Phase transfer catalyzed single electron transfer–degenerative chain transfer mediated living radical polymerization (PTC‐SET–DTLRP) of vinyl chloride catalyzed by sodium dithionite and initiated with iodoform in water at 43 °C

To accelerate the living radical polymerization (LRP) of vinyl chloride (VC) in water the phase transfer catalyzed single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of VC mediated by sodium dithionite (Na₂S₂O₄) was investigated. The fastest polymerization reaction that still produces thermally stable poly(vinyl chloride) (PVC) takes place at 43 °C with the ratio [PTC]₀/[Na₂S₂O₄]₀ = 0.0075/1. Cetyltrimethylammonium bromide (nC₁₆H₃₃(CH₃)₃N⁺Br^?, CetMe₃NBr) was the phase‐transfer catalyst (PTC) of choice. Under these conditions the first, fast stage of SET–DTLRP of VC was accomplished within 7–8 h when the initial ratio monomer/initiator [VC]₀/[CHI₃]₀ was 800. The number‐average molecular weight (M_n) of the resulting PVC was in good agreement with the theoretical molecular weight (M_th). When the [VC]₀/[CHI₃]₀ ratio was 4800, the fast step of the reaction was accomplished within 17 h, to produce 72% monomer conversion. A deviation of the M_n from the M_th was observed in this case. Possible mechanistic explanations for this deviation as well as for the phase transfer catalyzed SET–DTLRP of VC were suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 779–788, 2005     

Copolymerization of Allilidene Diacetate with Vinyl Acetate

Abstract

The monomer reactivity ratios for vinyl acetate (VAc)-allilidene diacetate (ADA) copolymerization have never been obtained. The composition of VAc-ADA copolymers was determined by NMR spectroscopy, measuring CH protons corresponding to ADA at 3.1τ and VAc at 5.1τ. The monomer reactivity ratios were evaluated; r₁ = 1.34 ± 0.05 and r₂ = 0.48 ± 0.03, where M₁ = ADA and M₂ = VAc. From these values the Q and e values for ADA were calculated: Q = 0.047 and e = 0.44 by taking Q = 0.026 and e = ?0.22 for VAc. The H value [1] for copolymerization of ADA, VAc, and vinyl chloride (VC) is 0.87.     

Internal Transfer Reactions in the Copolymerization of Vinyl Acetate with Chlorinated Monomers

In the copolymerization of vinyl acetate (A) with either vinyl chloride (C) or vinylidene chloride (V), an internal transfer (backbiting) reaction—of the C- or V-ended radi-cals on an antepenultimate A unit—is proposed to be responsible for the deviation of the copolymerization kinetics from the Lewis and Mayo theory. The deviations disappear if A is replaced by isopropenylacetate [I_p], Then one gets, for the I_p -C copolymerization. r_{I p} =0.35 and :r_c=2.4, and for I -V copolymerization, r_{I p}=0.13 and r_v=5.9. The internal transfer reaction causes the formation of branches which may be evidenced by NMR analysis of constant composition suspension A-C copolymers. A kinetic scheme is proposed and the corresponding reactivity ratios derived r_A=0.29, r_c=1.60, r=0.3 (radical resulting from the transfer reaction), and k_T=1500 (rate constant of the transfer reaction at 50°C). The distribution of branches is calculated together with the sequence distribution functions for the .A. or Cunits.     

Copolymérisation du chlorure de vinyle et de carbonates de vinyle

Bulk copolymerizations of vinyl chloride (VC) and vinyl carbonate monomers were carried out at 50°. For vinyl-phenyl carbonate (CPV), the reactivity ratios are r_CV = 1.6 and r_CPV = 0.3. Slightly but regularly crosslinked copolymers are produced using moderate amount of bisvinylcarbonate; the crosslinking efficiency of the second vinyl function of the comonomer is very high, particularly if the two vinyl functions are linked through a flexible aliphatic moiety. Improved creep resistance is given by a small amount of crosslinking.     

