Synthesis and properties of liquid crystalline polyurethanes

1,4-Bis(p-hydroxybenzoate)phenylene was prepared using 1,4-bis(trimethylsiloxy)benzene and p-hydroxybenzoyl chloride as starting materials. A series of novel 1,4-bis(p-hydroxyalkoxybenzoate)phenylene were synthesized by reaction of 1,4-bis(p-hydroxybenzoate) phenylene with 3-brompropanol and 4-bromobutanol, respectively. The liquid crystal polyurethanes were prepared by 1,4-bis(p-hydroxyalkoxybenzoate)phenylene with MDI (p-methylene diphenylenediisocyanate) and 2,4-TDI(2,4-toluenediisocyanate), respectively. The thermotropic properties, the melting point (T _m) and the isotropization temperature (T _i) of the synthesized polyurethanes were characterized by DSC, IR and POM. It showed that all of the polyurethane polymers exhibited thermotropic liquid crystalline properties between 144°C and 260°C. The transition temperature (T _m and T _i) decreased with an increase in the length of the methylene spacer. __________ Translated from Journal of Qingdao University of Science and Technology, 2006, 27(1) (in Chinese)     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

Polymerization of Bis(Pyridine)bis-(2,4,6-tribromophenoxo)copper(II) Complex (Py2Cu(TBrP)2) by Electrooxidation and Structural Characterization by 1H-NMR, 13C-NMR,and FTIR Spectroscopies

Abstract

Electroinitiated polymerization of bis(2,4,6-tribromophenoxo)- bis(pyridine)copper(II) complex was achieved in dimethylformamide-tetrabutylammonium tetrafluoroborate solvent-electrolyte couple under air or nitrogen at room temperature by constant potential electrolysis. Polymerization conditions were based on the peak potentials measured by cyclic voltammetry. The structural analyses of the polymers were done by ¹H-NMR, ¹³C-NMR, and FTIR spectral analyses along with molecular weight measurements by cryoscopy. The poly(dibromo phenylene oxide)s obtained only at oxidation potentials in either atmosphere were found to be highly linear, indicating mainly 1,4-catenation was taking place.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Poly(Aryl Ether)s from a Novel Biphenol Monomer Containing a Dicyanoarylene Group

Abstract

The preparation of a novel biphenol, 1,4-bis(4-hydroxyphenyl)-2,3-dicyanonaphthalene, from phenolphthalein is described. This biphenol was prepared in high yield in a four-step reaction sequence. The biphenol can be polymerized with activated dihalides such as 1,2-bis-(4-fluorobenzoyl)-3,4,5,6-tetraphenylbenzene, bis(4-fluorophenyl) sulfone, and 4,4′-dichlorobenzophenone to give high molecular weight amorphous poly(aryl ether)s. The polymers have glass transition temperatures ranging from 284 to 319°C and are easily cast into flexible, colorless, and transparent films. The 5% weight loss temperatures of these polymers, by thermogravimetric analysis in air and nitrogen, are all above 500°C.     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Two Cd(II) coordination polymers based on tris(p-carboxylphenyl)phosphine oxide accompanied by in situ ligand formation

Two Cd(II) coordination polymers constructed from tris(p-carboxylphenyl)phosphine oxide (H₃TPO), [Cd(HTPO)(1,4-bix)·3H₂O]_n (1) and [Cd₂(HTPO)(HBPO)(H₂O)₂]_n (2) (1,4-bix = 1,4-bis(imidazol-1-ylmethyl)benzene, H₃BPO = bis(4-carboxylphenyl)phosphinic acid), were synthesized and identified by IR, elemental analysis, and single-crystal X-ray diffraction analysis. The 1,4-bix ligand leads to 1 as a ladder-like 1D chain structure. In 2, adjacent Cd₂ units are bridged by HBPO^2– and HTPO^2– ligands to form a 3D structure. The H₃BPO ligand is formed from the in situ reaction of H₃TPO. It is the first example from hydrated Cd(II) salt promoting partial hydrolysis of a phosphine oxide ligand. The thermal behavior and solid-state photoluminescence properties correlated with the corresponding structural features were investigated.     

