The synthesis of macrocyclic polyether-diesters incorporating 1,10-phenanthrolino and 1,8-naphthyridino subunits

The preparation of a series of macrocycles, formed by reaction of HO-(-CH₂-CH₂-O-)_nH with 1,10-phenanthroline-2,9-dicarbonyl chloride (n = 2,3,4) and 1,8-naphthyridine-2,7-dicarbonyl chloride (n = 3,4), is described. An improved synthetic route to 2,7-dimethyl-1,8-naphthyridine 9 is also reported.     

几个硫杂环配体的合成

4，5—二硫基—1，3—二硫杂戊烯—2—硫酮[dmit]的锌配合物与有机卤化物 反应，合成了含有吸电子基的1，3—二硫杂戊烯—2—硫酮的配体，用IR，^1H NMR，MS等表征了其结构．     

Synthesis of macrocyclic ligands containing the indole ring system

2,7-Diformyl-3-methyl-4,6-dimethoxyindole (6) has been synthesized and converted by metal template reactions into the macrocyclic complexes (10–12).     

Synthesis and application of macrocyclic binaphthyl ligands with extended chiral bias

Two macrocyclic and one non-cyclic chiral diphosphine ligand containing a 2,2′-bridged binaphthyl unit were synthesized in six steps from (R)-2,2′-dimethoxy-1,1′-binaphthyl in overall yields of 25 and 17%, respectively. The new ligands showed asymmetric inductions of up to 98% e.e. if used in palladium catalyzed allylic alkylation reactions.     

Synthesis and coordination chemistry of macrocyclic ligands featuring NHC donor groups

Poly-NHC (NHC = N-heterocyclic carbene) ligands emerged almost immediately after the first stable NHCs had been described. Macrocyclic ligands, featuring NHC donor groups and their metal complexes, however, remained rare until recently. This perspective highlights modern developments in the fields of synthesis and coordination chemistry of macrocyclic poly-NHC ligands. These include the synthesis of tetracarbene ligands which were obtained from complexes of β-functionalized isocyanides followed by cyclization of the coordinated iscocyanide ligands to NH,NH-functionalized NHCs and the subsequent metal template controlled bridging alkylation of the NH,NH-NHCs to yield the macrocycle. The template synthesis of ligands featuring a mixed NHC/phosphine donor set like [11]ane-P(2)C(NHC) and [16]ane-P(2)C(NHC)(2) by linkage of NH,NH-NHCs to different phosphines is also presented. Finally, methods for the preparation of cyclic polyazolium salts, their deprotonation and metalation and the different modes of coordination of such macrocyclic poly-NHC ligands are discussed.     

Synthesis of novel macrocyclic di‐ and tetralactams containing triazole subunits

The new macrocyclic di‐ and tetralactams 9 , 15 , and 16 were obtained in 16–24% yields by heating the appropriate bis‐amines 7 or 8 with the corresponding bisaldehyde 5 or 14 in refluxing acetic acid under high‐dilution conditions. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:551–559, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10191     

Synthesis and properties of calixarene analogs incorporating a thiophene unit in the macrocyclic ring

Calixarene analogs containing a thiophene unit in the macrocyclic ring were prepared by a stepwise method. The macrocycles adopt a cone‐like form as the preferred conformation in solution. The induced chemical shift change, nOe experiment, and ¹H relaxation time (T₁) measurement supported the fact that the macrocycle forms a complex with the N‐methylpyridinium salt. In contrast, O‐tetramethylated macrocycles and linear phenol‐formaldehyde tetramer, could not efficiently include the N‐methylpyridinium salt.     

Synthesis and reactivity of zirconium and hafnium complexes incorporating chelating diamido-N-heterocyclic-carbene ligands

Early transition metal complexes employing a diamido N-heterocyclic carbene (NHC) ligand set (denoted [NCN]) render the centrally disposed NHC moiety stable to dissociation. Aminolysis reactions with the mesityl-substituted ligand precursor (^Mes[NCN]H₂) and M(NMe₂)₄ (M = Zr, Hf) provide bis(amido)-NHC-metal complexes that can be further converted to chloro and alkyl derivatives. Activation of ^Mes[NCN]M(CH₃)₂ with [Ph₃C][B(C₆F₅)₄] yields {^Mes[NCN]MCH₃}{B(C₆F₅)₄}, which is surprisingly inactive for the polymerization of 1-hexene. The zirconium cation did, however, show moderate ability to catalytically polymerize ethylene. The hafnium dialkyls are thermally stable with the exception of the diethyl complex, ^Mes[NCN]Hf(CH₂CH₃)₂, which undergoes β-hydrogen transfer and subsequent C–H bond activation with an ortho-methyl substituent on the mesityl group. The hafnium dialkyl complexes also insert carbon monoxide and substituted isocyanides to yield η²-acyls and η²-iminoacyls, respectively. In some circumstances, further C–C bond coupling occurs to yield enediolates and eneamidolate metallocycles. The molecular structures of ^Mes[NCN]Hf(CH₂CHMe₂)₂, ^Mes[NCN]Hf(η²-(2,6-Me₂C₆H₃NCCH₃)(CH₃), ^Mes[NCN]Hf(η²-(2,6-Me₂C₆H₃NCCH₃)₂, ^Mes[NCN]Hf(OC(CH₃)C(CH₃)NXy), and [^Mes[NCN]Hf(OC(ⁱBu)C(ⁱBu)O)]₂ are included.     

