The reaction of carbon and water as catalyzed by a nickel surface

Many of the individual steps which make up the reaction of carbon and water to produce CO and H₂ were studied on a nickel foil surface using temperature-programmed reaction spectroscopy (TPRS), Auger electron spectroscopy (AES), and ultraviolet photoelectron spectroscopy (UPS). Surface graphite and carbide, two metastable surface carbon forms, were prepared by dehydrogeneration of C₂H₂ and served as reactant carbon. UPS of the graphite monolayer in contact with the metal yielded a valence electronic structure that could be interpreted in terms of the bulk band structure of graphite. The fully carbided Ni surface was active for H₂O dissociation with an estimated activation energy ≤ 5 kcal/mol. The reaction of graphitic carbon in contact with the nickel surface and adsorbed oxygen occurs directly without isolated prior breaking of carbon-carbon bonds. The estimated activation energy for the direct reaction was 44 kcal/mol. A different catalytic reaction cycle involving carbon-carbon bond breaking followed by oxidation of the carbide is energetically more demanding. The activation energy for direct carbon-carbon bond breaking was estimated to be between 65 and 70 kcal/mol. Following this demanding step, the reaction between carbidic carbon and oxygen proceeded with estimated activation energy of 31 kcal/mol.     

A theoretical study of hydrogen adsorption on Li, Be, Na, and Mg atoms attached to aromatic hydrocarbons

The binding energy of a hydrogen molecule on metal atoms (Li, Be, Na, and Mg) attached to aromatic hydrocarbon molecules (benzene and anthracene) was calculated using an ab initio molecular orbital method at the MP2(FC)/cc-pVTZ level with basis set superposition error (BSSE) correction. The energy tended to become more negative as the metal atom had a more positive charge and a smaller radius. The energies of Li₂C₆H₆-H₂, Li₂C₁₄H₁₀-H₂, Na₂C₁₄H₁₀-H₂, and MgC₁₄H₁₀-H₂ were −2.7 to −2.2, −4.0 to −3.1, −2.8 to −0.3, and −1.3 kcal/mol, respectively. Most of these energies were more negative than those on the hydrocarbons without metal atoms (ca. −1 kcal/mol). Analyzing the Lennard–Jones type potential with the parameters determined by the MP2 calculations, it was found that these energies mainly consisted of the induction force caused by the positive charge of the metal atom and the dispersion force from the nearest C₆-ring. The energy of BeC₁₄H₁₀-H₂ was more negative (−8.6 kcal/mol) than of the other complexes. The hydrogen molecule in this complex had a comparatively longer H–H distance and a more positive H₂ charge than the others. These data suggest that the hydrogen adsorption on this complex involves a charge transfer process in addition to physisorption interactions. The hydrogen binding energies in some Li₂C₁₄H₁₀-H₂ systems (∼−4.0 kcal/mol) and BeC₁₄H₁₀-H₂ are promising to operate hydrogen storage/release at ambient temperature with moderate pressure.     

Interaction of O2, CO2, CO,C2H4 and C2H4O with Ag(110)

