4-Chlorophenol degradation by chloroperoxidase from Caldariomyces fumago

This study investigated the degradation of 4-chlorophenol (4-CP) by Caldariomyces fumago chloroperoxidase (CPO). Enzymatic oxidations were studied in reaction mixtures at pH 3.0, 4.0, and 6.0 in the presence and absence of Cl⁻ containing 3.5 IU of CPO and 4-CP and hydrogen peroxide concentrations within the range of 0.5–50 and 0.005–50 mM, respectively. Distinct patterns of products regarding color, concentration, and solubility were observed. Reaction mixtures at pH 6.0 containing 3.5 IU of CPO and 5.0 mM 4-CP and H₂O₂ (1:1 stoichiometry) showed the highest 4-CP removal of 95% and the highest formation of a dark precipitate.     

金属离子对氯过氧化物酶在25℃到55℃激活作用以及机理的研究

基于氯过氧化物酶（CPO）的卤化活性分析,发现某些碱土金属（Ca2+, Mg2+）和过渡金属（Co2+, Ni2+）对CPO具有明显的激活及稳定化作用。例如25 ºC时与CPO在纯缓冲溶液中相比,在75 μmol·L-1 Ca2+,90 μmol·L-1 Mg2+,90 μmol·L-1 Ni2+及105 μmol·L-1 Co2+存在时CPO可分别获得1.33,1.37,1.34 及1.27倍的最大相对活性。而在55 ºC,没有金属离子存在时,CPO 30分钟后仅能保留40%的活性,但在Ca2+,Mg2+离子的介质中,CPO的活性可分别保留81% 和 75%。推测这是由于金属离子结合在CPO活性中心周围的酸-碱催化位点Glu183, His105 and Asp106上,通过底物浓集和诱导有利构象来激活CPO. 同时动力学研究表明金属离子对CPO的激活归因于催化效率（kcat）的提高,以及CPO对底物亲和性及选择性的改善。     

Application of various ionic liquids as cosolvents for chloroperoxidase-catalysed biotransformations

Abstract  

Chloroperoxidase from Caldariomyces fumago catalyses oxidation of indole and thioanisole in reaction mixtures containing up to 40% (v/v) of different ionic liquids (ILs). Results indicate that ILs containing tosylate, trifluoroacetate, chloride, and methylsulfate anions are suitable cosolvents for these transformations, yielding high enantiomeric excess and good conversion rates.     

Identification of intermediates in the catalytic cycle of chloroperoxidase

Background: Chloroperoxidase (CPO) is the most versatile of the hemethiolate proteins, catalyzing the chlorination of activated CH bonds and reactions reminiscent of peroxidase, catalase, and cytochrome P450. Despite 30 years of continuous efforts, no intermediates of the enzyme's catalytic cycle have been identified except for compound I. Thus, in the absence of conclusive evidence it is generally believed that the halogenation of substrates proceeds by means of ‘free HOCl’ in solution.Results: The pH profile of chloroperoxidase from Caldariomyces fumago revealed a new active-site complex that can be detected only at pH 4.4. According to ultra-violet (UV) spectroscopy, and by comparison with suitable enzyme models, this intermediate is the HOCl adduct of the iron(III) protoporphyrin(IX). Inactivation of chloroperoxidase by diethyl pyrocarbonate, which interrupts the proton shuttle by modification of the distal histidine, led to the formation of the ⁻OCl adduct of the iron complex, which was identified by comparison with a corresponding active site analogue.Conclusions: The availability of enzyme models of heme-thiolate proteins allowed the identification by UV spectroscopy of both the ⁻OCl adduct and the HOCI adduct of the iron(III) protoporphyrin(IX) of chloroperoxidase. The existence of these previously elusive intermediates suggests that the chlorination catalyzed by CPO, and its corresponding active site analogue, proceeds by Cl⁺ transfer from the HOCl adduct to the substrate bound in the distal pocket of the enzyme.     

