Hydroboration,haloboration and phenylboration polymerizations

A polyaddition between diene and monoalkylborane produced a polymer consisting of C-B bonds in the main chain. The resulting organoboron polymers can be used as a novel type of reactive polymers. On the other hand, hydroboration polymerization of dicyano compounds produced air-stable poly(cyclodiborazane)s having B-N four-membered rings via dimerization of iminoborane species. Poly(organoboron halide)s were prepared either by haloboration polymerization between diynes and boron tribromide or by hydroboration polymerization of dienes with monobromoborane. Furthermore, phenylboration polymerization of diynes or diisocyanates gave new organoboron mainchain polymers.     

Ketyl Radical Anion Mediated Radical Polymerization and Anionic Ring-Opening Polymerization to Give Polymers with Low Molecular Weight Distribution

The development of novel polymerization capable of yielding polymers with low molecular weight distribution (Đ) is essential and significant in polymer chemistry, where monofunctional initiator contains only one initiation site in these polymerizations generally. Here, ketyl radical anion species is introduced to develop a novel Ketyl Mediated Polymerization (KMP), which enables radical polymerization at carbon radical site and anionic ring-opening polymerization at oxygen anion site, respectively. Meanwhile, polymerization and corresponding organic synthesis generally couldn't be performed simultaneously in one pot. Through KMP, organic synthesis and polymerization are achieved in one pot, where small molecules (cyclopentane derivates) and polymers with low Đ are successfully prepared under mild condition simultaneously. At the initiation step, both organic synthesis and polymerization are initiated by single electron transfer reaction with ketyl radical anion formation. Cyclopentane derivates are synthesized through 3–3 coupling reaction and cyclization. Polystyrene and polycaprolactone with low Đ and a full monomer conversion are prepared by KMP via radical polymerization and anionic ring-opening polymerization, respectively. This work therefore enables both organic synthesis and two different polymerizations from same initiation system, which saves time, labour, resource and energy and expands the reaction mode and method libraries of organic chemistry and polymer chemistry.     

超临界CO2在高分子合成与制备中的应用

介绍超临界二氧化碳流体作为介质在高分子合成与制备中的研究进展。文中表明，可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应，可用超临界二氧化碳溶胀聚合法制备梯度共混物。此外，超临界二氧化碳还可用于聚合物分级和聚合物微孔、微纤与微球材料的制备等，显示出超临界二氧化碳是一种对环境无污染且价廉的     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Polyhomologation: the living polymerization of ylides

The polymerization of dimethylsufoxonium methylide to produce linear polymethylene polymers is described. The reaction is catalyzed/initiated by trialkylboranes and gives organoboron star polymers as the primary product. The reaction is a living polymerization, providing control over molecular weight and functionality at the polymer chain ends. A variety of novel polymethylene architectures are available by this methodology.     

Functionalization of polymers prepared by ATRP using radical addition reactions

Low molecular weight linear poly(methyl acrylate), star and hyperbranched polymers were synthesized using atom transfer radical polymerization (ATRP) and end‐functionalized using radical addition reactions. By adding allyltri‐n‐butylstannane at the end of the polymerization of poly(methyl acrylate), the polymer was terminated by allyl groups. When at high conversions of the acrylate monomer, allyl alcohol or 1,2‐epoxy‐5‐hexene, monomers which are not polymerizable by ATRP, were added, alcohol and epoxy functionalities respectively were incorporated at the polymer chain end. Functionalization by radical addition reactions was demonstrated to be applicable to multi‐functional polymers such as hyperbranched and star polymers.     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

Synthesis of functionalized asymmetric star polymers containing conductive polyacetylene segments by living anionic polymerization

Novel 3-arm ABC, 4-arm ABCD, and 5-arm ABCDE asymmetric star polymers comprising the conductive polyacetylene precursor, poly(4-methylphenyl vinyl sulfoxide) (PMePVSO), and other segments, such as polystyrene, poly(alpha-methylstyrene), poly(4-methoxystyrene), poly(4-trimethylsilylstyrene), and poly(4-methylstyrene), were synthesized by the methodology based on living anionic polymerization using DPE-functionalized polymers. This methodology involves the addition reaction of a DPE-functionalized polymer to a living anionic polymer followed by the living anionic polymerization of MePVSO initiated from the in situ formed polymer anion with two, three, or four polymer segments. The resultant asymmetric star polymers possessed predetermined molecular weights, narrow molecular weight distributions (Mw/Mn < 1.03), and desired compositions as confirmed by SEC, 1H NMR, SLS, and elemental analysis. After thermal treatment, the PMePVSO segment in the star polymer could be completely converted into a conductive polyacetylene segment, evident from TGA and elemental analysis. These asymmetric star polymers are expected to exhibit interesting solution properties and unique microphase-separated morphological suprastructures with potential applications in nanoscopic conductive materials. Moreover, this methodology can afford the target asymmetric star polymers with arm segments varying in a wide range and enables the synthesis of more complex macromolecular architectures.     

