Grafting of Polymers onto Activated Carbon Surface: Graft Polymerization of Vinyl Monomers Initiated by Azo Groups That Were Introduced onto the Surface

Abstract

We examined the grafting of polymers onto an activated carbon powder surface by polymerization that was initiated by azo groups that were introduced onto the surface as well as the effects of grafted polymers on the adsorption of acetic acid. The introduction of azo groups onto the surface was achieved by the following methods: (1) a reaction of 4,4′-azobis(4-cyano-pentanoic acid) (ACPA) with surface isocyanate groups that were introduced beforehand by treatment with tolylene 2,4-diisocyanate (AC-Azo 1) and (2) the direct condensation of ACPA with surface phenolic hydroxyl groups by using N,N'-dicyclohexylcarbodiimide (AC-Azo 2). The radical polymerizations of styrene, methyl methacrylate, N,N-diethylacrylamide (DEAM), and N-isopropylacrylamide (NIPAM), were successfully initiated by the azo groups on the surface and the corresponding polymers were grafted onto the surface. There was a significant decrease in the adsorption of the acetic acid of the activated carbons when polymers were grafted onto them, particularly in regards to the grafting of hydrophobic polymers. On the other hand, a decrease in the adsorbability of the polyDEAM-grafted and polyNIPAM-grafted activated carbon was barely observed. In addition, polyDEAM-grafted and polyNIPAM-grafted activated carbons showed temperature-dependent adsorption of acetic acid: the adsorbability of these activated carbon decreased above lower critical solution temperature of these polymers, which is about 32°C.     

Radical Graft Polymerization of Vinyl Monomers Initiated by A20 Groups Introduced Onto a Carbon Black Surface: Effect of azo Groups on Graft Polymerization

The radical graft polymerization of vinyl monomers from carbon black initiated by azo groups introduced onto the surface was investigated. The introduction of azo groups onto carbon black surface was achieved by three methods: the reaction of 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (AIP) with (1) epoxide groups, which were introduced by the reaction of carbon black with chlorometh-yloxirane; (2) acyl chloride groups, which were introduced by the reaction of carboxyl groups on the surface with thionyl chloride; and (3) 3-chloroformyl-1-cyano-1-methylpropyl groups, which were introduced by the reaction of carbon black with 4,4′-azobis(4-cyanovaleric acid) and then thionyl chloride. The amount of azo groups introduced onto the surface by the above methods was determined to be 0.07-0.19 mmol/g. The graft polymerization of methyl methacrylate was found to be initiated by azo groups introduced onto the carbon black surface. During the polymerization, poly(methyl methacrylate) was effectively grafted onto carbon black through propagation of the polymer from the radical produced on the surface by the decomposition of the azo groups. The percentage of grafting using carbon black having azo groups introduced by method 1 increased to 40%. It was also found that the graft polymerization of several vinyl monomers such as styrene, acrylonitrile, and acrylic acid was initiated by the azo groups introduced onto the surface and the corresponding polymer was effectively grafted onto the surface. Furthermore, the effect of the amount of carbon black having azo groups on the graft polymerization was investigated.     

偶氮基团引发PMMA在纳米TiO2表面接枝聚合研究

采用表面接枝反应的方法,在纳米TiO2上接枝偶联剂KH-560,进而通过酯化反应引入偶氮基团引发甲基丙烯酸甲酯发生自由基聚合反应,并通过IR、SEM、TEM、DSC和TG等测试方法研究了反应条件对复合粒子结构和性能的影响.结果表明,反应约60 min时,TiO2表面的接枝率达42.9%;当搅拌速率为1.0×104 r/min时,TiO2均匀分散在PMMA基体中;TiO2粒子的加入使得PMMA的热稳定性有了明显提高.     

