Influence of medium polarity upon selectivity and efficiency of alkali metal cation sorption by polyether carboxylic acid resins

The influence of medium polarity upon competitive sorption of alkali-metal cations from aqueous and aqueous methanolic solutions by the polymethacrylic acid resin Amberlite CG-50, two acyclic polyether carboxylic acid resins, and six sym-(alkyl)dibenzo-16-crown-5-oxyacetic acid resins has been investigated. Addition of methanol was found to strongly depress the selective Li(+) sorption of CG-50 and one of the acyclic polyether carboxylic acid resins. Enhancement of metal ion-crown ether interactions as the percentage of methanol in the medium was increased accentuates the Na(+) sorption selectivity for the lariat ether carboxylic acid resins. The highest Na(+) sorption selectivity was obtained for sym-(alkyl)-dibenzo-16-crown-5-oxyacetic acid resins with ethyl and propyl groups in 80% methanol-20% water.     

Guanidinium-selective PVC membrane electrodes based on crown ethers

Guanidinium-selective membrane electrodes were constructed with dibenzo-24-crown-8, dibenzo-27-crown-9, tribenzo-27-crown-9 or dibenzo-30-crown-10. The detection limits and selectivity coefficients towards different interfering ions, such as Li⁺, Na⁺, K⁺, NH⁺₄, Mg²⁺ and Ca²⁺ were determined. The electrode with dibenzo-27-crown-9 shows linear response over the range 10^?1–10^?4 M, with selectivity coefficients about 10^?2 for most alkali and alkaline earth metal ions.     

Effect of solvent upon competitive liquid-liquid extraction of alkali metal cations by isomeric dibenzo-16-crown-5-oxyacetic acids

The selectivity and efficiency of competitive liquid-liquid extraction of alkali metal cations into organic solvents containingsym-(octyl)dibenzo-16-crown-5-oxyacetic acid (2) andsym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid (3) have been determined. Solvents examined include: dichloromethane, chloroform, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, benzene, toluene,p-xylene, chlorobenzene, 1,2-dichlorobenzene, and 1,2,3,4-tetrahydronaphthalene. The Na⁺/K⁺ and Na⁺/Li⁺ extraction ratios are highest in chloroform. The extraction selectivity is found to correlate with the diluent parameter (DP) of the organic solvent.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Competitive transport of alkali metal ions from aqueous media into toluene solutions of 2-(sym-dibenzo-16-crown-5-oxy)-decanoic acid. A comparative study

Competitive permeation of alkali metal ions from an alkaline source phase into or through a toluene phase facilitated by the lipophilic crown ether carboxylic acid 2-(symdibenzo-16-crown-5-oxy)-decanoic acid is studied in liquid—liquid extraction, bulk liquid membrane transport, and emulsion liquid membrane transport. Most rapid transport was obtained in emulsion liquid membrane experiments. Some differences in selectivity orders for alkali metal permeation were observed for the three separation techniques.     

Structures of sym-(R)dibenzo-16-crown-5-oxyacetic acids and their alkali metal cation binding

To provide insight into the influence of geminal group (R) variation in sym-(R)dibenzo-16-crown-6-oxyacetic acids upon their selectivity in alkali metal cation separations by solvent extraction and liquid membrane transport, studies have been conducted for R=hydrogen and decyl in homogeneous solutions by ¹H NMR spectroscopy and titration calorimetry and in the solid state.     

Kinetics of partition between aqueous solutions of salts and bulk liquid membranes containing neutral carriers

The relationship between the rates of transport of alkali metal cations through a bulk chloroform liquid membrane containing polynactin or dibenzo-18-crown-6 as neutral carrier and the rates of uptake and release of cation at the interfaces between aqueous phase and membrane phase were investigated. The fluxes of cations through the membranes and cation-distribution ratios between aqueous solution and membrane were strongly dependent on the anions present. The distribution ratio increased in the following order: Cl^? < NO₃^? < SCN^? < ClO₄^?, and the flux increased in the same order as the distribution ratio, except for the fluxes of KSCN and KClO₄ with polynactin. In the case of polynactin, the flux of KSCN was comparable to that of KClO₄ in spite of the fact that KSCN was less soluble in the membrane than was KClO₄. In order to clarify the cause of this apparently contradictory behavior, the apparent rate constants of uptake and release of potassium were determined independently using an equation derived from Fick's first law of diffusion. From the rates of uptake and release, it was suggested that the overall rate of cation transport through the membrane was dependent on the rate of release rather than that of uptake.     

