Soluble polyimides containing alicyclic structures

A series of novel aromatic diamines containing kinked cycloalkane structures between two phenyl rings were synthesized by HCl-catalyzed condensation reaction of excess aniline and corresponding cycloalkanone derivatives. The structures of the diamines were indentified by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The polymerization was conducted for 6∼8 h with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.37∼1.66 dl/g. All polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane, dimethylacetamide, etc. and the glass transition temperatures were observed at 290 to 372°C. UV-visible spectra were obtained to measure the transparency of polymer films. Most of the polymers showed high transmission above 90 % in the wavelength of 450 ∼ 600 nm.     

Synthesis and characterization of soluble polyimides from 2,2-bis(4-aminophenyl)cycloalkane derivatives

New aromatic diamines [(1) and (2)] containing polycycloalkane structures between two benzene rings were synthesized by HCl-catalyzed condensation reaction of aniline hydrochloride and corresponding polycycloalkanone derivatives. The structures of diamines were identified by ¹H-NMR, ¹³C-NMR, FTIR spectroscopy, and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The inherent viscosities of the resulting polyimides were in the range of 0.34–1.02 dL/g. The polyimides showed good thermal stabilities and solubility. All the polymers were readily soluble in N-methyl-2-pyrrolidone, m-cresol, tetrachloroethane, etc. Some of them were soluble even in chloroform at room temperature. The glass transition temperatures were observed in the range of 323–363°C, and all of the polymers were stable up to 400°C under nitrogen atmosphere. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3449–3454, 1999     

Preparation and characterization of polyimides containing triaryl imidazole side groups

A novel triaryl imidazole‐containing diamine, 3,5‐diamino‐N‐(4‐(4,5‐diphenyl‐1H‐imidazol)phenyl)benzamide, was successfully synthesized via the condensation of 4‐(4,5‐diphenyl‐1H‐imidazol)benzenamine and 3,5‐dinitrobenzoyl chloride, followed by reduction of the dinitro compound. A series of new aromatic polyimides with pendent triaryl imidazole moieties were prepared from the reaction of this diamine with various tetracarboxylic dianhydrides by a conventional two‐step polymerization process via thermal and chemical imidizations. The polyimides were obtained in quantitative yields with inherent viscosities of 0.21–0.44 dL/g. All the polymers are readily soluble in polar organic solvents. Flexible and strong films of polyimides were obtained by solution casting. The glass transition temperature of these polymers was in the range of 261–264°C. They were fairly stable up to a temperature around 300°C and lost 10% weight at 408°C under nitrogen. The ultraviolet–visible absorption spectra showed that all of the polymers had absorption maxima around 320 nm with a fluorescence emission maxima around 388–407 nm in N‐methyl‐2‐pyrrolidinone solution. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.7 V. Copyright © 2016 John Wiley & Sons, Ltd.     

Aldimine 2,6-bis(imino)pyridine iron(II) and cobalt(II)/methyl aluminoxane catalyst systems for polymerization of <Emphasis Type="Italic">tert-</Emphasis>butylacrylate

Aldimine 2,6-bis[(imino)methyl]pyridine iron(II) (1, 4, and 6) and cobalt(II) (3 and 5) complexes bearing bulky cycloaliphatic (bornyl and myrtanyl) or aromatic (naphthyl) terminal groups have been applied successfully, after activation with methyl aluminoxane (MAO), as catalysts for the polymerization of tert-butylacrylate. For comparison reasons, complex 2 that contains the ketimine ligand, 2,6-bis[(−)-cis-myrtanylimino)ethyl]pyridine (BMEP), has also been utilized. All studied complexes showed moderate polymerization activities, and they produced high molar mass syndiorich-atactic polymers. Surprisingly, the aldimine-based catalyst systems showed comparable activities compared with the corresponding ketimine complex (2), and they produced high molar mass polymers. In addition, complexes with bulky terminal cycloaliphatic substituents on the tridentate aldimine ligands showed higher polymerization activity compared with the aromatic ones (6). Polymerization activity and polymer molar masses are dependent on the ligand framework.     

