A novel approach to increase emission wavelength of InAs/GaAs quantum dots by using a quaternary capping layer

In this paper, we present a new approach to obtain large size dots in an MBE grown InAs/GaAs multilayer quantum dot system. This is achieved by adding an InAlGaAs quaternary capping layer in addition to a high growth temperature (590°C) GaAs capping layer with the view to tune the emission wavelength of these QDs towards the 1.3 μm/0.95 eV region important for communication devices. Strain driven migration of In atoms from InAlGaAs alloy to the InAs QDs effectively increases the size of QDs. Microscopic investigations were carried out to study the dot size and morphology in the different layers of the grown samples. Methods to reduce structural defects like threading dislocations in multilayer quantum dot samples are also studied.     

Molecular beam epitaxy growth and characterization of self-assembled InAs quantum dots on (1 0 0) InAlAs/InP substrates

Self-assembled InAs quantum dots (QDs) on In_0.52Al_0.48As layer lattice matched to (1 0 0) InP substrates have been grown by molecular beam epitaxy (MBE) and evaluated by transmission electron microscopy (TEM) and photoluminescence (PL). TEM observations indicate that defect-free InAs QDs can be grown to obtain emissions over the technologically important 1.3–1.55 μm region. The PL peak positions for the QDs shift to low energy as the InAs coverage increases, corresponding to increase in QD size. The room temperature PL peak at 1.58 μm was observed from defect-free InAs QDs with average dot height of 3.6 nm.     

Controlling the self-organization of InAs quantum dots upon growth by means of vapor-phase epitaxy on an antimony δ-doped GaAs buffer layer

This work examines the possibility of controlling the parameters of InAs/GaAs quantum dot arrays obtained by metal-organic chemical vapor deposition (MOCVD) at atmospheric pressure with using antimony as a surfactant. The possibility of controlling the parameters and optical properties of InAs quantum dot arrays by varying the surface concentration of Sb atoms in a GaAs buffer layer surface is demonstrated. A model of quantum dot array formation in the presence of Sb atoms is proposed.     

Growth conditions effects on optical properties of InAs quantum dots grown by molecular beam epitaxy on GaAs (1 1 3)A substrate

We have investigated the optical properties of InAs/GaAs (1 1 3)A quantum dots grown by molecular beam epitaxy (MBE) with different growth rates by photoluminescence spectroscopy (PL) as a function of the excitation density and the sample temperature (10–300 K). Reflection high-energy electron diffraction (RHEED) is used to investigate the formation process of InAs quantum dots (QDs). A redshift of the InAs QDs PL band emission was observed when the growth rate was increased. This result was explained by the increase of the InAs quantum dot size with increasing growth rate. A significant redshift was observed when the arsenic flux was decreased. The evolution of the PL peak energy with increasing temperature has showed an S-shaped form due to the localization effects and is attributed to the efficient relaxation process of carriers in different InAs quantum dots and to the exciton transfer localized at the wetting layer.     

MBE自组织生长多层竖直自对准InAs量子点结构的研究

利用MBE方法在(001)GaAs衬底上生长了多层竖直自对准InAs量子点结构。透射电子显微镜的观察表明,多层量子点成一系列柱状分布。同单层量子点相比,多层量子点的光荧光谱线发生红移。这表明由于量子点中载流子波函数的扩展和交迭,柱中量子点之间有耦合现象发生。光荧光谱线半高宽随温度的反常变化说明载流子还会在邻近柱中隧穿.     

Electronic and optical properties of InAs/InP self-assembled quantum dots on patterned substrates

We present atomistic theory of electronic and optical properties of a single InAs quantum dot grown on a pyramidal InP nanotemplate. The shape and size of the dot is assumed to follow the nanotemplate shape and size. The electron and valence hole single particle states are calculated using atomistic effective–bond–orbital model with second nearest-neighbor interactions. The electronic calculations are coupled to separately calculated strain distribution via Bir–Pikus Hamiltonian. The optical properties of InAs dots embedded in InP pyramids are calculated by solving the many-exciton Hamiltonian for interacting electron and hole complexes using the configuration–interaction method. The effect of quantum-dot geometry on the optical spectra is investigated by a comparison between dots of different shapes.     

Growth of InGaAs-capped InAs quantum dots characterized by Atomic Force Microscope and Scanning Electron Microscope

Atomic force microscopy (AFM) is typically used to measure the quantum dot shape and density formed by lattice mismatched epitaxial growth such as InAs on GaAs. However, AFM images are distorted when two dots are situated in juxtaposition with a distance less than the AFM tip width. Scanning electron Microscope (SEM) is much better in distinguishing the dot density but not the dot height. Through these measurements of the growth of In_xGa_1-xAs cap layer on InAs quantum dots, it was observed that the InGaAs layer neither covered the InAs quantum dots and wetting layer uniformly nor 100% phase separates into InAs and GaAs grown on InAs quantum dots and wetting layer, respectively.     