Extraction of Co(II) and Ni(II) ammine cations from aqueous solutions into chloroform by highly lipophilic crown carboxylic acids

The proton-ionizable crown ethers, 2-[(sym-dibenzo-14-crown-4)oxy]-decanoic acid (1), 2-[sym-dibenzo-16-crown-5)oxy]decanoic acid (2), and 2-[sym-dibenzo-19-crown-6)oxy]decanoic acid (3) efficiently extract Co(II) and Ni(II) ammine cations from highly alkaline aqueous solutions (pH>10) into chloroform. For extractions of the individual metal species,2 is more efficient than1 or3. In competitive extraction systems, good selectivity for Co(II) ammine cations over Ni(II) ammine cations is observed.     

Stability of Complexes of NH4 + with 18-Crown-6, Dicyclohexyl-18-Crown-6, Dibenzo-18-Crown-6 and Dibenzo-24-Crown-8 in Water Saturated Nitrobenzene

From extraction experiments with ²²Na tracer, the exchange extraction constants corresponding to the NH₄ ⁺(aq) + NaL⁺ (nb)NH₄L⁺(nb) + Na⁺ (aq) equilibrium taking place in the two-phase water-nitrobenzene system (L = 18-crown-6, dicyclohexyl-18-crown-6, dibenzo-18-crown-6 and dibenzo-24-crown-8; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the stability constants of the NH₄L⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the order dibenzo-24-crown-8 (DB24C8) < dibenzo-18-crown-6 (DB18C6) < dicyclohexyl-18-crown-6 (DCH18C6) < 18-crown-6 (18C6).     

Effect of structural variation within sym-(R)dibenzo-16-crown-5-oxyacetic acid resins upon the selectivity and efficiency of alkali-metal cation sorption

Five new crown ether carboxyhc acid resins have been prepared by condensation polymerization of sym-(R)dibenzo-16-crown-5-oxyacetic acids with formaldehyde. Competitive alkali-metal cation sorption by these novel resins, which contain both ion-exchange and crown ether binding sites for metal ions, has been investigated. As the R-group was varied (methyl, ethyl, propyl, butyl, hexyl and decyl) both the alkali-metal cation sorption selectivity and efficiency were affected. The highest efficiency (loading) and Na⁺ sorption selectivity were obtained when R = methyl, ethyl and propyl. The longer alkyl groups were found to be detrimental to both sorption efficiency and selectivity.     

Study of Bulk Membrane Transport of Some Heavy Metal Cations Using Three Macrocyclic Ligands Containing Oxygen and Nitrogen Heteroatoms

The transport experiments of Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Ag⁺ and Pb²⁺ metal cations were carried out by dibenzo-18-crown-6 (DB18C6), dibenzyl-diaza-18-crown-6 (Dibenzyl-diaza-18C6) and di-tert-butyl-dibenzo-18-crown-6 (Di-tert-butyl-DB18C6) using chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE) and nitrobenzene (NB) organic solvents as liquid membranes. The source phase contained equimolar concentration of these metal cations and the source and receiving phases being buffered at pH=5 and pH=3, respectively. The obtained results show that the selectivity and the efficiency of transport for these heavy metal cations change with the nature of the ligand and also the organic solvents, which were used as liquid membranes in these experiments. A good selectivity was observed for silver (I) ion by dibenzyl-diaza-18C6 in all membrane systems. Dibenzo-18C6 and di-tert-butyl-DB18C6 showed the highest transport efficiency for cobalt (II) ion. The effect of stearic acid on transport efficiency was also investigated and the results show that the efficiency of transport of the heavy metal cations increases in the presence of this organic acid.     

Dibenzo-18-crown-6-tricarbonylchromium compounds. Synthesis and substituent derived reversal of ion extraction selectivity

Mono- and bis-(tricarbonylchromium) compounds of dibenzo-18-crown-6 have been synthesized. The compounds exhibit a decreased ability to extract alkali metal salts into organic solvents, indicating an overall electron withdrawal from the oxygen crown by the Cr(CO)₃ substituents. For the disubstituted compound, the normal selectivity for K⁺ over Na⁺ is reversed.     

