A Kinetic Aspect of the Thermal Dehydration of Dilithium Tetraborate Trihydrate

The reaction process of the thermal dehydration of dilithium tetraborate trihydrate, Li₂B₄O₇3H₂O, was reinvestigated from a viewpoint of reaction kinetics. On the basis of the results of thermogravimetry, constant rate thermal analysis, powder X-ray diffractometry, infrared spectroscopy and scanning electron microscopy, it was confirmed that the reaction proceeds via three consecutive kinetic steps characterized by different activation energies. The first and second kinetic steps, accompanied by the destruction of the original crystal structure of the reactant, seem to be assigned to the surface and internal reactions, respectively. During the third kinetic step, the thermal dehydration of hydrated amorphous intermediate, produced at the second kinetic step, and crystallization of the final dehydration product, Li₂B₄O₇, are likely to take place concurrently.This revised version was published online in November 2005 with corrections to the Cover Date.     

Spectroscopic characterization of superparamagnetic particles of thermolytic products of ferric sulphate hydrates

Superparamagnetic particles of chemically pure samples, in the system Fe(OH)SO₄/Fe(OH)SO₄·(H₂O), are produced by thermal decomposition of ferric sulphate hydrates. The control of particle size distribution is achieved by successive hydration and dehydration processes monitored by X-ray diffraction, electron microscopy, Mössbauer and IR spectroscopy. The particle size modification is related for the particle growth and two mechanisms are suggested thereon.     

Kinetics of the amorphous—anatase phase transformation in copper doped titanium oxide

Samples of TiO₂ doped with 2 and 5 mol% of Cu²⁺ were prepared by the sol-gel process. Titanium(IV) isopropoxide and copper(II) nitrate were used as precursors. The samples were prepared as monolithic shapes, dried at 80°C for 72 h and heat treated at various temperatures in the range 200–900°C for 2 h. The structural transformation and texture of the samples were investigated by X-ray powder diffraction (XRD) and nitrogen adsorption. Significant changes were observed during the crystallization process; on the one hand, the crystallization profiles show that crystallization occurs uniformly and is practically insensitive to the dopant concentration, but when the transformation at a given temperature is followed as a function of time, the rate of the amorphous-anatase transformation is larger for the sample containing 2 mol% Cu²⁺. Electron spin resonance (ESR) results show that in this sample there is no segregation of Cu²⁺ ions. The sample containing 2 mol% of Cu²⁺ was selected for the kinetic studies and the temperatures selected were 300, 325, 350, 375 and 400°C, which were taken from the amorphous to anatase crystallization profile. An activation energy of 137 ± 4 kJ/mol for the crystallization process was estimated from the kinetic data. These results showed that the effect of the open structure present in the TiO₂ amorphous phase provides the atomic mobility required for the crystallization. On the other hand, the differences in the crystallization rate due to the amount of Cu²⁺ were explained by the segregation of copper ions to the surface of the samples.     

On Structural Features Necessary for Near‐IR‐Light Photocatalysts

In the search for photocatalysts that can directly utilize near‐IR (NIR) light, we investigated three oxides Cu₃(OH)₄SO₄ (antlerite), Cu₄(OH)₆SO₄, and Cu₂(OH)₃Cl by photodecomposing 2,4‐dichlorophenol over them under NIR irradiation and by comparing their electronic structures with that of the known NIR photocatalyst Cu₂(OH)PO₄. Both Cu₃(OH)₄SO₄ and Cu₄(OH)₆SO₄ are NIR photocatalysts, but Cu₂(OH)₃Cl is not. Thus, in addition to the presence of two different CuO_m and Cu′O_n polyhedra linked with Cu?O?Cu′ bridges, the presence of acceptor groups (e.g., SO₄, PO₄) linked to the metal oxygen polyhedra is necessary for NIR photocatalysts.     

Thermal behaviors of amorphous calcium carbonates prepared in aqueous and ethanol media

Two different samples of amorphous calcium carbonate (ACC) hydrates were prepared respectively by mixing aqueous solutions of CaCl₂ and Na₂CO₃-NaOH and by allowing the diffusion of (NH₄)₂CO₃ sublimate into ethanol solution of CaCl₂. Thermal behaviors of the synthetic ACCs were investigated comparatively by means of thermoanalytical techniques complimented by powder X-ray diffraction, FTIR spectrometry and microscopic observations. The anhydrous ACCs produced by the thermal dehydration of the respective samples were crystallized to calcite in different ways. The sample prepared in aqueous medium was crystallized at around 600 K in a single step. Crystallization in two separated steps at around 600 and 825 K was observed for the sample prepared in ethanol medium. Characteristics of the crystallization processes were discussed from thermodynamic and kinetic points of view.     

