A Complex between C-Methylcalix[4]resorcinarene and Triethylammonium Nitrate

Abstract

The synthesis and crystal structure of the complex formed by the all-cis epimer of C-methylcalix[4]resorcinarene (1) and triethylammonium nitrate are reported. “1.(HNEt⁺ ₃)₄. (NO^? ₃)₄(2)”, crystallizes in the monoclinic space group P2₁/n, a=25.796(2), b=16.6048(11), c=29.5659(10) Å, β=94.636(4)°, V=12623(2) ų, Z=8. Refinement led to a final conventional R₁ value of 0.128 for 12428 reflections and 1473 parameters. The resorcinarene displays the usual bowl-type shape, with four hydroxyl protons involved in intramolecular hydrogen bonds, whereas the remaining four make hydrogen bonds with four bridging nitrate ions, which results in the formation of infinite chains. Those chains are arranged so as to form layers, between which the triethylammonium ions and the remaining nitrate ions are hydrogen-bonded one to another.     

Synthesis of Calix[4]resorcinarene Amide Derivatives

Three different synthetic routes were developed to introduce carbamoyloxy functional groups at the upper periphery of two calix[4]resorcinarenes. By treating activated esters 2a-b with excess corresponding amine such as 3-(dimethylamino)propylamine 3, ct-phenethylamine 4 and triethylenetetramine 5, six amide derivatives 6a-8b were obtained in high yield (Route 1). The pyridine-linked amide derivatives 9a-b were prepared by using acid chloride intermediate (Route 2).The amide derivatives 10a-b were obtained in moderate yields by direct alkylation of phenolic hydroxyl groups of la-b with N,N-dipropylchloroacetoamide in the presence of K2CO3/KI in acetone (Route 3).     

Synthesis of Calix[4]resorcinarene Schiff Bases

Introduction Calix[4]resorcinarenes are cyclic tetramers in which four resorcinol units are linked via alkylmethylene bridges in the o-position to each resorcinic hydroxyl group[1]. Their structures resemble that of p-butylcalix[n]arenes and render them of interest as host compounds in many contemporary fields of supramolecular chemistry.     

Thermal analysis of calix[4]resorcinarene complexes with secondary and tertiary amines

Tetra-n-undecylcalix[4]resorcinarene forms solid adducts with secondary and tertiary amines. Thermal decomposition of these complexes was investigated by means of thermogravimetry (TG) and differential scanning calorimetry (DSC). It was found that deamination of complexes occurs as multi-step process. The stoichiometry of complexes was evaluated on the basis of TG studies and total heats of deamination were calculated from DSC measurements.Presented at the CCTA9 31.08-05.09 2003, Zakopane PolandThis work was supported by Grant No. 3T09A 02419 from The Polish Committee for Scientific Research. The authors thank to prof. W. Zielenkiewicz for helpful discussion during realisation of this project and prof. T. Borowiak for X-ray structure of the tetra-n-undecylcalix[4]resorcinarene. tetra-n-undecylcalix[4]resorcinarene.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Synthesis of Calix [4] resorcinarene Core Dendrimers with Peripheral Salicylideneimine Functional Groups

IntroductionOver the past two decades, dendrimers have at-tracted considerable attention because of their inherentnovel structural features and their potential applicationsin various scientific and industrial fields such as cataly-sis or newmaterials, and…     

Phosphorylation of oxyethylated resorcinol and calix[4]resorcinarene with P(III) acid amides

Abstract

Phosphorylation of 1,3-bis(2-hydroxyethoxy)benzene and octa(2-hydroxyethyl) calix[4]-resorcinarenes with P(III) acid amides and chloramides has been studied. It has been determined that the nature of phosphorous acid amides affects significantly the synthetic result of the reaction.     

Interaction of monolayers of calix[4]resorcinarene derivatives with copper ions in the aqueous subphase

Stable monolayers of novel amphiphilic calix[4]resorcinarene derivates at the air–water interface were prepared. Their interactions with copper ions from the aqueous subphase were investigated by measuring surface pressure–area and surface potential–area isotherms, as well as by Brewster angle microscopy. Theoretical aspects of interpreting the dependence of the surface pressure on the bulk copper ions concentration were discussed. The interaction of copper ions with calix[4]resorcinarene derivates was interpreted in terms of Gibbs–Shishkovsky adsorption equation.     

丙醛间苯二酚杯[4]芳烃烷基化衍生物的合成

以间苯二酚和丙醛为原料合成了丙醛杯[4]芳烃(1),1经不同的烷基化反应合成了新的丙醛杯[4]芳烃烷基化衍生物,其结构经1H NMR和IR表征。     

Effect of C-Tetramethyl Calix[4]resorcinarene Acrylate on Curing Behavior and Film Properties of Thiol-acrylate Coating System

An octa-functional acrylate of C-tetramethyl calix[4]resorcinarene(CMC-4-RA) was facilely synthesized and characterized with 1H NMR, 13C NMR and FTIR spectroscopy. The CMC-4-RA was added to a thiol-acrylate system with different mass ratios, and exposed to a middle pressure mercury lamp. The maximum photopolymerization rate and final vinyl group conversion in the cured film increased greatly along with CMC-4-RA addition that was monitored with Photo-DSC. The tensile strength and pendulum hardness were impro...     