Application of various ionic liquids as cosolvents for chloroperoxidase-catalysed biotransformations

Abstract  Chloroperoxidase from Caldariomyces fumago catalyses oxidation of indole and thioanisole in reaction mixtures containing up to 40% (v/v) of different ionic liquids (ILs). Results indicate that ILs containing tosylate, trifluoroacetate, chloride, and methylsulfate anions are suitable cosolvents for these transformations, yielding high enantiomeric excess and good conversion rates. Graphical abstract       

Correlation between the molecular structure and the corrosion inhibition efficiency of chestnut tannin in acidic solutions

The frontier orbital theory and the inhibitor adsorption theory were applied to the results of the quantum calculations and corrosion rate measurements, respectively, in order to elucidate the chestnut tannin inhibitory action on low-carbon steel corrosion in 2 M HCl. Nine major constituents of chestnut tannin—vescalagin, castalagin, vescalin, castalin, gallic acid, ellagic acid, mono-, di- and trigalloylglucose—were modeled by molecular mechanics, molecular dynamics and semiempirical quantum NDDO method with PM3 parametrization. The geometrical structure, the energy of the highest occupied (HOMO) and lowest unoccupied molecular orbital (LUMO), the HOMO–LUMO energy gap, the distribution of the HOMO electron density and the magnitude and direction of the dipole moment were calculated for each molecule. Molecular reactivity that is related to its adsorbability by the HSAB principle, was studied by calculating the absolute electronegativity, absolute hardness and the electron donating ability. The quantum calculations results, coupled with those derived from the adsorption theory, gave a consistent picture of the investigated corrosion system.     

Enzymatic halogenation of pyrazoles and pyridine derivatives

Pyrazole, 1-methylpyrazole and 3-methylpyrazole are chlorinated by the enzyme chloroperoxidase from Caldariomyces fumago, in the presence of potassium chloride and hydrogen peroxide at pH 2.7, yielding the corresponding 4-chloro derivatives in good yields. A 4H-pyrazole is proposed as an intermediate in this reaction. 2-Aminopyridine was converted regiospecifically by the same enzyme into 2-amino-3-chloropyridine, and 8-hydroxyquinoline gave its 5,7-dibromo-derivative in very good yield when bromide ion was used as the halide substrate.     

氯过氧化物酶活性中心结构域中Mn2+与酶催化行为的关系

通过乙二胺四乙酸二钠(EDTA)配位竞争反应结合石墨炉原子吸收及电感耦合等离子体发射检测结果,为氯过氧化物酶(CPO)活性中心血红素丙酸根与金属Mn2+配位结合提供了更直接的证据;基于Mn2+移除前后CPO的紫外特征吸收光谱、圆二色谱以及氯化活性和过氧化活性的变化,阐明了Mn2+的存在对于保持酶活性中心的结构域、稳定CPO的优势构象具有一定作用,是酶分子表现活力所必需的结构元素.本研究还发现移除Mn2+前后CPO血红素活性中心微环境的变化是一个可逆过程,重新引入Mn2+后活性可恢复,并且以外源性Ag+和Cr3+替代Mn2+后,CPO的氯化活性和过氧化活性分别比天然态的酶有所改善,为通过化学修饰提高CPO的催化活性提供了新的途径.     

Hirshfeld partitioning of the electron density: atomic dipoles and their relation with functional group properties

Atomic dipole moments, derived within the Hirshfeld partitioning of the molecular electron density, have been studied for compounds of the type H-X and Cl-X, for a series of functional groups X frequently encountered in organic molecules. In the case of the H-X compounds, the component of the atomic dipole moment on H along the axis connecting H with the central atom in X is found to be linearly correlated with the electronegativity of X, the hardness of X playing no significant role. In the case of the Cl-X compounds, the situation is less clear. However, evidence seems to point to the conclusion that for these compounds, also the group hardness plays an important role.     

Electronic structure of the benzene–tetracyanoethylene complex: A synthesis of molecular orbital and density functional descriptions

The electronic structure of the benzene–tetracyanoethylene electron donor–acceptor complex is investigated at the HF /6-311G ^** level of theory. The computed electronic wave function is analyzed with rigorous interpretive tools that involve both molecular orbital and density functional approaches. The in situ electronegativity difference is calculated at 3.32 eV, resulting in a charge transfer of 0.016. This extent of charge transfer is found to account for only ca. 17% of the interaction energy of ca. 33% of the dipole moment. The remaining part of the dipole moment originates from buckling of the tetracyanoethylene moiety. The dependence of the electronegativity difference on the magnitude of charge transfer is found to be highly nonlinear. © 1994 John Wiley & Sons, Inc.     

