Polymerization of Styrene Initiated by 1,4-Dimethyl-1,4-bis(p-anisyl)-2-tetrazene

Abstract

The polymerization of styrene (St) initiated by 1,4-dimethyl-1,4-bis(p-anisyl)-2-tetrazene (1a) was studied kinetically in benzene. The polymerization proceeds through a radical mechanism. The rate of polymerization is proportional to [1a]^0.5 and [St]^1.0. The overall activation energy for the polymerization is found to be 81.2 kJ/mol within the temperature range of 65 to 80°C. The activation parameters for the decomposition of 1a at 70°C are k_d = 1.88 × 10^?5s^?1, δH? = 133.1 kJ/mol, and δS? = 29.9 J/mol·deg.     

Polymerization of Acrylamide with Permanganate/Mercaptosuccinic Acid Initiator System

The aqueous polymerization of acrylamide initiated by the acidified potassium permanganate/mercaptosuccinic acid redox system was studied at 35 ± 0.2°C in nitrogen. In the studied range of activator concentration (2.0 × 10^?3 to 6.25 ± 10^?3 mole/liter) the polymerization rate remains unaffected. The initial rate of polymerization varies linearly with KMnO₄ and acrylamide concentrations in the studied range. The activation energy was found to be 6.61 kcal/mole (27.63 kJ/mole) in the temperature range of 30–50°C. The molecular weight of polyacrylamide was found to be independent of [KMnO₄] but increased with increasing monomer concentration. The effect of DMF on polymerization rate and molecular weight was also investigated.     

Polymerization of acrylamide with persulfate–thiomalic acid initiator

The redox system of potassium persulfate–thiomalic acid (I₁–I₂) was used to initiate the polymerization of acrylamide (M) in aqueous medium. For 20–30% conversion the rate equation is where R_p is the rate of polymerization. Activation energy is 8.34 kcal deg^?1 mole^?1 in the investigated range of temperature 25–45°C. M_n is directly proportional to [M] and inversely to [I₁]. The range of concentrations for which these observations hold at 35°C and pH 4.2 are [I₁] = (1.0–3.0) × 10^?3, [I₂] = (3.0–7.5) × 10^?3, and [M] = 5.0 × 10^?2–3.0 × 10^?1 mole/liter.     

The Polymerization of Free Enols with Electron-Deficient Comonomers

Abstract

The balance between kinetics and thermodynamics is illustrated herein by the first direct polymerization of vinyl alcohol, the thermodynamically unstable tautomer of acetaldehyde, at a rate faster than it can tautomerize. Vinyl alcohol was formed through the acid catalyzed hydrolysis of ketene methyl vinyl acetal. With excess water present, the kinetics of tautomerization first order dependence upon vinyl alcohol (k_obs = 2.73 × 10^?4 s^?1). Under water starved conditions, however, the kinetics now show a zero order dependence upon the concentration of vinyl alcohol (k_obs = 3.5 × 10^?6 M/s). Under these latter conditions, the half life of vinyl alcohol is nearly 24 hours at room temperature. Although cationic and homo free radical polymerization of vinyl alcohol failed, we found that this meta-stable species could be quantitatively polymerized in a copolymerization (AIBN, hυ, -10 to 25°C) with maleic anhydride. The k_obs for copolymerization was found to be 4.41 × 10^?4 sec^?1 at ?10°C. Since the rate of polymerization is far greater than that of tautomerization under these conditions (ca. 30 times faster at ?10°C), there is no significant increase in acetaldehyde concentration during polymerization.     

Vinyl polymerization. 364. Polymerization of methyl methacrylate initiated with benzaldehyde

Benzaldehyde (PhCHO) is found to be able to initiate the radical polymerization of methyl methacrylate (MMA). The rate of polymerization is expressed by the following equation: R_p = const[PhCHO]^0.5[MMA]^1.5. The overall activation energy is estimated to be 56.3 kJ mole^?1. The mechanism of polymerization is discussed.     

Polymerization of Acrylonitrile Initiated by 1,4-Dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene

The polymerization of acrylonitrile (AN) initiated by 1,4-dimethyl-1,4-bis(p-nitrophenyl)-2-tetrazene (Ie) was studied in dimethylformamide (DMF) at high temperature. The polymerization proceeds by a radical mechanism. The rate of polymerization is proportional to [Ie]^0.64 and [AN]^1.36. The overall activation energy for the polymerization is 21.5 kcal/mole within the temperature range of 115-130°C. The chain transfer of Ie was also undertaken over the temperature range of 120-135°C. The activation parameters for the decomposition of Ie at 120°C are k_d = 2.78 × 10^?6 sec^?1, ΔH^? = 40.8 kcal/mole, and ΔS^? = 19.5 cal/mole-deg, respectively.     