Single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride initiated with methylene iodide and catalyzed by sodium dithionite

Single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) initiated with methylene iodide (CH₂I₂) and catalyzed by sodium dithionite (Na₂S₂O₄) in water at 35 °C produces a telechelic poly(vinyl chloride) (LRP–PVC) with two different active chain ends: ICH ₂ (CH₂CHCl)_n‐1CH₂ CHClI , and 2.0 functionality. The reactivity and initiator efficiency of CH₂I₂ in SET–DTLRP of VC was lower than those of iodoform. A possible mechanism for the CH₂I₂‐initiated SET–DTLRP of VC was suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 773–778, 2005     

Homo‐ and Copolymerization of Phenacyl Methacrylate via the Atom Transfer Radical Polymerization Method

The homo‐ and copolymers via atom transfer radical (co)polymerization (ATRP) of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) and t‐butyl methacrylate (t‐BMA) was performed in bulk at 90°C in the presence of ethyl 2‐bromoacetate, cuprous(I)bromide (CuBr), and 2,2′‐bipyridine. The polymerization of PAMA was carried out at 70, 80, and 100°C. Also, free‐radical polymerization of PAMA was carried out at 60°C. Characterization using FT‐IR and ¹³C‐NMR techniques confirmed the formation of a five‐membered lactone ring through ATRP. The in situ addition of methylmethacrylate to a macroinitiator of poly(phenacyl methacrylate) [Mn=2800, Mw/Mn=1.16] afforded an AB‐type block copolymer [Mn=13600, Mw/Mn=1.46]. When PAMA units increased in the living copolymer system, the Mn values and the polydispersities were decreased (1.1<Mw/Mn<1.79). The monomer reactivity ratios were computed using Kelen‐Tüdös (K‐T), Fineman‐Ross (F‐R) and Tidwell‐Mortimer (T‐M) methods and were found to be r₁= 1.17; r₂= 0.76; r₁=1.16; r₂=0.75 and r₁=1.18; r₂=0.76, respectively (r₁=is monomer reactivity ratio of PAMA). The initial decomposition temperatures of the resulting copolymers were measured by TGA. Blends of poly(PAMA) and poly(MMA) obtained via the ATRP method have been characterized by differential thermal and thermogravimetric analyses.     

Polymerization of vinyl chloride and copolymerization with carbon monoxide by a new initiator

The system comprising the ethoxydized product of triethylaluminum, cuprous chloride, and carbon tetrachloride was used as an initiator for polymerization of vinyl chloride, and the polymerization kinetics was studied. From plots of the molar number of number-average polymer chain Y/P? versus yield Y, the two parameters a ( = ∫ R_idt ? 1/2 ∫ R_tdt) and b ( = ∫ R_trdt/∫ R_pdt) were estimated to be 6 × 10^?3 mole/l. and 6.6 × 10^?4 respectively. Studies of the tacticity of the poly(vinyl chloride) showed isotactic = 49.3% and syndiotactic = 50.7%. The present initiator also permitted copolymerization of vinyl chloride with carbon monoxide; the monomer reactivity ratios were r₁ = 0.40 (vinyl chloride) and r₂ = 0.01 (carbon monoxide).     

From metal‐catalyzed radical telomerization to metal‐catalyzed radical polymerization of vinyl chloride: Toward living radical polymerization of vinyl chloride

The metal‐catalyzed radical polymerization of vinyl chloride (VC) in ortho‐dichlorobenzene initiated with various activated halides, such as α,α‐dihaloalkanes, α,α,α‐trihaloalkanes, perfloroalkyl halides, benzyl halides, pseudohalides, allyl halides, sulfonyl halides, α‐haloesters, α‐halonitriles, and imidyl halides, in the presence of Cu(0)/2,2′‐bipyridine, Fe(0)/o‐phenantroline, TiCp₂Cl₂, and other metal catalysts is reported. The formation of the monoadduct between the initiator and VC was achieved with all catalysts. However, propagation was observed only for metals in their zero oxidation state because they were able to reinitiate from geminal dihalo or allylic chloride structures. Poly(vinyl chloride) with molecular weights larger then the theoretical limit allowed by chain transfer to VC were obtained even at 130 °C. In addition, the most elemental features of a living radical polymerization, such as a linear dependence of the molecular weight and a decrease of polydispersity with conversion, were observed for the most promising systems based on iodine‐containing initiators and Cu(0), that is, I? CH₂? Ph? CH₂? I/Cu(0)/bpy (where bpy = 2,2′‐bipyridyl), at 130 °C. However, because of the formation of inactive species via chain transfer to VC and other side reactions, the observed conversions were in most cases lower than 40%. A mechanistic interpretation of the chain transfer to monomer in the presence of Cu species is proposed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3392–3418, 2001     

