Certification of SRM 1589a PCBs,pesticides, PBDEs,and dioxins/furans in human serum

The Certificate of Analysis for SRM 1589a PCBs, Pesticides, PBDEs, and Dioxins/Furans in Human Serum has been updated to include certified concentration values for 27 polychlorinated biphenyl (PCB) congeners, three chlorinated pesticides, and four polybrominated diphenyl ether (PBDE) congeners as well as reference concentration values for 27 additional PCB congeners, six additional chlorinated pesticides, three additional PBDE congeners, and selected polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). This represents an addition of concentration values for 29 PCB congeners and for PBDE congeners that were not quantified in the previous issue of SRM 1589a. With the increased number of certified and reference concentration values for PCBs and the inclusion of certified and reference concentration values for PBDEs, this serum material will be more useful as a reference material for contaminant monitoring in human tissues and fluids. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Polybrominated diphenyl ether congeners and toxaphene in selected marine standard reference materials

Polybrominated diphenyl ether (PBDE) congeners and components of the complex mixture toxaphene are stable in the environment and readily bioaccumulated into wildlife and human tissues. PBDEs are presently used in large quantities worldwide as flame retardants in textiles, furniture, computer equipment, and cables. Toxaphene is a complex mixture of chlorinated bornanes and bornenes that was the most heavily used pesticide in the United States until it was banned in 1982; however, some countries continue to use toxaphene. The National Institute of Standards and Technology has quantified PBDE congeners and toxaphene in several available Standard Reference Materials (SRMs) using methods of gas chromatography with electron impact mass spectrometry (GC-EI-MS) and GC negative chemical ionization (NCI) MS, respectively. SRM 1588a Organics in Cod Liver Oil and SRM 1945 Organics in Whale Blubber were examined for PBDE congeners 47, 99, 100, 153, and 154, total toxaphene, and toxaphene congeners 26, 50, and 62. SRM 1946 Lake Superior Fish Tissue was also examined for total toxaphene and toxaphene congeners. The sum of the PBDE congeners (mean, (1 SD) wet basis) for SRM 1945 was 150 ng g^–1 (7 ng g^–1). The concentration of PBDE 47 in SRM 1588a was 82.7 ng g^–1 (2.8 ng g^–1). Other PBDEs were detected in SRM 1588a but were not quantified due their low levels. The total toxaphene (wet mass basis) was 1,210 ng g^–1 (127 ng g^–1), 1,960 ng g^–1 (133 ng g^–1), and 3,980 ng g^–1 (248 ng g^–1) in SRMs 1945, 1946, and 1588a, respectively. The values for PBDEs and toxaphene determined in the SRMs, while not certified, indicate that the SRMs will be suitable control materials for PBDE and toxaphene analyses.     

Polybrominated diphenyl ethers in Baltic herring from Estonian waters, 2006–2008

Concentrations of polybrominated diphenyl ethers (PBDEs) in Baltic Sea herring Clupea harengus membras L. collected from Estonian coastal waters are reported. In the period 2006–2008 the total PBDE concentrations (ΣPBDE, sum of 15 congeners) in Baltic herring varied between 0.57 and 4.08 ng g⁻¹ fresh weight. Highest ΣPBDE concentrations were in a 2007 sample from the mouth of the Gulf of Finland and in a 2007 sample from the Gulf of Riga. The former contained a high concentration of BDE 209 (16.3 ng g⁻¹) and in the latter this congener was the second most abundant. It is not clear whether the BDE 209 concentration in the Gulf of Finland sample is not an artefact and this value was not included in the above range. The PBDE concentrations increased with the age of herring are similar to those reported in [1] in fish collected in the Bothnian Sea in 2002 and did not increase between 2002 and 2008. The majority of concentrations in herring from the Estonian coastal zone was <1.0 ng g⁻¹ fresh weight. The PBDE congener profiles varied regionally as well as with age of the fish. The main congeners were mostly the BDEs 47, 99, and 100. Some of the variations probably caused by measurement artefacts.     

