Caesium salts of titanium,zirconium and thorium cyanoferrates(II)

The synthesis of cyanoferrates of quadrivalent metals and the sorption of caesium ions by these materials have been studied. It has been found that the compositions of the compounds and their properties are strongly influenced by the degree of hydrolysis of the metal. These is no sorption of caesium by Zr⁴⁺ and Th⁴⁺ cyanoferrates, while the compounds of oxygencontaining bivalent complex cations exhibit behaviour similar to that of the other bivalent metals. The sorption of caesium by (TiO)₂R is govermed by an ion-exchange mechanism; with (ZrO)₂R changes occur in the crystal lattice, and (ThO)₂R exhibits a low affinity towards caesium.     

A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications

The potential of ⁴⁰K as a radioactive tracer analogue of ¹³⁷Cs in ion exchange experiments is reported. Solutions of varying concentrations of potassium chloride (KCl) have been monitored radiometrically in a sodium iodide well-counter to determine the activity-concentration relationship. Ion exchange reactions using an exemplar ion exchange resin, KCl and non-radioactive caesium chloride (CsCl) solutions have been studied radiometrically. The adsorbed amounts of potassium and caesium are observed, inferred from displaced K⁺ ions, to be consistent with the total exchange capacity of the resin. Adsorption isotherm models have been applied to the experimental data, with the Freundlich isotherm observed to fit the data with the highest degree of consistency. The reported results indicate that decontamination techniques involving hazardous isotopes of anthropogenic origin such as ¹³⁷Cs can be developed, evaluated and optimised by substituting a chemically and physically similar non-hazardous radioactive isotope, in this case ⁴⁰K. This represents a means by which innovative decontamination techniques and regimes might be identified without the need to use ¹³⁷Cs and thus avoids additional generation of radioactive wastes.     

Analysis of carbohydrates by fast atom bombardment mass spectrometry: 2—Influence of the matrix and the nature of the alkaline cations in the attachment process of an alkaline cation to a disaccharide molecule

The fast atom bombardment (FAB) ionization process of a non-reducing disaccharide by an attachment reaction with an alkaline cation has been investigated according to the nature of both the matrix (glycerol, diethanolamine, triethanolamine) and the alkaline cation (lithium, sodium, potassium, rubidium, caesium). We have established that one way of forming the cationized disaccharide molecular ions, [disaccharide-cat]⁺, is by a desolvation reaction from the cationized solvated disaccharide molecular ions, [disaccharide-cat-matrix]⁺. This process, which has been established by mass-analysed ion kinetic energy (MIKE) spectral analysis of the solvated species, is shown to be drastically affected by the nature of the involved matrix but only slightly by the alkaline cation. The variations in the relative abundances of the disaccharide cationized molecular ions compared to their solvated clusters in the FAB mass spectra, due to the matrix employed, have been explained according to the unimolecular dissociation of the solvated clusters examined by MIKE analysis. However, the variations in the abundance of the disaccharide cationized molecular ions in relation to the alkaline cation used—a higher sensitivity has been observed for lithium, sodium and potassium alkaline cations—have been explained in terms of the cations available at the target surface for the attachment process to the sugar molecule, and by a ligand exchange reaction between the matrix and the disaccharide.     

Preparation and properties of some salts of perfluorooctanoic acid

The sodium, potassium, lithium, caesium, barium, calcium, silver, lead and ammonium salts of perfluorooctanoic acid were prepared. Their thermal stabilities, and some spectroscopic data are reported. An attempt is made to correlate some of these measurements with the properties of the metal ions or metals concerned.     

Adsorption and radiochemical separation of caesium(I) using zirconium phosphate ion exchanger

A rapid and selective method has been developed for the separation of caesium(I) from other metal ions by adsorbing it on zirconium phosphate ion exchanger. Various parameters involved in the quantitative adsorption of caesium(I) on the ion exchanger have been evaluated employing¹³⁷Cs as a tracer.     

Determination of caesium-137 in water samples using modified carbon microfibers

In this paper, the possibility of caesium sorption on microfibres produced by the Slovak Academy of Sciences was investigated. Sorption capacity limit of sorbent was increased by chemical modification. The binding of Cs to the surface of potassium copper ferrocyanide modified carbon microfibers was demonstrated by SEM–EDX analysis. Statistical comparison of the models showed that the Freundlich isothermal model was more suitable for describing sorption processes. The influence of desorption, pH value, competing ions and water volume were also tested. According to the results, this method seems to be suitable for large-scale caesium separation from contaminated waters.