Novel aromatic polyamides and polyimides functionalized with 4‐tert‐butyltriphenylamine groups

A new triphenylamine‐containing diamine monomer, 4,4′‐diamino‐4″‐tert‐butyltriphenylamine, was successfully synthesized by the cesium fluoride‐mediated N,N‐diarylation of 4‐tert‐butylaniline with 4‐fluoronitrobenzene, followed by the reduction of the nitro group. The obtained diamine monomer was reacted with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to produce two series of novel triphenylamine‐based polyamides and polyimides with pendent tert‐butyl substituents. Most of the polymers were readily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide (DMAc), and could be solution cast into tough and flexible polymer films. These polymers showed high glass transition temperatures between 282 and 320 °C, and they were fairly stable up to a temperature above 450 °C (for polyamides) or 500 °C (for polyimides). These polymers exhibited UV absorption maxima around 308 to 361 nm. The photoluminescence spectra of the polyamides in DMAc exhibited a peak emission wavelength in the blue at 421–433 nm. Cyclic voltammograms of polyamides and polyimides showed an oxidation wave at 1.0–1.1 V versus Ag/AgCl in an acetonitrile solution. All the polyamides and polyimides exhibited excellent reversibility of electrochromic characteristics by continuous several cyclic scans between 0.0 and 1.1–1.3 V, with a color change from the original pale yellowish neutral form to the green or blue oxidized forms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4579–4592, 2006     

Synthesis and properties of thermally stable polyimides bearing pendent fluorene moieties

A new diamine monomer containing fluorene unit, 3,5‐diamino‐N‐(9H‐fluoren‐2‐yl)benzamide was successfully synthesized via the condensation of 2‐aminofluorene and 3,5‐dinitrobenzoyl chloride and subsequent reduction of the dinitro compound. A series of novel aromatic polyimides having pendent fluorenamide moieties were prepared from the reaction of the diamine monomer and various tetracarboxylic dianhydrides by a conventional two‐step polymerization process. The polyimides were obtained in quantitative yields with inherent viscosities of 0.33–0.44 dl/g. The resulting polymers dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The glass transition temperature of these polymers was in the range of 261–289°C. They were fairly stable up to a temperature around 450°C and lost 10% weight in the range of 498–556°C in nitrogen. The UV–vis absorption spectra showed that all of the polymers had absorption maxima around 320 nm. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.3 V. Copyright © 2014 John Wiley & Sons, Ltd.     

New organo‐soluble aromatic polyimides based on 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride and aromatic diamines

New aromatic tetracarboxylic dianhydride, having isopropylidene and bromo‐substituted arylene ether structure 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride, was synthesized by the reaction of 4‐nitrophthalonitrile with 3,3′,5,5′‐tetrabromobisphenol A, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). The novel aromatic polyetherimides having inherent viscosities up to 1.04 dL g⁻¹ were obtained by either a one‐step or a conventional two‐step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), pyridine, and even in less polar solvents like chloroform and tetrahydrofuran (THF). These aromatic polyimides had glass transition temperatures in the range of 256–303°C, depending on the nature of the diamine moiety. Thermogravimetric analysis (TGA) showed that all polymers were stable, with 10% weight loss recorded above 470°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1673–1680, 1999     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Preparation and properties of new photosensitive polyimides from bis(4-aminophenyl)tetramethyldisilane and various aromatic tetracarboxylic dianhydrides

New photosensitive polymides containing photosensitive disilane unit were synthesised from 1,2-bis(4-aminophenyl)tetramethyldisilane and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that includes ring-opening polyaddition to yield the precursor polyamic acids, followed by cyclodehydration giving the respective polyimides. The polymaic acids had inherent viscosities between 0.63 and 0.85 dL/g depending on the tetracarboxylic dianhydride used. Excepting the polyimide obtained from pyromellitic dianhydride, all other polyimides were soluble in N-methyl-2-pyrrolidone, m-cresol, and pyridine. While the polyimide containing diphenyl sulfone unit was amorphous, the other polyimides were semi-crystalline polymers based on their x-ray diffractograms. The polyimides had glass transition temperatures between 235 and 304°C. They were thermally stable up to 380°C in both air and nitrogen atmospheres. All the polyamic acids showed a drastic decrease in the inherent viscosity upon UV light irradiation, implying the inherent photosensitivity of the polymers containing the disilane moiety.     

Synthesis and properties of soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride and aromatic diamines

Aromatic tetracarboxylic dianhydride having crank and twisted noncoplanar structure, 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 2,2′-dihydroxy-1,1′-binaphthyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). Binaphthyl-2,2′-diyl–containing novel aromatic polyimides having inherent viscosities up to 0.67 dL/g were obtained by the one-step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and pyridine. These aromatic polyimides had glass transition temperatures in the range of 280–350°C, depending on the nature of the diamine moiety. All polymers were stable up to 400°C, with 10% weight loss being recorded above 485°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1937–1943, 1998     