Grafting of Polymers from Carbon Fiber. Anionic Graft Polymerization of Vinyl Monomers Initiated by Metallized Aromatic Rings on Carbon Fiber

The anionic graft polymerization of vinyl monomers onto carbon fiber initiated by metallized carbon fiber was investigated. The metalation of polycondensed aromatic rings of the carbon fiber surface was achieved by the treatment of carbon fiber with n-butyl-lithium (BuLi) in N, N, N′, N′ -tetramethylethylenediamine (TMEDA) or hexamethylphosphorous triamide (HMPT) at 0°C. The anionic polymerization of methyl methacrylate (MMA) and styrene (St) was initiated by the metallized carbon fiber, and these polymers were grafted onto the surface. The conversion and the percentage of grafting increased with increasing amount of BuLi used for the metalation of carbon fiber. When 0.20 g carbon fiber was treated with 0.3 mmol BuLi in TMEDA, the percentage of grafting of PMMA and PSt reached a maximum value (PMMA, 34.5%; PSt, 37.1 %). Furthermore, the metalation of aromatic rings of carbon fiber also proceeds by the treatment with BuLi in HMPT. On the contrary, no grafting was observed when carbon fiber was treated with BuLi in tetrahydrofuran (THF) or toluene. This may be due to the fact that metalation of carbon fiber does not proceed in THF or toluene.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Grafting of Polymers onto a Crosslinked Polymer Carrying Carboxyl Groups as a Model Compound for Carbon Black

Abstract

A cation-exchange resin (a crosslinked polymer carrying carboxyl groups) was used as a model compound for carbon black, and the grafting of several polymers to the resin was investigated. Reaction of acyl chloride groups that had been placed on the ion-exchange resin with polymers having hydroxyl or amino groups, such as polypropylene glycol, polyethylene glycol, polybutadiene glycol, polyvinyl alcohol, silicone diol, silicone diamine, and polyethyleneimine, resulted in grafting to the ion-exchange resin. In further experiments, primary amino groups were placed on the cation-exchange resin by reaction of acyl chloride groups with ethylenediamine. It was found that ring-opening polymerization of γmethyl L-glutamate N-carboxyanhydride is initiated by the amino groups on the resin, and polypeptide was grafted from the cation-exchange resin. Therefore, the reactivity of carboxyl groups on the resin was found to be similar to that on carbon black. However, carboxyl groups on the resin failed to initiate the cationic polymerization of vinyl monomers, in contrast to those on carbon black. This suggested that the acidity of carboxyl groups on carbon black is greater than on the cation-exchange resin.     

Surface Grafting onto Barium Sulfate: Polymerization of Acrylamide Initiated by the System Consisting of Alcoholic Hydroxyl Groups on the Surface and Ceric Ion

Abstract

To modify the surface of barium sulfate, the grafting of polymers onto the surface by the polymerization of acrylamide (AAm) initiated by the system consisting of eerie ion and alcoholic hydroxyl groups on the surface was investigated. Barium sulfate modified by 12-hydroxystearate (BaSO₄-HS) was prepared by the reaction of barium chloride with sodium sulfate containing a small amount of sodium 12-hydroxystearate. The presence of 12-hydroxystearate groups on the BaSO₄ surface was confirmed by XPS analysis and infrared spectra. It was found that the graft polymerization of AAm is initiated by the system consisting of eerie ion and BaSO₄-HS to give poly (AAm)-grafted BaSO₄. This indicated that the grafted polymer chains are propagated from surface radicals formed by the redox reaction of eerie ion with 12-hydroxystearate groups on the surface. The polymerization rate (R _p) of AAm initiated by the redox system was given by R _p = k[AAm][Ce(IV)][BaSO₄-HS] where k is constant, [AAm] is AAm concentration, [Ce(IV)] is cerie ion concentration, and [BaSO₄-HS] is BaSO₄-HS concentration. The result suggested that in such an initiating system, the unimolecular termination of growing polymer radicals from the surface of BaSO₄ proceeds preferentially. Furthermore, by grafting of poly(AAm) onto the BaSO₄-HS surface, the wettability of the surface was found to turn from hydrophobic to hydrophilic.     