     

Bis(naphthol)-based fluorescent chemoprobe for cesium cation and its immobilisation on silica nanoparticle as a high selective adsorbent

Abstract

A bis(naphthol)-based cation receptor 1 has been synthesised by three steps of synthetic procedure. The spectroscopic properties of 1 upon addition of various metal ions were investigated by UV–vis absorption and fluorescence spectroscopy. As a result, the absorption of 1 was linearly decreased as a function of concentration of added Cs⁺. Also, 1 exhibited dramatic fluorescence quenching effect upon exposure to caesium cation. Contrastively, no significant quenching effect was observed upon addition of other metal ions such as Na⁺, K⁺, Rb⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ni²⁺ and Zn²⁺. It was found that 1 formed a 1:1 complex with Cs⁺ by Job’s plot. Furthermore, we also prepared 1-functionalised silica nanoparticle (SiO₂-1) as an adsorbent for Cs⁺. SiO₂-1 showed a great capacity for selective removal of caesium ion from aqueous solution as well as from tap water. Thus, it is potentially useful for the detection and removal of caesium cation from environmental and biological fluids polluted by nuclear radiation and nuclear waste.     

Viscosity of Aqueous Solutions of Lithium,Sodium, Potassium,Rubidium and Caesium Cyclohexylsulfamates from 293.15 to 323.15 K

The viscosities of aqueous solutions of lithium, sodium, potassium, rubidium and caesium cyclohexylsulfamates were measured at 293.15, 298.15, 303.15, 313.15 and 323.15 K. The relative viscosity data were analyzed and interpreted in terms of the Kaminsky equation, η _r=1+Ac ^1/2+Bc+Dc ². The viscosity A-coefficient was calculated from the Falkenhagen-Dole theory. The viscosity B-coefficients are positive and relatively large. Their temperature coefficient ∂ B/∂ T is negative or near zero for lithium and sodium salts whereas for potassium, rubidium and caesium salts it is positive. The viscosity D-coefficient is positive. This was explained by the size of the ions, structural solute–solute interactions, hydrodynamic effect, and by higher terms of the long-range Debye-Hückel type of forces. From the viscosity B-coefficients the thermodynamic functions of activation of viscous flow were calculated. The limiting partial molar Gibbs energy of activation of viscous flow of the solute was divided into contributions due to solvent molecules and the solute in the transition state. The activation energy of the solvent molecules was calculated using the limiting Gibbs energy of activation for the conductance of the solute ions. The activation energy of the solvent molecules was then discussed in terms of the nature of the alkali-metal ions and their influence on the structure of water. The limiting activation entropy and enthalpy of the solute for activation of viscous flow were interpreted by ion-solvent bond formation or breaking in the transition state of the solvent. The hydration numbers of the investigated electrolytes were calculated from the specific viscosity of the solutions.     

Alkali metal and ammonium cation–arene interactions with tetraphenylborate anion

Sodium, potassium, rubidium, caesium, ammonium and tetramethylammonium tetraphenylborates were studied by both positive and negative ion electrospray mass spectrometry. An affinity order of Cs⁺ > Rb⁺ > K⁺ ～ Na⁺ was obtained. The results obtained were compared with both calculations and solid-state structures, where available. The previously reported high affinity of caesium for tetraphenylborate concluded from NMR experiments was confirmed for the gas phase. The affinity does not appear to result from steric effects and a cation–pi interaction seems likely. In the positive ion mode, a unique acetonitrile complex of NaBPh₄ was observed.     

CsC2H: Synthese,Kristallstruktur und spektroskopische Eigenschaften

CsC₂H: Synthesis, Crystal Structure, and Spectroscopic Properties CsC₂H was synthesised by the reaction of caesium solved in liquid ammonia with acetylene. The crystal structure could be solved and refined from X‐ray and neutron powder diffraction data (space group: R3c, Z = 18). The structure is characterised by C₂H^– trimers which are surrounded by caesium ions. Spectroscopic investigations (IR and Raman) of the stable monoalkalimetal acetylides mainly confirm the data given in the literature and show that the alkalimetal cation has a marked influence on the vibrational properties of the C₂H^– anion.     

Preparation and properties of tetramethyl-dipicrylamine

Tetramethyldipicrylamine has been synthesised. It gives precipitates with ammonium, potassium, rubidium and caesium ions, that vary widely in crystalline form and offer a possibility of qualitative usage in chemical microscopy. The potassium salt is of sufficiently low solubility to be of analytical interest.     

Production of Polyether Polyols Using Phosphate Calcium Salt

The synthesis of bifunctional polyols using glycerol phosphate calcium salt hydrate as initiator and caesium hydroxide and potassium tert-butoxide as catalyst by means of anionic polymerization was achieved. If a phosphate salt is used as initiator, this reaction allows us to obtain polyols with phosphate groups in its structure not previously described. The relationship to catalyst type was also studied. The kinetic studies revealed that there was a linear relationship between the propylene oxide consumption and time. Both the polydispersity indexes of the polyol and the reaction time decreased using caesium hydroxide instead of potassium tert-butoxide under the same synthesis conditions. The incorporation of phosphorus in the polyol chain was confirmed by MALDI-TOF spectra and ³¹P-NMR spectra. GPC analyses showed an additional small peak in the product, attributed to the allyl adduct. The purification procedure of polyether polyols was also studied by means of liquid-liquid extraction, desorption and ion exchange.     