Synthesis of well-defined tower-shaped 1,3,5-trisubstituted adamantanes incorporating a macrocyclic trilactam ring system

We describe the synthesis of two novel well-defined tower-shaped 1,3,5-trisubstituted adamantanes 30 and 33 that incorporate a macrocyclic trilactam ring system. Each nanoscale molecule has a broad tripodal base consisting of three identical sulfur-containing termini as the tripod feet, 4-acetylsulfanylmethylphenyl units in the case of 30 and 3,5-bis(acetylsulfanylmethyl)phenyl units in the case of 33. The sulfur atoms are designed to bind the molecules trivalently to the apex of a gold-coated commercial AFM tip through formation of three S-Au bonds. The rigid adamantane-derived head unit with a single hydrogen atom at the apex is designed to scan the sample. Molecules 30 and 33 are synthesized from 1,3,5-triethynyladamantane by a series of Sonogashira coupling reactions involving terminal alkynes and aryl iodides. A macrocyclic trilactam unit is included for added rigidity. We demonstrate that molecule 30 is sufficiently large and rigid to be visualized by a conventional AFM tip. These nanoscale molecules may also find application as chemically well-defined nanoscale objects for calibration of AFM tips.     

Synthesis, crystal structures and DNA-binding properties of dinuclear complexes with macrocyclic ligands

Two symmetrical macrocyclic dinuclear complexes, [Cu₂L¹(ClO₄)₂(H₂O)₂][Cu₂L¹(H₂O)₂] (ClO₄)₂ (1) and [Cu₂L²(ClO₄)₂] (2), (where H₂L¹ and H₂L² are the [2?+?2] condensation products of 1,3-diaminopropane with 2,6-diformyl-4-methylphenol and 2,6-diformyl-4-flurophenol, respectively), have been synthesized and characterized. The electronic and magnetic properties of the complexes were studied by cyclic voltammetry and magnetic susceptibility. There are strong antiferromagnetic couplings between the two copper(II) centers in both complexes. The strongly electron-withdrawing fluorine groups in H₂L² weaken the antiferromagnetic exchange, but make the metal centers more easily reduced than its analog H₂L¹. The interactions of the complexes with calf thymus DNA were studied by UV?CVis and CD spectroscopic techniques.     

Synthetic macrocyclic ligands. II. Synthesis of a photochromic crown ether

A photochromic crown ether with two anthracene nuclei is synthesized and the metal ion dependence of its photo and thermal reactions is studied.     

Synthesis and coordination properties of new macrocyclic ligands: equilibrium studies and crystal structures

The synthesis and characterization of two new macrocyclic ligands, the bis-macrocyclic compound 2,6-bis(1,4,13-triaza-7,10-dioxacyclopentadec-1-ylmethyl)phenol (L) and 38-methoxy-1,4,13,16,19,28-hexaaza-7,10,22,25-tetraoxatricyclo[14.14.7.1(32,36)]octatriconta-32,34,Delta(36,38)-triene (L1) are reported. Equilibrium studies of basicity and coordination properties toward metal ions such as Cu(II), Zn(II), Cd(II) and Pb(II) were performed for ligand by potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, I= 0.15 mol dm(-3)). L behaves as a hexaprotic base (logK(1)= 10.93, logK(2)= 9.70, logK(3)= 8.79, logK(4)= 8.05, logK(5)= 6.83, logK(6)= 2.55). All metal ions form stable mono- and dinuclear complexes: logK(MLH(-1))= 25.61 for Cu(II), 15.37 for Zn(II), 12.58 for Cd(II) and 13.79 for Pb(II); logK(M(2)LH(-1))= 31.61 for Cu(II), 23.38 for Zn(II), 24.49 for Cd(II) and 23.68 for Pb(II). All these dinuclear species show a great tendency to add the OH(-) group: the equilibrium constant for the addition reaction was found to be logK(M(2)LH(-1)OH)= 4.77 for Cu(II), 5.66 for Zn(II), 2.8 for Cd(II) and 3.18 for Pb(II). In the case of Ni(II), kinetic inertness prevents the possibility of solution studies. The dinuclear solid adducts [Ni(2)H(-1)L(N(3))(3)].EtOH and [Cu(2)H(-1)L(N(3))](ClO(4))(2) were characterized by X-ray analysis.     