The interaction of O₂, CO₂, CO, C₂H₄ AND C₂H₄O with Ag(110) has been studied by low energy electron diffraction (LEED), temperature programmed desorption (TPD) and electron energy loss spectroscopy (EELS). For adsorbed oxygen the EELS and TPD signals are measured as a function of coverage (θ). Up to θ = 0.25 the EELS signal is proportional to coverage; above 0.25 evidence is found for dipole-dipole interaction as the EELS signal is no longer proportional to coverage. The TPD signal is not directly proportional to the oxygen coverage, which is explained by diffusion of part of the adsorbed oxygen into the bulk. Oxygen has been adsorbed both at pressures of less than 10^-4 Pa in an ultrahigh vacuum chamber and at pressures up to 10³ Pa in a preparation chamber. After desorption at 10³ Pa a new type of weakly bound subsurface oxygen is identified, which can be transferred to the surface by heating the crystal to 470 K. CO₂ is not adsorbed as such on clean silver at 300 K. However, it is adsorbed in the form of a carbonate ion if the surface is first exposed to oxygen. If the crystal is heated this complex decomposes into O_ad and CO₂ with an activation energy of 27 kcal/mol(1 kcal = 4.187 kJ). Up to an oxygen coverage of 0.25 one CO₂ molecule is adsorbed per two oxygen atoms on the surface. At higher oxygen coverages the amount of CO₂ adsorbed becomes smaller. CO readily reacts with O_ad at room temperature to form CO₂. This reaction has been used to measure the number of O atoms present on the surface at 300 K relative to the amount of CO₂ that is adsorbed at 300 K by the formation of a carbonate ion. Weakly bound subsurface oxygen does not react with CO at 300 K. Adsorption of C₂H₄O at 110 K is promoted by the presence of atomic oxygen. The activation energy for desorption of C₂H₄O from clean silver is ～ 9 kcal/mol, whereas on the oxygen-precovered surface two states are found with activation energies of 8.5 and 12.5 kcal/mol. The results are discussed in terms of the mechanism of ethylene epoxidation over unpromoted and unmoderated silver.     

Adsorption of carbon monoxide,oxygen, hydrogen,nitrogen, ethylene and benzene on an iridium (110) surface; Correlation with other iridium crystal faces

The interaction of CO, O₂, H₂, N₂, C₂H₄ and C₆H₆ with an Ir(110) surface has been studied using LEED, Auger electron spectroscopy and flash desorption mass spectroscopy. Adsorption of oxygen at 30°C produces a (1× 2) structure, while a c(2 × 2) structure is formed at 400°C. Two peaks have been detected in the thermal desorption spectrum of oxygen following adsorption at 30°C. The heat of adsorption of hydrogen is slightly higher on Ir(110) than on Ir(111). Adsorption of carbon monoxide at 30°C produces a (2 × 1) surface structure. The main CO desorption peak is found around 230, while two other desorption peaks are observed around 340 and 160°C. At exposures between 250 and 500°C carbon monoxide adsorption yields a c(2 × 2) structure and a desorption peak around 600°C. Carbon monoxide is adsorbed on an Ir(110) surface partly covered with oxygen or carbon in a new binding state with a significantly higher desorption temperature than on the clean surface. Adsorption of nitrogen could not be detected on either clean or on carbon covered Ir(110) surfaces. The hydrocarbon molecules do not form ordered surface structures on Ir(110). The thermal desorption spectra obtained after adsorption of C₆H₆ or C₂H₄ are similar to those reported previously for Ir(111) consisting mostly of hydrogen. Heating the (110) surface above 700°C in the presence of C₆H₆ or C₂H₄ results in the formation of an ordered carbonaceous overlayer with (1 × 1) structure. The results are compared with those obtained previously on the Ir(111) and Ir(755) or stepped [6(111) × (100)] surfaces. The CO adsorption results are discussed in relation to data on similar surfaces of other Group VIII metals.     

The hydrogenated aluminium trimer: a theoretical examination of the formation and interconversion pathways

Five doublet isomers of the Al₃H₂ cluster lying within a narrow range of 5 kcal/mol, along with the isomerization transition states connecting them, have been located with the coupled-cluster CCSD(T) and DFT methods. The two most stable doublet structures, the C_2v planar including the two Hs bound terminally and C₁ non-planar showing one H in terminal site and the other in threefold site are found to be essentially degenerate. Although the reaction of Al₃ with H₂ to yield Al₃H₂ is found to be significantly exothermic, by 23.5 kcal/mol, this hydrogenation is impeded by a considerable kinetic barrier of 16 kcal/mol. Our result is consistent with the observed lack of reactivity of Al_n towards H₂(D₂) for n=3 under thermal conditions [3]. The quartet Al₃H₂ isomers are predicted to lie 16–21 kcal/mol higher in energy than the doublet analogues. Further dimerization of Al₃H₂ to form Al₆H₄ has also been examined. Electronic supplementary material Supplementary Online Material     

The interaction of fast H 3 + ions with a clean Ni-surface

Scattering of H ₃ ⁺ ions from a clean Ni(111) surface is observed at energies below 1 keV and grazing incidence in a time-of-flight system. The interaction with the surface leads to neutral particles mainly which are identified from the energy distributions as H and H₂. The neutralisation/dissociation mechanism is probably a resonant charge transfer of Ni electrons into the non-binding ground state of H₃.     

