Zinc oxide catalyzed growth of single-walled carbon nanotubes

We demonstrate that zinc oxide can catalyze the growth of single-walled carbon nanotubes (SWNTs) with high efficiency by a chemical vapor deposition process. The zinc oxide nanocatalysts, prepared using a diblock copolymer templating method and characterized by atomic force microscopy (AFM), were uniformly spaced over a large deposition area with an average diameter of 1.7 nm and narrow size distribution. Dense and uniform SWNTs films with high quality were obtained by using a zinc oxide catalyst, as characterized by scanning electron microscopy (SEM), Raman spectroscopy, AFM, and high-resolution transmission electron microscopy (HRTEM).     

New aspects on pulsed laser deposition of aligned carbon nanotubes

We have grown carbon nanotubes (CNT) by pulsed laser deposition (PLD) at 1000 °C in Ar atmosphere. A Nd/YAG laser was used for irradiation of a graphite target containing Ni and Co rods. High-resolution scanning electron microscopy (HRSEM) and transmission electron microscopy (TEM) images showed that “closed” carbon nanotubes were grown between clusters of metallic particles, so that the individual nanotubes were arranged in parallel to each other forming a shape of “Rope-Bridge”. The nanotubes structure was analyzed by high-resolution transmission electron microscopy (HRTEM) and their type was found to be of MWNT, containing about five SWNT. Total diameter was 5-20 nm and their length was about 1 μm. High homogeneous distribution carbon nanotubes were grown and different structures were observed such as well-aligned carbon nanotubes, bamboo-like and Y-junction carbon nanotubes.     

Filling of single-walled carbon nanotubes by CuI nanocrystals via capillary technique

The present study is focused on the synthesis and investigation of the nanocomposite CuI@SWNT obtained by the filling of metallic single-walled carbon nanotubes (SWNTs) (inner diameter 1–1.4 nm) by wide-gap semiconducting CuI nanocrystals using so-called capillary technique. The method is based on the impregnation of pre-opened SWNTs by molten CuI in vacuum with subsequent slow cooling to room temperature. SWNTs and CuI@SWNT nanocomposites were studied by nitrogen capillary adsorption method, EDX microanalysis, HRTEM microscopy and Raman spectroscopy. The changing of electronic properties of CuI@SWNT as compare to row nanotubes was observed.     

Multi-walled boron nitride nanotubes composed of diverse cross-section and helix type shells

High-resolution transmission electron microscopy (HRTEM) and electron diffraction analysis were performed on pure multi-walled novel type boron nitride nanotubes (BNNTs) by using a field-emission high-resolution 300 kV transmission electron microscope JEM-3100FEF (Omega filter). In contrast to commonly observed monochiral multi-walled BNNTs, the present tubular shells within every individual BNNT (up to ～50 shells) revealed the whole range of helixes, i.e., from zig-zag to arm-chair. This being paired with the wide variations in cross-sectional tubular shapes, i.e., from a faceted polygon to a cylinder, results in complex overall tubular structures. The BN atomic lattice fringe separations, down to 1.25 Å, on most symmetrical arm-chair (d_10-10=1.25 Å) and zig-zag (d_11-20=2.15 Å) tubular wall fragments within the same multi-walled BN nanotubes were ultimately achieved during HRTEM.     

Chemical polishing method of GaAs specimens for transmission electron microscopy

A practical method for transmission electron microscopy specimen preparation of GaAs-based materials with quantum dot structures is presented to show that high-quality image observations in high-resolution transmission electron microscopy (HRTEM) can be effectively obtained. Specimens were prepared in plan-view and cross-section using ion milling, followed by two-steps chemical fine polishing with an ammonia solution (NH₄OH) and a dilute H₂SO₄ solution. Measurements of electron energy loss spectroscopy (EELS) and atomic force microscopy (AFM) proved that clean and flat specimens can be obtained without chemical residues. HRTEM images show that the amorphous regions of carbon and GaAs can be significantly reduced to enhance the contrast of lattice images of GaAs-based quantum structure.     