Thermoanalytical studies of natural potassium, sodium and ammonium alunites

Dynamic and controlled rate thermal analysis (CRTA) has been used to characterise alunites of formula [M(Al)₃(SO₄)₂(OH)₆] where M⁺ is the cations K⁺, Na⁺ or NH₄ ⁺. Thermal decomposition occurs in a series of steps: (a) dehydration, (b) well-defined dehydroxylation and (c) desulphation. CRTA offers a better resolution and a more detailed interpretation of water formation processes via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of water formation reveal the subtle nature of dehydration and dehydroxylation.     

Effect of mechanical grinding on the reaction pathway and kinetics of the thermal decomposition of hydromagnesite

Effect of mechanical grinding of hydromagnesite on the reaction pathway and kinetic behaviors of the thermal decomposition process was investigated by means of thermoanalytical techniques, together with crystallographic and morphological measurements. A crystalline hydromagnesite, the as-received sample, was decomposed in two distinguished mass loss steps of overlapped dehydration-dehydroxylation and dehydroxylation-decarbonation via an amorphous intermediate of carbonate compound. Thermal decomposition of an amorphous hydromagnesite, obtained by mechanical grinding of the as-received sample, was characterized by three well-separated decomposition processes of dehydration, dehydroxylation and decarbonation. The kinetic behaviors of the respective decomposition steps were estimated separately using a mathematical deconvolution of the partially overlapped reaction steps. From the formal kinetic analyses of the respective reaction processes, it was revealed that the dehydration and dehydroxylation processes indicate the decelerate rate behaviors controlled by diffusion, while the rate behavior of nucleation limited type is predominant for the decarbonation process.     

Influence of Adding SiO2 into ZrO2 on SO2-4/ZrO2 Solid Superacid

用共沉淀法和负载法制备了一系列SO     

Kinetics and mechanism of the dehydration of α-NiSO4·6H2O

A study of the thermal dehydration of α-NiSO₄·6H₂O has been performed by power compensation differential scanning calorimetry in flowing nitrogen. No significant differences in behaviour were observed using either uncrushed crystalline powders or single crystal slabs cleaved parallel to {001}. In good agreement with previous findings, the kinetic analysis of the thermal curves confirms the validity of an=2 Avrami-Erofeev equation (AE2) in isothermal experiments at low (338–343 K) temperatures or in the initial portions of variable temperature runs. The kinetic obedience is however of an ‘order of reaction’ type for the main portion of the variable temperature runs and, for isothermal experiments, in the upper part of the temperature range investigated. Values of activation energies and frequency factors are reported. Parallel studies by optical microscopy showed relevant changes of surface texture when partially (thermally or vacuum) dehydrated {001} cleaved surface were submitted to rehydration. This phenomenon (named orange peel formation) indicates that a dehydrated layer forms on the crystal surfaces preceding the appearance of product crystals (germination or nucleation). Microscopy also revealed that reaction goes on inside the crystal and that product formation takes place in the bulk phase, following lattice collapse in experiments at high heating rates. Combined with previous results, these new experimental findings allow us to formulate a mechanism for the present transformation, comprising three main rate processes:

1. the reaction (detachment of water molecules from their lattice positions in the reactant);
2. the migration of the water molecules freed by the reaction through the initially formed, water-depleted layer enveloping the reactant crystal;
3. the crystallization of such a layer to form the product.

     

Infrarotspektroskopische und thermoanalytische Untersuchung von Trikobalt(II)-dihydroxidsulfat-dihydrat,Co3(OH)2(SO4)2 · 2H2O

The infrared spectra between 600 and 4000 cm^?1 of Co₃(OH)₂(SO₄)₂ · 2H₂O, Co₃(OH)₂(SO₄)₂, and Co₃(OD)₂(SO₄)₂ · 2D₂O are reported and discussed. The spectra are mainly examined in relation to the binding state of the water molecules. The results are in good agreement with the previously described crystal structure studies. Thermogravimetry, differential thermal analysis and X-ray diffraction methods were used to investigate the unusual thermal decomposition behaviour of Co₃(OH)₂(SO₄)₂ · 2H₂O. The kinetics of the dehydration reaction are discussed.     

