含氟硅油合成研究及其应用

综述了具有不同含氟取代基的氟硅单体合成方法，以及由这些单体制备氟硅油的研究成果。介绍了氟硅油不同的分子结构与其丰富多彩的性能之间的关系。     

多烷基苯磺酸钠水溶液的表面性质

研究了多烷基苯磺酸钠的结构, 特别是侧链碳原子数的增加, 对其表面活性的影响, 并与其它烷基苯磺酸钠进行了比较. 结果表明, 随着苯环上侧链碳原子数的增加, 多烷基苯磺酸钠的临界胶束浓度(cmc)降低, 但侧链上CH2降低cmc的程度远小于主链上CH2的作用. 当侧链碳原子数增加时, 多烷基苯磺酸钠的饱和吸附量(Γmax)降低, 表现出与主链不同的变化规律. 从多烷基苯磺酸钠的结构解释了cmc和Γmax的变化规律.     

聚丁二烯丙烯酸酯液态光学透明胶的合成及其UV固化膜的性能

针对丙烯酸酯大单体在合成过程中常带有颜色,以及由其制备的液态光学透明胶的UV固化膜易黄变的问题,本文报道了一条新的大单体合成路线:首先以端羟基聚丁二烯(HTPB)、萘钾、丙烯酰氯(AC)为原料,通过一锅法合成了一种无色透明的聚丁二烯丙烯酸酯大单体(PBAM);然后将PBAM与丙烯酸酯活性稀释单体、光引发剂混合,制备了液态光学透明胶;最后通过UV固化制备了一系列无色透明的薄膜。利用GPC、1H-NMR、FTIR等手段对PBAM进行了表征;进一步研究了液态光学透明胶UV固化膜的光学性能、耐黄变性能、耐低温性能等。结果表明:基于新路线合成的PBAM呈现无色透明,液态光学透明胶的UV固化膜展现出优良的光学性能和耐黄变性能,固化膜透光率高达98%;经紫外线加速老化264h后,色差(ΔE)≤1.5;此外,该固化膜还具有优良的耐低温性能,玻璃化转变温度为-30℃。     

Hydroxyl-terminated Polyethylenes Bearing Functional Side Groups: Facile Synthesis and Their Properties

A series of hydroxyl-terminated polyethylenes(HTPE) bearing various functional side groups(e.g. carboxyl, ester and butane groups)were synthesized by the combination of ring-opening metathesis polymerization(ROMP) and visible light photocatalytic thiol-ene reaction. The products are named as α,ω-dihydroxyl-poly[(propionyloxythio)methinetrimethylene](HTPE~(carboxyl)), α,ω-dihydroxyl-poly[(methylpropionatethio)methinetrimethylene](HTPE~(ester)) and α,ω-dihydroxyl-poly[(butylthio) methinetrimethylene](HTPE~(butane)), respectively. The investigation of ROMP indicated that the molecular weight of resultant hydroxyl-terminated polybutadiene(HTPB) can be tailored by varying the feed ratios of monomer to chain transfer agent(CTA). The exploration of the photocatalytic thiol-ene reaction between HTPB precursor and methyl 3-mercaptopropionate revealed that blue light as well as oxygen accelerated the reaction. 1 H-NMR and ~(13) C-NMR results verified all the double bonds in HTPB can be modified, and the main chain of resultant polymer can be considered as polyethylene. Subsequently, relationship between the structure of side groups and the thermal properties of functional PEs was studied. And the results suggested that the T_g was in the order of HTPE~(butane)HTPE~(ester)HTPE~(carboxyl). Greater interaction between side groups resulted in higher T_g. Moreover, all the functional PE samples exhibited poor thermostability as compared to HTPB. Finally, the promising applications for functional PEs were explored. HTPE~(carboxyl) can be utilized as a smart material with p H-responsive properties due to its p H-dependent ionization of carboxyl side groups. HTPE~(butane) can be employed as a macro-initiator for building the triblock copolymer due to the presence of active hydroxyl end groups. HTPE~(ester) can serve as a plasticizer for PVC which can enhance the ductility of PVC without obviously sacrificing strength.     

不同结构芳香侧链酰基牛磺酸钠的表面扩张性质

利用悬挂滴方法研究了N-(α-苯氧基)十四酸牛磺酸钠(12+B-T)和N-(α-对乙基苯氧基)十四酸牛磺酸钠(12+2B-T)在空气/水表面上的动态扩张粘弹性质, 考察了时间、扩张频率及摩尔浓度对扩张模量和相角的影响, 测定了不同摩尔浓度条件下的泡沫性能. 研究发现: 低浓度条件下, 表面分子间相互作用决定表面活性剂吸附膜的性质, 膜以弹性为主; 高浓度条件下, 扩散交换过程起主导作用, 吸附膜表现出粘弹特性. 表面活性剂芳环支链上增加一个乙基, 分子间相互作用增强, 扩张模量增大, 泡沫更加稳定.     