Synthesis of multi-wall carbon nanotubes by the pyrolysis of ethanol on Fe/MCM-41 mesoporous molecular sieves

Ordered hexagonal arrangement MCM-41 mesoporous molecular sieves were synthesized by the traditional hydrothermal method, and Fe-loaded MCM-41 mesoporous molecular sieves (Fe/MCM-41) were prepared by the wet impregnation method. Their mesoporous structures were testified by X-ray diffraction (XRD) and the N₂ physical adsorption technique. Carbon nanotubes (CNTs) were synthesized by the chemical vapor deposition (CVD) method via the pyrolysis of ethanol at atmospheric pressure using Fe/MCM-41 as a catalytic template. The effect of different reaction temperatures ranging from 600 to 800 ^°C on the formation of CNTs was investigated. The resulting carbon materials were characterized by various physicochemical techniques such as transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. The results show that multi-wall carbon nanotubes (MWCNTs) with an internal diameter of ca. 7.7 nm and an external diameter of ca. 16.9 nm were successfully obtained by the pyrolysis of ethanol at 800 ^°C utilizing Fe/MCM-41 as a catalytic template.     

High-density attachment of FePt nanoparticles on carbon nanotubes by a facile microwave-assisted polyol method

High-density attachment and one-dimensional (1D) array of FePt nanoparticles (NPs) along carbon nanotubes (CNTs) surface to generate FePt/CNT nanocomposites were successfully obtained via a facile CNT-mediated microwave polyol method. The as-prepared 1D FePt/CNTs is about 10–20 nm in diameter and up to μm scale in length. By adjusting the solvents, the ratio of Fe/Pt and the attached density of FePt NPs on the surface of CNTs could be well controlled. The structures, composition, and magnetic properties of the FePt/CNTs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and magnetic measurements. The possible growth mechanism has also been proposed.     

Migration-enhanced epitaxy (MEE) growth of five-layer asymmetric coupled quantum well (FACQW) and its cross-sectional STM observation

The five-layer asymmetric coupled quantum well (FACQW) is a new potential-tailored quantum well that is promising for ultra-fast and ultra-low-voltage optical modulators and switches. FACQW samples were grown by the migration-enhanced epitaxy (MEE) and the conventional molecular beam epitaxy methods with steep and flat heterointerfaces in the monolayer accuracy. They were characterized with the cross-sectional scanning tunneling microscopy (STM). In the cross-sectional STM image, double-stripe structures with different contrast were observed. The stripe area corresponds to the FACQW (about 10 nm wide), sandwiched with the AlGaAs barrier layers (15 nm wide). A dark line observed at the middle of the FACQW stripe area corresponds to the 3-monolayer-thick AlAs layer. The cross-sectional STM images of the high-quality heterointerface FACQW structures were successfully observed for the samples grown by the MEE method. More detailed studies of this kind of cross-sectional STM observations will be very effective to obtain the optimized growth conditions for fine and complicated ultra-thin structures.     

Local spectroscopy and atomic imaging of tunneling current, forces, and dissipation on graphite

Theory predicts that the currents in scanning tunneling microscopy (STM) and the attractive forces measured in atomic force microscopy (AFM) are directly related. Atomic images obtained in an attractive AFM mode should therefore be redundant because they should be similar to STM. Here, we show that while the distance dependence of current and force is similar for graphite, constant-height AFM and STM images differ substantially depending on the distance and bias voltage. We perform spectroscopy of the tunneling current, the frequency shift, and the damping signal at high-symmetry lattice sites of the graphite (0001) surface. The dissipation signal is about twice as sensitive to distance as the frequency shift, explained by the Prandtl-Tomlinson model of atomic friction.     

Analysis of the healthy rabbit lens surface using MAC Mode atomic force microscopy

In this investigation healthy rabbit crystalline lenses were characterized by atomic force microscopy (AFM). The lenses were cut in slices with thickness with 1mm and thus, put after cortex distinct regions of nucleus and cortex for AFM examination. AFM analysis were carried out using a PicoSPM I operating in Mac Mode. We obtained topographic images of rabbit lenses and a quantitative analysis of the width and height of fibers for nucleus and cortex regions. The longitudinal section analysis of fibers in the nucleus region indicated structures with an average width of 200nm and average height of 200nm. The intershells distance was determined as 4microm. Fiber cell cross-section dimensions, longitudinal and transverse widths, could be estimated in these regions from the AFM images. Structures with average widths as small as 1.0microm are observed in the nucleus; the intershell distance is 4.0microm. In cortical regions, hexagonal structures with average longitudinal and transverse widths of 5.0mum and 3.0mum, respectively, were identified. Three-dimensional images of tissue sections with resolution on a nanometer scale were obtained. The potential of AFM analysis for characterizing healthy and pathologic lens tissues is discussed.     