Poly(p-phenylenes) with well-defined side chain polymers

1,4-Dibromo-2,5-bis(bromomethyl)benzene and benzene-2,5-dibromomethyl-1,4-bis(boronic acid propanediol diester) were used as bifunctional initiators in Atom Transfer Radical Polymerization (ATRP) of styrene or in cationic ring opening polymerization (CROP) of tetrahydrofuran in conjunction with CuBr /2,2'-bipyridine or AgSbF₆, respectively. The resulting well-defined macromonomers with low polydispersities, bearing functional groups as bromine or boronic ester were used in Suzuki or Yamamoto type couplings, leading to poly(p-phenylene)s (PPPs) with polystyrene (PSt), polytetrahydrofuran (PTHF) or alternating PSt/PTHF side chains. The new polymers were characterized by GPC, ¹H-NMR, ¹³C-NMR, IR and UV analysis. Thermal behavior of the precursors PSt or PTHF macromonomers and the final polyphenylenes were investigated by TGA and DSC analyses and compared.     

Chelate polymers. VI. New copolymers of the some siloxane containing bis(2,4-dihydroxybenzaldehyd-imine)Me with bis(p-carboxyphenyl)diphenylsilane

New high complex polymeric structures containing metal chelate sequences alternating, through esteric bridges, with silane units were obtained. The azomethine of 2,4-dihydroxybenzaldehyde with 1,3-bis(aminopropyl)tetramethyldisiloxane has been synthesized and in situ complexed with copper (II), nickel (II), cobalt (II) and cadmium (II). The obtained bis-phenolic chelates were covalently inserted in polymeric linear structures by their polycondensation with bis(p-carboxyphenyl)diphenylsilane as a diacid chloride. The structures of the obtained polymers were confirmed by IR, UV, ¹H NMR and elemental analysis. The characterization was made by TGA, DSC, solubility tests and GPC. The electrical conductivity of both chelate monomers and their polymers was investigated, all compounds showing typical semiconducting behaviors.     

Synthesis,characterization and solid‐phase extraction properties of novel bis(diazo‐azomethine) ligands supported on mesoporous silica

The novel mesoporous silica‐supported bis(diazo‐azomethine) compounds have been synthesized and characterized successively. In the first step, 1,3‐phenylenedimethanamine and 4,4′‐diaminodiphenylmethane were diazotized, and the obtained bis(diazonium) cations were coupled with 2,4‐dihydroxybenzaldehyde. The synthesized bis(diazo‐carbonyl) compounds, 5,5′‐((1,3‐phenylenebis(methylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A1) and 5,5′‐((methylenebis(4,1‐phenylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A2) were chemically supported on amino‐modified silica‐gel (as L1 and L2). Elemental analysis, liquid chromatography‐mass spectroscopy, liquid‐phase NMR (¹H and ¹³C) and solid‐phase NMR (CP‐MAS ²⁹Si and ¹³C), FT‐IR, TG/DTA, scanning electron microscopy and energy‐dispersive X‐ray spectroscopy techniques were used for characterizations of all the synthesized compounds. The syringe and batch techniques were applied for the solid‐phase extraction properties of Pb(II), Cu(II), Cd(II) and Cr(III) ions using an inductively coupled plasma‐atomic emission spectroscopy instrument. The recoveries of Pb(II), Cu(II), Cd(II) and Cr(III) ions have been achieved to 95–99% with the (RSDs) of ± 2–3% in optimum conditions.     

Aliphatic polyimides from phenylene bis(succinic anhydride) and bis(glutaric anhydride)

Meta and para derivatives of phenylene bis(succinic anhydride) and bis(glutaric anhydride) were obtained from 1,3- and 1,4-bis(β-cyano-β-carbethoxyvinyl)benzene with potassium cyanide or Meldrum acid followed by hydrolysis with concentrated hydrochloric acid and dehydration with acetic anhydride. Aliphatic polyimides were prepared from these anhydrides with six aromatic diamines through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimides was examined by thermogravimetric analysis.     

Heterocyclic Poly(Bismaleimide)s. II. Synthesis and Characterization of New Poly(Ether-Bismaleimide)s Containing Parabanic Rings

Abstract

New poly(ether-bismaleimide)s containing parabanic rings were obtained by the nucleophilic substitution reactions of 1,3-bis(4-dichloromaleimido-phenyl)parabanic acid (4) with various bisphenols. The structures of the resulting polymers were confirmed by IR and elemental analysis. The polymers are soluble in aprotic dipolar solvents and showed lower thermal stability than other polymers without parabanic rings.     