Marine mammal blubber reference and control materials for use in the determination of halogenated organic compounds and fatty acids

The National Institute of Standards and Technology (NIST) has a diverse collection of control materials derived from marine mammal blubber, fat, and serum. Standard Reference Material (SRM) 1945 Organics in Whale Blubber was recertified for polychlorinated biphenyl (PCB) congeners, organochlorine pesticides, and polybrominated diphenyl ether (PBDE) congeners. SRM 1945 has also been assigned mass fraction values for compounds not frequently determined in marine samples including toxaphene congeners, coplanar PCBs, and methoxylated PBDE congeners which are natural products. NIST also has assigned mass fraction values, as a result of interlaboratory comparison exercises, for PCB congeners, organochlorine pesticides, PBDE congeners, and fatty acids in six homogenate materials produced from marine mammal blubber or serum. The materials are available from NIST upon request; however, the supply is very limited for some of the materials. The materials include those obtained from pilot whale blubber (Homogenates III and IV), Blainville’s beaked whale blubber (Homogenate VII), polar bear fat (Homogenate VI), and California sea lion serum (Marine Mammal Control Material-1 Serum) and blubber (Homogenate V).     

Analysis of polybrominated diphenyl ethers (PBDEs) by liquid chromatography with negative-ion atmospheric pressure photoionization tandem mass spectrometry (LC/NI-APPI/MS/MS): application to house dust

Eight polybrominated diphenyl ether (PBDE) congeners of primary interest to the US EPA were separated using reverse-phase liquid chromatography on an octadecylsilane column. BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were baseline-resolved under isocratic conditions in 92:8 methanol/water (v/v). Negative-ion atmospheric pressure photoionization (NI-APPI) with a toluene dopant produced precursor ions corresponding to [M–Br+O]^– for the eight congeners studied. Each congener was quantified by tandem mass spectrometry through a unique multiple reaction monitoring (MRM) transition. On-column limits of detection were between 2.4 and 27.8 pg for the eight congeners studied, with an intra-day method precision of 9%. The LC/NI-APPI/MS/MS method was validated for the analysis of the eight PBDE congeners in NIST SRM 2585 (Organics in House Dust). Pressurized liquid extraction (PLE) with subsequent LC/NI-APPI/MS/MS analysis afforded quantitative recovery for all eight PBDE congeners with recoveries ranging from 92.7 to 113%. The liquid-phase separation of the LC/NI-APPI/MS/MS method is not prone to the thermal degradation issues that plague splitless GC based analyses of highly brominated PBDEs such as BDE-209.     

Quantitative property-property relationship (QPPR) approach in predicting flotation efficiency of chelating agents as mineral collectors

The QPPR approach has been used to model cupferrons as mineral collectors. Separation efficiencies (Es) of these chelating agents have been correlated with property parameters namely, log P , log K oc , substituent-constant σ , Mullikan and ESP derived charges using multiple regression analysis. Es of substituted-cupferrons in the flotation of a uranium ore could be predicted within experimental error either by log P or log K oc and an electronic parameter. However, when a halo , methoxy or phenyl substituent was in para to the chelating group, experimental Es was greater than the predicted values. Inclusion of a Boolean type indicative parameter improved significantly the predictability power. This approach has been extended to 2-aminothiophenols that were used to float a zinc ore and the correlations were found to be reasonably good.     

Study of the Lipophilic Character of Xanthine and Adenosine Derivatives: II. Relationships Between Log K', RM and Log P Values

Abstract

The log k' values of a series of xanthine and adenosine derivatives were measured by means of a reversed-phase HPLC. The HPLC data were shown to be well correlated with previously reported R_M and R_MC18 values. The equations describing the relationships log k'/R_M and log k'/R_MC18 allowed the calculation of the log k' values of some compounds, which were not tested in the HPLC system. Since the relationship log k'/log P is very close to the previously described relationships R_M/log P and R_MC18/log P one can conclude that reversed-phase TLC and HPLC are very similar in describing the lipophilicity of the compounds.     

Evaluation of Octanol-Water Partition Coefficients Using Capillary Gas Chromatography With Cold On-Column Injection

Abstract

A general procedure is described for the determination of the octanol-water partition coefficients (log P) of very lipophilic compounds by the shake flask method, employing the analytical technique of capillary gas chromatography with cold on-column injection. The solute and an internal reference with a known log P value are partitioned between the layers of an octanol-water mixture and their relative concentrations are determined by analysis of each phase, using highly standardized chromatographic conditions. The overall method is demonstrated to be convenient, reproducible, and useful for the determination of the partition coefficients of a wide variety of compounds with log P values as high as 5.7.     

The Crystal Structure and Intermolecular Interactions in Fenamic Acids–Acridine Complexes

In order to improve pharmaceutical properties of drugs, complexes are synthesized as combinations with other chemical substances. The complexes of fenamic acid and its derivatives, such as mefenamic-, tolfenamic- and flufenamic acid, with acridine were obtained and the X-ray structures were discussed. Formation of the crystals is determined by the presence of the intermolecular O–H^…N hydrogen bond that occur between fenamic acids and acridine. Intermolecular interactions stabilizing the crystals such as π^…π stacking, C–H^…X (X = O, Cl) intermolecular hydrogen bonds as well as C–H^…π and other dispersive interactions were analyzed by theoretical methods: the quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) approaches.     