Benzene adsorption on nickel (100) and (111) faces studied by leed and high resolution electron energy loss spectroscopy

Studies of benzene (C₆H₆ and C₆D₆) adsorption have been performed by high resolution electron energy loss spectroscopy (HRELS) and LEED experiments on nickel (100) and (111) single crystal faces at room temperature. Chemisorption induces ordered structures, c(4 × 4) on Ni(100) and (2√3 × 2√3)R30° on Ni(111), and typical energy loss spectra with 4 loss peaks accurately identified with the strongest infrared vibration bands of the gazeous molecules. Benzene chemisorption preserves the aromatic character of the molecule and involves respectively 8 nickel surface atoms on the (100) face and 12 on the (111) face by adsorbed molecule. The interaction takes place via the π electrons of the ring. Significant shifts of the CHτ bending and CH stretching vibrations show a weakening of the CH bonds due to the formation of the chemisorption bond and a coupling of H atoms with the nickel substrate.     

Chemisorption of hydrogen on titanium: Embedding theory and comparisons with small clusters

The chemisorption of H₂ on Ti(0001) is treated using an ab initio CI theory for the surface region. Dissociation of H₂ occurs above the surface but more stable 3-fold coordination sites lie closer to the surface at ～ 1.3 Å. Adsorption in adjacent 3-fold sites is less stable than in separated sites sharing only one surface atom. The calculated adsorption energy of 45 kcal/mol H₂ compares favorably with experiment. Bonding involves mainly the 4s electrons of the metal leading to hydridic hydrogens and a polarized lattice electron distribution, but d bonding and correlation effects significantly increase the binding energy. Calculations on small metal clusters also show dissociative adsorption but much larger hydrogen binding energies are obtained.     

Mechanistic insights into C‐C cross coupling activities of Pd/Ni‐doped heterofullerenes

Mechanistic insights into Heck and Suzuki‐Miyaura cross coupling reactions with C₅₉M (M = Pd/Ni) catalysts were developed. Density functional theory was used for the analysis of all the intermediates and transition states possible during C‐C cross coupling reactions over the catalysts under study. Oxidative addition, a step common to both Heck and Suzuki‐Miyaura cross coupling reactions, was observed to proceed with smaller activation barriers over C₅₉Pd. Heck coupling of iodobenzene with styrene was observed to proceed via oxidative addition, migratory insertion, and reductive elimination steps. The free energy barriers for oxidative addition, migratory insertion, and reductive elimination steps were 14.8, 11.6, and 4.8 kcal/mol, respectively, over C₅₉Pd, and 17.4, 79.3, and 17.4 kcal/mol, respectively, over C₅₉Ni, indicating oxidative addition and migratory insertion to be the rate‐determining steps over C₅₉Pd and C₅₉Ni, respectively. Similarly for Suzuki‐Miyaura coupling reaction, activation barriers for oxidative addition, transmetalation, and reductive elimination steps were 14.8, 52.4, and 7.9 kcal/mol, respectively, over C₅₉Pd, and 17.4, 64.7, and 60.2 kcal/mol, respectively, over C₅₉Ni, indicating transmetalation step to be the rate‐determining step over both the heterofullerenes.     

Studying the effect of hydrogen on diamond growth by adding C10H10Fe under high pressures and high temperatures

In this paper, hydrogen-doped industrial diamonds and gem diamonds were synthesized in the Fe–Ni–C system with C₁₀H₁₀Fe additive, high pressures and high temperatures range of 5.2–6.2?GPa and 1250–1460°C. Experimental results indicate similar effect of hydrogen on these two types of diamonds: with the increasing content of C₁₀H₁₀Fe added in diamond growth environment, temperature is a crucial factor that sensitively affects the hydrogen-doped diamond crystallization. The temperature region for high-quality diamond growth becomes higher and the morphology of diamond crystal changes from cube-octahedral to octahedral. The defects on the {100} surfaces of diamond are more than those on the {111} surfaces. Fourier transform infrared spectroscopy (FTIR) results indicate that the hydrogen atoms enter into the diamond crystal lattice from {100} faces more easily. Most interestingly, under low temperature, nitrogen atoms can also easily enter into the diamond crystal lattice from {100} faces cooperated with hydrogen atoms.     