Hydrogen‐bonded thermotropic liquid‐crystalline polyester–amides from bis(hydroxy alkamido)aranes: Synthesis and properties

Hydrogen‐bonded aromatic–aliphatic polyester–amides (PEAs) were prepared by solution/melt polycondensation of aromatic–aliphatic amidodiols 1,4‐bis(4‐hydroxybutyramide)benzene (BHBB), 1,4‐bis(5‐hydroxy pentamide)benzene, 1,4‐bis(6‐hydroxyhexamide)benzene, 1,4‐bis(4‐hydroxybutyramidexylene), 1,4‐bis(5‐hydroxypentamidexylene, 1,4‐bis(4‐hydroxybutyramide)benzene, and 1,4‐bis(6‐hydroxyhexamidexylene) with terephthaloyl chloride/dimethyl terephthalate. Aromatic–aliphatic amido diols were prepared by the aminolysis of γ‐butyrolactone, δ‐valerolactone, and ?‐caprolactone with aromatic diamines such as paraphenylene diamine and paraxylene diamine. The monomers and polymers were characterized by chemical analysis (hydroxyl value and elemental analysis), Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR. The thermal‐ and phase‐transition behaviors of the polymers were investigated by differential scanning calorimetry in combination with hot‐stage optical microscopy. Crystallinity of polymers was examined with wide‐angle X‐ray diffraction. The polymers exhibited liquid crystallinity with layered structures formed by self‐organization of the hetero intermolecular hydrogen‐bonded networks indicating smectic phases except for PEAs prepared from BHBB. The hydrogen atom of the phenyl‐substituent group forces the neighboring carbonyl groups out of plane of the rings preventing formation of layered structures in the case of BHBB. The PEAs retained intermolecular hydrogen bonding even in the mesomorphic state, and variations in the hydrogen‐bonded lamellae/micelles might be responsible for the variations from one smectic to another texture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 335–346, 2003     

Nano silver particles catalyzed synthesis,molecular docking and bioactivity of α-thiazolyl aminomethylene bisphosphonates

Abstract

A new series of α-thiazolyl aminomethylene bisphosphonates were synthesized by a three component reaction of 4-aryl substituted thiazol-2-amine with different dialkyl/aryl phosphites and triethyl orthoformate in the presence of Ag NPs (nano particles) as a catalyst under solvent free conditions. All the synthesized target compounds were characterized by ¹H, ¹³C, ³¹P, mass and elemental analysis. The target compounds were screened for their in vitro antioxidant, antibacterial and antifungal activity. Molecular docking studies were also performed. The results revealed that among the synthesized compounds tetramethyl(((4-(4-methoxyphenyl)thiazol-2-yl)amino) methylene)bis(phosphonate) (5d), tetramethyl(((4-(4-fluorophenyl)thiazol-2-yl)amino) methylene) bis(phosphonate) (5h), and tetramethyl(((4-(4-bromophenyl)thiazol-2-yl)amino)methylene) bis (phosphonate) (5j) showed remarkably higher antioxidant activity by DPPH and H₂O₂ than the standard ascorbic acid. Compounds tetramethyl(((4-phenyl thiazol-2-yl)amino) methylene) bis(phosphonate) (5a), 5d, 5h and tetraethyl(((4-(4-bromophenyl)thiazol-2-yl) amino)methylene)bis (phosphonate) (5k) showed good antibacterial activity. 5a, 5d, and 5h also showed rather higher antifungal activity than the standard flucanozole. Computational docking methods have been used to predict how several aminomethylene bisphosphonate derivatives compete against the inhibitor BPH-1330 at the crystal enzyme structure of the 4H3A protein active site and how R and R₁ influence their binding ability.     