Electrical transport in superlattices containing InAs quantum dots in GaAs and InP

Selectively-doped heterostructures based on both GaAs and InP containing several atomic layers coverage of InAs as both strained 2D and partially relaxed 3D (quantum dot) have been grown by gas source molecular beam epitaxy and the transport properties have been investigated. We show that while coherently strained InAs in 2D layers results in increased electron mobilities, the formation of 3D quantum dots appear to trap electrons and decrease significantly the mobility of those remaining. The degree of trapping is dependent on the size and density of the dots.     

沉积速率和生长停顿对InAs/GaAs量子点超晶格生长影响的综合分析

采用动力学蒙特卡罗模型模拟了沉积速率和生长停顿对GaAs衬底中垂直耦合InAs 量子点超晶格生长早期阶段的影响.通过对生长表面形态、岛平均尺寸、岛尺寸分布及其标准差等方面的研究,发现综合控制沉积速率和生长停顿时间能够得到大小均匀、排列有序的岛阵列.这对后续量子点超晶格生长过程中量子点的定位有重要影响. 关键词： 动力学蒙特卡罗模拟 量子点超晶格 外延生长     

Optical transitions of InAs/In0.36Ga0.64As/GaAs(311B) surface quantum dots clearly identified by the piezoreflectance technique

The bilayer InAs/In_0.36Ga_0.64As/GaAs(311B) quantum dots (QDs), including one InAs buried quantum dot (BQD) layer and the other InAs surface quantum dot (SQD) layer, have been grown by molecular beam epitaxy (MBE). The optical properties of these three samples have been studied by the piezoreflectance (PzR) spectroscopy. The PzR spectra do not exhibit only the optical transitions originated from the InAs BQDs, but the features originated from the InAs SQDs. After the InAs SQDs have been removed chemically, those optical transitions from InAs SQDs have been demonstrated clearly by investigating the PzR spectra of the residual InAs BQDs in these samples. The great redshift of these interband transitions of InAs SQDs has been well discussed. Due to the suitable InAs SQD sizes and the thickness of In_0.36Ga_0.64As layer, the interband transition of InAs SQDs has been shifted to ∼1.55 μm at 77 K.     

Comparison of single-layer and bilayer InAs/GaAs quantum dots with a higher InAs coverage

Epitaxially grown self-assembled InAs quantum dots (QDs) have found applications in optoelectronics. Efforts are being made to obtain efficient quantum-dot lasers operating at longer telecommunication wavelengths, specifically 1.3 μm and 1.55 μm. This requires narrow emission linewidth from the quantum dots at these wavelengths. In InAs/GaAs single layer quantum dot (SQD) structure, higher InAs monolayer coverage for the QDs gives rise to larger dots emitting at longer wavelengths but results in inhomogeneous dot-size distribution. The bilayer quantum dot (BQD) can be used as an alternative to SQDs, which can emit at longer wavelengths (1.229 μm at 8 K) with significantly narrow linewidth (∼16.7 meV). Here, we compare the properties of single layer and bilayer quantum dots grown with higher InAs monolayer coverage. In the BQD structure, only the top QD layer is covered with increased (3.2 ML) InAs monolayer coverage. The emission line width of our BQD sample is found to be insensitive towards post growth treatments.     

Investigation of the effect of varying growth pauses on the structural and optical properties of InAs/GaAs quantum dot heterostructures

Effect of growth pause or ripening time on structural and optical properties of self-assembled InAs/GaAs quantum dot (QD) heterostructures grown by solid state molecular beam epitaxy (MBE ) technique with two different growth rates of InAs (0.032 MLs⁻¹ and 0.197 MLs⁻¹) has been investigated. The QD heterostructures were grown at 520 ^°C with InAs monolayer coverage of 2.7 ML. The results were explained on the basis of high angle annular dark field scanning transmission electron microscope (HAADF-STEM), scanning electron microscope (SEM) and photoluminescence (PL) measurements. Introduction of growth pause leads the QD system towards a thermodynamic equilibrium state which in turn makes interesting changes on the morphology of the samples. Coagulation of some smaller dots occurs because of ripening to produce evolved QDs and the dot density reduces with growth pause.     

Controlling emission wavelength from InAs self-assembled quantum dots on InP (0 0 1) during MOCVD

We studied the growth of InAs quantum dots on InP (0 0 1) substrates in a low-pressure metalorganic chemical vapor deposition by using a so-called InP ‘double-cap’ procedure. With double-capping, a photoluminescence spectrum is modified into a series of multiple peaks, where the emission peaks arise from several quantum dot families with different heights changing in a step of integer number of an InAs monolayer. Cross-sectional transmission electron micrograph observations revealed that the shape of double-capped dots is dramatically changed into a thin plate-like shape with extremely flat upper and lower interfaces, being consistent with our interpretation of the photoluminescence spectrum. We showed that the procedure was extremely useful for controlling the emission wavelength from quantum dots in an InAs/InP (0 0 1) system.     