Hartree-Fock-Slater-LCAO studies of the acetylene-transition metal interaction: I. Chemisorption on Ni surfaces; cluster models

The interaction of C₂H₂ with Ni surfaces has been studied by the Hartree-Fock-Slater-LCAO method (with core pseudopotentials). Different adsorption sites (π, di-σ, μ₂, μ₃) at the Ni(111) surface have been modelled by clusters of 1 to 4 Ni atoms; the structure of C₂H₂ and the Ni-C distance have been varied (3 structures, 2 distances). The acetylene-metal bonding can be interpreted in terms of π to metal donation and, especially, metal to π¹ back donation effects which considerably weaken the C-C bond. These effects become increasingly important when more metal atoms are directly involved in the adsorption bonding: π < di-σ < μ₂ < μ₃. The calculated shifts in the ionization energies are in fair agreement with the experimentally observed shifts (by UPS) for C₂H₂ adsorbed on Ni(111) (and other Ni surfaces); these shifts do not depend very sensitively on the bonding situation, however, so that we could not assign the structure of adsorbed C₂H₂ solely on this basis. From the comparison between the measured C-C stretch frequency (by ELS) and the calculated C-C overlap populations, using a relation calibrated on Ni-acetylene complexes, we find that μ₃ bonding of C₂H₂ with a Ni-C distance of about 1.9 Å is most probable on the Ni(111) surface; the CCH angle is estimated to be somewhat smaller than 150°. We have suggested an explanation for the surface specific dissociation of C₂H₂: C₂ fragments (C-H bond breaking) have been observed on stepped Ni surfaces (at low temperature), CH fragments (C-C bond breaking) have been found on ideal surfaces (at higher temperatures).     

A theoretical study of CHx chemisorption on the Ni(100) and Ni(111) surfaces

Cluster model calculations have been performed for CH_x, x = 0−3, chemisorbed on Ni(100) and Ni(111). The predicted chemisorption energies, at the present level of theory, based on bond-prepared clusters for Ni(100) are for carbon 150 kcal/mol, for CH 136 kcal/mol, for CH₂ 91 kcal/mol and for CH₃ 46 kcal/mol. The corresponding energies for Ni(111) are for CH 120 kcal/mol, for CH₂ 88 cal/mol and for CH₃ 49 kcal/mol. These chemisorption energies lead to similar stabilities for all CH_x fragments on both Ni(100) and Ni(111). Large basis sets and multi-reference correlation treatments are found to be very important in particular for the multiply bonded species. The vibrational C-H stretching frequencies predicted for CH_x on Ni(111) are for CH 3054 cm⁻¹ (2980 cm⁻¹), for CH₂ 3204 cm⁻¹ and for CH₃ 2709 cm⁻¹ (2680 cm⁻¹), where the available experimental values are given in parent The predicted ionization spectra of adsorbed CH_x are also in general agreement with experimental findings.     

