Fabrication of Nanocomposite Containing Naphthoquinone and Nanogold Supported on Poly(2,6‐pyridinedicarboxylic acid) Film for Voltammetric Determination of N‐Acetyl‐L‐Cysteine

A modified electrode was fabricated by grafting of poly (2,6‐pyridinedicarboxylic acid) film (PDC) by electropolymerization of 2,6‐pyridinedicarboxylic acid on the glassy carbon electrode (GCE). Then, gold nanoparticles (NG) and 1,2‐naphthoquinone‐4‐sulfonic acid sodium (Nq) were immobilized on the PDC/GCE to prepare Nq/NG/PDC/GCE by immersing electrode into NG and Nq solution, respectively. The Nq species on NG/PDC/GCE could catalyze electrooxidation of N‐acetyl‐L ‐cysteine (NAC) with lowering the over potential by about 600 mV. This method used for detection of NAC in dynamic range from 4.0×10^?6 M to 1.30×10^?4 M with a detection of limit (2σ) 8.0×10^?7 M.     

Effects of different acid functional groups on proton conductivity of polymer‐1,2,4‐triazole blends

Proton transfer reactions under anhydrous conditions have attracted remarkable interest due to chemical energy conversions in polymer electrolyte membrane fuel cells. In this work, 1H‐1,2,4‐triazole (Tri) was used as a proton solvent in different polymer host matrices such as Poly(vinylphosphonic acid) (PVPA), and poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) (PAMPS). PVPATri_x and PAMPSTri_x electrolytes were investigated where x is the molar ratio of Tri to corresponding polymer repeat unit. The interaction between polymer and Tri was studied via FTIR spectroscopy. Thermogravimetry analysis and differential scanning calorimetry were employed to examine the thermal stability and homogeneity of the materials, respectively. PVPATri_1.5 showed a maximum water‐free proton conductivity of 2.3 × 10^?3 S/cm at 120 °C and that of PAMPSTri₂ was 9.3 × 10^?4 S/cm at 140 °C. The results were interpreted in terms of different acidic functional groups and composition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3315–3322, 2006     

Selective detection of dopamine with poly(diphenylamine sulfonic acid) modified electrode in the presence of ascorbic acid

A glassy carbon electrode was modified with electropolymerized film of diphenylamine sulfonic acid (DPASA). Electropolymerization was performed by cyclic voltammetry in 0.1 M KCl solution. The modified electrode showed an excellent electrocatalytic effect towards oxidation of dopamine (DA) and ascorbic acid (AA). Electrostatic interaction between the negatively charged poly(DPASA) film and either cationic DA species or anionic AA species favorably contributed to the redox response of DA and AA. Anodic peaks of DA and AA in their mixture were well separated by ca 168 and −11.8 mV. The proposed modified electrode was utilized for selective determination of dopamine in the concentration range of 5.0 × 10^t7–2.0 × 10⁻⁵ M in the presence of high concentration of ascorbic acid. Detection limit was 6.5 × 10⁻⁹ M.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.     

Homooxacalix[3]arene Derivatives as Ionophores for Serotonin‐Selective Membrane Electrodes

Homooxacalix[3]arene derivatives are effective ionophores for constructing serotonin‐selective membrane electrodes. An electrode based on one of the derivatives, tris(methoxyphenylpropyloxy)hexahomooxacalix[3]arene‐triethyl ether, with potassium tetrakis(p‐chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2‐ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed much better selectivity for serotonin than for various organic ammonium ions and inorganic cations. The electrode exhibited a near‐Nernstian response to serotonin in the concentration range of 2×10^?4 to 1×10^?2 M with a slope of 56.4 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM Na₂HPO₄/NaH₂PO₄ (pH 7.4). The limit of the detection was 8×10^?5 M. The selectivity pattern of this electrode was quite different from that of an electrode using calix[6]arene‐hexaacetic acid hexaethyl ester, a well‐known ionophore for primary organic ammonium ions, which did not induce an enhanced response to serotonin. The developed electrode was used for the active loading of serotonin in liposomes induced by transmembrane pH gradients.     

