Procyanidin B3 synthesis: a study of leaving group and Lewis acid activator effects upon interflavan bond formation

A range of electrophilic ethers were prepared via DDQ oxidation and alcoholic trapping (propanol, crotyl alcohol and propargyl alcohol) at the C4 position of (+)-catechin. The Lewis acid-mediated C4-substitution of each of these ethers was examined and it was found that the propargyl ether was the best overall electrophile. A range of Lewis acids were then examined as activators and it was found that BF₃·OEt₂ was the best in terms of both yield and stereochemical control at the C4 position. This newly developed set of conditions was then used to prepare the natural product nutraceutical procyanidin B3 with complete control of stereochemistry.     

Synthesis and structure of some substituted 2-amino-4-aryl-7-propargyloxy-4H-chromene-3-carbonitriles

A series of 2-amino-7-hydroxy-4H-chromene-3-carbonitriles 4a–l were synthesized through three-component reaction using sodium carbonate as a catalyst. The reaction was carried out in 96% ethanol-water medium (1:20 ratio in volume). Propargyl ether compounds 5a–l of these chromene-3-carbonitriles were successfully synthesized from corresponding hydroxyl chromene derivatives by reaction with propargyl bromide. Two different procedures were applied in this process: the procedure that used potassium carbonate in dried acetone and the procedure that used sodium hydride in dried DMF. The latter gave the ethers 5a–l in higher yields. The single-crystal X-ray structure of propargyl ether 5g has been recorded.     

Synthesis and Properties of Poly(Phenyl Propargyl Ether) and Its Homologues

Abstract

Various para-substituted phenyl propargyl ethers (substitutent = H, OMe, and CN) were synthesized and polymerized by transition metal catalyst systems including MoCl₅, WC1₆, and PdCl₂. The catalytic activity of MoCl₅-based catalysts was greater than that of WCl₆-based catalysts for the present polymerization. The polymer yield increased in the following order: H > OMe > CN, according to substitutents. The [poly-(pheny] propargyl ether) [poly(PPE)] and poly(methoxy phenyl propargyl ether) [poly(OMe-PPE)] obtained are completely soluble in various organic solvents such as chloroform, methylene chloride, THF, and 1,4-dioxane. However, poly(cyanophenyl propargyl ether) [poly(CN-PPE)] is partially soluble in various organic solvents such as those mentioned above. The electrical conductivities of the undoped and iodine-doped polymers and found to be about 10^?13 and 10^?4-10^?5 S/cm, respectively. The solubilities, thermal properties, and morphologies of the resulting polymers were also studied.     

α-(Benzotriazol-1-YL)Propargyl Ethyl Ethers: Novel Precursors to Enediynes,Enynes and Dienynes

Deprotonated 1-(benzotriazol-1-yl)propargyl ethyl ethers react with propargyl, allyl and alkyl bromides to give the expected substituted derivatives 2, 4 and 9, respectively. Subsequent eliminations of the benzotriazolyl group upon treatment with NaH or ZnBr₂, and elaboration of the acetylene group, generate ethoxy substituted enediynes 3, 6, 8, dienynes 7 and enynes 12. Grignard reagents or LiAlH₄ convert 9 into α-ethoxy substituted alkynes 10 and 11.     

3-Alkyl-1-benzoxepin-5-on-Derivate und 2-Alkyl-1, 4-naphthochinone aus 2-Acylaryl-propargyläthern

3-Alkyl-1-benzoxepin-5-one derivatives and 2-alkyl-1,4-naphtoquinones from 2-acylaryl propargyl ethers. It was found that 3-alkyl-1-benzoxepin-5(2H)-ones of type B can be synthesized by treating 2-acylaryl propargyl ethers of type A with sodium methylsulfinyl methide (NaMSM, dimesyl sodium) (Scheme 13). Oxepinone derivatives of type B undergo ring contraction with base (also NaMSM) to yield the quinol derivatives C which, oxidize (during work-up), if R² = H, to the 1,4-naphthoquinones D (Scheme 13). The propargyl ethers used are listed in Scheme 1. The naphthalene derivatives 1 and 3 give oxepinones (E- 9 and a mixture of 14/15 respectively), whereas the expected oxepinone from 2 is transformed directly into the quinone 11 (Scheme 2, 3 and 5). Isomerizations of 2-acetylphenyl propargyl ethers ( 4, 5 and 6 ) (Schemes 6, 7 and 8) are less successful because of side reactions. If however the acetyl group is replaced by a propionyl or substituted propionyl group (as in ethers 7 and 8 ) oxepinones are obtained again in good yield (Scheme 9). The mechanistic pathway for the transformation of naphthyl propargyl ethers (and phenyl derivatives) under influence of NaMSM is shown in Scheme 10. The base-catalysed conversion of 4-phenyl-l-benzoxepin-5(2H)-one,benzo[f]furo[2,3-c](10 H)-oxepin-4-oncsand 3-methoxy-G,11- dihydro-dibenzo[b, e]loxepin-11-oneinto thc corresponding quinones has been reported [13] [20] [21]. The conversion of 2-acylaryl propargyl others via the isolable benzoxepin-5-one derivativcs or directly into the specifically substituted 1,4-naphthoquinone derivatives is of synthetic interest.     