Extraktion von alkali- und erdalkalimetallionen mit (sym-dibenzo-14-krone-4-oxy)- und (sym-dibenzo-16-krone-5-oxy)-carbonsäuren

(Extraction of alkali on alkaline earth metal ions with (sym-dibenzo-14-crown-4-oxy)- and (sym-dibenzo-16-crown-5-oxy)-carboxylic acids.)The extraction of lithium, sodium, potassium, calcium and some other metal ions with dibenzo-4-crown-4-oxy- and dibenzo-16-crown-5-oxycarboxylic acids containing the groups -CH₂COOH, -(CH₂)₂COOH, -(CH₂)₃COOH, -CH(C₂H₅)COOH and -CH(C₄H₉)COOH was studied. The extraction increases as a function of the lipophilic character of the carboxylic acid group. Calcium, barium and strontium ions are better extracted than Li⁺, Na⁺ and K⁺; there are only small differences among the alkaline earth metal ions. Evaluated from the extraction data, the composition of the extracted species was 1:1 (metal/ligand) for Li⁺, and 1:2 for CaCa²⁺; Na⁺ and K⁺ favour the formation of 1:2 complexes with dibenzo-14-crown-4-derivatives bbut 1:1 complexes with dibenzo-16-crown-5-oxy-carboxylic acids. The dependence of the distribution ratio on pH does not provide unequivocal evidence for the composition of the extracted compounds.     

Competitive transport of toxic metal ions by polymer inclusion membranes

The paper gives a short overview of application of polymer inclusion membranes (PIMs) for separation and removal of metal ions. Investigation of the selective removal of toxic metal ions, i.e. Cr(VI), Cd(II), Zn(II) from acidic chloride aqueous solutions, as well as trace radionuclides, i.e., ¹³⁷Cs, ⁹⁰Sr and ⁶⁰Co from wastewaters using transport across polymer inclusion membranes was studied. The carriers, i.e., tri-n-octylamine for anionic metal species, as well as dibenzo-21-crown-7, tertbutyl-dibenzo-21-crown-7, and dinonylnaphtalenesulfonic acid for metal cations were incorporated into polymer inclusion membranes composed of cellulose triacetate as a support and o-nitrophenyl pentyl ether as a plasticizer. Selective transport of chromium(VI) over zinc(II) and cadmium(II) chloride complexes through PIMs was observed. Competitive transport of trace radionuclide ions, i.e., ¹³⁷Cs, ⁹⁰Sr, and ⁶⁰Co from NaNO₃ aqueous solutions across polymer inclusion membranes containing a mixture of dinonylnaphtalenesulfonic acid, and dibenzo-21-crown-7 as the carrier provide the selectivity order Cs(I)>Sr(II)>Co(II).     

Separation and Removal of Metal Ionic Species by Polymer Inclusion Membranes

Competitive alkali metal cation transport across polymer inclusion membranes (PIMs) containing sym-(alkyl)dibenzo-16-crown-5-oxyacetic acid carriers provides excellent selectivity for Na⁺ transport with the total fluxes being strongly influenced by the length of the alkyl chain that is attached geminal to the functional side arm in the lariat ether. Removal of chromium(VI) anions by PIMs from acidic aqueous phases was also investigated. Using tri-n-octylamine (TOA) as the ion carrier, Cr(VI) was removed by a PIM to decrease the source phase metal concentration from 1.0 to 0.010 ppm after 30 hours of transport. Competitive transport of Cr(VI) and Cr(III) ions from acidic source phases through PIMs and supported liquid membranes (SLMs) containing TOA and tri-n-octylphosphine oxide (TOPO) as carriers was evaluated and a very high Cr(VI)/Cr(III) separation ratio of 4800 was achieved with a PIM containing TOA. Competitive transport of Zn(II), Cd(II), and Cr(VI) from acidic aqueous solutions through PIMs containing TOA was investigated. The selectivity order for metal ion transport was: HCrO₄ ^–>CdCl₄ ^2–+CdCl₃ ^–>ZnCl₄ ^2–+ ZnCl₃ ^–. Non-contact atomic force microscopy was used to obtain images of the pores in cellulose triacetate membranes containing a plasticizer.     

Some synthesized polymeric composite resins for the removal of Co(II) and Eu(III) from aqueous solutions

Summary The ion-exchange and sorption characteristics of new polymeric composite resins, prepared by gamma radiation were experimentally studied. The composite resins show high uptake for Co(II) and Eu(III) ions in aqueous solutions in a wide range of pH. The selectivity of the resins for Co(II) or Eu(III) species in presence of some competing ions and complexing agents (as Na⁺, Fe³⁺, EDTANa₂, etc.) was compared. Various factors that could affect the sorption behavior of metal ions (Co(II) and Eu(III)) on the prepared polymeric composite resins were studied such as ionic strength, contact time, volume mass ratio.     