Vinyl Polymerization. 269. Polymerization of Methyl Methacrylate Initiated by p,p'-Dimethoxydiphenyldiazomethane

Using p,p'-dimethoxydiphenyldiazomethane (DMDM) as initiator, the polymerization of methyl methacrylate (MMA) in benzene or in bulk was carried out. The initial rate of polymerization, R_p, was found to be expressed by the following equation:

R_p = k[DMDM]^0.53 [MMA]^0.84

The polymerization was confirmed to proceed by a radical mechanism. The over-all activation energy for the polymerization in benzene was calculated as 19.3 kcal/mole. The rate of thermal decomposition of DMDM was also measured in benzene and the rate equation was obtained as follows:

k_d (sec^?1) = 1.0 × 10¹⁵ exp (^?29.1 kcal/RT) (for 50-80°C)

Explanations of these observations are discussed in connection with those of the preceding papers.     

Thermal polymerization of N-tert-butylacrylamide in 1,4-dioxane

The kinetics of the thermal polymerization of N-tert-butylacrylamide were investigated in 1,4-dioxane as solvent, in the 65–80°C temperature range. It was found that the overall rate of polymerization which was determined by a gravimetric method is proportional to the 1.9 power of monomer concentration at 70°C. The rate of initiation was determined by ESR spectroscopy using DPPH as an inhibitor, and it was found that the order of initiation rate is 1.8 with respect to monomer concentration at 70°C. The overall activation energy for the thermal polymerization of N-tert-butylacrylamide was found to be 64 ± 9 kJ mol^?1 in the 65–80°C temperature range. The activation energy for the rate of initiation was also determined and it was found to be 90 ± 23 kJ mol^-1.     

Aqueous Polymerization of Methyl Methacrylate

Aqueous polymerization of methyl methacrylate (MMA), initiated by the potassium bromate-thioglycollic acid (TGA) redox system, has been studied at 30 ± 0.2° C under positive pressure of nitrogen. The rate is given by K[MMA] [TGA] ⁰[KBrO₃]^x where × = 1 for lower KBrO₃ concentrations and 0.5 for higher KBrO₃ concentrations. The reaction has been studied over the 20–45°C range. The activation energy was found to be 65.72 kJ/mol (15.71 kcal/mol) in the investigated range of temperature. Inorganic electrolytes except MnSO₄·4H₂O and Na₂C₂O₄ depress both the rate of polymerization and the maximum conversion. All the alcohols (viz., MeOH, EtOH, iso-PrOH, tert-BuOH) and acetone depress the rate of polymerization as well as the maximum conversion.     

Vinyl polymerization. 361. Polymerization of 2,2,4-trimethyl-3-on-1-pentyl methacrylate

2,2,4-Trimethyl-3-on-1-pentyl methacrylate (TMPM) was first synthesized from the condensation reaction of 2,2,4-trimethyl-1-pentanol-3-on with methacrylic acid. Second, the polymerization of TMPM and the copolymerization of TMPM with styrene (St) were carried out in benzene at 60°C, using 2,2′-azobisisobutyronitrile (AIBN) as an initiator. As the result of kinetic investigation, the rate of polymerization (R_p) could be expressed by: R_p = k[AIBN]^0.5 [TMPM]^1.0. Kinetic constants of polymerization of TMPM were obtained as follows: k_p/k = 0.27 dm^3/2 mole^?1/2 sec^?1/2, 2fk_d = 1.23 × 10^?5 sec^?1, f = 0.73, C_m = 2.6 × 10^?5, C_s = 1.1 × 10^?5. From the results the reactivity of TMPM was found to be larger than that of methyl methacrylate. The overall activation energy was calculated to be 110 kJ mole^?1. The following monomer reactivity ratios and Q, e values were obtained: TMPM(M₁) ? St(M₂): r₁ = 1.50, r₂ = 0.14, Q₁ = 2.63, E₁ = 0.45.     

Alternating Copolymers of Limonene with Methyl Methacrylate: Kinetics and Mechanism

The radical copolymerization of limonene (optically active) with methyl methacrylate in xylene at 80±0.1°C for 1 hr, initiated by benzoyl peroxide (BPO) yield alternating copolymer(s), under the inert atmosphere of nitrogen, as evidenced by reactivity ratios r₁ (MMA)=0.07 and r₂ (limonene)=0.012 using the Kelen–Tüdos method. The kinetic expression is Rα[I]^0.5[MMA]^1.0[Lim.]^?1.0. The decrease in the rate of polymerization with increase in concentration of limonene is due to penultimate unit effect. The overall energy of activation is calculated as 49 kJ/mole. FTIR of the copolymer(s) shows the characteristic frequencies at 1732.40 and 2951.40 cm^?1 due to –OCH₃ of MMA and aromatic C–H stretching of limonene, respectively. ¹H NMR spectra shows peak at 3.8–4.1 δ and 5.3–5.6 δ due to –OCH₃ of MMA and trisubstituted olefinic protons [–CH=CH–CH₂–] of limonene, respectively.     