Grafting of Vinyl Monomers onto Poly(Acryloyl-L-valine) Microspheres Containing Peroxyester Groups

Abstract

Poly(acryloyl-L-valine) microspheres containing peroxyester groups were prepared by copolymerization of acryloyl-L-valine with di-t-butyl peroxyfumarate in acetophenone. Graft copolymerization of some vinyl monomers onto the microspheres was carried out by photolysis or thermolysis of the peroxyester groups in the microspheres. When benzyl methacrylate (BzMA) was used as the second monomer, BzMA conversion and grafting efficiency were found to increase with time. This might be ascribed to long lifetime of the polymer radicals in the microspheres. In fact, the very stable propagating radical of BzMA was observed by ESR in the photoinduced graft copolymerization system of the microspheres and BzMA at room temperature. The copolymerization process was investigated by ESR.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.     

Grafting of Poly(Methyl Methacrylate) onto Poly(Vinyl Chloride) through Benzodithioate Groups

The synthesis and the characterization of poly (methyl methacrylate) (PMMA) grafted to poly(vinyl chloride) (PVC) through benzodithioate groups are studied. Unlike results generally obtained with conventional free-radical initiators for systems involving PVC and MMA, high conversions, and grafting efficiencies are achieved with azobis-isobutyronitrile. The paper describes the synthesis of p-vinylbenzodithioate-containing PVC and the dependence of the characteristics of PVC-g-PMMA on the composition of the reaction mixture. Characterization of the graft copolymers includes UV and IR spectroscopy, GPC, and microstructure analysis by removal of PMMA side chains by aminolysis of dithioesters groups. Intrinsic viscosity, glass transition temperature, and thermal sensitivity were investigated to confirm the grafted nature of the copolymer.     

Grafting of 4-Vinyl Pyridine onto Nylon-6 Initiated by Redox System

The graft copolymerization of 4‐vinyl pyridine (4VP) onto nylon‐6 (PA6) was studied by using potassium diperiodatonickelate(IV) (DPN)‐PA6 redox system in alkaline medium. The structures of graft copolymers were confirmed by Fourier transfer infrared spectroscopy (FTIR) and X‐ray diffraction. The properties of graft copolymers were investigated by thermogravimetric analysis (TGA). A mechanism was proposed to explain the generation of radicals and the initiation. The effects of reaction variables, such as the initiator concentration, the ratio of 4VP to PA6, pH as well as reaction temperature and time were investigated. Graft copolymers with high grafting efficiency (>95%) were obtained, which indicated that DPN‐PA6 redox system is an efficient initiator for this graft copolymerization. The quaternized PA6‐g‐P4VP (QPAVP) was proved to be an excellent adsorbent to heavy metal ions.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

The Electrochemical Grafting of a Mixture of Substituted Phenyl Groups at a Glassy Carbon Electrode Surface

Two‐component substituted aryl groups are simultaneously grafted onto the surface of a glassy carbon electrode by electrochemical reduction of a binary mixture of two aryl diazonium salts in acetonitrile. The electrochemical deposition is achieved potentiostatically and two different mixtures with four different ratios of diazonium salts are used. The binary mixtures comprise: 1) 4‐nitrophenyl diazonium and 4‐bromophenyl diazonium cations and 2) 4‐bromophenyl diazonium and N,N‐diethylaniline diazonium cations. The chemical composition of the two component films is determined by cyclic voltammetry in an electrolyte inert for electroactive groups such as nitrophenyl and bromophenyl. X‐ray photoelectron spectroscopy is also used to evaluate the surface concentration of each grafted substituted phenyl group. The surface concentration of the substituted phenyl group for which the corresponding diazonium cation is the most easily reduced is higher than its concentration in the mixture of the deposition solution. The usefulness of binary films is also discussed.     