Probing the effects of external species on poly(acrylate acid) chain dynamics by using cationic AIE-active fluorophore

We report here our results on the investigation of the chain dynamics of poly(acrylic acid) in aqueous solution. The concentration of poly(acrylic acid) was approximately 3.8×10~(-4) mol/L, two orders of magnitude higher than that reported in the literature. The p H value of the solution was 3.9, and the hydrogen bonds between the intrinsic and ionized carboxylic acid groups formed dynamic networks, which captured aggregation-induced emission-active molecules(a tetra-quaternary ammonium modified tetraphenylethene derivative) inside the polymer coils and induced fluorescence emission. The hydrogen bonds can be classified as intra- or intermolecular; both can be probed based on the emission change of the tetra-quaternary ammonium modified tetraphenylethene probes. The effects of different external stimuli on the polymer chain dynamics were investigated using different metal cations(including Na~+, Li~+, Zn~(2+), Ni~(2+), Ca~(2+), and Co~(2+)), different cation concentrations(1×10~(-6) to 4×10~(-4) mol/L), different poly(acrylic acid) molecular weights(5, 240, and 450 k Da), and different copolymers. The experimental results indicate that the long poly(acrylic acid) chains(high molecular weight) tend to form dense globular coils and exclude the probe molecules outside, which are robust and unsusceptible to water-soluble metal cations. However, the shorter poly(acrylic acid) chains tend to form intermolecular hydrogen bonds, which are helpful in capturing more probe molecules inside the networks, thus inducing stronger emission. Because of the dual functions of forming hydrogen bonds with carboxylic groups and acting as an acceptor of protons from the carboxylic acid group to form cationic species, copolymerization with acrylate amide [poly(acrylic acid)-co-poly(acrylamide)] can greatly affect the chain dynamics of poly(acrylic acid) segments, which is reflected by the drastically decreased emission intensity from the fluorescent probes.     

Micelles with highly branched nanoporous interior: Solution properties and binding capabilities of amphiphilic copolymers with linear dendritic architecture

This article describes the solution behavior of model amphiphilic linear‐dendritic ABA block copolymers that self‐assemble in aqueous media and form micelles with highly branched nanoporous cores. The materials investigated are constructed of poly(ethylene glycol), PEG, with molecular weight 5,000 or 11,000 as the water‐soluble B block and poly(benzyl ether) monodendrons [G] of second and third generation as the hydrophobic A fragments. The process of self‐assembly in aqueous media and the character of the micellar core are investigated by fluorescence spectroscopy using pyrene as the molecular probe. The data obtained by different methods indicate that the critical micelle concentrations (cmc) for these systems are between 1.1 × 10⁻⁵ and 2.0 × 10⁻⁵ mol/L for [G‐2]‐PEG5000‐[G‐2] and between 7.08 × 10⁻⁶ and 7.94 × 10⁻⁶ mol/L for [G‐3]‐PEG11000‐[G‐3]. It is found that the ratio of the first and third vibronic bands (I₁/I₃ ) in the fluorescence spectrum of the encapsulated pyrene changes from 1.77 to 1.32 when the concentration of [G‐2]‐PEG5000‐[G‐2] increases from 1.1 × 10⁻⁶ mol/L to 1.1 × 10⁻⁴ mol/L. For [G‐3]‐PEG11000‐[G‐3] these changes are between 1.77 and 1.17 in the same concentration range. The hybrid copolymers form host‐guest complexes with several polyaromatic compounds (phenanthrene, pyrene, perylene and fullerene, C₆₀) that are stable over extended periods of time (more than 12 months). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2711–2727, 2000     

Fluorescent and Electrochemical Sensing of Polyphosphate Nucleotides by Ferrocene Functionalised with Two ZnII(TACN)(pyrene) Complexes