Vinyl polymerization. 403. Polymerization of vinyl monomer initiated with sodium poly-p-vinylphenolate

The polymerization of vinyl monomer initiated by poly-p-vinylphenol (PVPh) in NaOH aqueous solution was carried out at 85°C with shaking. Methyl methacrylate (MMA) was polymerized, whereas styrene and acrylonitrile were not. PVPh, which is dissociated into phenolate form (PVPh^?Na⁺) in NaOH aqueous solution, was effective for the polymerization. The effects of the amounts of MMA, PVPh, NaOH, and H₂O on the conversion of MMA were studied. The rate of polymerization of MMA increased with an increase in the molecular weight of PVPh-Na. The overall activation energy was estimated as 54 kJ mol^?1. The polymerization proceeded through a radical mechanism. The addition of tetra-n-butylammonium bromide increased the rate of polymerization.     

Thermodynamic Studies of Bi-Univalent Electrolytes. VI. Thermodynamics of Cadmium Acetate from E. M. F. and Calorimetric Measurements

E. M. F. of the Cell, Cd-Hg (2-phase)/CdAc₂(m), Hg₂Ac₂(s)/Hg was measured at 20°, 25°, 30° and 40°C. The standard e. m. f. of the cell, Cd/CdAc₃(m), Hg₂Ac₂(c)/Hg was evaluated as E°=1.1500?11.09×10^?4T+1.06×10^?8T² The thermodynamic data of the reaction, Cd(c) + Hg₂Ac₂(c)=2Hg(l)+Cd⁺⁺(aq)+2Ac^?(aq) at 25°C were estimated as ΔF°=?42,139, ΔH°=?48,698 cal mole^?1 and ΔS°=?22.0 cal deg^?1 mole^?1 at 25°C. The thermodynamic data for the formation of Hg₂Ac₂(s) were evaluated as ΔF_f°=?202.3, ΔH_f°=?154.5 Kcal mole^?1 and S°=72.9 cal deg^?1 mole^?1. From measurements of the heats of solution of CdAc₂·2H₂O in aqueous solution, the relative partial molal enthalpies of cadmium acetate in aqueous solution were estimated.     

Water-Insoluble Polyacrylamides. III. Kinetics of Free-Radical Polymerization of N-Acryloyl-m-aminobenzoic Acid

Abstract

The synthesis of water-insoluble poly(N-acryloyl-m-aminobenzoic acid) was investigated for free-radical polymerization. The kinetics of polymerization of N-acryloyl-m-aminobenzoic acid initiated by AIBN in dioxane at 80–100°C were studied. The rate of polymerization was found for various concentrations of monomer and initiator. The overall activation energy was found to be 27.2 kJ/mol.     

Determination of Kinetic Parameters of Ethyl Methacrylate Polymerization Initiated by the Redox Pair SO2-tert-Butyl Hydroperoxide

Abstract

In the bulk polymerization of ethyl methacrylate with the redox initiator pair sulfur dioxide-tert-butyl hydroperoxide (SO₂-TBHP), the kinetic parameters were determined by the dead-end polymerization technique using the dilatometric method. Polymerization was conducted with various initiator pair compositions in the temperature interval of 12–35°C. An activation energy of 14.1 kJ/mol for [SO₂]/[TBHP] = 0.44 was determined for this temperature range. The values of k ² _p/k _t obtained in this study were in the interval 1.34 × 10^?4 to 1.11 × 10^?3 L/mol·s. The f/k _d ratios for the redox pair at different temperatures and for different initiator ratios were also calculated. The f/k _d ratios of the initiator pair changed between 15.1 and 187.6 seconds. The wide variations in these kinetic parameters were explained on the basis of competitive reactions between the redox pair and their reaction products.     

Thermal decomposition kinetics of bisthiourea cadmuim(II) tetrathiocyanato diammine chromate(III)

Cadmium thiourea reinickate undergoes two-stage thermal decomposition on heating. The DTG peak temperatures are 291 and 469°C and the corresponding DTA temperatures are 255 and 490°C. The kinetic parameters for the first stage decomposition are E* ≈ 120kJ mole^?1; Z ≈ 1.2 × 10⁸ cm³ mole^?1 sec^?1 and ΔS* ≈ ?95 J mole^?1 K^?1. For the second stage, E* ≈ 133 kJ mole^?1; Z ≈ 6.1 × 10⁵ cm^?1 mole^?1 sec^?1 and ΔS* ≈ ?142 J mole^?1 K^?1.     