Protein–induced aggregation of fluorescent conjugated polyelectrolytes with sulfonate groups: Synthesis and its sensing application

Anionically charged fluorescent conjugated polyelectrolytes of poly{[4,7‐(2,1,3‐benzothiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P1 ) and poly{[4,7‐(bis(thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P2 ) were synthesized by Suzuki crosscoupling polymerization in the presence of a palladium catalyst. The conjugated polyelectrolytes with sulfonate groups, as efficient signal amplifying reporters, were carefully designed to be soluble in water over the entire pH range examined and interact with proteins through intermolecular forces. The polymers exhibited blue emission in aqueous solutions but green or red emission in solid form depending on the conjugation length due to intermolecular exciton migration. The anionic conjugated polymers exhibited blue‐to‐green or blue‐to‐red changes in fluorescence upon exposure to charged proteins, indicating that the polymers have potential applications in fluorescent array systems for protein. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and thermal properties of disiloxane-arylene polymers by dehydrocoupling polymerization of bis(dimethylsilyl)arylene with water

Disiloxane-arylene polymers having phenylene, biphenylene, and fluorenylene groups as arylene units were synthesized by dehydrocoupling polymerization of corresponding bis(silane) derivatives with water. The reactivity of Si-H was not affected by the structure of aromatic groups in the reaction. The polymers containing biphenylene and fluorenylene units are amorphous and show higher glass transition temperatures than the polymer from 1,4-bis(dimethylsilyl)benzene.     

Syntheses and electroluminescence properties of conjugated poly(p‐phenylene vinylene) derivatives bearing dendritic pendants

A series of new poly(p‐phenylene vinylene) derivatives with different dendritic pendants—poly{2‐[3′,5′‐bis(2″‐ethylhexyloxy)benzyloxy]‐1,4‐phenylenevinylene} (BE–PPV), poly{2‐[3′,5′‐bis(3″,7″‐dimethyl)octyloxy]‐1,4‐phenylenevinylene} (BD–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBE–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBD–PPV), and poly[(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)‐co‐(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)] (BBE‐co‐BBD–PPV; 1:1)—were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, photoluminescence, and electroluminescence spectroscopy. The obtained polymers possessed excellent solubility in common solvents and good thermal stability, with a 5% weight loss temperature of more than 328 °C. The weight‐average molecular weights and polydispersity indices of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were in the range of 1.33–2.28 × 10⁵ and 1.35–1.53, respectively. Double‐layer light‐emitting diodes (LEDs) with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline) aluminum/Mg:Ag/Ag devices were fabricated, and they emitted green‐yellow light. The turn‐on voltages of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were approximately 5.6, 5.9, 5.5, 5.2, and 4.8 V, respectively. The LED devices of BE–PPV and BD–PPV possessed the highest electroluminescent performance; they exhibited maximum luminance with about 860 cd/m² at 12.8 V and 651 cd/m² at 13 V, respectively. The maximum luminescence efficiency of BE–PPV and BD–PPV was in the range of 0.37–0.40 cd/A. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3126–3140, 2005     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.     

Organometallic polymers. XXIX. Synthesis and characterization of ferrocene-containing siloxane polymers from bis(dimethylamino)silane–disilanol condensation

A new monomer, 1,1′-bis(dimethylaminodimethylsilyl)ferrocene, was synthesized by two routes and polymerized with three aryl disilanols: dihydroxydiphenylsilane, 1,4-bis(hydroxydimethylsilyl)benzene, and 4,4′-bis(hydroxydimethylsilyl)biphenyl, yielding three different polysiloxanes. Melt polymerizations carried out at 1 torr pressure and 100°C resulted in the highest molecular weight polymers. Intramolecular cyclization competed with intermolecular chain extension in polymerization of the bis(aminosilane) with dihydroxydiphenylsilane, resulting in isolation of a bridged derivative, 1,3,5-trisila-2,4-dioxa-1,1,5,5-tetramethyl-3,3-diphenyl[5]ferrocenophane. Cyclization did not compete significantly during the formation of polymers from this bisaminosilane and the two remaining diols, as evidenced by higher yields and greater molecular weights. These polymers could be cast as tough flexible films, and fibers could be drawn from their melts. TGA and DSC data showed the polymer formed from 1,1′-bis(dimethylaminodimethylsilyl)ferrocene and 1,4-bis(hydroxydimethylsilyl)benzene to be at least as thermally stable as an arylene siloxane polymer which differed from the ferrocenylsiloxane structure only in the replacement of the ferrocene moiety with a p-substituted phenylene linkage. The ferrocene-containing polymers were generally hydrolytically stable under conditions of refluxing THF–H₂O(10 : 1) for 1 hr. The polymer-forming reaction was found to follow second-order kinetics, and the specific rate constants for formation of two of the polymers were measured.