Solid-state structures of sym-dibenzo-16-crown-5 and its derivatives

Solid-state structures of sym-dibenzo-16-crown-5 (1) and five derivatives with one or two substituents on the three-carbon bridge have been determined. The derivatives with three sp³-hybridized carbons include sym-(propyl)dibenzo-16-crown-5 (4), sym-(pentafluorophenoxy)-dibenzo-16-crown-5 (5), and sym-[di(methoxymethyl)]dibenzo-16-crown-5 (6). Structures of two derivatives with sp²-hybridization of the central carbon (7 and 8) were also determined. Twisting of the three-carbon bridge causes one of the terminal methylene groups to be oriented within the polyether cavity.     

Evolution of Organized Lariat Ether Alcohol and Diol Hydrate Macrostructures in the Solid State

Lariat ether alcohols and diols derived from dibenzo-14-crown-4crystallize in the anhydrous form or as hydrogen-bondedmonohydrates or networks depending upon thepolyether ring substitutents and the composition of the aqueous organic crystallization solvent. Supramolecular structures are created when the lariat ether alcohol sym-(hydroxy)dibenzo-14-crown-4 (1) with ``sticky ends' of ether oxygens and hydroxyl protons, hydrogen bond to each other via bridging water molecules to form three-dimensional networks. For crystallization of 1 from 30% aqueous acetonitrile, this self-association is sufficiently strong to spontaneously generate a supramolecular structure with water channels.     

Separation of alkali and alkaline earth metals by polyethers using extraction chromatography. Effect of diluent

The separation of alkali and alkaline earth metals by means of an acyclic polyether, 1,13-bis(8-chinolinyl)-1, 4, 7, 10, 13-pentaoxatridecane (CPOD), and cyclic polyethers, benzo-15-crown-5 (BC), dibenzo-18-crown-6 (DBC) and dicyclohexyl-18-crown-6 (DCHC), using extraction chromatography has been studied. The alkali metals can be effectively separated using SCN⁻ ions. Different elution sequences for these groups were observed using chloroform and mesitylene and diluents for the polyethers.     

Stability of crown-ether complexes with alkali-metal ions in ionic liquid-water mixed solvents

Stability constants of sodium and cesium ion complexes with 18-crown-6 (18C6) and dibenzo-18-crown-6 (DB18C6) in N-butyl-4-methyl-pyridinium tetrafluoroborate [BMP][BF₄] aqueous solutions were measured using the ²³Na and ¹³³Cs NMR technique at 23 °C. To the best of our knowledge, the estimated values of stability constants reported in this study are the first such values given for ionic liquid solutions. The cationic exchange between the free and complexed species is rapid, and only formation of the 1:1 complexes [M(18C6)]⁺ and [M(DB18C6)]⁺ (M = Na⁺, Cs⁺) were observed. The complex formation constants demonstrated a strong dependence on the [BMP][BF₄] concentration. For [M(18C6)]⁺, in solutions with a 0.33–0.70 mole fraction of water in [BMP][BF₄], lg K values are found to be more than one unit higher than the lg K values measured in pure aqueous solutions, although no information concerning the influence of [BMP][BF₄] on the complex formation selectivity could be observed. DB18C6 complexes revealed significantly lower stability under the same conditions. An extrapolation to zero water content gave the lg K = 2.42 for [Cs(18C6)]⁺ in [BMP][BF₄]. It was discovered that when added to water, [BMP][BF₄] increases the solubility of crown ethers and decreases the solubility of alkali metal nitrates. Complex formation with crown ethers enhances the solubility of alkali metal salts in [BMP][BF₄].     

A Polarographic Study on Some Complexes of Pb2+ and Cd2+ with Macrocyclic Polyethers (Crown Ethers)

Abstract

Complexation constants of Pb²⁺ and Cd²⁺ nitrates with five crown compounds (18-crown-6, dicyclohexyl-18-crown-6, benzo-15-crown-5, dibenzo-24-crown-8 and 12-crown-4), have been determined by d.c. and a.c. polarographic measurements in aqueous medium using 0.1 M HNO₃ as supporting electrolyte. The complexes of lead with 18-crown-6 and dicyclohexyl-18-crown-6 are very stable which may be attributed to the partially covalent bonds formed by this metal ion.