Bis-8-hydroxyquinoline-armed diazatrithia-15-crown-5 and diazatrithia-16-crown-5 ligands: possible fluorophoric metal ion sensors.

The synthesis and preliminary photophysical properties of a series of diazatrithia-15-crown-5 and diazatrithia-16-crown-5 ligands containing two 8-hydroxyquinoline sidearms are reported. The ligands were prepared by a two-step process. First, diazatrithiacrown ethers 11 and 12 were prepared by treating bis(alpha-chloroamide) 5 with various dimercaptans followed by reduction using a boron-THF complex. Hydroxymethyl-substituted macrocycle 12 was rearranged to hydroxy-substituted diazatrithia-16-crown-5 in refluxing aqueous HCl. Macrocyclic diamines 11-13 were converted to either 5-chloro-8-hydroxyquinolin-7-ylmethyl-substituted diazatrithiacrown ethers 14-16 by a Mannich aminomethylation reaction or to 8-hydroxyquinolin-2-ylmethyl-substituted diazatrithiacrown ethers 17-19 by reductive amination using 8-hydroxyquinoline-2-carboxaldehyde. Preliminary photophysical studies show that ligands 16 and 19 exhibit increased fluorescence in the presence of Zn(2+), indicating that these ligands could be chemical sensors for Zn(2+).     

Zinc(II)-selective sensors based on dibenzo-24-crown-8 in PVC matrix

Membranes of dibenzo-24-crown-8 (I) as an ion active material in poly(vinylchloride) (PVC) based matrix have been tried for zinc(II)-selective sensors. The effect of anion excluder, sodium tetraphenylborate (NaTPB) and plasticizers, tris(2-ethylhexyl)phosphate (TEP), tributylphosphate (TBP), dibutylphthalate (DBP), dibutyl(butyl)phosphonate (DBBP), 1-chloronaphthalene (CN) and dioctylphthalate (DOP) on the performance of the membrane electrodes has also been studied. It was observed that the membrane having the composition (I): PVC:NaTPB:DOP in the ratio 10:200:2:100 gave the best results with a wide working concentration range of 9.2 × 10⁻⁵ to 1.0 × 10⁻¹ M, Nernstian slope of 29.0 ± 0. 5 mV/decade of activity, fast response time of 12 s and good selectivity over a number of mono-, bi-, and trivalent cations. The sensor works well in a pH range 4.8-6.2 and can be employed for the estimation of zinc ions in partially non-aqueous medium having up to 10% (v/v) methanol, ethanol or acetone content. The practical utility of the sensor has been demonstrated by using it successfully as an indicator electrode in the potentiometric titration of Zn²⁺ with EDTA and also for the determination of Zn²⁺ in a real sample analysis of wastewater.     

Synthesis of new proton-ionizable and neutral macrocyclic,macrobicyclic and macrotricyclic crown compounds containing dibenzo-16-crown-5 units

Fifteen new macrocyclic, macrobicyclic and macrotricyclic crown ether compounds with sym-dibenzo-16-crown-5 units have been prepared. The series includes macrocyclic polyether and bis(crown ether) compounds with proton-ionizable carboxylic or phosphonic acid monoethyl ester groups and bis(crown ether) and macrotricyclic polyether compounds with two sym-dibenzo-16-crown-5 units linked by amide, diamide, or diester functions.     

Isomeric 2,6-pyridino-cryptands based on dibenzo-24-crown-8

Cryptands 4 and 5 were synthesized from cis- and trans-bis(hydroxymethylbenzo)-24-crown-8 by reaction with pyridine-2,6-dicarboxylic acid chloride in 42 and 48% yields, respectively. The new cryptands form pseudorotaxanes with the paraquat derivative N,N'-bis(beta-hydroxyethyl)-4,4'-bipyridinium bis(hexafluorophosphate) ("paraquat diol", 6): Ka=1.0x10(4) and 1.4x10(4) M-1, respectively. The cryptands also form complexes with ammonium hexafluorophosphate. Formation of the paraquat/cryptand-based pseudorotaxanes can be switched off and on in a controllable manner on the basis of the cryptands' abilities to complex KPF6 strongly, providing a new mechanism for control of molecular shuttles. K+ displaces paraquat diol from the cryptands, converting yellow-orange solutions to colorless; however, addition of 18-crown-6 binds the KPF6 and allows the colored cryptand-paraquat complex to reform. Crystal structures are reported for both cryptands, both paraquat diol-based pseudorotaxanes, both NH4PF6 complexes, and both KPF6 complexes.     