Kinetic study of the multistep thermal behaviour of barium titanyl oxalate prepared via chemical precipitation method

This study describes the physico-geometrical mechanism and overall kinetics for the multistep thermal dehydration of barium titanyl oxalate tetrahydrate (BTO). The thermal dehydration kinetics of BTO was studied at four different linear heating rates under non-isothermal conditions. The reaction kinetics was performed using differential scanning calorimetry (DSC) and the curves obtained were analysed using different isoconversional model-free equations and the values are found to be compatible with each other. The kinetic deconvolution principle is used for identifying the partially overlapped kinetic processes of the thermal dehydration of BTO, and it occurs in two stages. The overall reaction kinetics parameters calculated via kinetic deconvolution of the sample indicate the multistep nature of the process and the kinetic analysis of the non-isothermal data of this reaction model shows that the reaction is best described by Sestak–Berggren (m, n) empirical kinetic model. The prepared sample was identified and characterized by means of FT-IR, XRD, SEM, and TEM.

     

Thermal behavior of double salt schoenite

The thermal behavior of synthetic schoenite (K₂SO₄·MgSO₄·6H₂)) during heating has been studied by thermal methods. The temperatures of dehydration and decomposition of schoenite have also been determined by DTA, TG and DSC. The thermal reaction equations and the X-ray power diffraction results of the products have been given and the corresponding kinetic parameters have also been obtained.     

Deshydratation de l'alun d'ammonium

The formation of the two kinds of partially dehydrated amorphous alum can be explained by the water vapour gradient which appears within the sample during dehydration and by existence of a critical water pressureP _c at the reaction interface. The mechanisms of dehydration at “low” and “high” pressure are described.     

Synthesis of a Sulfate Enclathrated Zeolite with Intermediate Framework Structure between Sodalite and Cancrinite

A sulfate enclathrated microporous zeolite of composition Na_7.4[SiAlO₄]₆(SO₄)_0.7(H₂O)_4.8 with intermediate framework structure (INT) between the well known zeolites sodalite (SOD) and cancrinite (CAN) can be prepared by the autothermal synthesis, a method first demonstrated in reference 1 . The product (abbreviated as “SO₄‐INT”) was characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray analysis (EDX‐analysis), Fourier transform infrared spectroscopy (FT‐IR) and thermogravimetry (TG). SO₄‐INT was found to crystallize as spheres with 1–6 μm in diameter with a rough surface. Sometimes the spheres are agglutinated to each other by a few amount of amorphous material within the sample. The thermal behavior of the new phase was further studied. At elevated temperature (1000 °C) a transformation of SO₄‐INT into a large amount of nosean was observed beside some parts of nepheline, formed by crystallization of the amorphous byproduct. The nosean phase was found to be stable up to 1250 °C, before the onset of a total destruction by melting during further heating. Finally a re‐crystallization of the melt during cooling yielded carnegieite as the final product (low form at room temperature). This unusual thermal behavior of SO₄‐INT is discussed in terms of structural interactions of the sulfate guests inside the aluminosilicate host‐framework and in comparison with literature data of the intermediate phases CO₃‐INT 2 , 3 as well as NO₃‐INT. 4     

Darstellung und Eigenschaften von Heteropolykationenverbindungen. I. Über das Dodekaaluminogermaniumsulfat [GeO4Al12(OH)24(H2O)12](SO4)4 · xH2O

Preparation and Properties of Compounds with Heteropolycations. I. Dodecaaluminogermaniumsulfate [GeO₄Al₁₂(OH)₂₄(H₂O)₁₂](SO₄)₄ · xH₂O By reaction of aqueous solutions of aluminum chloride and sodium germanate and subsequent precipitation as sulfate a cristalline product is obtained, which is the title compound according to chemical analysis and ²⁷Al-NMR in analogy to the wellknown tridecameric basic aluminum cation. From thermal analysis and kinetic measurements is concluded that the title compound has a higher stability than the tridecameric basic aluminum cation.     

Structural and electronic properties of γ-Tl2Cu(SO4)2

The compound Tl₂Cu(SO₄)₂, belonging to the dehydrated copper Tutton salts [Cat₂Cu(SO₄)₂, where Cat stands for cation], and especially its glassy γ-modification was investigated. The results of X-ray diffraction analysis, electron paramagnetic resonance, differential thermal analysis, electrical conductivity, and thermostimulated depolarization measurements are presented and discussed. An evident correlation among the results of various experimental techniques was found.     