Electrostatic interactions in molecular mechanics (MM2) calculations via PEOE partial charges I. Haloalkanes

The PEOE (partial equalization of orbital electronegativity) procedure has been modified slightly and reparametrized for haloalkanes to calculate partial atomic charges suitable for evaluation of dipole moments and electrostatic energies in conjunction with molecular mechanics (MM2) calculations. Dipole moments of 66 haloalkanes are calculated with an average absolute deviation of 0.14 D from experimental values. The conformational energies of 40 compounds have been calculated and the agreement with experimental data is generally good and compares well with calculations by the IDME (induced dipole moment and energy) method. In addition, carbon and proton charges correlate well with C-1s core binding energies and ¹H-NMR (nuclear magnetic resonance) shifts for halomethanes. The most striking benefit of treating electrostatics through a set of partial charges compared to the standard MM2 bond dipole approach is demonstrated by calculations on 1,4-disubstituted cyclohexanes, for which standard MM2 fails to predict the most stable conformation.     

Potent 2,2-diphenyl-1-picrylhydrazyl radical-scavenging activity of novel antioxidants, double-stranded tyrosine residues conjugating pyrocatechol

New potent antioxidants conjugating the catechol (=pyrocatechol; pyrCat) group to two N-termini of modified double-stranded tyrosine residues were synthesized and showed radical scavenging activity with 2,2-diphenyl-1-picrylhydrazyl radical (DPPH radical, DPPH˙) as a free radical model, second-order rate constants for the DPPH˙ scavenging reaction, and the results from electron spin resonance (ESR) studies. It was found that the tyrosine (Tyr) residue and pyrCat containing new antioxidants developed in the study have about 3-20 times more potent antioxidative activity than Trolox, pyrCat, and L-ascorbic acid (VC). In order to elucidate the relationship between antioxidant activity and the molecular orbital states, and to design potent antioxidants we present an interesting approach using an absolute hardness (η)-absolute electronegativity (χ) diagram based on chemical hardness. It was shown that quantum chemicals were required to develop potent antioxidants.     

手性环氧氯丙烷的CPO酶催化不对称合成

基于氯过氧化物酶(CPO)对有机底物的手性识别,以CPO催化、叔丁基过氧化氢(TBHP)氧化3-氯丙烯合成手性(R)-环氧氯丙烷,并引入多羟基化合物为添加剂提高了目标产物的产率及对映选择性.反应主要受体系的pH值以及CPO用量等因素控制.UV-vis及CD光谱分析表明,反应体系中引入多羟基化合物(甘油、PEG400、PEG600)时,CPO的血红素辅基暴露程度增加,底物容易接近活性中心,同时CPO的α-螺旋结构得以加强,从而有效提高了产物收率.CPO对底物的手性识别主要基于底物与酶催化中间体([Fe(IV)=O·]+)形成的复合物对酶的稳定性的影响.通过反应条件优化,(R)-环氧氯丙烷产率可达67.3%,对映选择性(ee)97.5%.     

Biocatalytic oxidation of thiophosphoryl compounds: a new chemo-enzymatic approach to enantiomeric insecticidal thionophosphates and their oxons

The biocatalytic oxidation of racemic O-S-dimethyl O-p-nitrophenyl phosphorodithioate 5 catalyzed by chloroperoxidase from Caldariomyces fumago resulted in the formation of the (?)-(S)-enantiomer of the corresponding oxon 4 and unoxidized substrate 5 with a (+)-(R)-configuration. Both compounds were obtained with very high enantiomeric excesses, 99.6% and 97%, respectively. The thionation reaction of the resulting (?)-(S)-oxon 4 with Lawesson’s reagent gave (?)-(S)-phosphorodithioate 5 with full stereoselectivity, while the oxidation of unreacted substrate (+)-(R)-5 with iodoxybenzene afforded oxon (+)-(R)-4 with 94.9% ee.     

Electric dipole polarity of diatomic molecules

The restricted SCF (single-configuration SCF) and MCSCF (multiconfiguration SCF) calculations are performed to compute the ground-state electric dipole moments of four pairs of diatomic molecules—(1) CO and BF; (2) SiO and AlF; (3) CS and BCl; and (4) SiS and AlCl—at a number of internuclear distances on both sides of the equilibrium position. Near Hartree–Fock accuracy is obtained in the SCF calculations. All eight molecules have a range of internuclear distance in which electric dipole moments are of the polarity of A^?B⁺. The shapes of computed electric dipole moment functions are discussed in the language of the molecular orbital method and in relationship to electronegativities of atoms. The present study gives us deeper understanding of electron transfer inside molecules and consequently of the apparent contradiction between electronegativity and the dipole polarity of some molecules. © John Wiley & Sons, Inc.