Synthesis and characterization of novel crosslinkable polymers with a nonlinear optical chromophore as a pendant group

New crosslinkable polymers with a nonlinear optical (NLO) active chromophore as a pendant group were synthesized by condensation chain polymerization via palladium‐catalyzed carbon–carbon coupling reactions. The polymerization yields were almost quantitative between the diiodobenzene (DIB) and diethyldipropargyl malonate (DEDPM) or 4‐(dimethylamino)‐4′‐(6‐dipropargylacetoxypropylsulfonyl)stilbene (DASS‐6) monomers. To improve the molecular weight and mechanical properties of the NLO active polymer, we carried out the copolymerization with DIB and DASS‐6 with various feed ratios of DEDPM. The resulting polymers were soluble in organic solvents and spun‐cast onto indium tin oxide‐coated glass substrates to make thin films. The molecular structures of the resulting polymers were characterized with various instrumental methods to confirm the carbon–carbon coupling reactions between the DIB and diacetylene monomers. The absorption of the ultraviolet–visible spectrum of the resulting polymers was drastically reduced after thermal curing at 160 °C because of the crosslinking of the reactive acetylene group in the polymer backbone. The electrooptic coefficient (r₃₃) measured at 1.3 μm ranged from 7 to 15 pm/V. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4025–4034, 2001     

超临界CO2中的高分子合成研究进展

本文介绍以超临界CO₂流体为介质的高分子合成的研究进展。说明可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯和苯乙烯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应。这显示出超临界CO₂是一种对环境无污染且价廉的替代溶剂。     

结构明确的梳形支化聚合物的合成与表征

通过活性聚苯乙烯(PS)和聚异戊二烯(PI)负离子与含1,1-二苯基乙烯(DPE)侧基的聚苯乙烯(PSe)的偶联反应合成了结构明确的每个重复单元含一条侧链的梳形支化聚合物,其中,PSe是通过Sc单体的原子转移自由基聚合(ATRP)和Wittig反应制得的.用IR1、H-NMR、GPC和SLS等测试方法对所得梳形支化聚合物进行了详细表征,讨论了活性负离子链与PSe的DPE基团的配比对接枝率的影响.结果表明,活性负离子链与DPE基团的偶联反应是高效的,可以通过调节活性负离子链与DPE基团的加料比来控制接枝率.另外,还讨论了PSe和活性负离子链的分子量对接枝率的影响.结果表明,在实验范围内当活性负离子链过量时可获得几乎定量的接枝率.     

Formation and reaction of polymer ions in solutions studied by pulse radiolysis

Formation and reaction of polymer anions in solutions of poly(methyl methacrylate), poly(ethyl methacrylate), poly(n-butyl methacrylate), poly(isobutyl methacrylate) and poly(4-vinylbiphenyl) in hexamethylphosphorictriamide and 2-methyltetrahydrofuran were studied by nanosecond pulse radiolysis. The rate constants of the reactions of the polymers with solvated electrons were determined and they were compared with those of the corresponding low molecular-weight molecules. Besides, the decay reactions as well as the electron transfer reactions of the anion radicals of these polymers were investigated. The time-profile of the poly(4-vinylbiphenyl) anion observed in 2-methyltetrahydrofuran at room temperature showed a spike which was followed by a slow decay. The fast decaying component was tentatively attributed to geminate recombinations within micro domains in the solution where the polymers were entangled.     

Synthesis of poly(vinylene-arsine)s: alternating radical copolymerization of arsenic atomic biradical equivalent and phenylacetylene

Novel organoarsenic polymers, poly(vinylene-arsine)s, were synthesized by a free-radical alternating copolymerization of phenylacetylene with cyclooligoarsines as an atomic biradical equivalent. The polymerization between pentamethylpentacycloarsine (1a) or hexaphenylhexacycloarsine (1b) with phenylacetylene (2) in the presence of a catalytic amount of AIBN (in benzene; refluxing; for 12 h) gave the corresponding poly(vinylene-arsine)s. The obtained polymers were soluble in common organic solvents such as THF, chloroform, and benzene. From gel permeation chromatographic analysis (chloroform, PSt standards), the number-average molecular weights of the polymers from 1a and 1b were found to be 11500 and 3900, respectively. The structures of the polymers were supported by 1H and 13C NMR spectroscopies. The corresponding polymer was also obtained by irradiation of a benzene solution of 1a and 2 with xenon lamp at room temperature. After the polymer from 1a was stirred vigorously with 30% H2O2, the 1H NMR spectrum of the polymer showed the methyl proton that was assigned to As(III)-Me, suggesting the insensitivity of the trivalent state arsenic in the main chain to the oxidation. The structures and the molecular weights of the polymers were insensitive to the feed ratio of the monomers. This result indicates that the addition of the arsenic radical to phenylacetylene was a rate-determining step in the copolymerization.     