Polyimide structure–property relationships. II. Polymers from isomeric diamines

An extensive study of the effects of stereoisomeric variations in aromatic polyimide structures on polyimide properties was conducted. The structural variations were incorporated into the polyimides through the use of two complete series of isomeric aromatic diamine monomers, the diaminodiphenylmethanes and the diaminobenzophenones, as well as several pairs of diamine isomers. The ability of the diamines to polymerize was related to the basicities, and thus reactivities, of the amino groups. Diamines with an amino group located ortho to the group connecting the two aromatic rings were successfully polymerized with dianhydrides for the first time to high molecular weight poly(amic acids). The stereoisomeric polyimides were characterized by determining the glass transition temperatures T_g, mechanical properties, and thermooxidative stabilities of thin films of the polymers. The polymers prepared from p-diamines were shown to have the highest softening points and thus, the most rigid molecular structures. Those synthesized from m-diamines had the lowest T_g values, inferring the most flexible molecular backbone. With limited exceptions, the use of diamines with ortho-oriented amine groups failed to improve the flexibility of the polyimides since their T_g values were usually as high as those of polymers made from p-diamines. Only slight differences in mechanical properties of the isomeric polyimide films were attributable to the variations in isomeric structure, except for those properties dependent upon T_g changes, such as elevated temperature mechanical properties. A study of the thermooxidative stability of the polyimides showed little difference between the polymers prepared from the diaminobenzophenones, but marked differences were observed between the individual members of the diaminodiphenylmethane-derived polyimides.     

Novel soluble thermally stable silane-containing aromatic polyimides with reduced dielectric constant

Bis(p-aminophenoxy)diphenylsilane (BPS), bis(m-aminophenoxy)diphenylsilane (BMS) and bis(5-amino-1-naphthoxy)diphenylsilane (BAS) as three silane-diamines were prepared by the reactions of 4-aminophenol, 3-aminophenol, and 5-amino-1-naphthol respectively, with dichlorodiphenylsilane in the presence of triethylamine. The related silane-containing polyimides were prepared by two-step polycondensation reactions of these diamines with three different aromatic dianhydrides. All the polymers were characterized and their physical and thermal properties were studied. The polymers showed high thermal stability while their solubility was greatly increased in polar aprotic solvents. Wide angle X-ray diffraction showed that all the polyimides were almost amorphous. Also their dielectric constants were decreased due to the incorporation of softening and low-polarizing siloxane units into the polymer backbone.     

Synthesis of soluble and thermally stable polyimide from new diamine bearing N-[4-(9H-carbazol-9-yl)phenyl] formamide pendent group

A new aromatic diamine monomer, N-(4-(9H-carbazol-9-yl)phenyl)-3,5-diaminobenzamide, was successfully prepared in four steps using carbazole as starting material and polymerized with three aromatic tetracaboxylic acid dianhydrides via the conventional two-stage synthesis including the polyaddition and chemical cyclodehydration to produce a series of the aromatic polyimides. The polyimides were characterized by FT-IR, ¹H NMR, and ¹³C NMR spectroscopy, differential scanning calorimetric (DSC) and thermo gravimetric analysis (TGA) analysis. The polyimides with inherent viscosities in the range of 0.38–0.46 dL/g showed excellent solubility in various solvents such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), pyridine and dioxane. DSC showed the glass transition temperatures (T_g) in the range of 277–288 °C. TGA showed that all polymers were stable, with 10% weights loss recorded above 524 °C in air atmosphere. Preliminary tests on films of the polyimides indicate that the materials are brittle.     

含苯并咪唑单元可溶性聚酰亚胺的合成和性能

合成了一种刚性芳香二胺单体3,3',5,5'-四甲基-4,4'-二胺基苯基甲苯(BDAP),与6-氨基苯基-2-氨基苯并咪唑(BIA)组成混合二胺,分别与4种商品化的二酐单体(均苯四酸二酐(PMDA)、联苯四酸二酐(BPDA)、二苯酮四酸二酐(BTDA)和二苯醚四酸二酐(ODPA))一步法缩聚合成了一系列可溶性聚酰亚胺.采用FTIR,1H-NMR,UV-Vis,DMA和TGA等测试方法对所制备的聚酰亚胺进行了表征.结果表明,所制备的聚酰亚胺具有良好的溶解性能,能够在NMP和DMAc等常规溶剂中溶解;耐热性及力学性能优良,玻璃化转变温度超过410℃,分解温度在500℃以上.     