The [Fc? bis{Zn^II(TACN)(Py)}] complex, comprising two Zn^II(TACN) ligands (Fc=ferrocene; Py=pyrene; TACN=1,4,7‐triazacyclononane) bearing fluorescent pyrene chromophores linked by an electrochemically active ferrocene molecule has been synthesised in high yield through a multistep procedure. In the absence of the polyphosphate guest molecules, very weak excimer emission was observed, indicating that the two pyrene‐bearing Zn^II(TACN) units are arranged in a trans‐like configuration with respect to the ferrocene bridging unit. Binding of a variety of polyphosphate anionic guests (PPi and nucleotides di‐ and triphosphate) promotes the interaction between pyrene units and results in an enhancement in excimer emission. Investigations of phosphate binding by ³¹P NMR spectroscopy, fluorescence and electrochemical techniques confirmed a 1:1 stoichiometry for the binding of PPi and nucleotide polyphosphate anions to the bis(Zn^II(TACN)) moiety of [Fc? bis{Zn^II(TACN)(Py)}] and indicated that binding induces a trans to cis configuration rearrangement of the bis(Zn^II(TACN)) complexes that is responsible for the enhancement of the pyrene excimer emission. Pyrophosphate was concluded to have the strongest affinity to [Fc? bis{Zn^II(TACN)(Py)}] among the anions tested based on a six‐fold fluorescence enhancement and 0.1 V negative shift in the potential of the ferrocene/ferrocenium couple. The binding constant for a variety of polyphosphate anions was determined from the change in the intensity of pyrene excimer emission with polyphosphate concentration, measured at 475 nm in CH₃CN/Tris‐HCl (1:9) buffer solution (10.0 mM , pH 7.4). These measurements confirmed that pyrophosphate binds more strongly (K_b=(4.45±0.41)×10⁶ M ^?1) than the other nucleotide di‐ and triphosphates (K_b=1–50×10⁵ M ^?1) tested.     

Mobility-sensitive fluorescence probes for quantitative monitoring of water sorption and diffusion in polymer coatings

The fluorescent molecular rotor probes 4-tricyanovinyl-[N-(2-hydroxyethyl)-N-ethyl]-aniline, tricyano-4-(dimethylamino) benzylidene, and tricyanovinyljulolidene have been used as extrinsic fluorescence probes for quantitative monitoring of water uptake in polymeric coatings. The presence of water causes plasticization of the polymer, which results in increased local mobility within the film. The nonradiative decay pathways of the rotor probes are increased as local mobility increases, and the resulting decrease in fluorescence intensity of the probes is directly proportional to the amount of water sorbed. Beyond allowing for the characterization of sorbent content, this fluorescence technique can be used to determine the diffusion coefficient of water in a polymer film. The relative change in fluorescence fits well to a Fickian diffusion model, yielding a diffusion coefficient for water of 3 × 10^-8 cm²/s in poly(vinyl acetate), and a value of 6 × 10^-9 cm²/s in a room-temperature cured epoxypolyamide, in excellent agreement with diffusion coefficient values determined from gravimetric analysis. Preliminary studies also demonstrate the utility of molecular rotor probes to monitor water uptake in individual layers of multilayered polymer systems. © 1995 John Wiley & Sons, Inc.     

Sensitive Determination of Clomipramine at Poly‐ABSA/Pt Nano‐Clusters Modified Glassy Carbon Electrode

Abstract

Clomipramine, an important tricylic antidepressant drug with low redox activity, was effectively electrocatalyzed on poly‐aminobenzene sulfonic acid/Pt nano‐clusters modified glassy carbon electrode (i.e., poly‐ABSA/Pt/GCE) and generated a sensitive anodic peak at about 0.80 V in pH 8.1 PBS. ABSA was electropolymerized on the surface of GCE modified with Pt nano‐clusters. Pt nanoparticles provide a 3 D and conductive structure for the polymer immobilization. The resulting sensor exhibited a considerable enhancement in voltammetric response characteristics: extending the linear range and lowering the detection limit. The anodic peak current of clomipramine was linear with its concentration over two concentration intervals, viz., 1.0×10^?7～4.0×10^?6 M and 4.0×10^?6～4.0×10^?5 M, with the detection limit of 1.0×10^?9 M (S/N=3). This method was successfully applied to the determination of clomipramine in drug tablets and proved to be reliable compared with UV.     