Molecular octopus: octa functionalized calix[4]resorcinarene-hydroxamic acid [C4RAHA] for selective extraction, separation and preconcentration of U(VI)

A solvent extraction separation of uranium, in the presence of thorium, cerium and lanthanides with a new calix[4]resorcinarene bearing eight hydroxamic acid groups (C4RAHA) is described. Quantitative extraction of uranium is possible in ethyl acetate solution of C4RAHA at pH 8.0. The lambda(max) and molar absorptivity (varepsilon) for uranium is 356nm and 8352Lmol(-1)cm(-1). The Binding ratio of uranium with C4RAHA as evaluated by Job's method is 4:1. The system obeys Beer's law over the range 0.075-6.0mugml(-1) of uranium with Sandell sensitivity 0.0284mugcm(-2). A preconcentration factor of 142 was achieved by directly aspirating the extract for GF-AAS measurements. The two-phase stability constant evaluated at 25 degrees C for uranium is 15.91. The complexation is characterized by favorable enthalpy and entropy changes. A liquid membrane transport study of uranium was carried out from source to the receiving phase under controlled conditions and a mechanism of transport is proposed. Uranium has been determined in standard and environmental samples.     

Thermochemical Investigation of Some Selected Solvates of Calix[4]resorcinarene

Lipophilic calix[4]resorcinarene derived from lauryl aldehyde forms stable crystalline solvates with a range of organic solvents: acetone, 1,4-dioxane, methylethylvketone, dimethylformamide, dimethylacetamide, N-methylpyrrolidinone, butyronitrile, methanol, 1,2-dimethoxybenzene and acetonitrile. The composition and thermal stability of these solvates was followed by thermogravimetric method, indicating a stoichiometry ranging from 1 to 3 (calixresorcinarene/solvent). The activation energy was evaluated for the selected solvates. Molecular modelling, using Hyperchem 5.0 software, was applied to the selected solvates. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and Crystal Structure of Complex of Sodium Perrhenate with Tetraethyl p-tert-Butylcalix[4]arene Tetraacetate

Recently,theconformationofthecalixarenehasbeenshowntobeimportantincontrollingtheseIectivityofthereceptor.Forexample,sodiumioncouldbeboundverystronglybyesterderivativesofcalix[4]areneintheconeconformationl.Wehavefoundthatinthepresenceofcertainamountofsodiumion,microamountofReO4-canbequantitativelyextractedintol,2-dichloroethanebytheligandtetraethylp-tert-butylcalix[4]arenetetraacetate(L).ItshowsthatthepresenceofNa inaqueoussolutioncanpromotetheformationofhydrophobiccomplex[NaL] .ReO'-whichc…     

Hydrophosphinoyl derivatives of calix[4]resorcinarenes

Calix[4]resorcinarene reacts with N,N,N",N"-tetraethyl-P-ethylphosphonous diamide to give dioxaphosphocines, whose hydrolysis with intracavity water yields phosphinoyl derivative of calix[4]resorcinarene.     

新型正丁醛杯[4]芳烃醚衍生物的合成

以正丁醛间苯二酚杯[4]芳烃为原料,经酯化、水解、酰氯化后再与9-蒽甲醇反应,合成了蒽单取代的正丁醛间苯二酚型杯[4]芳烃醚衍生物。其结构经1H NMR和IR表征。     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

间苯二酚杯芳烃树枝醇类化合物的合成

用间苯二酚杯芳烃的氧代乙酸乙酯类衍生物1a～1b分别与三羟甲基甲胺和二乙醇胺在乙醇/甲苯中进行酰胺化反应, 合成了四种新型的间苯二酚杯芳烃树枝醇化合物2a～2d, 树枝醇2a～2d外缘的羟基用乙酸酐酯化, 得到全乙酰基衍生物3a～3d. 化合物结构都用¹H NMR, IR和元素分析等方法进行了表征, 对树枝醇化合物的聚集状态进行了光学显微镜观察.     

Structural Study of C-undecylcalix[4]resorcinarene Solvate with Dioxane

The crystal structure of the molecular complex of C-undecylcalix[4]resorcinarene with dioxane has been determined by X-ray analysis. The asymmetric unit contains one host and four guest molecules. The calix[4]resorcinarene moiety adopts a bowl conformation with C_4v symmetry. Four undecyl chains are axially oriented. Calix molecules are packed in a bowl-to-bowl fashion with alternating hydrophilic and hydrophobic layers. One of the hydrophilic dioxane molecules is located at the rim of the calix moiety and is hydrogen bonded to the other one. There is no interaction to attract, or direct the dioxane molecule into the interior of the cavity. There is an exo complex formed. The dioxane molecules – located in the hydrophobic part – are highly disordered.