Rare earth metal initiated polymerization to give high polymers with narrow molecular weight distribution

Organolanthanide (III) initiated polymerization of alkyl acrylates gave high molecular weight poly(alkyl acrylate)s with extremely narrow molecular weight distribution in high yield. Molecular weight of the polymers increased linearly with the conversion. Random and block copolymerizations of acrylate monomers (alkyl acrylates and MMA) were successful. For development of olefin polymerization catalystsbased on lanthanide complexes, bulky substituents were introduced into Me₂Si bridged Cp rings and they were used as ligands of lanthanide complexes. Tri- and divalent lanthanide complexes with such a ligand system showed high activity for olefin polymerization and gave high molecular weight polyolefins.     

Novel synthesis of high molecular weight polymers with extremely low polydispersity by the unique initiation properties of organo-lanthanide complexes

Organolanthanide(III) complexes such as |(C₅Me5₅)₂SmH|₂ and (C₅Me₅)₂SmMe(THF) were found to initiate the living polymerizations of methyl methacrylate (MMA) to give high molecular weight polymers (M _n > 500 × 10³) with extremely low polydispersity (M _w/M_n = 1.04). The syndiotacticity increased up to 95.2% by lowering the temperature to −95°C. The molecular structure of the 1:2 adduct of (C₅Me₅)₂SmH with MMA determined by X-ray method indicates that this intermediate assumes the 8 membered ring conformation where the Sm atom is bound to MMA in an enolate form and the ester of penultimate MMA is coordinated to the metal. Based upon these results, an anionic coordination mechanism has been proposed for the present reaction. Organolanthanide(II) complexes also exhibit high activity and proceed the living polymerizations. Organolanthanide(III) complexes also initiate the living polymerizations of lactones such as ϵ-caprolactone and δ-valerolactone. The stoichiometric reactions indicate that real active species assumes the alkoxylanthanide(III) form.     

Salicylaldiminato-based cobalt(III)-, iron(III)-, and chromium(III)/methyl aluminoxane catalyst systems for polymerization of <Emphasis Type="Italic">t</Emphasis>-butyl acrylate

A new series of penta-coordinated Co(III)-, Fe(III)-, and Cr(III)- complexes (6–10) bearing N-salicylidineisopropylaniline and sodium N-(4-sulfonitsalicylidineisopropyl-aniline) ligands has been synthesized and utilized, after activation with methyl aluminoxane, as catalysts for the polymerization of tert-butylacrylate (t-BA). High molar mass P(t-BA) polymers with very low molecular weight distributions were produced (M _w/M _n = 1.06–1.09). Cobalt- and chromium-based precatalysts showed higher activity towards the polymerization reaction than those of the iron complexes. The presence of sulfonated groups on the para position of the aryl group in the backbone of the ligand decreases the catalytic activity of the complexes. The ortho alkyl substituents on the aryl groups of the ligand have a favorable influence on the polymerization activity compared to the alkyl-free analogue (11).     

Cover Picture: Journal of the Chinese Chemical Society 2/2012

This article summarizes recent efforts for synthesis and reaction chemistry with (imido)vanadium(V)‐alkyl, ‐alkylidene complexes. These (arylimido)vanadium(V) dichloride complexes especially containing aryloxo ligands exhibited notable activities for ethylene polymerization affording ultra high molecular weight polymers with unimodal molecular weight distribution, and the reacition pathways for the polymerization/dimerization using (imido)vanadium(V) dichloride complexes containing (2‐anilido‐methyl)pyridine ligands can be tuned by modification of the steric bulk in the imido substituents; the adamantylimido analogues exhibited exceptionally high both activity and selectivity in the dimerization. This article entitled “(Imido)Vanadium(V)‐Alkyl, Alkylidene Complexes Exhibiting Unique Reactivities towards Olefins, Phenols, and Benzene via 1,2‐C‐H Bond Activation” was contributed by Prof. Kotohiro Nomura who was invited as a Visiting Lecturer (Mar. 6, 2011 ～Mar. 12, 2011) of the Chemistry Research Promotion Center, Taiwan, R.O.C. For full text, please see pp 139～148 in this issue.     