Synthesis and Photovoltaic Properties of Formyl End-Capped Oligothiophenes

For the purpose of developing novel photovoltaic materials, 5,5″-biformyl-2,2′:5′,2″-terthiophene (OHC-3T-CHO) and 5,5″″-biformyl-2,2′:5′,2″:5″,2″′:5″′,2″″-q-uinquethiophene (OHC-5T-CHO) were synthesized. The photovoltaic properties of OHC-3T-CHO and OHC-5T-CHO were studied. We have fabricated two flexible organic photovoltaic devices using OHC-3T-CHO, OHC-5T-CHO, and 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA). The PET-ITO (indium tin oxides coated with polyethylene terephthalate)/OHC-3T-CHO/PTCDA/Al device has an open circuit voltage (V _oc ) of 1.12 V, and photoelectric conversion efficiency (PCE) of 1.00%, whereas the PET-ITO/OHC-5T-CHO/PTCDA/Al device has a V _oc of 1.78 V and PCE of 1.08%. Both devices have high V _oc (1.12 V and 1.78 V). It is possible that intermolecular hydrogen bonding between the –CHO group of OHC-nT-CHO and the carboxylic dianhydride of PTCDA enhanced the efficiency by promoting forward interfacial electron transfer.     

LaDAlY型沸石表面羟基和酸性的研究

应用红外光谱和NH₃-TPD法对LaDAlY型沸石的表面羟基和酸性进行了研究,从将La³⁺离子引入NH₄Y和DAlY后表面羟基的变化中探讨了La³⁺离子在NH₄Y和DAlY中的分布,吡啶吸附及脱附的红外光谱表明,在DAlY中引入La³⁺后B酸和L中心数均减少;NH₃-TPD的结果表明,在DAlY中引入La³⁺离子后,其弱酸中心的强度稍有增加,而强酸中心的强度基本不变,酸中心数一般减少,其结果与吡啶-IR结果一致。     

新型季铵化多羟基Gemini表面活性剂的合成及其表面性能

2-甲氨基乙醇和二乙醇胺分别与十二烷基溴经取代反应制得叔胺(2a和2b);2a,2b及N,N-二甲基十二烷基叔胺分别与1,3-二溴丙烷反应合成了Gemini表面活性剂(3a~3c),其中3a和3b为新化合物,其结构经1H NMR表征。表面活性测试结果表明,3a~3c的CMC分别为0.859 4 mmol·L-1,0.769 1 mmol·L-1和0.962 9 mmol·L-1,呈随羟基数量的增加而降低趋势。     

Polybutadiene model networks —synthesis,mechanical characterization and comparison with rubber elasticity models

Model networks of defined crosslink density are prepared via nonradical statistical crosslinking of polybutadiene in bulk and concentrated solution using a masked bistriazolinedione as crosslinker. The kinetics of crosslinking is monitored by FT-IR-spectroscopy. The reaction follows pseudo-1st-order reaction kinetics. The activation parameter of the crosslinking reaction is estimated from crosslinking at various temperatures. Networks of deuterated polybutadiene are prepared by this reaction in a wide range of crosslink densities. The stress strain behavior is analyzed according to the Junction Constraint-Theory of rubber elasticity (JCT) and to the approach introduced by Graessley accounting for trapped topological constraints. The analysis clearly demonstrates that trapped entanglements contribute to the mechanically effective cycle rank, i.e., to the modulus in this system in the small and large strain limit.     

基于蒽/芘分子封端的芴-芳胺衍生物的可溶液加工的蓝光材料的合成与光电性质

合成了两类分别基于芘和蒽封端的芴-芳胺衍生物（FAn,FPy）的新型可溶液加工蓝色发光分子,两种材料均溶于常规的有机溶剂,并且可以旋涂成膜. 通过紫外-可见光谱和荧光光谱对其在溶液中和固态薄膜下的光学性能进行了表征,发现这两类分子在固态下发射峰分别位于449和465 nm,属于蓝色发光材料. 并通过循环伏安法表征了其电化学性能,计算得出FAn和FPy的最高占据分子轨道（HOMO）能级分别为-5.37 和-5.36eV. 结果表明N-己基二苯胺的引入有效阻止了分子在固态下的平面堆积,抑制了长波发射,并且提高了分子HOMO能级,改善了空穴注入能力. 差示扫描量热法（DSC）和热重分析（TGA）测试表明这两类化合物均显示出良好的热稳定性,其中FAn的玻璃化转变温度和热分解温度分别达到了207和439 ℃. 良好的性能使得这两类材料成为一种潜在的可溶液加工的蓝光材料.     