Living Carbocationic Polymerization. LVII. Kinetic Treatment of Living Carbocationic Polymerization Mediated by the Common Ion Effect

Abstract

The effect of anion concentration on the apparent rate constant of polymerization k^A _p of isobutylene (IB) induced by the 2-chloro-2,4,4-trimethylpentane (TMPCl)/TiCl₄ initiating system using the CH₂Cl₂/nC₆H₁₄ (60/40 v/v) solvent system at ?40 and ?80°C was studied by the use of nBu₄NCl. Computer simulation has shown that k^A _p decreases several orders of magnitude upon the addition of even a very small amount of common anion TiCl^?- ₅ to the charge. The rate of change is reduced in the concentration range of experimental interest. It was concluded that the decrease of k^A _p with increasing TiCl ^?- ₅ concentration is mainly due to the decreasing contribution of propagation by free ions. The contribution (%) of propagation by free ions to the apparent rate of propagation was calculated.     

Controlled radical polymerization of styrene mediated by the C‐phenyl‐N‐tert‐butylnitrone/AIBN pair: Kinetics and electron spin resonance analysis

Kinetics of the free radical polymerization of styrene at 110 °C has been investigated in the presence of C‐phenyl‐N‐tert‐butylnitrone (PBN) and 2,2′‐azobis(isobutyronitrile) (AIBN) after prereaction in toluene at 85 °C. The effect of the prereaction time and the PBN/AIBN molar ratio on the in situ formation of nitroxides and alkoxyamines (at 85 °C), and ultimately on the control of the styrene polymerization at 110 °C, has been investigated. As a rule, the styrene radical polymerization is controlled, and the mechanism is one of the classical nitroxide‐mediated polymerization. Only one type of nitroxide (low‐molecular‐mass nitroxide) is formed whatever the prereaction conditions at 85 °C, and the equilibrium constant (K) between active and dormant species is 8.7 × 10^?10 mol L^?1 at 110 °C. At this temperature, the dissociation rate constant (k_d) is 3.7 × 10^?3 s^?1, the recombination rate constant (k_c) is 4.3 × 10⁶ L mol^?1 s^?1, whereas the activation energy (E_a,diss.), for the dissociation of the alkoxyamine at the chain‐end is ～125 kJ mol^?1. Importantly, the propagation rate at 110 °C, which does not change significantly with the prereaction time and the PBN/AIBN molar ratio at 85 °C, is higher than that for the thermal polymerization at 110 °C. This propagation rate directly depends on the equilibrium constant K and on the alkoxyamine and nitroxide concentrations, as well. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1219–1235, 2007     

A study of radical polymerization of N-vinylpyrrolidone in the presence of poly(methacrylic acid) templates by DSC

The template polymerization of N-vinylpyrrolidone (NVP) along syndiotactic poly(methacrylic acid) (s1-PMAA) templates has been studied by differential scanning calorimetry (DSC) using the scanning as well as the isothermal technique. The resulting Arrhenius plot covers a temperature range between 65 and 120°C and two parts can be distinguished. Below 80°C the overall activation energy, E_a, and entropy ΔS^≠, are 76 kJ · mol^?1 and ?79 J · mol^?1 · K^?1 respectively, in excellent agreement with previous dilatometric results. These values differ slightly from those of the blank polymerization leading to rate enhancement by a factor of only two. The small difference in activation parameters is explained by the occurrence of desolvation of st-PMAA chains during propagation of the polyvinylpyrrolidone (PVP) radicals along the template. Above 80°C, the decreasing tendency to form complexes between PVP and st-PMAA results in a decreasing template effect and a gradual change of apparent E_a and ΔS^≠ values towards those of the blank polymerization. Similar results were obtained with atactic and isotactic PMAA templates, but smaller rate enhancements were observed due to weaker complex formation.     

1,2-oxazine chemistry—IV : The conformational equilibria in 2,5- and 2,4-dimethyltetrahydro-1,2-oxazines

The synthesis of 2,5-dimethyltetrahydro-1,2-oxazine via 5-methyldihydro-1,2-oxazine and the preparation of a pure sample of 2,4-dimethyltetrahydro-1,2-oxazine are reported. For the 2,5-dimethyl derivative low temperature (?40° to ?45°) ¹H NMR measurements show signals from the trans (95%) and cis (5%) conformations. From this result it follows that an axial 5-Me group in a tetrahydro-1,2-oxazine ring is 5·7 ± 0·4 kJ mole^?1 less stable than when equatorial. Low temperature measurements on the 2,4-dimethyl derivative fail to show any sign of the conformation with an axial Me group. These results in conjunction with earlier relative free energy difference measurements, give the following conformational free energy differences for Me groups on ring C atoms; C(4) 7·1 ± 1·0; C(3) 7·9 ± 0·8; C(6) 10·1 ± 1·6 kJ mole^?1.