Stereochemie des Übergangszustandes aliphatischer CLAISEN-Umlagerungen. Vorläufige Mitteilung

The stereochemistry of the transition state in the CLAISEN rearrangement of crotyl propenyl ethers ( 2 ) has been established. By heating trans, cis-, cis, cis- and trans, trans-crotyl propenyl ether at 142,5°, erythro and threo 2, 3-dimethylpent-4-en-1-al ( 3 and 4 ) were obtained. From the ratio 3/4 it was shown that the rearrangement of the three ethers largely involves (97–98%) a chair-like transition state.     

Synthesis of Functionalized 1-Alkenylboronates via Hydroboration-Dealkylation of Alkynes with Diisopinocampheylborane

Hydroborations of propargyl chloride, ethyl propiolate, 3-trimethylsilyloxy-1-butyne, 1,1-diethoxy-2-propyne, 1-iodo- and 1-bromo-1-hexyne, and 1-bromo-3-chloro-1-propyne with diisopinocampheylborane 1, followed by dealkylation of the isopinocampheyl groups with acetaldehyde provide the corresponding 1-alkenylboronates in high yields with high regioselectivity.     

Asymmetric [2,3] Wittig rearrangement of crotyl furfuryl ethers

Asymmetric Wittig rearrangement of crotyl furfuryl ethers was investigated in diastereo- and enantioselective manners. Both (2S,3Z)- and (2S,3E)-3-penten-2-yl furfuryl ethers 3 and 9 rearranged with complete chirality transfer to give the syn- and anti-isomers 4 and 10, respectively. Enantioselective Wittig rearrangement of both (Z)-and (E)-crotyl furfuryl ethers 15 and 17 using butyllithium and (−)-sparteine was examined to afford (1S,2R)-1-(2-furyl)-2-methyl-3-buten-ol 16 in up to 43% ee.     

STEREOSELECTIVE SYNTHESIS OF PSEUDOGLYCAL C-GLYCOSIDES VIA TRICHLOROACETIMIDATE ACTIVATION OF GLYCALSa

A variety of functionalized pseudoglycal C-glycosides (C-pseudoglycals or C-hex-2-enopyranosides) have been obtained in excellent yield and stereoselectivity from the trimethylsilyl triflate (Me ₃SiOTf) catalyzed reaction of trichloroacetimidate derivative 2 with silylated nucleophiles such as allyl and propargyl silanes and silyl enol ethers.

     

Novel gallium-mediated C3-allylation of indoles and pyrroles in aqueous media promoted by Bu4NBr

A mild and efficient protocol for the coupling of indoles and pyrroles with allyl halides such as allyl bromide, crotyl bromide and propargyl bromide in the presence of gallium metal in a Bu₄NBr-DMF-H₂O system has been developed. The reaction is equally effective when cadmium is used in lieu of gallium and the corresponding 3-allyl indoles and 3-allyl pyrroles were obtained in almost comparable yields.     

Diastereoselective formation of 2-fluoro-2-trifluoromethyl-3,4-alkadienamides from propargyl alcohols and hexafluoropropene-diethylamine adduct (PPDA)

Treatment of propargyl alcohols (1) with hexafluoropropene-diethylamine adduct (PPDA) affords N,N-diethyl-2-fluoro-2-trifluoromethyl-3,4-alkadienamides (2) that are produced by the Claisen rearrangement of intermediary 2-alkynyl 1-(N,N-diethylamino)-2,3,3,3-tetrafluoro-1-propenyl ethers. Starting from propargyl alcohols bearing a triple bond at the terminal position, the corresponding products (2) were formed with a high stereoselectivity.     