Synthesis of uranium complexes incorporating extended azo-imine ligands: Molecular and electronic structure

The new azo-imine ligands 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl)diazenyl) phenylimino)methyl)phenol, H₂L¹, 1a, and 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl) diazenyl)p-chlorophenylimino)phenol, H₂L², 1b, were prepared. Reaction of H₂L¹;1a, and H₂L²;1b, with uranyl nitrate hexahydrate afforded the mononuclear complexes of compositions [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b, complexes respectively. The newly synthesised ligands (1a and 1b) and the complexes (2a and 2b) were characterised unequivocally. The x-ray structure of 2a was determined. The tetradentate dianionic ligand (L¹)^2- coordinated the uranium ion equatorially with a water molecule in the same plane. Two axially coordinated oxo ligands completed the overall pentagonal bipyramid geometry around U(VI) ion. Structural pattern, electron transfer properties (oxidation near 1.32 ​V vs Ag/AgCl) and electronic transitions of [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b have been rationalized by DFT calculations.     

Synthesis, structure, and spectroscopy of phenylacetylenylene rods incorporating meso-substituted dipyrrin ligands

The synthesis, structure, and spectroscopic characterization of a series of phenylacetylenylene rodlike molecules containing dipyrromethene (dipyrrin) ligands are described. The combination of the phenylacetylenylene groups with the porphyrinogenic dipyrrin moieties results in a rich absorption spectroscopy for these compounds, although the fluorescence of the phenylacetylenylene moiety is quenched by presence of the dipyrrin chelator. The Cu(2+) and Fe(3+) complexes of these ligands have been prepared and three of these compounds have been structurally characterized by using single-crystal X-ray diffraction. Unlike other octahedral metal-dipyrrin complexes described to date, one of the iron complexes demonstrates ideal threefold symmetry in the solid-state. The elongated structure and high symmetry of these complexes suggests the use of these meso-substituted phenylacetylenylene ligands as an interesting class of extended, branched molecules for the construction of supramolecular architectures.     

A preliminary study on polyhydrazides incorporating furan moieties

Solution and interfacial polycondensation of difuranic dihydrazides with aromatic or aliphatic dicarboxylic acid dichlorides led to the corresponding polyhydrazides which were characterized in terms of structure and average chain length. Their conversion to the corresponding polyoxadiazoles was also examined. Model compounds were prepared to facilitate the synthesis and the characterization of the polymers.     

Bivalent 3d-metal complexes of malonyl- and succinyldihydrazide based macrocyclic ligands. Synthesis and characterization

Summary The macrocycles 2,10-dimethyl-3,4,8,9,15-pentaazabicyclo-[9.3.1]-pentadeca-1 (15),2,9,11,13-penta-ene-5,7-dione (L) and 2,11-dimethyl-3,4,8,9,10,16-pentaazabicyclo[10.3.1]-hexadeca-1 (16),2,10,12,14-penta-ene-5,8-dione (L) were prepared and characterized by elemental, i.r. and mass spectral data. The macrocycles react with various metal(II) chlorides to yield complexes of the types [MLCl₂H₂O] (M = Mn, Co, Ni, Cu or Zn), [MLCl₂H₂O] (M = Mn, Ni, Cu or Zn) and [Co₃L₂Cl₄]Cl₂. The complexes were characterized by physico-chemical and spectroscopic methods.     

Synthesis,spectral properties and conformational preferences of macrocyclic compounds containing 2,5-dithio-1,3,4-thiadiazole subunits

The syntheses of macrocyles 1–6, containing 2,5 - dithio - 1,3,4 - thiadiazole subunits connected by 1,2-, 1,3- and 1,4-bis(methylene)benzenes, as well as of the appropriate open-chain model compounds 7–12 are described. Structure proofs were afforded by their mass and ¹H NMR spectra. Different decompostion processes upon electron-impact are ascertained for compounds 1–12, depending on the position of the bridges and ortho substitution; therefore, the mass spectra can provide a sensitive diagnostic tool for structure elucidation of positional isomers. The NMR spectral data of macroycyles 1–6, coupled with those of the corresponding open-chain derivatives 7–12, indicate that the preferred conformations are determined primarily by the size and shape of their ring systems. Furthermore, variable-temperature NMR studies on intraannularly methyl substituted macrocyles 3 and 6 provide evidence that the 20-membered mesityl derivative 3 adopt the saddle-shape conformation (IV) (the energy barrier for the restricted rotation of methylene bridges if found to be ΔG^≠= 13.8 kcal/mole at + 5°), while the duryl groups in the 22-membered macrocycle 6 are free rotating even at ?60°.