsulated nanocrystals in ultrasmall nanobeads as well as clusters of nanocrystals can be obtained. Polysorbat-80 was used as surfactant. It consists of poly(ethylene glycol) (PEG) chains, giving the particles outstanding biofunctional characteristics such as a minimization of unspecific interactions.     

Clouding phenomenon and SANS studies on tetra-n-butylammonium dodecylsulfate micellar solutions in the absence and presence of salts

Clouding phenomenon in aqueous micellar solutions of an anionic surfactant tetra-n-butylammonium dodecylsulfate (TBADS) has been observed as a function of surfactant concentration. Small-angle neutron scattering (SANS) experiments in these systems show clustering of micelles as the temperature approaches the cloud point (CP). The individual micelles and the clusters of micelles coexist at CP. The clustering of micelles depends on the surfactant concentration and temperature. It is proposed that clustering is due to depletion of H-bonded water present around the butyl chains at the micellar surface. This is associated with entropy gain which is considered to be the major thermodynamic factor related to micellar aggregation. The structures (clusters) that emerge depend on the relative lengths of the alkyl chains of the counterion and can be tuned by the temperature.     

Control over calcium carbonate phase formation by dendrimer/surfactant templates

Poly(propylene imine) dendrimers that are modified with long alkyl chains self-assemble to form well-defined aggregates. The geometry and surface chemistry of the dendrimer assemblies can be varied through the addition of surfactants. These dendrimer/surfactant aggregates can be tuned to template the formation of the different phases of calcium carbonate. The use of octadecylamine results in the formation of polyhedral aggregates that become embedded within an amorphous calcium carbonate phase that persists in competition with the thermodynamic product, calcite. In combination with hexadecyltrimethylammonium bromide, small spherical aggregates are formed that induce the formation of vaterite. The use of the negatively charged surfactant SDS results in growth retardation by the Ca(2+)-induced agglomeration of dendrimer/surfactant aggregates into giant spherical particles. Eventually these particles become overgrown by rhombohedral calcite.     

三种不同分子结构阴离子表面活性剂胶束微结构的NMR研究

用核磁共振测定自旋-晶格、自旋-自旋弛豫时间(t₁,t₂)、自扩散系数(D),用2DNOESY技术对正十四烷基硫酸钠、β-戊基壬烷基硫酸钠和β-戊基壬烷基聚氧乙烯醚(4)硫酸钠三类阴离子表面活性剂水溶液进行了观测,烷烃链各基团的t₂/t₁值给出了这三类分子形成各自胶束的水合层位点信息以及烷烃链在胶束内核中堆积程度的比较,自扩散系数结果表明,β-戊基壬烷基硫酸钠比正十四烷基硫酸钠形成的胶束的水合动力学半径小,但β-戊基壬烷基聚氧乙烯醚(4)硫酸钠形成的胶束水合动力学半径明显大于其它两类表面活性剂胶束,2DNOESY谱图提供了β-戊基壬烷基聚氧乙烯醚(4)硫酸钠分子中聚氧乙烯基键在胶束外层卷曲排列的信息.     

The photodimerization of a cinnamoyl moiety derivative in dilute solution based on the intramolecular chain interaction of gemini surfactant

A Gemini surfactant, sodium N, N'-di(4-n-butyloxy cinnamoly)-L-cystine, containing a cinnamoyl moiety in the alkyl chains and disulfide bond in the spacer was designed and synthesized. The incorporation of a cinnamoyl moiety into the alkyl chains of Gemini surfactant makes it easy to probe the conformational information of the amphiphile molecule. The UV/vis absorption spectra and steady-state fluorescence were investigated at a concentration far below the critical micelle concentration (cmc). Both blue-shift of absorption and red-shift of fluorescence emission spectra indicate the existence of intramolecular interaction between the two alkyl chains in Gemini surfactant in the singly dispersed state. Results based on the breakdown of the disulfide bond by dithiotheritol (DTT) further confirmed the conclusion. Moreover, the characteristic of intramolecular chain interaction in Gemini surfactant improves the topochemical geometrical requirements of cinnamoyl moiety and increases the local concentration of reactant in dilute solution. Utilizing the incorporation of cinnamoyl moiety into the alkyl chains of Gemini surfactant, the cinnamoyl moiety upon irradiation undergoes dimerization in dilute aqueous solution with high yield of 78%.