Analysis of Vinyl Chloride in Vapor Phase of Mainstream Cigarette Smoke by GC–MS Under ISO and Health Canada Intensive Machine Smoking Regimens

Vinyl chloride (VC) in the vapor phase of mainstream cigarette smoke was determined under both International Organization for Standardization (ISO) and Health Canada intensive (HCI) machine smoking regimens, which was suspected to be carcinogenic compound. VC was collected by passing the mainstream cigarette smoke through a Cambridge Filter Pad (CFP) into cryogenic traps containing methanol. The impinger solutions were fortified with VC-d ₃ and analyzed by GC–MS. Limits of detection for vinyl chloride was 0.9 ng mL⁻¹ with the recovery in the range of 93.2–98.4 %. Moreover, the intra-day and inter-day precision was 7.39 and 9.77 %, respectively. Under HCI machine smoking regimen, the vinyl chloride yields in vapor phase of mainstream cigarette smoke were much higher and the average increase was greater than 100 % compared with those under ISO smoking condition.

     

A Grafting Study on Partially Dehydrochlorinated Poly(vinyl chloride) by Atom Transfer Radical Polymerization

HCl elimination in low ratio was first carried out from poly(vinyl chloride) to increase allylic chlorines. Partially dehydrochlorinated poly(vinyl chloride), having a macroinitiator effect, was grafted with tert‐butyl methacrylate via atom transfer radical polymerization in the presence of CuBr/2,2′‐bipyridine at 64°C in tetrahydrofuran. Original poly(vinyl chloride) was also grafted with tert‐butyl methacrylate under the same conditions to compare with that of partially dehydrochlorinated poly(vinyl chloride). The graft copolymers were characterized by elemental analysis, FTIR, ¹H and ¹³C‐NMR, differential scanning calorimetry, and gel permeation chromatography (GPC). Thermal stabilities of the graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators.     

Acceleration of the single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride in water at 25 °C

The accelerated single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran (THF) at 25 °C is reported. This process is catalyzed by sodium dithionite (Na₂S₂O₄)‐sodium bicarbonate (NaHCO₃). Electron transfer cocatalysts (ETC) 1,1′‐dialkyl‐4,4′‐bipyridinum dihalides or alkyl viologens were also employed in this polymerization. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight (M_n) = 2,000–12,000, no detectable amounts of structural defects, and both active chloroiodomethyl and inactive chloromethyl chain ends. The molecular weight distribution of PVC obtained is M_w/M_n = 1.5. The surface active agents afford the final polymers as a powder and provide an acceleration of the rate of polymerization. The role of ETC is to accelerate the single electron transfer (SET) step, whereas THF enhances the degenerative chain transfer (DT) step. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6364–6374, 2004     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Polymerization of vinyl chloride with half‐titanocene/methylaluminoxane catalysts

The polymerization of vinyl chloride (VC) with half‐titanocene /methylaluminoxane (MAO) catalysts is investigated. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst (Cp* = η⁵‐pentamethylcyclopentadienyl) afforded high‐molecular‐weight poly(vinyl chloride) (PVC) in good yields, although the polymerization proceeded at a slow rate. With the Cp*TiCl₃/MAO catalyst, the polymer was also obtained, but the polymer yield was lower than that with the Cp*Ti(OCH₃)₃/MAO catalyst. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was influenced by the MAO/Ti mole ratio and reaction temperature, and the optimum was observed at the MAO/Ti mole ratio of about 10. The optimum reaction temperature of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was around 20 °C. The stereoregularity of PVC obtained with the Cp*Ti(OCH₃)₃/MAO catalyst was different from that obtained with azobisisobutyronitrile, but highly stereoregular PVC could not be synthesized. From the elemental analyses, the ¹H and ¹³C NMR spectra of the polymers, and the analysis of the reduction product from PVC to polyethylene, the polymer obtained with Cp*Ti(OCH₃)₃/MAO catalyst consisted of only regular head‐to‐tail units without any anomalous structure, whereas the Cp*TiCl₃/MAO catalyst gave the PVC‐bearing anomalous units. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst did not inhibit even in the presence of radical inhibitors such as 2,2,6,6,‐tetrametylpiperidine‐1‐oxyl, indicating that the polymerization of VC did not proceed via a radical mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 248–256, 2003     