Synthesis and reactions of poly-tetrahydrofuran with azetidinium salt end-groups

The bulk polymerization of tetrahydrofuran (THF) intiated by methyl trillate or triflic anhydride leads to poly-THF's of polydispersity < 1.2 and possessing one or two oxonium chain ends, if the conversion is kept below 15%. Reaction of these “living” polymers with an N-substituted azetidine leads to the corresponding poly-THF's with one or two quaternary azetidinium chain ends. These polymers can be isolated in pure form by precipitation in water without affecting the azetidinium functions. At increased temperature, these functions undergo ring-opening reactions with nucleophiles. This process has been used to prepare block-copolymers and polymer networks containing poly-THF segments and to synthesize mono or bifunctional ester-terminated poly-THF's. The last reaction is achieved by simple precipitation of the azetidinium-terminated poly-THF into an aqueous solution of the sodium carboxylate at room temperature.     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Introduction of peroxide groups onto carbon black surface by radical trapping and radical graft polymerization of vinyl monomers initiated by the surface peroxide groups

The introduction of peroxide groups onto carbon black surface was achieved through the trapping of the peroxide radicals formed by the decomposition of polymeric peroxide, such as poly(tetraethylene glycol peroxyadipate) (ATPPO), and bis-peroxide, such as 1,1′-bis (t-butyldioxy)cyclohexane (Perhexa-C), by the surface: the amount of peroxide groups introduced onto carbon black surface by the treatment with ATPPO and Perhexa-C were determined to be 0.07 mmol/g and 0.12 mmol/g, respectively. The polymerization of vinyl monomers with positive e-value, such as methyl methacrylate and 2-hydroxyethy methacrylate, was successfully initiated by the peroxide groups introduced onto carbon black surface. During the polymerization, the corresponding polymers were effectively grafted onto the surface as a result of the propagation of polymer from the surface radicals formed by decomposition of the peroxide groups. The polymerization of vinyl monomers with negative e-value, such as styrene and vinyl acetate, however, was scarcely initiated by the peroxide groups on carbon black. This may be due to the fact that surface active radicals, which were formed by the hydrogen abstraction from carbon black by fragment radicals, inhibit the polymerization of vinyl monomers with negative e-value. © 1996 John Wiley & Sons, Inc.     

Siloxane/silane‐crosslinked systems from supercritical carbon dioxide: II. Pendant phenyl poly(carbosilane/siloxane)s

New silicone‐containing polymers with crosslinkable units have been synthesized by hydrosilation polymerization in both toluene and supercritical carbon dioxide (70°C, 3000 psi) catalyzed by platinum‐divinyltetramethyldisiloxane (Pt‐DVTMS). It was found that high molecular polymers were obtained in both toluene and supercritical carbon dioxide. The polymers were characterized by FTIR, NMR, GPC, TGA, and DSC. The molecular weights of these polymers ranged from 9000 to 39,000. With further hydrolysis and thermal curing, the molecular weight can be increased significantly. Comparison of the properties between reactions in toluene versus supercritical carbon dioxide indicated that the green solvent is a usable alternative for hydrosilation polymerization. The new polymers synthesized in either toluene or supercritical carbon dioxide are thermally stable, ranged from 350 to 488°C. Copyright © 2008 John Wiley & Sons, Ltd.     

Block polymer preparation via both anionic and free radical polymerization

A new method of block polymer preparation using combined anionic and free radical polymerization was investigated. In the method the first monomer was polymerized anionically. The resulting polymeric anions were then reacted with an episulfide to form a polymer with mercaptan end-groups. This mercapto—polymer was mixed with a second monomer(s) in an inert solvent for the free radical polymerization. Conventional free radical initiation methods were used to initiate the polymerization of the second monomer but because of the high chain transfer constant of the mercaptan groups, a large number of the free radical chains would grow from the first polymer to form a block polymer. Block polymers difficult or impossible to make by direct anionic polymerization can thus be prepared. Several block polymers, including the new thermoplastic elastomers, poly[(styrene-co-acrylonitrile)-b-butadiene-b-(styrene-co-acrylonitrile)] and poly(bromostyrene-b-butadiene-b-bromostyrene) were prepared by this method.     

Epoxide polymers: Synthesis,stereochemistry, structure,and mechanism

Epoxide polymerization studies have yielded technically important catalysts and polymers. The polymers were studied by cleaving them with Group IA organometallics to monomer, dimer, and trimer glycol fragments. The identification of these glycol fragments has established that the crystalline polymers from the cis- and trans-2,3-epoxybutanes are respectively racemic and meso-diisotactic and that the amorphous polymer from the cis-oxide is disyndiotactic. These studies also showed that the amorphous fraction from propylene oxide polymerization with coordination catalysts contains substantial head-to-head and tail-to-tail segments. This work has led to a much better understanding of the mechanism of epoxide polymerization. These facts were established: (1) epoxides polymerize with inversion of configuration of the ring-opening carbon atom; (2) monosubstituted epoxides polymerize largely by attack on the primary carbon with a coordination catalyst; and (3) two or more metal atoms must be involved in the coordination polymerization of epoxides.