Scanning tunneling and atomic force microscopy study of the misfit layer compounds (LaS)1.14(NbS2)n (n=1, 2) and [(Pb,Sb)S)]1.14NbS2

The misfit layer compounds (LaS)_1.14(NbS₂)_n (n=1, 2) and [(Pb,Sb)S]_1.14NbS₂ were examined by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). In these compounds the NaCl-type double MS (M=La, Pb, Sb) layers (Q layers) alternate with the NbS₂ layers (H layers) made up of NbS₆ trigonal prisms. It was possible to record AFM and STM images for only the H layers for (LaS)_1.14(NbS₂)_n, but for both the H- and Q-layers for [(Pb,Sb)S]_1.14NbS₂. Partial and total electron density plots of the H and Q layers were calculated to interpret the observed STM and AFM images. The bright spots in the STM and AFM images of the H layer correspond to S atoms, and those of the Q layer to Pb and Sb atoms. The STM images for the Q layers of [(Pb,Sb)S]_1.14NbS₂ suggest that a short-range ordering of the Pb and Sb atoms occurs in the (Pb,Sb)S sheets of the Q layer.     

埃洛石纳米管负载Ni纳米粒子的研究

以天然纳米管埃洛石为载体,以Sn-Pd胶体溶液作为活化剂,利用化学镀法在埃洛石的内表面镀金属Ni。利用XRD、TEM对合成的产物进行分析表征,表明在埃洛石纳米管的内腔沉积了颗粒连续、尺寸大小约为10nm的Ni粒子,而HRTEM分析表明Ni微粒为纳米晶体。良好分散性能的镍-埃洛石纳米复合材料将会在高效催化剂、润滑剂、传感器,高密度磁记录材料等领域有潜在的应用前景。     

Scanning probe microscopy study of exfoliated oxidized graphene sheets

Exfoliated oxidized graphene (OG) sheets, suspended in an aqueous solution, were deposited on freshly cleaved HOPG and studied by ambient AFM and UHV STM. The AFM images revealed oxidized graphene sheets with a lateral dimension of 5–10 μm. The oxidized graphene sheets exhibited different thicknesses and were found to conformally coat the HOPG substrate. Wrinkles and folds induced by the deposition process were clearly observed. Phase imaging and lateral force microscopy showed distinct contrast between the oxidized graphene and the underlying HOPG substrate. The UHV STM studies of oxidized graphene revealed atomic scale periodicity showing a (0.273 ± 0.008) nm × (0.406 ± 0.013) nm unit cell over distances spanning few nanometers. This periodicity is identified with oxygen atoms bound to the oxidized graphene sheet. I(V) data were taken from oxidized graphene sheets and compared to similar data obtained from bulk HOPG. The dI/dV data from oxidized graphene reveals a reduction in the local density of states for bias voltages in the range of ±0.1 V.     

Folding and cracking of graphene oxide sheets upon deposition

Graphene Oxide (GO) sheets, suspended in an aqueous solution, were deposited on freshly cleaved highly oriented pyrolytic graphite (HOPG) and studied using Raman spectroscopy, atomic force microscopy (AFM) and scanning tunneling microscopy (STM). AFM phase imaging shows a distinct contrast between GO and the underlying HOPG substrate. Raman spectroscopy clearly showed the presence of GO sheets on the top of HOPG substrate. The AFM and STM images also reveal wrinkling, folding, and tearing of individual GO sheets after depositing onto an HOPG substrate. We have also observed a distinct cracking of a GO sheet after folding. We attribute this new cracking phenomenon to a weakening of C–C bonds during the oxidation of a graphene sheet.     

Direct measurement of electron transport features in cytochrome c via V–I characteristics of STM currents

The morphology of and electron tunneling through single and cluster cytochrome c molecules deposited on self-assembled dodecanthiol monolayer film on a gold substrate have been studied experimentally using scanning tunneling microscopy (STM) and scanning tunneling spectroscopy. STM images of a single cytochrome c molecule revealed a globular structure with a diameter of 4 nm and height of 1.5 nm. A spectroscopic study obtained by recording tunneling current–bias voltage (V–I) curves revealed that the STM current increases stepwise at asymmetric threshold sample bias voltages of +100 mV and –200 mV.     