Gas chromatographic determination of trace amounts of vinyl chloride and dichloroethenes in landfill-gas

A method for the determination of vinyl chloride (VC) and dichloroethenes (DCE) in gas samples is presented. The analytes are preconcentrated from a gas-volume of up to 20 l on an adsorption tube filled with 1.0 g of a carbon molecular sieve at a flow rate of 80 l/h and are subsequently desorbed with carbon disulfide. Vinyl bromide is added as internal standard to the extract. The analytes are determined as their 1,2-dibromo-derivatives by capillary gas chromatography with electron capture detection. The detection limits have been found to be 82 ng/m³ = 32 ppt (VC), 190 ng/m³ = 48 ppt (1,1-DCE) and 96 ng/m³ = 24 ppt (cis-/trans-1,2-DCE). The method has been used for the quantification of the anaerobic microbial degradation of tetra- (PCE) and trichloroethene (TCE) to dichloroethenes and vinyl chloride in landfill sites. The substances have been analyzed in landfill-gas as well as in gaseous emissions from the landfill surface. The mean emission rates of tetrachloroethene, trichloroethene and vinyl chloride from the landfill surface into the ambient air are about 0.5 g/(m² × h).     

SET‐LRP of vinyl chloride initiated with CHBr3 and catalyzed by Cu(0)‐wire/TREN in DMSO at 25 °C

The single‐electron transfer living radical polymerization (SET‐LRP) of vinyl chloride (VC) initiated with CHBr₃ in dimethylsulfoxide (DMSO) at 25 °C was investigated using Cu(0) powder and Cu(0) wire as the catalyst. It was determined that living kinetics and high conversion are achieved only through the proper calibration of the ratio between Cu(0) and TREN and the concentration of VC in DMSO. For both Cu(0) powder and Cu(0) wire, optimum conversion was achieved with higher levels of TREN than reported in earlier preliminary reports and under more dilute conditions. Using these conditions, 85+% conversion of VC could be achieved with Cu(0) powder and wire to produce white poly(vinyl chloride) (PVC) with M_n = 20,000 and M_w/M_n = 1.4–1.6 in 360 min. The use of Cu(0) wire provides the most effective catalytic system for the LRP of PVC allowing for simple removal and recycling of the catalyst. In the Cu(0) wire‐catalyzed SET‐LRP of VC, the consumption of Cu(0) was monitored as a function of conversion. From these studies, it is evident that the catalyst can be recycled extensively before significant exchange of Cu(0) into Cu(II)X₂ and change in catalyst surface area is observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 164–172, 2010     

Rate constants of the reaction of ozone with trans-1,2-dichloroethene and vinyl chloride in air

Kinetic studies on reactions of ozone with trans-1,2-dichloroethene (DCE) and vinyl chloride (VC) were performed in air. In the presence of scavengers of radicals, such as CH₃CHO, the rates for both reactions are second order (first order in each reactant). Observed rate constants are (1.80 ± 0.29) X 10^?19 cm³/molecule·s for DCE and (2.45 ± 0.45) × 10^?19 cm³/molecule·s for VC. In the presence of CH₃CHO, propene ozonide \documentclass{article}\pagestyle{empty}\begin{document}$ ({\rm CH}_3 \overline {{\rm CHOOCH}_2 {\rm O}}) $\end{document} was observed as a product in the case of VC. Peroxyformic acid (HC)O(OOH) was detected in both reactions. The Criegee mechanism was proposed to play a major role in the reaction of ozone with chloroolefins. The branching ratio of O₃ + CH₂=CHCl → CH₂OO + HCOCl (6a), CHClOO + HCHO (6b) was obtained as 76:24, and the fraction of the stabilized CH₂OO was estimated to be 0.25 of that produced in reaction (6a).     