Proton transfer reactions of hydrazine‐boranes

Hydrazine‐borane and hydrazine‐diborane contain, respectively, 15.4 and 16.9 wt% of hydrogen and are potential materials for hydrogen storage. In this work we present the gas‐phase complexation energies, acidities, and basicities of hydrazine‐borane and hydrazine‐bisborane calculated at MP2/6‐311 + G(d,p) level. We also report the release of dihydrogen from both protonated complexes (ΔG_{hydrazine‐borane} = ?20.9 kcal/mol and ΔG_{hydrazine‐bisborane} = ?27.2 kcal/mol) which is much more exergonic than from analogues amine‐boranes. The addition of the first BH₃ to the hydrazine releases 17.1 kcal/mol, and the second addition releases 15.8 kcal/mol. The attachment of BH₃ also increases the N―H acidity of hydrazine by 46.3 kcal/mol. It was found that the B―H deprotonation leads to intramolecular rearrangement. The basicity values for hydrazine‐borane and ‐bisborane are 180 and 172.8 kcal/mol, respectively. For both complexes the protonation centres are located at the boron moiety. The protonated structure of hydrazine‐bisborane is cyclic and can be described as H₂ captured between a negatively charged B―H hydrogen and positive boron (B―H??H2??B). Atoms in molecules analysis are used to investigate bond paths in concerning structures. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption of SH and OH and coadsorption of S, O and H on Ni(111)

The adsorption of SH and OH radicals on Ni(111) is treated using an ab initio embedding theory. The Ni(111) surface is modeled as a three-layer, 28-atom cluster with the Ni atoms fixed at bulk lattice sites. The Ni(111) energy surface is very flat for SH adsorption if the H tilt angle is allowed to vary. At both atop and bridge sites, the S---H axis is tilted away from the surface normal by 70°, resulting in the sulfur atom being sp³-hybridized and the adsorption energy being 59 kcal mol⁻¹. For SH at the three-fold site, the S---H axis is normal to the surface, the sulfur is sp-hybridized, and the adsorption energy is 58 kcal mol⁻¹. OH is preferentially adsorbed at the three-fold site. The calculated adsorption energy is 90 kcal mol⁻¹ and the O---H axis is perpendicular to the surface. OH adsorption at the atop and bridge sites is 16 and 5 kcal mol⁻¹ less stable than at the three-fold site, respectively. Atomic H, O and S are preferentially adsorbed at the three-fold site. The calculated adsorption energies are 62, 92 and 87 kcal mol⁻¹, for H, O and S, respectively. The calculated adsorbate---Ni bond distances of 1.86 Å for H, 1.86 Å for O and 2.29 Å for S are in good agreement with experimental data. SH and OH bonding to the surface involves a combination of ionic and covalent contributions and substantial mixing with the Ni 3d orbitals. Dipole-moment calculations indicate strong ionic bonding for the atomic O/Ni system and ionic plus covalent character for the atomic S/Ni interactions. Adsorption of S and O at the three-fold site blocks H adsorption at the nearby surface. Moving H away from the S or O adatom reduces the repulsion. The dissociation of SH_ad → S_ad + H_ad is calculated to be exothermic by 5 kcal mol⁻¹ and OH_ad → O_ad + H_ad to be endothermic by 30 kcal mol⁻¹ for infinite separation between S, O and H.     

Adsorption of hydrogen on palladium single crystal surfaces

The adsorption of hydrogen on clean Pd(110) and Pd(111) surfaces as well as on a Pd(111) surface with regular step arrays was studied by means of LEED, thermal desorption spectroscopy and contact potential measurements. Absorption in the bulk plays an important role but could be separated from the surface processes. With Pd(110) an ordered 1 × 2 structure and with Pd(111) a 1 × 1 structure was formed. Maximum work function increases of 0.36, 0.18 and 0.23 eV were determined with Pd(110), Pd(111) and the stepped surface, respectively, this quantity being influenced only by adsorbed hydrogen under the chosen conditions. The adsorption isotherms derived from contact potential data revealed that at low coverages θ ∞ √p_H2, indicating atomic adsorption. Initial heats of H₂ adsorption of 24.4 kcal/mole for Pd(110) and of 20.8 kcal/mole for Pd(111) were derived, in both cases E_ad being constant up to at least half the saturation coverage. With the stepped surface the adsorption energies coincide with those for Pd(111) at medium coverages, but increase with decreasing coverage by about 3 kcal/mole. D₂ is adsorbed on Pd(110) with an initial adsorption energy of 22.8 kcal/mole.     