Grafting Vinyl Monomers onto Nylon 6 Fiber. IV. Graft Copolymerization of Ethyl Methacrylate onto Nylon 6 Fiber by Photoirradiation

Grafting of nylon 6 fiber was carried out using ethyl methacrylate (EMA) as the monomer in various water-alcohol systems (i.e., water-methanol, water-ethanol and water-n-propanol; water-alcohol ratio 1:1) at 70°C using a carbon arc lamp as the source of photochemical initiation. Percent graft add-on (% GAO) increases continuously and linearly with an increase in monomer concentration irrespective of the media used. The % GAO, however, decreases with an increase in the alkyl chain length of the alcohol used in the following order: water-methanol > water-ethanol > water-n-propanol. With an increase in the time period of grafting, % GAO and total polymer yield (% TPY) increase continuously in all three media whereas the grafting efficiency (GE) first increases and then falls after reaching a maximum level. Although a similar trend is maintained in the three systems, there is a decrease in overall % TPY and % GAO from the water-methanol system to the water-n-propanol system through the water-ethanol system.     

Vinyl Polymerization. 371. Polymerization of Methyl Methacrylate Initiated by the System of Polyvinylferrocene and Carbon Tetrachloride

The polymerization of vinyl monomers initiated with the system of polyvinylferrocene (PVFc) and carbon tetrachloride (CCl₄) was carried out in dark. Methyl methacrylate (MMA) and acrylonitrile (AN) could be polymerized, while styrene (St) was hardly polymerized under the conditions used. The polymerization proceeded through a free-radical mechanism and was concluded to be initiated by attack of vinyl monomer, having a polarized vinyl group, on the charge-transfer complex of PVFc/CCl₄. In the polymerization of MMA, the initiating ability of PVFc was much larger than that of ferrocene (Fc-H) or poly(ferrocenylmethyl methacrylate) (PFMMA) and was comparable to that of polyferrocenylenemethylene (PFM). The overall activation energy was estimated to be 34.2 kJ/mole.     

Grafting Vinyl Monomers onto Nylon 6 Fiber. III. Graft Copolymerization of Vinyl Monomers onto Nylon 6 Fiber in Water Medium in the Presence of Fructose

Nylon 6 fiber was grafted with various vinyl monomers e.g., methyl methacrylate (MMA), ethyl methacrylate (EMA), and n-butyl methacrylate (n-BMA), in water in the presence of fructose using a carbon arc lamp as the source of photoirradiation at 70°C and a liquor ratio of 1:26. The effects of various parameters, e.g., monomer concentration, time of grafting, and fructose concentration on grafting reactions, were studied individually for each monomer. The graft yield is greatly enhanced by increasing the monomer concentration and the time of grafting. However, the optimum fructose concentration is required for maximum grafting efficiency. The accelerating action of photopolymerization by fructose was attributed to the sensitizing action of fructose involving an energy transfer.     

Grafting onto Cellulose. VI. Graft Copolymerization of Vinyl Acetate by Use of Metal Chelates as Initiators

Graft copolymerization of vinyl acetate (VAc) onto cellulose has been studied in an aqueous medium in the presence of Fe(acac)₃, Al(acac)₃, and Zn(acac)₂ as initiators. Percentage of grafting has been determined as a function of concentration of initiators and monomer, reaction time, and temperature. The reactivities of different metal chelates toward grafting of VAc on cellulose have been determined and were found to follow the order: Zn(acac)₂ > Al(acac)₃ > Fe(acac)₃. A plausible mechanism for grafting involving complex formation between metal chelates and vinyl monomer has been suggested. Several grafting experiments were carried out in presence of CCl₄, CHCl₃, CH₃CH₂CH₂SH and Et₃N. All these additives with the exception of Et₃N were found to suppress grafting.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

Grafting Vinyl Monomers onto Tussah Silk Fiber. I. Graft Copolymerization of Methyl Methacrylate onto Nonmulberry Tussah Silk by Tetravalent Cerium Ion

The graft copolymerization of methyl methacrylate onto nonmulberry natural tussah silk fibers was investigated in aqueous solution using tetravalent cerium as initiator. The rate of grafting was determined by varying the monomer concentration, the cerium (IV) concentration, the temperature, and the nature of the silk. With increasing monomer concentration the graft yield increased (up to 0.657 M) and thereafter decreased. The graft yield also increased with increasing cerium (IV) concentration. The graft-on was influenced by chemical modification of the tussah silk prior to grafting. The effect of certain inorganic salts on the rate of grafting was investigated.