Radical-type addition of benzyl bromide to vinyl chloride: the kinetics and activation energy of the process

Radical telomerization of vinyl chloride with benzyl bromide and the competitive reaction of benzyl bromide with vinyl chloride and trimethylvinylsilane have been studied. The relative rate constant for the addition of C₆H₅C · H₂ to vinyl chloride,k _rel (with respect to trimethylvinylsilane), is close to unity, whereas the activation energy of the addition of C₆H₅C^.H₂ to vinyl chloride is considerably lower (by 7 kcal mol^–1) than in the reaction involving trimethylvinylsilane. The possible fragmentation of the radical-adduct C₆H₅CH₂CH₂C^.HCl was suggested as one of the possible reasons of underestimation ofk _rel. The activation energy was estimated by the MPDO/3 method.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 886–888, May, 1993.     

Analysis of Vinyl Chloride in Vapor Phase of Mainstream Cigarette Smoke by GC–MS Under ISO and Health Canada Intensive Machine Smoking Regimens

Vinyl chloride (VC) in the vapor phase of mainstream cigarette smoke was determined under both International Organization for Standardization (ISO) and Health Canada intensive (HCI) machine smoking regimens, which was suspected to be carcinogenic compound. VC was collected by passing the mainstream cigarette smoke through a Cambridge Filter Pad (CFP) into cryogenic traps containing methanol. The impinger solutions were fortified with VC-d ₃ and analyzed by GC–MS. Limits of detection for vinyl chloride was 0.9 ng mL^?1 with the recovery in the range of 93.2–98.4 %. Moreover, the intra-day and inter-day precision was 7.39 and 9.77 %, respectively. Under HCI machine smoking regimen, the vinyl chloride yields in vapor phase of mainstream cigarette smoke were much higher and the average increase was greater than 100 % compared with those under ISO smoking condition.     

Mixing Behavior of Conventional and Gemini Cationic Surfactants

Micellization behavior of cationic monomeric surfactants, hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), tetradecyltrimethylammonium bromide (TTAB), and dimeric (gemini) cationic surfactant pentamethylene‐1, 5‐bis(hexadecyldimethylammonium bromide) with formula C₁₆H₃₃(CH₃)₂N⁺(CH₂)₅N⁺(CH₃)₂C₁₆H₃₃ · 2Br^?, abbreviated as 16‐5‐16, in mixed states (binary) have been studied by conductivity. The micellar compositions, activities of the components, and their mutual interactions have been estimated from Rubingh's theory. The mixtures show nonideal behavior with favorable interactions.     

Copolymers of 4‐(3′,4′‐Dimethoxycinnamoyl)phenyl Acrylate and MMA: Synthesis,Characterization, Photocrosslinking Properties,and Monomer Reactivity Ratios

Abstract

4‐(3′,4′‐Dimethoxycinnamoyl)phenyl acrylate (DMCPA) containing pendant chalcone moiety was copolymerized with methyl methacrylate (MMA) by radical polymerization in ethyl methyl ketone at 70°C under a nitrogen atmosphere using benzoyl peroxide (BPO) as a free radical initiator. The prepared polymer was characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The composition of the copolymer was determined using ¹H‐NMR analysis. The monomer reactivity ratios of copolymerization were determined using conventional linearization methods such as Fineman–Ross (r ₁ = 0.26 and r ₂ = 0.61), Kelen–Tudos (r ₁ = 0.26 and r ₂ = 0.61), and Ext. Kelen–Tudos (r ₁ = 0.23 and r ₂ = 0.59), and a non‐linear error‐in‐variables model (EVM) method using the computer program RREVM (r ₁ = 0.2541 and r ₂ = 0.6094). The molecular weights (M _w and M _n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers in air reveals that the stability of the copolymers decreases with an increase in the mole fraction of MMA in the copolymers. The solubility of the polymers was tested in various polar and non‐polar solvents. The glass transition temperature of the copolymers was determined as a function of copolymer composition. The copolymers were sensitive to UV light and became crosslinked after irradiation with 254 nm light.