Stereoregular Polymerization of Alkyl Propiolate Catalyzed by Rh Complex

Abstract

The polymerizations of alkyl esters of propiolic acid by Rh complex catalysts were investigated. [Rh(norbornadiene)Cl]₂, which was the most active among the catalysts examined, gave rise to poly(alkyl propiolate) in a fairly high yield (～80%) in the presence of alcohol as the polymerization solvent. The polymers formed were a pale yellow powder soluble in common organic solvents except for poly(methyl propiolate). The structures of the polymers obtained were investigated by IR, ₁₃C-NMR, CP MAS ₁₃C-NMR, and laser Raman spectroscopies, together with the x-ray diffraction method. Based on these spectroscopic data, it was concluded that this Rh complex can be called a stereoregular polymerization catalyst of alkyl propiolate because the poly(alkyl propiolate) obtained has a cis-transoidal structure.     

Two lanthanide coordination polymers with one-dimensional chain structure constructed from 2,2′-diphenyldicarboxylate

Two lanthanide coordination polymers, [Ln₂(dpdc)₃(H₂O)₂] _n (Ln = Sm 1, Dy 2; dpdc = 2,2′-diphenyldicarboxylate) were prepared by hydrothermal reaction and characterized by elemental analyses, IR spectroscopy, thermogravimetry, fluorescence spectrometry, and single-crystal X-ray diffraction. X-ray studies indicate that the two complexes are isostructural, with two different lanthanide ion nodes linked by dpdc ligands into an infinite one-dimensional chain structure, in which dpdc ligands are bidentate-bridging/bidentate-bridging and bidentate-bridging/chelate-bridging. Complexes 1 and 2 exhibit luminescent characteristics of Sm(III) and Dy(III) ions, respectively.     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,Characterization, Antimicrobial Activities,and Structural Studies of Lanthanide (III) Complexes with 1-(4-Chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1-thiosemicarbazone

Twelve coordinate lanthanide (III) complexes with the general composition [Ln L₃X_n(H₂O)_n] where Ln = Pr(III), Sm(III), Eu (III), Gd (III), Tb (III), Dy (III), X = Cl^?1, NO₃ ^?2, n = 2–7, and L is 1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1- thiosemicarbazone have been prepared. The lanthanide complexes (5) were derived from the reaction between 1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1-thiosemicarbazone (4) with an aqueous solution of lanthanide salt. Chalcone thiosemicarbazone ligand (4) was prepared by the reaction of [1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)]prop-2-enone (chalcone) (3) with thiosemicarbazide in the presence of hot ethanol. All the lanthanide-ligand 1:3 complexes have been isolated in the solid state, are stable in air, and characterized on the basis of their elemental and spectral data.

Thiosemicarbazone ligands behave as bidentate ligands by coordinating through the sulfur of the isocyanide group and nitrogen of the cyanide residue. The probable structure for all the lanthanide complexes is also proposed. The chalcone thiosemicarbazone ligands and their lanthanide complexes have been screened for their antifungal and antibacterial studies. Some of the synthesized lanthanide complexes have shown enhanced activity compared with that of the free ligand.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

A new form of controlled growth free radical polymerization

A new form of controlled growth free radical polymerization leading to narrow polydispersity polymers and/or block copolymers is described. The process is based on the polymerization of monomers in the presence of macromonomers of general structure CH₂=C(Z)CH₂(A)_n [(A)_n= radical leaving group, Z = activating group] and displays many of the characteristics of living polymerizations. The process is most suited to methacrylic monomers but with the appropriate choice of reaction conditions (high temperatures and/or low conversions) it can also be applied to acrylic and styrenic monomers. The macromonomers are conveniently prepared by catalytic chain transfer to alkyl cobalt(III) complexes or by addition-fragmentation chain transfer. The factors which determine the efficiency of cobalt complexes for molecular weight reduction in free radical emulsion and solution polymerization of methyl methacrylate are also discussed.     