Thermische Umlagerungen von halogensubstituierten Aryl-propargyläthern

7-Chloro-2-chloromethyl-benzofuran (13) and 3, 8-dichloro-2 H-1-benzopyran (12) are the main products from the thermal rearrangement (230–260°) of 2, 6-dichlorophenyl propargyl ether (7) . Compounds 17 , 18 and 19 are also formed, but in much smaller amounts (scheme 2 and table 1). However, in the case of the bromo-compounds 8 and 9 the rearrangement products are the benzofuran derivatives 21 and 22 , containing one bromine atom less per molecule (scheme 4). The corresponding naphthyl propargyl ethers 10 and 11 can be rearranged much more easily (180°) to the halogeno-naphthofurans 24 and 26 respectively. In the case of the bromo-ether 11 , 2-methyl-naphtho[2, 1-b]furan (25) is also formed (scheme 5). If the propargylic hydrogen atoms in 7 and 11 are replaced by deuterium atoms, then after rearrangement the deuterium atoms in the products d- 13 and d- 26 are found in the β-positions to the oxygen atom of the furan ring (schemes 3 and 5). It is suggested that initially a [3s, 3s]-sigmatropic rearrangement of the aryl propargyl ethers to the 6-allenyl-6-halogeno-cyclohexa-2, 4-dien-1-ones (e.g. a ) occurs and that from these the isolated products are formed via radical pathways (scheme 6). Under neutral conditions aryl propargyl ethers containing a free ortho-position give on heating benzopyran derivatives [2]. When this thermal reaction is carried out in sulfolane in the presence of powdered potassium carbonate, 2-methyl-benzofuran derivatives are formed (table 2). This leads to the possibility of preparing, depending on the conditions, either benzopyran or benzofuran derivatives by the Claisen rearrangement of aryl propargyl ethers. The mechanism for the formation of the benzofurans is given in scheme 9.     

Synthesis and characterization of poly(ɛ-caprolactone-co-ethylene glycol) star-type amphiphilic copolymers by “click” chemistry and ring-opening polymerization

Abstract

The synthesis of poly(?-caprolactone-co-ethylene glycol) AAB star-type amphiphilic copolymers were carried out by use of a “click” chemistry reaction to block propargyl polyethylene glycol (propargyl-PEG) to terminally azide poly(?-caprolactone) (PCL-N₃). For this purpose, propargyl-PEG was synthesized by the reaction of PEGs (3000?Da, 2000?Da, 1500?Da, and 1000?Da) and propargyl chloride. Terminally chloride poly(?-caprolactone) (PCL-Cl) was carried out by means of ring-opening polymerization (ROP) of ?-caprolactone (CL) and 3-chloro-1,2-propanediol. Synthesis of PCL-N₃ was obtained by the chemical interaction of PCL-Cl and sodium azide. By reacting propargyl-PEG and PCL-N₃, the star-type amphiphilic copolymers were obtained. The characterization of products was accomplished by using multiple instruments including ¹H-NMR, FT-IR, GPC, TGA, contact angles, and elemental analysis techniques.     

Synthesis of precursors of phomactins using [2,3]-Wittig rearrangements

o-Toluic acid has been converted into methyl (8RS,9SR)-7-(bromomethyl)-8,9-dimethyl-1,4-dioxaspiro[4.5]dec-6-ene-8-carboxylate, the stereochemical defining step being a conjugate addition of lithium dimethylcuprate to a cyclohexadienone prepared using a Birch reduction followed by an allylic oxidation. Displacement of the bromide with various propargylic alcohols followed by reduction of the ester and protection of the primary alcohol so formed then gave a series of propargyl cyclohexenylmethyl ethers. [2,3]-Wittig rearrangements of these and related propargylic ethers were studied as an approach to precursors of phomactins. The rearrangements were found to proceed by regioselective deprotonation of the propargylic side-chain to give substituted methylenecyclohexanes but mixtures of stereoisomers were obtained.Aspects of the chemistry of the Wittig rearrangement products were investigated including epoxidation, oxidation of the side-chain hydroxyl groups to give 2-ynones and reactions of the 2-ynones with lithium dimethylcuprate. The propargyl side-chain of a Wittig rearrangement precursor was elaborated to prepare an intermediate, which was fully functionalised for incorporation into a phomactin.     