基于蒽/芘分子封端的芴-芳胺衍生物的可溶液加工的蓝光材料的合成与光电性质

Two novel potential solution-processed blue fluorescent emitters composed of a core fluorenediphenylamine unit capped with either anthracene (FAn) or pyrene (FPy) were synthesized and characterized. They were both soluble in common organic solvents and solutions gave smooth films after spin coating. Their optical properties in solution and in the film were investigated by UV-visible and photoluminescence (PL) spectroscopy. The PL emission maximum of FAn and FPy in the film state were found to be 449 and 465 nm, respectively. The electrochemical properties of the as-prepared samples were studied by cyclic voltammetry. The estimated highest occupied molecular orbital (HOMO) energy levels were -5.37 and -5.36 eV for FAn and FPy, respectively. These results indicate that the introduction of diphenylamine effectively prevents plane stacking of the molecules in the solid state, which suppresses the formation of long-wavelength aggregates, and the high HOMO levels enhance the hole-injection ability of the compounds. The results of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) indicate that the two materials have excellent thermal stability with the glass transition temperature of FAn reaching 207 ℃ and the thermal decomposition temperature as high as 439 ℃. The good performance of the fluorescent emitters makes them promising candidates as solution-processed blue organic light-emitting diodes.     

含羧基的含氟嵌段共聚物的合成及表面性能研究

利用原子转移自由基聚合反应以及随后的大分子链中叔丁酯基团的水解反应,合成了一系列具有不同含氟量和羧基含量的二嵌段共聚物,并分别通过GPC, ¹H NMR和FT-IR对共聚物的组成和结构进行了表征.进一步考察了这些含羧基或羧酸钠基团的含氟嵌段共聚物在吡咯烷酮或水中的溶解性能、临界胶束浓度、表面活性、达到饱和吸附时每个分子在表面所占据的面积,以及成膜后的临界表面张力等性能.实验结果表明,此含氟嵌段共聚物能显著降低吡咯烷酮和水的表面张力,成膜后表现出与聚四氟乙烯极为接近的低表面能特性.     

乙烯等离子体处理的云母表面结构及表面性质

用元素分析、色-质谱、裂解气相色谱和顺磁共振等方法研究了经乙烯等离子体处理的云母表面化学结构及处理过程。结果表明,云母颗粒表面形成了厚数十埃的等离子体聚乙烯膜,其化学结构与反应体系中无云母时得到的等离子体聚乙烯膜相同。通过扫描电镜观察到云母片表面的聚合膜具有规则的海星状花样,随处理时间的延长花样按比例长大。水与云母表面的接触角数据说明,乙烯等离子体处理使云母表面的疏水性提高到聚乙烯的水平,比氩气等离子体、硅烷偶联剂及钛酸酯偶联剂处理的效果均更为显著。     

Synthesis and Properties of Polymers Containing Phosphatidylcholine Analogues in the Main Chains and Long Alkyl Groups in the Side Chains

Abstract

Several new polymers containing hydrophilic phosphatidylcholine analogues in the main chains and hydrophobic docosyl or stearyl groups in the side chains have been synthesized. The polymers exhibit thermotropic liquid crystalline behaviors from 65°C up to ca. 280°C as determined by polarizing microscopy. One of the polymers shows slight crystallinity as evidenced by wide-angle x-ray diffraction. The viscosity measurements show that some of the polymers have properties similar to usual polyelectrolytes. However, one polymer shows a linear increase of reduced viscosity.     

Hydroxy and Di-Hydroxy End-Capped Polybutadiene as Reactive Steric Stabilizers for the Synthesis of Polyurethane Particles in Organic Dispersant Media

Summary: The synthesis of polyurethane particles by polyaddition of ethylene glycol (EG) and tolylene-2,4-diisocyanate (TDI) in cyclohexane at 60 °C was investigated in the presence of ω-hydroxy and ω,ω′-dihydroxy polybutadiene, used as reactive steric stabilizers. The effect of the functionality and concentration of the reactive polybutadiene, as well as the monomer addition procedure, onto the polyurethane particle formation was studied. Calibrated PUR particles with an average diameter in the range 1–2 µm could be readily obtained.     