Computational study of singlet and triplet sulfonylnitrenes insertion into the C―C or C―H bonds of ethylene

Formation of N‐sulfonylaziridines, N‐ethylidenesulfonamides, N‐vinylsulfonamides and 4,5‐dihydro‐1,2,3‐oxathiazole 2‐oxides by the reaction of singlet and triplet trifluoromethyl‐, methyl‐ and tosylnitrenes with ethylene is studied computationally at the B3LYP/6‐311++G(d,p) level of theory in both gas phase and in solution. Singlet sulfonylnitrenes react with ethylene via [1 + 2]‐cycloaddition exothermically to give N‐sulfonylaziridines. Triplet sulfonylnitrenes are formed from the singlet ones by the intersystem crossing with the energy barrier not exceeding 2.5 kcal/mol and react in a stepwise fashion by C‐addition or H‐abstraction. The C‐addition gives rise to the formation of N‐sulfonylaziridines or N‐ethylidenesulfonamides depending on the S―N―C_sp3―C_sp2 dihedral angle, with the barrier to rotation about the N―C_sp3 bond not exceeding 2.5 kcal/mol. The H‐abstraction results in N‐vinylsulfonamides. Transformation of N‐sulfonylaziridines to N‐ethylidenesulfonamides requires to overcome the barrier of 57–60 kcal/mol, N‐ethylidenesulfonamides to 4,5‐dihydro‐1,2,3‐oxathiazole 2‐oxides—74–80 kcal/mol and N‐vinylsulfonamides to N‐ethylidenesulfonamides—about 64 kcal/mol. The use of the polarizable continuum model does not lead to a change of the course of the reaction of trifluoromethanesulfonylnitrene with ethylene and only slightly affects the relative energies of the products, intermediates and transition states. Copyright © 2014 John Wiley & Sons, Ltd.     

Reactions C<Subscript>2</Subscript>H<Subscript>2</Subscript> + OH and C<Subscript>2</Subscript> + H<Subscript>2</Subscript>O: Ab initio study of the potential energy surfaces

The stationary points of the potential energy surfaces for the reactions C₂H₂ + OH and C₂ + H₂O are calculated using density functional theory and the coupled cluster method. The relative energies and geometric parameters of the stable intermediates and transition states are in good agreement with the results of independent studies. In most cases, the relative energies differ from the earlier published values by no more than 3 kcal/mol, whereas the rotational constants, by 1–2%. The mechanism of the reaction CCOH₂ → C₂ + H₂O is studied in detail. The possible sources of errors in the calculation methods are examined.     

Nickel coated on beech wood by electroless nickel coating: effects of complexing agent concentrations on nickel film properties

In order to obtain beech wood substrates with new functions as conductive materials and to develop their utilities in industrial fields, the technique of electroless nickel coating on the beech wood substrate was employed. The influence of complexing agent concentration [Na₂EDTA·2H₂O] on the nickel surface resistivity was studied. The process conditions were Ni(CH₃COO)₂·4H₂O 0.103?mol/L, CH₃CHOCOOH 18.18?mL/L, N₂H₅OH 54.54?mL/L, NaOH 0.193?mol/L, pH value of 9.5, temperature of 75?°C, and the complexing agent concentration varied between 0.012 and 0.061?mol/L. By means of XRD, EDXRF, and SEM, the chemical composition and morphology of the prepared films were investigated. The results showed that when the complexing agent concentration increased from 0.012 to 0.061?mol/L in the electroless nickel coating baths, the gained nickel mass on the beech wood substrate decreased from 17.04 to 9.03?mg/cm², the nickel crystallite sizes reduced from 16.1 to 1.41?nm and the electric measurements demonstrated that the nickel surface resistivity rose from 0.004 to 192.16?kΩ/cm².     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

Si衬底上异质外延金刚石的初始阶段原子H的作用及其界面结构

用高分辨率电子能量损失谱方法研究了原子H与被C₂H₂吸附的Si(100)界面的相互作用.结果显示,在Si(100)界面上,Si—Si二聚化键和C₂H₂中的C—C键被H原子打开,它们分别形成Si—H,C—H键.用AM1量子化学方法,计算了C₂H₂和C₂H₄在Si(100)上的吸附结构,指出了C₂H_{2关键词：}