A cyclopendant complexon based on dibenzo-18-crown-6

A derivative of dibenzo-18-crown-6 containing dihydroxyphosphorylmethyl groups in the 4, 5, 4′, and 5′ positions of the benzene ring has been synthesized. Unlike dibenzo-18-crown-6, its phosphorylated derivative does not form stable complexes with cations of alkali and alkaline-earth metals. Complexes with transition metals are water-insoluble in most cases. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1789–1791. September, 1998.     

Cone di-ionisable calix[4]arene-1,3-crown-5 ligands with elongated pendant side arms: synthesis and metal ion extraction

Abstract

Syntheses of p-H-calix[4]arene-1,3-crown-5 and p-tert-butylcalix[4]arene-1,3-crown-5 ligands with two elongated, proton-ionisable side arms in the cone conformation are described. For solvent extractions from aqueous solution into chloroform, the influence of lengthening the lower rim proton-ionisable side arms and addition of para substituents to the upper rim of the calix[4]crown scaffold on the efficiency and selectivity of metal cation solvent extraction are evaluated.     

133Cs NMR study of Cs+ ion complexes with dibenzo-21-crown-7 and dibenzo-24-crown-8 in some mixed solvents

Complexation of the cesium ion with macrocyclic ligands, dibenzo-21-crown-7 and dibenzo-24-crown-8, was studied in binary solvent mixtures of dimethylsulfoxide with acetone, acetonitrile, propylene carbonate, pyridine and hexamethylphosphoramide (HMPA) as well as in pyridine-methanol mixtures. In the first four binary mixtures the complexation constants increased with decreasing amounts of dimethylsulfoxide (DMSO), the trend is reversed in the DMSO-HMPA system. In all of the above cases, the variation of the stability constant with composition was monotonic and showed good correlation with the inherent solvating ability of the neat solvents which form the mixture. In the pyridine-methanol system, however, for both complexes, the log K_f vs composition plots show several changes in direction. This behavior is probably due to a change in the structure of this binary solvent as the composition of the medium is varied.     

Metal ion extraction by cone p-tert-butylcalix[4]arene-1,3-crown-5 with two N-(X)sulfonyl carbamoylmethoxy side arms and -1,3-monothiacrown-5 analogues

Four cone p-tert-butylcalix[4]arene-1,3-monothiacrown-5 ligands each with two N-(X)sulfonyl carbamoylmethoxy side arms are synthesized for comparison with analogs having only oxygen heteroatoms in the crown ether ring. Solvent extractions of hard alkali metal and alkaline earth metal cations, intermediate Pb²⁺, and soft Hg²⁺ from aqueous solutions into chloroform by these ligands are utilized to probe the effects of sulfur replacement in the crown ether ring on metal ion complexation.     

苯并-15-冠-5和二苯并-18-冠-6萃取分离铟(III)的研究

本文用斜率法、饱和法以及通过与萃取合物相对应的冠醚配合物晶体的制备及其性质研究, 探讨了In^3^+的萃取机理, 测定并计算了表观萃取平衡常数, 将此萃取体系应用于铟和某些体系应用于铟和某些金属离子的萃取分离, 亦获得较好的结果.     

Effect of solvent upon competitive liquid-liquid extraction of alkali metal cations by isomeric dibenzo-16-crown-5-oxyacetic acids

The selectivity and efficiency of competitive liquid-liquid extraction of alkali metal cations into organic solvents containingsym-(octyl)dibenzo-16-crown-5-oxyacetic acid (2) andsym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid (3) have been determined. Solvents examined include: dichloromethane, chloroform, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, benzene, toluene,p-xylene, chlorobenzene, 1,2-dichlorobenzene, and 1,2,3,4-tetrahydronaphthalene. The Na⁺/K⁺ and Na⁺/Li⁺ extraction ratios are highest in chloroform. The extraction selectivity is found to correlate with the diluent parameter (DP) of the organic solvent.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Sorption of copper salts by a polymer based on dibenzo-18-crown-6

The Sorption of Cu(NO₃)₂ and CuCl₂ by a polymer containing immobilized dibenzo-18-crown-6 from binary and multicomponent ethanol solutions was studied. In the sorbent phase copper exists as the Cu²⁺ cations, which form a 11 complex with the macrocyclic ligand. The constant of the transfer of Cu(NO₃)₂ from the solution to the polymer was calculated.ESR spectra were obtained by V. P. Barveno.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 67–69, January, 1995.     