含偶氮苯生色团的聚醚的合成与热致液晶性质

β－氯乙基缩水甘油醚（ＧＣＥ）和ＧＣＥ／羟丁基乙烯基醚（ＨＢＶＥ）分别通过阳离子聚合、光引发共聚合,获得两种聚醚,然后再分别与４－硝基－４’－羟基偶氦苯（ＮＨＡ）反应,制备了两种侧链含偶氦苯生色团的液晶聚合物（ＰＡＥＧ、ＰＡＶ）。用ＦＴＩＲ、＾１Ｈ－ＮＭＲ和ＥＡ对其化学结构及生色团含量进行了表征,以ＰＯＭ,ＤＳＣ、ＴＧＡ和ＷＡＸＤ对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究。结果表明,     

烯烃易位法降解顺丁橡胶及制备遥爪低聚物的研究

采用烯烃交叉易位反应,在Grubbs二代催化剂和含有功能基团的链转移剂作用下,研究了工业级高分子量顺丁橡胶的降解以及高附加值遥爪型丁二烯低聚物的制备.涉及的链转移剂主要是轴对称的顺丁烯类衍生物:顺-1,4-二氯-2-丁烯(DCB)、顺-1,4-二乙酰氧基-2-丁烯(DAB)、马来酸二甲酯(DMM)、马来酸二乙酯(DEM).产物的分子量(Mn)和分子量分布指数(PDI)通过凝胶渗透色谱仪(GPC)测定,产物的分子链段结构和组分通过红外光谱(FTIR)、核磁共振氢谱(1H-NMR)以及高效液相色谱-质谱联用(LC-MS)表征.实验结果表明,通过引入不同的链转移剂,控制顺丁橡胶/链转移剂、顺丁橡胶/催化剂的摩尔投料比以及反应时间,可以有效控制低聚物的Mn和PDI,其Mn变化范围为230~4800,PDI变化范围为1.09~2.82.进一步研究发现,在一定反应条件引入DAB,可以逐一断裂顺丁橡胶的主链,获得丁二烯重复单元仅为1的小分子新结构.     

Synthesis,Micellar and Surface Properties of Cationic Trisiloxane Surfactants with Different Siloxane Hydrophobic Groups

Three cationic trisiloxane surfactants, 1-methyl-1-[bis(trimethylsiloxy)methyl]silyl-propylpyrrolidinium chloride (Si₃pyCl), 1-methyl-1-[bis(triethylsiloxy)methyl]silyl-propylpyrrolidinium chloride (Et-Si₃pyCl), and 1-methyl-1-[bis(vinyldimethylsiloxy)methyl]silylpropylpyrrolidinium chloride (Vi-Si₃pyCl) were synthesized. The aggregation behavior of the trisiloxane surfactants with different siloxane hydrophobic groups in aqueous solution was investigated by surface tension and electrical conductivity measurements. The structures of hydrophobic groups of the trisiloxane surfactants can obviously influence their surface activities and thermodynamics. All the three cationic trisiloxane surfactants have excellent surface activity. Owing to the steric hindrance of hydrophobic groups, the CMC values increase following the order Et-Si₃PyCl?<?Vi-Si₃PyCl?<?Si₃PyCl. The \(\Delta G_{\text{m}}^{\text{o}}\) values increase in the order Et-Si₃PyCl?>?Vi-Si₃PyCl?>?Si₃PyCl, attributed to the decrease in the hydrophobic effect. The micellization processes of these surfactants are entropy-driven.     

Synthesis and Antimicrobial Properties of the Novel Fluorinated Bis-ammonium Salts with Two Primary Amine Groups

In order to resolve the increasing resistance phenomena of the Gram-negative bacteria against single chain quaternary ammonium salts （QAS）, lysine with a pedant fluorinated bis-ammonium salts was synthesized and its antimicrobial properties were evaluated in this work. The novel fluorinated bis-ammonium salts shows similar activity with conventional single chain quaternary ammonium salts against Gram-positive bacteria but stronger activity against Gram-negative bacteria and yeast compared with the single chained counterpart.     

Synthesis and Antimicrobial Properties of the Novel Fluonnated Bis-ammonium Salts with Two Primary Amine Groups

In order to resolve the increasing resistance phenomena of the Gram-negative bacteria against single chain quaternary ammonium salts (QAS), lysine with a pedant fluorinated bis-ammonium salts was synthesized and its antimicrobial properties were evaluated in this work. The novel fluorinated bis-ammonium salts shows similar activity with conventional single chain quaternary ammonium salts against Gram-positive bacteria but stronger activity against Gram-negative bacteria and yeast compared with the single chained counterpart.