Controlled positioning of self-assembled InAs quantum dots on (1 1 0) GaAs

We report on a new approach for positioning of self-assembled InAs quantum dots on (1 1 0) GaAs with nanometer precision. By combining self-assembly of quantum dots with molecular beam epitaxy on in situ cleaved surfaces (cleaved-edge overgrowth) we have successfully fabricated arrays of long-range ordered InAs quantum dots. Both atomic force microscopy and micro-photoluminescence measurements demonstrate the ability to control position and ordering of the quantum dots with epitaxial precision as well as size and size homogeneity. Furthermore, photoluminescence investigations on dot ensembles and on single dots confirm the high homogeneity and the excellent optical quality of the quantum dots fabricated.     

Control of structural and excitonic properties of self-organized InAs/GaAs quantum dots

A systematic dependence of excitonic properties on the size of self-organized InAs/GaAs quantum dots is presented. The bright exciton fine-structure splitting changes from negative values to more than 0.5 meV, and the biexciton binding energy varies from antibinding to binding, as the height of truncated pyramidal dots increases from 2 to above 9 InAs monolayers. A novel mode of metalorganic vapor phase epitaxy was developed for growing such quantum dots with precise shape control. The dots consist of pure InAs and feature heights varying in steps of complete InAs monolayers. Such dot ensembles evolve from a strained, rough two-dimensional layer with a thickness close to the critical value for the onset of the 2D–3D transition. Dots with a common height represent subensembles with small inhomogeneous broadening. Tuning of subensemble emission energy is achieved by varying the mean lateral extension of the respective QDs. Detailed knowledge of the structural properties of individual dots enable realistic k·p calculations to analyze the origin of the observed excitonic properties. The binding energies of charged and neutral excitons increase due to correlation by the gradually increasing number of bound states for increasing dot size. The monotonously increasing magnitude of the fine-structure splitting with dot size is shown to be caused by piezoelectricity. The identification of key parameters allows to tailor exciton properties, providing a major step towards the development of novel applications.     

Optical spectroscopy of single InAs/InP quantum dots around λ=1.55 μm

We discuss the preparation and spectroscopic characterisation of a single InAs/InP quantum dot suitable for long-distance quantum key distribution applications around λ=1.55 μm. The dot is prepared using a site-selective growth technique which allows a single dot to be deposited in isolation at a controlled spatial location. Micro-photoluminescence measurements as a function of exciton occupation are used to determine the electronic structure of the dot. Biexciton emission, shell filling and many-body re-normalization effects are observed for the first time in single InAs/InP quantum dots.     

Studying the mechanism of ordered growth of InAs quantum dots on GaAs/InP

We study the mechanism of ordered growth of InAs quantum dots (islands) on a GaAs/InP substrate in theory and point out that the tensile strain can be used to control InAs/InP self-assembled quantum dots arrangement. Photoluminescence spectrum, and atomic force microscopy images have been investigated. In the experiment, ordered InAs islands have been obtained and the maximum density of quantum dots is 1.6×10¹⁰ cm⁻² at 4 monolayers InAs layer.     

Luminescence tuning of InAs/GaAs quantum dots grown on high-index planes

In this work we report the effects of the growth interruption on the optical and microscopic properties of InAs/GaAs self-assembled quantum dots grown by molecular beam epitaxy on (100) and (311)B oriented GaAs substrates. The growth interruption applied after the deposition of the InAs layer strongly affects the optical and microscopic properties of the dots, thus providing evidence of strong nonequilibrium effects on dot self-assembly. These effects are enhanced for dots grown on high-index planes and can be used to tune the emission energy and to improve the luminescence intensity of the dots.     

红光InAlAs量子点的结构和光学性质

利用ＭＢＥ方法在（００１）衬底上成功地生长密度大、尺寸小、发红光的ＩｎＡｌＡｓ／ＡｌＧａＡｓ量子点结构。通过原子力显微镜观察表明,ＩｎＡｌＡｓ量子的密度和大小都随覆盖厚度的增加而增大;发现Ａｌ原子的表面迁移率决定ＩｎＡｌＡｓ量子点的形貌,光荧光谱证实了量子点的发光峰值在红光范围,并结合形貌的统计得到了量子点的发光峰展宽主要昌受量子点的横向尺寸影响。     

带有InGaAs覆盖层的InAs量子点红外探测器材料的发光与光电响应

利用分子束外延技术(MBE),在GaAs(001)衬底上自组织生长了不同结构的InAs量子点样品,并制备了量子点红外探测器件。利用原子力显微镜(AFM)和光致发光(PL)光谱研究了量子点的表面结构、形貌和光学性质。渐变InGaAs层的插入有效地释放了InAs量子点所受的应力,抑制了量子点中In组分的偏析,提高了外延层的生长质量,降低了势垒高度,使InAs量子点荧光波长红移。伏安特性曲线和光电流(PC)谱结果表明,生长条件的优化提高了器件的红外响应,具有组分渐变的InGaAs层的探测器响应波长发生明显红移。