Utilization of a spiropyran derivative in a polymeric film optode for selective fluorescent sensing of zinc ion

Spiropyrans are the most studied families of func- tional materials due to their reversible structural con- version in response to external optical, chemical, and thermal stimulation[1]. Irradiation with ultraviolet light causes formation of an extended π-conjugation open form (merocyanine form) by heterolytic cleavage of the C (spiro)-O bond, which generates an intense ab- sorption in the visible region. Under the irradiating of visible light, the opened form will come back to the closed spi…     

Fe(III) Ion‐Selective Membrane Electrode Based on 4‐Amino‐6‐methyl‐3‐methylmercapto‐1,2,4‐triazin‐5‐one

Abstract

An original highly selective and sensitive PVC membrane sensor, working as a Fe(III) ion selective electrode and using 4‐amino‐6‐methyl‐3‐methylmercapto‐1,2,4‐triazin‐5‐one (AMMTO) as an ionophore, has been developed. This cetain sensor demonstrated the following performance; a linear dynamic range between 1.0×10^?6 and 1.0×10^?1 M with a near Nernstian slope of 19.4±0.5 mV per decade; a detection limit of 6.8×10^?7 M; characteristically, the best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 65.5% nitrophenyl octyl ether, 2% sodium tetraphenyl borate and 2.5% AMMTO. Furthermore, the potentiometric response of the developed electrode is independent of the solution pH in the range of 2.2–4.8. The sensor possesses the advantages of short conditioning time, fast response time (<15 s) and, especially, great selectivity towards transition and heavy metal ions and some mono, di‐ and trivalent cations. The electrode can be used for at least 9 weeks without any considerable potential divergence. It was effectively used as an indicator electrode in the potentiometric titration of Fe(III) ions with EDTA and the direct determination of Fe³⁺ in different water samples.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Poly(fluorenevinylene) derivatives by Heck coupling: Synthesis,photophysics, and electroluminescence

Three new poly(fluorenevinylene) derivatives were synthesized, characterized, and used as emissive materials in light‐emitting diodes (LEDs). They were synthesized by Heck coupling of 9,9‐dihexyl‐2,7‐divinylfluorene with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,3‐bis(4‐bromophenyl)quinoxaline, or 2,5‐bis(4‐bromophenyl)‐3,4‐diphenylthiophene to afford the polymers F , Q , and T , respectively. Polymers F and Q had medium number–average molecular weights (M_n ? 14,000) with relatively narrow polydispersity (1.3–1.6), while T was obtained as an oligomer (M_n ? 4000). All polymers were soluble in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. They emitted blue‐greenish fluorescence light in dilute THF solution (444–491 nm), with photoluminescence (PL) quantum yields of 0.32–0.54, and in thin film (453–488 nm). LEDs with the configuration of ITO/PEDOT‐PSS/Polymer/Li:Al were fabricated and evaluated. The electroluminescence (EL) spectra of the Q and F polymers were very broad covering the blue–green–red region, whereas the spectrum of the polymer T was almost purely blue. The threshold electrical field for light emission of the devices was almost the same (?1.75 MV/cm). The external quantum efficiency of the devices of polymers Q and F was about 1.0 × 10^?3%, whereas that of polymer T was ?3.0 × 10^?5%. The fluorescence lifetime of polymers F and Q was significantly longer than that of the polymer T . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4494–4507, 2006     

Physicochemical characterization of self-assembled poly(∈-caprolactone) grafted dextran nanoparticles

Amphiphilic graft copolymer composed of poly(∈-caprolactone) and dextran was synthesized by ring opening polymerization of ∈-caprolactone initiated through the hydroxyl end of dextran in the presence of stannous 2-ethylhexanoate [Sn (oct)₂] as a catalyst. It has been widely characterized by Fourier transform infrared spectroscopy, ¹H NMR, and thermogravimetric analysis. Nanoparticles were prepared in aqueous medium by co-solvent evaporation technique at room temperature (25 °C). Hydrodynamic diameter and particle size were measured by dynamic light scattering spectroscopy and atomic force microscopy, respectively. Core-shell geometry of polymeric nanoparticle was characterized by fluorescence spectrophotometer using pyrene as a probe. Critical micelle concentration of polymer in triple distilled water decreased from 6.9 × 10⁻⁴ to 8.9 × 10⁻⁴ g/l with increasing hydrophobic moiety. Further, the physiological stability of the nanoparticles in phosphate buffer saline of pH 7.4 at 37 °C was evaluated, which showed promising in drug delivery system.     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Novel Metronidazole Membrane Sensor Based on a 2,6‐(p‐N,N‐Dimethylaminophenyl)‐4‐Phenylthiopyrylium Perchlorate