Cyclooctanone synthesis via a formal [6+2] cycloaddition reaction of a dicobalt acetylene complex

An efficient formal [6+2] cycloaddition reaction of a new six-carbon unit with enol silyl ether was developed on the basis of a dicobalt hexacarbonyl propargyl cation species. Under the influence of EtAlCl₂, 6-benzoyloxy-2-(triisopropylsilyloxy)-1-hexen-4-yne-dicobalthexacarbonyl reacted with enol triisopropylsilyl ethers to yield 7-(triisopropylsilyloxy)-3-cyclooctyn-1-one-dicobalthexacarbonyl derivatives in good yield. The reactions with cyclic enol silyl ethers as well as acyclic enol silyl ethers exhibited remarkably high diastereoselectivity.     

Interception of tetrahedral intermediates in Pd(II)-mediated cycloalkenylations of olefinic enol ethers

The tetrahedral intermediate 3 has been intercepted during Pd(II)-cycloalkenylation of olefinic enolsilane 1 (R=SiMe₂t-Bu). In a related manner, the allyl and crotyl enol ethers 5–8 give with Pd(OAc)₂ acetoxy tetrahydrofurans (9, 12, 14, 16), convertible to butyrolactones or furans; competing Pd(II)-mediated Claisen rearrangement was not observed. The intramolecular Pd(II)-cycloalkenylation of the ketene acetal 17 leads to δ-lactones 18 and 19.     

Towards functional fluorous surfactants. Synthesis of hydrophilic fluorous 1,2,3-triazolylmethyl ethers and di(1,2,3-triazolylmethyl) ethers

Copper(I)-accelerated Huisgen–Meldal dipolar cycloaddition reactions between polyfluoroalkyl azides and propargyl ethers of n-octanol and of triethyleneglycol monomethyl ether exhibited variation in yield of 1,2,3-triazol-4-ylmethyl ethers. Microwave acceleration, and in situ generation of the azides, provided improvements in yield and efficiency. In contrast, very good yields of equivalent fluorous triazoles were obtained from a range of n-alkyl azides with propargyl ethers of perfluorohexylethanol and of perfluoroheptylmethanol through conventional copper(I)-promoted reactions. Together, the resulting substances with systematic variations in polyfluoroalkyl and alkyl substituent length and position of substitution, and degree of oxygen content, make up small libraries of hybrid fluorous 1,2,3-triazol-4-ylmethyl ethers as candidates for study as hydrophilic fluorous surfactants. In addition, a pilot sample of di(1,2,3-triazol-4-ylmethyl) ethers with 1′-octyl-1-polyfluoroalkyl-substituents and 1′-nonyl-1-perfluorooctylethyl substituents were synthesised for the first time in an effort to develop more functional, fluorous surfactants.     

Elaboration of the ether cleaving ability and selectivity of the classical Pearlman's catalyst [Pd(OH)2/C]: concise synthesis of a precursor for a myo-inositol pyrophosphate

The cleavage of propargyl, allyl, benzyl, and PMB ethers by Pd(OH)₂/C can be tuned in that order, by varying the reaction conditions. Other moieties such as C-C double bonds, esters, trityl ether, p-bromo and p-nitrobenzyl ethers are stable to these reaction conditions. Cleavage of allyl ethers can be made catalytic by using 1:1 mixture of Pd(OH)₂/C and Pd/C. The synthetic potential of the selective ether cleaving ability of Pd(OH)₂/C, essentially under neutral conditions, has been demonstrated by an efficient synthesis of a precursor for the preparation of an inositol pyrophosphate derivative.     

A DDQ-promoted metal-free cross-coupling of 1,3-diarylpropynes with hydroxyl via Sp C-H bond activation to form C-O bond

A metal-free coupling reaction between 1,3-diarylpropynes and alcohols/phenols/acids via propargylic sp³ C-H bonds activation and C-O bond formation reaction promoted by DDQ was realized. The reaction afforded series of propargyl ethers, propargyl esters and propargyl ketals.     

New approach for two chromene carboxylic acids having a fully substituted benzene ring

Two chromene carboxylic acids having a fully substituted benzene ring, 8-chlorocannabiorcichromenic acid (1) and mycochromenic acid (2), were synthesized via thermal cyclization of the corresponding four substituted phenyl propargyl ethers.