Highly heterotactic polymerization of methacrylates — Higher order stereoregulation and stereochemical significance

A combination of tert-butyllithium (t-BuLi) and bis(2,6-di-t-butylphenoxy)methylaluminium (MeAI(ODBP)₂) was found to be an efficient initiator for heterotactic living polymerization of certain alkyl methacrylates in toluene at low temperatures. The polymerization of methyl methacrylate (MMA) with t-BuLi/MeAI(ODBP)₂ (AI/Li=5 mol/mol) in toluene at −78°C gave heterotactic-rich poly(methyl methacrylate) (PMMA) with narrow molecular weight distributions (MWDs) (heterotactic triad fraction mr = 68%, ratio of weight- to number-average molecular weights M̄w/M̄n = 1.06-1.17). Other alkyl methacrylates also gave heterotactic polymers under the same conditions; in particular, ethyl and butyl methacrylates gave polymers with heterotactic triad fractions of 87%. The highest triad heterotacticity of 91.6% was obtained for the polymerization of ethyl methacrylate at −95°C. Some characteristic features of this stereospecific polymerization were discussed based on the polymerization results combined with other structural information of the polymer such as chain-end stereostructure and stereosequence distribution in the main chain.     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Synthesis, characterization of homoleptic guanidino lanthanide complexes and their catalytic activity for the ring-opening polymerization of ε-caprolactone

A series of homoleptic lanthanide guanidinate (guan)₃Ln · ((C₂H₅)₂O)_n (Ln=Yb, n=1 guan=(CyN)₂CNiPr₂, (1); Ln=Nd, n=0, guan=(CyN)₂CNiPr₂, (2); (iPrN)₂CNiPr₂, (3); (iPrN)₂CN(CH₂)₅, (4)); (iPr=isopropyl, Cy=Cyclohexyl) were synthesized by the reaction of THF solution of lithium guanidinate with anhydrous lanthanide trichlorides in THF in 3:1 molar ratio. The molecular structures of 2 and 3 were determined to be monomeric in solid state with a six coordinate lanthanide metal ligated by six nitrogens of three guanidinate groups. All the complexes exhibited extremely high activity for the ring-opening polymerization of ε-caprolactone and the polymerization gave the polymers with high molecular weights. The different substituents at guanidino ligands have great effect on the catalytic activity. The mechanism of the polymerization was presented.     

The Stronger the Better: Donor Substituents Push Catalytic Activity of Molecular Chromium Olefin Polymerization Catalysts

The donor strength of bifunctional pyridine-cyclopentadienyl ligands was altered systematically by the introduction of donating groups in the para-position of the pyridine. In the resulting chromium complexes an almost linear correlation between donor strength and the nitrogen-chromium distance as well as the electronic absorption maximum is experimentally observed. The connection of electron-donating groups in the ligand backbone leads to an efficient transfer of the electronic influences to the catalytically active metal centre without restricting it through steric effects. Therefore, catalytic olefin polymerization activity, which is already very high for the previously studied catalysts, increase considerably by attaching para-amino groups to the chelating pyridine or quinoline, respectively. Combining electron-rich indenyl ligands with para-amino substituted pyridines lead to the highest catalytic activities observed so far for this class of organo chromium olefin polymerisation catalysts. The resulting polymers are of ultra-high molecular weight and the ability of the catalysts to incorporate co-monomers is also very high.     

Aldimine 2,6-bis(imino)pyridine iron(II) and cobalt(II)/methyl aluminoxane catalyst systems for polymerization of <Emphasis Type="Italic">tert-</Emphasis>butylacrylate

Aldimine 2,6-bis[(imino)methyl]pyridine iron(II) (1, 4, and 6) and cobalt(II) (3 and 5) complexes bearing bulky cycloaliphatic (bornyl and myrtanyl) or aromatic (naphthyl) terminal groups have been applied successfully, after activation with methyl aluminoxane (MAO), as catalysts for the polymerization of tert-butylacrylate. For comparison reasons, complex 2 that contains the ketimine ligand, 2,6-bis[(−)-cis-myrtanylimino)ethyl]pyridine (BMEP), has also been utilized. All studied complexes showed moderate polymerization activities, and they produced high molar mass syndiorich-atactic polymers. Surprisingly, the aldimine-based catalyst systems showed comparable activities compared with the corresponding ketimine complex (2), and they produced high molar mass polymers. In addition, complexes with bulky terminal cycloaliphatic substituents on the tridentate aldimine ligands showed higher polymerization activity compared with the aromatic ones (6). Polymerization activity and polymer molar masses are dependent on the ligand framework.     