A novel PVC‐based membrane sensor based on 2,6‐(p‐N,N‐dimethylaminophenyl)‐4‐phenylthiopyrylium perchlorate (DAPP) is described. The electrode exhibits a sub‐Nernstian response to 1‐(beta‐hydroxyethyl)‐2‐methyl‐5‐nitroimidazole (metronidazol) over a relatively wide concentration range (1.0 × 10^?1 to 1.0 × 10^?5 M) with a detection limit of 8.0 × 10^?6 M. The best performance was obtained with the membrane containing 30% poly (vinyl chloride), 50% dibutyl phthalate, 7% DAPP and 13% oleic acid. It has a fast response time (< 30 s) and can be used for at least four weeks without any major deviation. The proposed sensor revealed very good selectivity for metronidazole over a wide variety of common cations, anions and amino acids and could be used in the pH range of 6.0–7.5. It was successfully used for direct determination of metronidazole in an oral synthetic antiprotozoal as an antibacterial agent, in metronidazole tablets, and metronidazole injections and metronidazole gels.     

Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water‐soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms

The interaction of Cu²⁺ ions with the homopolymer poly(styrene sulfonic acid) (PSSH), as well as with the copolymers of maleic acid (MAc) with styrene sulfonic acid (SSH) or vinyl acetate (VAc), was investigated in dilute aqueous solution through turbidimetry, potentiometry, viscometry, and spectrophotometry in the visible region. Cu²⁺ ions were introduced either through neutralization with Cu(OH)₂ of the acid form of the (co)polymers (PSSH, P(SSH‐co‐MAc) and P(VAc‐co‐MAc)) or through mixing of the sodium salt form of the (co)polymers (PSSNa, P(SSNa‐co‐MANa) and P(VAc‐co‐MANa)) with CuSO₄. Turbidimetry, potentiometry, and spectrophotometry revealed that the first carboxylic group of MAc or both carboxylate groups of MANa are involved in the complexation with Cu²⁺ ions when neutralization with Cu(OH)₂ or mixing with CuSO₄ are applied, respectively. The increased values of the reduced viscosity observed mainly at the first stages of neutralization of P(VAc‐co‐MAc) with Cu(OH)₂ indicate that interchain polymer‐Cu²⁺ complexation takes possibly place. Finally, the spectrophotometric behavior observed upon neutralization of P(SSH‐co‐MAc) with Cu(OH)₂ or mixing of P(SSNa‐co‐MANa) with CuSO₄ revealed that the strength of counterion binding by the sulfonate groups is, in fact, comparable with the complexation of Cu²⁺ ions with the carboxylate groups of MAc. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1149–1158, 2008     

Electrocatalytic Oxidation of Acyclovir on Poly(p‐Aminobenzene Sulfonic Acid) Film Modified Glassy Carbon Electrode

Acyclovir is an antiviral effective drug active compound. A glassy carbon electrode (GCE) was modified with an electropolymerized film of p‐aminobenzene sulfonic acid (p‐ABSA) in phosphate buffer solution (PBS). The polymer film‐modified electrode was used to electrochemically detect acyclovir. Polymer film showed excellent electrocatalytic activity for the oxidation of acyclovir. The anodic peak potential value of the acyclovir at the poly(p‐ABSA) modified glassy carbon electrode was 950 mV obtained by DPV. A linear calibration curve for DPV analysis was constructed in the acyclovir concentration range 2×10^?7–9×10^?6 mol L^?1. Limit of detection (LOD) and limit of quantification (LOQ) were obtained as 5.57×10^?8 and 1.85×10^?7 mol L^?1 respectively. The proposed method exhibits good recovery and reproducibility.