Kinetics of thermal dehydration of Ce2(SO4)2, n(H,D)2O (n=5, 8, 9)

The thermal dehydration of Ce₂(SO₄)₃·5H₂O, Ce₂(SO₄)₃·8H₂O, Ce₂(SO₄)₃·9H₂O and their isomorphous deuterated compounds was studied by means of thermogravimetric measurements. A kinetic analysis of the TG curves obtained was carried out by computer. The thermal stability, Arrhenius parameters and mechanism of dehydration were investigated.     

Determination of maximum loading capacity of polyamidoamine (PAMAM) dendrimers and evaluation of Cu55 dendrimer‐encapsulated nanoparticles for catalytic activity

Spectrophotometric titrations provide information about the interior of the polyamidoamine (PAMAM) dendrimers, and therefore how nanoparticles are encapsulated. In this work, binding studies were performed to determine maximum loading capacities (N) of hydroxyl terminated G4, G5, and G6 PAMAM dendrimers with Cu²⁺ ions. The values of N found via spectrophotometric titrations were 16.22, 31.86, and 57.36 for G4‐OH, G5‐OH, and G6‐OH, respectively. The determination of loading capacity was also done using Viva spin filtration, and the results were found to be in agreement with those found via spectrophotometric titrations. From the binding isotherm, the values of equilibrium constant (K′) were determined and found to be 0.0488 (G4‐OH), 0.0291 (G5‐OH), and 0.0158 (G6‐OH). Owing to instability of G4‐OH (Cu₁₆), G5‐OH (Cu₃₂), and G6‐OH (Cu₅₇) dendrimer‐encapsulated nanoparticles (DENs) synthesized, G6‐OH (Cu₅₅) DENs of average size 2.6 ± 0.3 nm were prepared and were found to be relatively stable. Thus G6‐OH (Cu₅₅) catalyst was evaluated for the reduction of 4‐nitrophenol and was found to be catalytically active toward reduction of 4‐nitrophenol. Reaction kinetics of 4NP reduction was thoroughly studied in light of the Langmuir‐Hinshelwood kinetic model, and surface rate k, and the adsorption rates K_4NP, and K_BH4 were determined. The reaction was performed at different temperatures, which further expanded the study into determination of thermodynamic (ΔH^‡, ΔS^‡, ΔG^‡, and E_A) parameters.     

Crystallization kinetics of Ti20Zr20Cu60 metallic glass by isoconversional methods using modulated differential scanning calorimetry

The study of crystallization kinetics of amorphous alloys has been a matter of great interest for material researchers for past few decades, since it provides information about the kinetic parameters i.e., activation energy of crystallization and the frequency factor. These kinetic parameters can be calculated by model-free isoconversional methods. Isoconversional methods allow calculating the activation energy as a function of degree of conversion, α. Hence, these methods provide accurate results for multistep processes like crystallization. Model-free methods are categorized as linear and non-linear isoconversional methods. Linear methods are further classified as linear differential and linear integral isoconversional methods. In present work, we have used these isoconversional methods to study the effect of non-linear heating rate, employed by modulated differential scanning calorimetry (MDSC), on the non-isothermal crystallization kinetics of Ti₂₀Zr₂₀Cu₆₀ metallic glass. For Ti₂₀Zr₂₀Cu₆₀, MDSC curves clearly indicate a two-step crystallization process. Both crystallization peaks were studied based on the modified expressions for isoconversional methods by non-linear heating rate. The term corresponding to non-linearity comes out to be (A _T ω/2β)². The effect of non-linear heating rate on measurement of kinetic parameters by isoconversional methods is studied. The activation energy of crystallization is calculated for Ti₂₀Zr₂₀Cu₆₀ metallic glass for various degrees of conversion by linear integral isoconversional methods i.e., Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose, and also with Friedman method which is a linear differential isoconversional method.     

A comparative study of the effects of decomposition rate control and mechanical grinding on the thermal decomposition of aluminum hydroxide

Summary Two different processes of the thermal decomposition of synthetic bayerite, i.e., the non-isothermal decomposition of mechanically ground sample in flowing N₂ and the controlled rate thermal decomposition of crystalline bayerite under vacuum, were investigated comparatively. In comparison with the conventional non-isothermal decomposition of crystalline bayerite in flowing N₂, the reaction temperature of the thermal decomposition was lowered by the individual effects of mechanical grinding of the sample and the reaction rate control. These decomposition processes indicated similar behavior characterized by the restricted changes of the specific surface area during the course of decomposition reaction and the formation of an amorphous alumina as the decomposition product. Different thermal behaviors were observed for those amorphous Al₂O₃ produced by the respective decomposition processes.