Controlled radical polymerization of alkyl acrylates and styrene using a half-sandwich molybdenum(III) complex containing diazadiene ligands

The half-sandwich molybdenum(III) complex CpMoCl₂(ⁱPr₂-dad) (ⁱPr₂-dad=ⁱPr-NCH-CHN-ⁱPr) proved to be an effective metal catalyst for the controlled radical polymerization of methyl acrylate, butyl acrylate, and styrene. In conjunction with an alkyl iodide [R-I: CH₃CH(COOEt)I] as an initiator and in the presence or absence of Al(O-i-Pr)₃ as a co-catalyst, the molybdenum-based system gave polymers with narrow molecular weight distributions. The in situ addition of styrene to a macroinitiator of poly(methylacrylate) afforded an AB-type block copolymer.     

Lanthanide borohydride complexes with an aryloxide ligand: Synthesis, structural characterization and polymerization activity

Reactions of LnCl₃, NaBH₄ and ArONa (Ar = C₆H₂-t-Bu₃-2,4,6) in a molar ratio of 1:3:1 in THF afforded the aryloxide lanthanide borohydrides of (ArO)Ln(BH₄)₂(THF)₂ (Ln = Yb (1), Er (2)). They were characterized by elemental analysis, infrared spectrum and X-ray crystallography. The two complexes are neutral and isostructural. The lanthanide atom is nine-coordinated by an aryloxide ligand, two borohydride ligands and two THF ligands in a trigonal bipyramidal geometry. Both of the BH₄ ligands in each monomeric complex are η³-coordinated. These complexes displayed moderate high catalytic activities for the polymerization of methyl methacrylate. The polymerization temperature had great influence on the catalysis. At about 0 °C, the catalysts showed the polymerization activity best.     

Synthesis of star- and block-copolymers using ADMET: head-to-tail selectivity during step-growth polymerization

Control over molecular architectures obtained via ADMET polymerization is limited by the step-growth nature of this technique. A new approach to this polycondensation method is described allowing for the synthesis of diblock and star-shaped polymers with molecular weight control by using the selectivity of olefin cross-metathesis between acrylates and terminal olefins.     

Polymerization of p‐diethynylbenzene and its derivatives with nickelocene acetylide catalysts containing different phosphine and alkynyl ligands

We developed a new series of single‐component air‐ and moisture‐stable catalysts for alkyne polymerization based on nickelocene complexes containing phosphine and alkynyl ligands. Chlorine, phosphine and alkynyl ligands exhibited great influence on the catalytic activity of the nickelocene complexes. Highly soluble polymers with fairly high molecular weight (M_w 23 400) were obtained in high yields (85%) in the homogeneous polymerization of p‐diethynylbenzene initiated with five nickelocene acetylides (π‐C₅H₅)LNi(C≡CR) (L = PPh₃, PBu₃; R = p‐C₆H₄C≡CH, C₆H₅, H) under mild conditions.     

Polymerization catalysis with transition metal amidinate and related complexes

Applications of transition metal amidinate [RC(NR′)₂], guanidinate and amidopyridine complexes to olefin coordination polymerization are reviewed. In addition, the use of complexes, featuring closely related ligands, such as phosphonamide or iminophosphonamide [R₂P(NR′)₂], in olefin polymerization is highlighted. Some of these complexes have also been investigated in the stereoregular polymerization of styrene and conjugated dienes, whereas more recent work has focused on controlled ring-opening polymerization of lactones and lactides.