Determination of polybrominated diphenyl ethers in indoor dust standard reference materials

Polybrominated diphenyl ethers (PBDEs) have been measured for the first time in three different indoor dust Standard Reference Materials (SRMs) prepared by the National Institute of Standards and Technology (NIST). Two of these, SRM 2583 (Trace Elements in Indoor Dust) and SRM 2584 (Trace Elements in Indoor Dust), have been certified previously for lead and other inorganic constituents. A third, SRM 2585 (Organics in Indoor Dust), is a new indoor dust reference material prepared by NIST which will be certified for various organic compounds (polycyclic aromatic hydrocarbons, pesticides and polychlorinated biphenyls) in 2005 including certified concentrations for 16 individual PBDE congeners and reference values for an additional three PBDE congeners. Dust SRMs were analyzed for 30 PBDE congeners using high-resolution gas chromatography combined with low-resolution mass spectrometry operated in both negative chemical ionization (GC/ECNI–MS) and electron impact ionization (GC/EI–MS) modes. Sensitivity was an order of magnitude higher using GC/ECNI–MS relative to GC/EI–MS. These SRMs have been characterized and compared to the three PBDE commercial products (pentaBDE, octaBDE and decaBDE). PentaBDE and DecaBDE were present in all three SRMs and were the dominant commercial products, making up approximately 33% and 58%, respectively. Recent studies suggest that house dust may be a leading source of human exposure to PBDEs. These SRMs are the first reference materials with certified concentrations for PBDEs, which will aid in validating future measurements of PBDEs in house dust and other similar matrices. Electronic Supplementary Material Supplementary material is available for this article at http://dx.doi.org/ 10.1007/s00216-005-0227-y     

Molecular Lipophilicity Calculations of Chemically Heterogeneous Chemicals and Drugs on the Basis of Structural Similarity and Physicochemical Parameters

Abstract

QSARs based on molecular polarizability (α) and H-bond acceptor factors (∑C_a) as independent variables provided good predictability of octanol/water partition coefficients (P) for chemicals and drugs. However, for some molecules containing few functional groups, the calculated values deviated significantly from those observed. This approach gave good results when applied to a set of 138 chemicals and drugs previously studied by Mannhold and Dross who compared other methods to calculate log P values.

At the same time, three variations on a molecular similarity approach were pursued. In this study, a large training set with experimentally determined octanol/water partition coefficients (P) was searched for structures closely related to the compound-of-interest. The most successful of these variations took the mean log P value of few most closely related compounds after each was adjusted for differences between their and the compound-of-interest's polarizabilities (α) and H-bond acceptor capacities (∑C_a).     

Determination of 41 polybrominated diphenyl ethers in soil using a pressurised solvent extraction and GC-NCI-MS method

A rapid and reliable analytical method based on pressurised solvent extraction (PSE) and GC-NCI-MS was developed for the determination of 41 different PBDEs in soil. All PBDEs, including mono- to hepta-BDEs (sum of 39 congeners), one nona-BDE and deca-BDE, were efficiently extracted from soil samples using the extraction technology of PSE. The extract was then cleaned up on a florisil column. Satisfactory separation of 41 PBDE congeners was obtained on a 15-m DB-5MS capillary column, saving the use of another 30-m column specific for the separation of mono- to hepta-BDEs. PBDEs were identified and quantified by GC-MS in negative chemical ionisation (NCI) mode, and further confirmed in semi electron impact (SEI) mode when the ion source was also NCI. The method detection limits ranged from 0.01 to 0.03?ng?g^?1?dw for mono- to hepta-BDEs, 1.43?ng?g^?1?dw for the nona-BDE and 0.20?ng?g^?1?dw for deca-BDE. The applicability of the method was tested in soil samples collected from an e-waste recycling site at Guiyu. Twenty-one PBDEs (mono- to deca-) were detected, and eighteen congeners were quantified. The concentration range of PBDEs was 0.78–436?ng?g^?1?dw. BDE-47, BDE-99, BDE-153, BDE-183, BDE-206 and BDE-209 were the dominant congeners, and BDE-209 accounted for 62% of the total PBDEs. The congener profiles of PBDEs in soil samples were similar to those in three commercial PBDE products (Penta-, Octa- and Deca-BDE), and Deca-BDE product was the most important contributor.