Synthesis and characterization of novel electroactive polyamides and polyimides with bulky 4‐(1‐adamantoxy)triphenylamine moieties

A novel adamantoxytriphenylamine‐containing diamine monomer, 4‐(1‐adamantoxy)‐4′,4″‐diaminotriphenylamine, was synthesized from readily available reagents. Two series of novel electroactive aromatic polyamides and polyimides with bulky 4‐(1‐adamantoxy)triphenylamine moieties were prepared from the newly synthesized diamine monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides, respectively. All the resulting polyamides and most of the polyimides were readily soluble in polar organic solvents and could be solution cast into tough and flexible films. These polymers showed moderate to high glass transition temperatures in the range of 263–311 °C, and they were fairly stable up to a temperature above 480 °C (for polyamides) or 500 °C (for polyimides). Cyclic voltammograms of the polyamides and polyimides showed one pair of reversible redox waves with oxidation half‐wave potentials (E_1/2) in the range of 0.78–0.81 and 0.97–1.05 V, respectively, versus Ag/AgCl in an acetonitrile solution. In addition, the polymers were found to display stable electrochromic properties by repeated cyclic scans between 0.0 and 1.1–1.2 V, with coloration change from a colorless or pale yellowish neutral form to a dark blue or bluish green oxidized form. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1740–1755, 2009     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.     

Solid‐state amidization and imidization reactions in vapor‐deposited poly(amic acid)

The condensation polymerization of 4,4′‐oxydianiline with pyromellitic dianhydride for the formation of poly(amic acid) and the subsequent imidization for the formation of polyimides were investigated for films prepared with vapor‐deposition polymerization techniques. Fourier transform infrared spectroscopy, thermal analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry of films at different temperatures indicated that additional solid‐state polymerization occurred before imidization. The experiments revealed that, upon vapor deposition, poly(amic acid) oligomers formed that had a number‐average molecular weight of about 1500 Da. Between 100–130 °C, these chains underwent an additional condensation reaction and formed slightly higher molecular weight oligomers. Calorimetry measurements showed that this reaction was exothermic [enthalpy of reaction (ΔH) ～ ?30 J/g] and had an activation energy of about 120 kJ/mol. The experimental ΔH values were compared with results from ab initio molecular modeling calculations to estimate the number of amide groups formed. At higher temperatures (150–300 °C), the imidization of amide linkages occurred as an endothermic reaction (ΔH ～ +120 J/g) with an activation energy of about 130 kJ/mol. The solid‐state kinetics depended on the reaction conversion as well as the processing conditions used to deposit the films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5999–6010, 2004     

Syntheses and properties of aromatic polyamides and polyimides based on N-phenyl-3,3-bis[4-(p-aminophenoxy) phenyl] phthalimidine

N-Phenyl-3,3-Bis[4-(p-aminophenoxy)phenyl] phthalimidine ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of N-phenyl-3,3-bis(4-hydroxyphenyl) phthalimidine with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.55–1.64 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone (NMP). Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 293–319°C and 10% weight loss occurred up to 480°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP, m-cresol, and o-chlorophenol. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

The preparation of novel silica modified polyimide membranes: synthesis,characterization, and gas separation properties

In this study, new monomers having siloxane groups were synthesized as an intermediate for preparation of siloxane modified polyimide polymers. Then with these monomers, the synthesis of uncrosslinked and crosslinked polyimide–siloxane hybrid polymer membranes were achieved. The purposes of the preparation of modified polyimides were to modify the thermal and chemical stability, and mechanical strength of polyimides, and to improve the gas separation properties of polymers. The new diamine monomer having siloxane groups was prepared from 3,5‐diaminobenzoic acid (3,5‐DABA) and 3‐aminopropyltrimethoxysilane (3‐APTMS) in N‐methyl‐2‐pyrollidone (NMP) at 180°C. The modified polyimide membranes having different amount of siloxane groups were synthesized from pyromellitic dianhydride (PMDA), 4,4‐oxydianiline (ODA), and 3,5‐diaminobenzamido‐N‐propyltrimethoxy silane (DABA/PTMS) in NMP using a two‐step thermal imidization process. The synthesis of modified polyimide membranes were characterized by Fourier transform infrared spectroscopy (FTIR). The thermal analysis of the polyimides were carried out by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Water absorption and swelling experiments were also carried out for the investigation of structural properties of polymers. FTIR observations confirmed that the polyimide membranes with new diamine intermediate were successfully obtained. Thermal analysis showed that the uncrosslinked copolyimides exhibited two glass transition temperatures, indicating that they were separated microphases and it was found that all the modified copolyimides had showed higher glass transition temperature (T_g) than unmodified polyimides. The separation properties of the prepared polyimide membranes were also characterized by permeability for O₂ and N₂ gases and ideal selectivity values were calculated. Copyright © 2009 John Wiley & Sons, Ltd.