Interaction of hydronium ion with dibenzo-18-crown-6: NMR, IR, and theoretical study

Interaction of dibenzo-18-crown-6 (DBC) with H 3O (+) (HP) in nitrobenzene- d 5 and dichloromethane- d 2 was studied by using (1)H and (13)C NMR spectra and relaxations, FTIR spectra, and quantum chemical DFT calculations. NMR shows that the DBC*HP complex is in a dynamic equilibrium with the reactants, the equilibrium constant K being 0.66 x 10 (3), 1.16 x 10 (4), and 1.03 x 10 (4) L x mol (-1) in CD 2Cl 2, nitrobenzene, and acetonitrile, respectively. The complex appears to have a C 2 v symmetry in NMR, but FTIR combined with DFT normal mode calculations suggest that such high symmetry is only apparent and due to exchange averaging of the structure. FTIR spectra as well as energy-optimized DFT calculations show that the most stable state of the complex in solution is that with three linear hydrogen bonds of HP with one CH 2-O-CH 2 and two Ar-O-Ar oxygen atoms. The structure is similar to that found in solid state but adopts a somewhat different conformation in solution. The dynamics of exchange between bound and free DBC was studied by NMR transverse relaxation. It was found to be too fast to give reproducible results when measured with the ordinary CPMG sequence or its variant DIFTRE removing residual static dipolar interaction, but it could be established by rotating-frame measurements with high intensity of the spin-lock field. The correlation time of exchange was found to be 5.6 x 10 (-6) and 3.8 x 10 (-6) s in dichloromethane and nitrobenzene, respectively. Such fast exchange can be explained by cooperative assistance of present water molecules.     

Structures of sym-(R)dibenzo-16-crown-5-oxyacetic acids and their alkali metal cation binding

To provide insight into the influence of geminal group (R) variation in sym-(R)dibenzo-16-crown-6-oxyacetic acids upon their selectivity in alkali metal cation separations by solvent extraction and liquid membrane transport, studies have been conducted for R=hydrogen and decyl in homogeneous solutions by ¹H NMR spectroscopy and titration calorimetry and in the solid state.     

Stabilities in water and transfer activity coefficients from water to nonaqueous solvents of 15-crown-5 and 16-crown-5-metal ion complexes

Stability constants of 1 : 1 16-crown-5 (16C5)-metal ion complexes were determined in water at 25°C by conductometry and potentiometry with ion-selective electrodes. The selectivity sequences of 16C5 in water for univalent and bivalent metal ions are Ag⁺ > Na⁺ Tl⁺ > K⁺ and Sr²⁺ > Ba²⁺ Pb²⁺, respectively. The stability of a given 16C5-metal ion complex in water is much lower than might be expected on the basis of the solvation power (i.e. relative solubility of the metal ion) of water for the metal ion. The same tendency is observed for the cases of 15-crown-5 (15C5) -metal ion complexes. Transfer activity coefficients () of 15C5 and 16C5 for tetradecane (TD)/water, TD/methanol, TD/acetonitrile, and propylene carbonate/water systems were determined at 25°C. From these data, contributions of a methylene group and an ether oxygen atom to the log value of a crown ether were then obtained. The values from water to acetonitrile, propylene carbonate, and methanol of 15C5- and 16C5-univalent metal ion complexes were calculated, s, M⁺, and L being a solvent, a univalent metal ion, and a crown ether, respectively. The log value is greater than the corresponding log value. The log values are negative. This indicates that, although the M^- ions are more soluble in water than in the nonaqueous solvents, when the crown ether forms a complex with the M⁺ ion, the complex becomes more soluble in the nonaqueous solvents than in water, compared with the free crown ether. It was concluded from this finding that the unexpectedly low stability of the crown ether-M⁺ complex in water is attributed to strong hydrogen bonding between ether oxygen atoms of the free crown ether and water.     

Preparation of chloromethyl derivatives of dibenzo-18-crown-6 and syntheses based on them

The reaction of chloromethylated dibenzo-18-crown-6 and some monosubstituted derivatives (4-acetyl-, 4-propionyl-, and 4-tert-butyldibenzo-18-crown-6) was studied. Modification of the chloromethyl group resulted in the synthesis of various dibenzo-18-crown-6 derivatives.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 470–474, April, 1989.     

基于有机硼化合物的氟离子化学传感器的研究进展

有机硼化合物中硼原子空的pπ轨道使其作为路易斯酸能够选择性的结合氟离子,其与氟离子的结合破坏了硼中心与芳香取代基的pπ-π共轭,引起有机硼化合物光物理性质的变化。因此,有机硼化合物能够用作高选择性的氟离子化学传感器材料。本文从具有三芳基硼结构及硼酸或硼酸酯结构的这两类有机硼化合物出发,综述了它们在氟离子化学传感器领域的研究进展。