A simple method for the preparation of colloidal polymer-supported silver nanoparticles

Polysulfone?silver composite nanoparticles have been prepared by combining polymer nanoprecipitation and redox synthesis of silver, in the presence of a glucose-modified cyclosiloxane as stabilizing agent. Based on previous kinetic investigations and on model reactions, we concluded that the reducing agent in this case is the tetrahydrofuran (THF) used as solvent for polysulfone. Dynamic light scattering measurements on the obtained polymer-silver composite particles indicated particle average diameter of 176 nm with a polydispersity index of 0.25. The UV–vis spectrum exhibited the silver plasmon resonance. By different microscopic methods (atomic force microscopy—AFM, high resolution transmission electron microscopy—HRTEM, and scanning electron microscopy—SEM), larger polymer particles coated with silver nanoprticles were observed. The Energy Dispersive X-Ray analysis—EDX; confirmed the presence of Ag on the surface of the particles, while the selected area electron diffraction showed single crystalline silver nanospheres with face-centered cubic structure.     

Surface and interfacial structural characterization of MBE grown Si/Ge multilayers

Si/Ge multilayer structures have been grown by solid source molecular beam epitaxy (MBE) on Si (1 1 1) and (1 0 0) substrates and were characterized by high-resolution X-ray diffraction (XRD), atomic force microscopy (AFM), high-depth-resolution secondary ion mass spectroscopy (SIMS) and cross-section high-resolution transmission electron microscopy (HRTEM). A reasonably good agreement has been obtained for layer thickness, interfacial structure and diffusion between SIMS and HRTEM measurements. Epitaxial growth and crystalline nature of the individual layer have been probed using cross-sectional HRTEM and XRD measurements. Surface and interface morphological studies by AFM and HRTEM show island-like growth of both Si and Ge nanostructures.     

Determination of C60/C70 ratios in fullerene mixtures and film characterization by scanning tunneling microscopy

Fullerene powder mixtures with different C₆₀/C₇₀ ratios have been analyzed by a variety of techniques, and results have been compared. The fullerence mixtures have been characterized as solutions in n-hexane by high-pressure liquid chromatography (HPLC) and UV-VIS spectroscopy. Thin films of fullerenes on Au(111) have been prepared from the mixtures by sublimation. The sublimation process has been studied by simultaneous thermogravimetric and differential thermal analyses. Thin fullerene films on Au(111) have been investigated by scanning tunneling microscopy (STM). The STM images show primarily two types of ballshaped molecules arranged in a lattice with hexagonal symmetry (fcc(111) face, nearest neighbour distance: 1 nm). The two species differ in diameter. STM images of films made of mixtures of different C₆₀/C₇₀ ratios show that C₇₀ molecules display a larger apparent diameter (0.8 nm) and corrugation than C₆₀ molecules (0.7 nm). The C₆₀/C₇₀ ratios obtained by counting the corresponding molecular species in the STM images of the thin films are compared to the C₆₀/C₇₀ ratios determined by HPLC on hexane solutions of the mixtures. The observed differences might be explained by different rates of sublimation for the two species. The STM images reveal film defects (vacancies and boundaries) and dynamic processes (displacement of C₇₀ molecules and vacancies). In films prepared to have a C₆₀ coverage of less than one monolayer, stable structural units of the C₆₀(111) surface consisting of three or seven C₆₀ molecules are revealed by STM. Occasionally, substructure within individual fullerene molecules is observed.     

Catalyst-free growth of amorphous silicon nanowires by laser ablation

Carbon nanotubes (CNTs) appear to be ideal tip materials of atomic force microscopy (AFM) due to their small diameter and high stiffness. In this study, double-walled carbon nanotube (DWCNT) structures with different lengths of inner and outer layers are proposed as AFM tips. Both the vibration response and mode shapes of the tipped nanotubes under axial compression are studied by a theoretical nanobeam model. The results show that the natural frequencies of DWCNTs are significantly affected by the compressive loads and the length difference between the inner and outer nanotubes. The natural frequency associated with certain vibrational modes decreases with increasing compressive loads. This research may provide a useful reference for practical design for AFM tips with CNTs.     

Atomic correlation between adjacent graphene layers in double-wall carbon nanotubes

Atomic correlation between adjacent graphene layers was elucidated for double-wall carbon nanotubes (DWNTs) through a chiral index assignment of two nested nanotubes by high-resolution transmission electron microscopy. Our analysis provides a rather constant diameter difference close to 0.75 nm but no chiral angle correlation between the constituent nanotubes in the concentric DWNTs. The local atomic correlation as a commensurate graphene stacking was repeatedly found in eccentric DWNTs and circumscribed nanotubes, which should lead to elastic deformation and bundling of nanotubes.