含嘧啶环的双冠醚——Ⅲ.用双冠醚作载体的PVC膜离子选择性电极性质的研究

合成了九种用嘧啶环桥联的新的双冠醚,其中分别含有苯并-12-冠-4、(1、47)、苯并-15-冠-5(2、5、8)和苯并-18-冠-6(3、6、9 )。用它们作为载体分别制成钠、钾和铯离子选择性电极,测定了电极的选择性系数。结果表明,电极(7)(8)(9)具有较好的性能。     

The formation of thymidine-based T-tetramers with remarkable structural and metal ion size effects

We present direct ESI Q-TOF MS and X-ray evidence for remarkable structural and metal ion size effects on the formation of thymidine-based T-tetramers. The conventional H-bond acceptors on the ribose and deoxyribose may disfavor the formation of T-tetramers, and in the series of alkali metal ions, lithium did not induce T-tetramer due to its small ion size. Sodium, potassium, rubidium and caesium could produce thymidine-based T-tetramers. Furthermore, rubidium and caesium could induce T-pentamers and dimeric T-pentamers probably due to their larger ion sizes.     

Composite absorbers of inorganic ion-exchangers and polyacrylonitrile binding matrix

Maximum attainable self-absorption dose for cemented composite ion-exchanger, consisting of nickel hexacyanoferrate and polyacrylonitrile binding matrix, loaded with¹³⁷Cs up to repository acceptable level (1.1·10¹² Bq·m^–3) was calculated to be 10⁵ Gy. The cemented absorber with sorbed caesium was irradiated by⁶⁰Co source up to 1 MGy, and leach tests were performed to determine possible influence of self-irradiation on the caesium leachability. No radiation induced changes in caesium immobilisation in solidified ion-exchanger were observed.     

Quantification of SIMS depth profiles of ODS-superalloys by using cluster ion formation from reactive primary ions

Cluster ion formation, with both oxygen and caesium as reactive elements, (MO^– and MCs⁺ ions) has been studied using secondary ion mass spectrometry. A comparison of various primary ion beam conditions is given. The investigations were carried out on aluminium oxide films and required a special charge compensation method. An improvement in the quantification concentration by use of cluster ions can only be expected from MCs⁺ measurements; however the total ionization probabilities still depend on matrix composition.     

The thermal decomposition of alkali metal formates

The thermal decompositions of lithium, sodium, potassium, rubidium and caesium formates were investigated by a complex dynamic thermoanalytical method. The ratio of the products in reactions resulting in alkali metal carbonates and oxalates depended variously on the atmosphere used. Differences were found compared to isothermal investigations, in that the catalytic effects of bases could not be observed and the oxalate-conversion was lower. The formation of oxalate did not occur in the cases of lithium and caesium formates; the order for the other salts was sodium formate < potassium formate > rubidium formate.     

Indirect voltammetric determination of potassium and caesium and direct amperometric determination of potassium with tetraphenylborate using silicone rubber based graphite electrodes

Summary The electrochemical oxidation of tetraphenylborate ions was investigated by using silicone rubber based graphite electrode. An indirect voltammetric method was elaborated for the determination of potassium and caesium. A method is also given for the determination of potassium with sodium tetraphenylborate by using amperometric end-point indication. The latter method is more accurate. The relative standard deviation is ± 0.85%.

---

Indirekte voltammetrische Bestimmung von Kalium und Caesium und direkte amperometrische Bestimmung von Kalium mit Tetraphenylborat unter Verwendung von Silicongummi-Graphitelektroden

Zusammenfassung Die elektrochemische Oxydation des Tetraphenylborat-Ions wurde mit Hilfe von Silicongummi-Graphitelektroden untersucht. Eine indirekte voltammetrische Methode zur Bestimmung von Kalium und Caesium, sowie ein Verfahren zur Bestimmung von Kalium mit Natriumtetraphenylborat unter amperometrischer Endpunktsanzeige wurden entwickelt. Das amperometrische Verfahren ist genauer. Die relative Standardabweichung beträgt ± 0,85%.

     

Direct fission versus sequential evaporation mechanism of sputtered caesium iodide cluster ions

A triple stage hybrid mass spectrometer was scanned for the trapping of the reaction intermediates of the over-all loss of two CsI-moieties from size-selected caesium iodide cluster ions of the general formula Cs (CsI)⁺ _n . In addition to appropriate MS/MS/MS-methods an electrically floated collision cell has been applied to trap intermediates of unimolecular and collision-induced evaporations. In comparison with other experimental findings the features of the evaporation mechanism are discussed.     

Novel applications of dipicrylamine as an extractant in the determination of alkali metals

A ten-stage mixer-settler type extraction procedure has been used for the preparation of rubidium-free caesium salts. A nitrobenzene solution of (0.11M CsDPA flows counter to a purified aqueous solution of 0.05M CsCl and 10(-3)M Cs(4)(EDTA), which removes Rb, K, Na and most other metals from the organic phase. An extraction colorimetric titration procedure for 0.2-2 mg of caesium is described, and also an indirect method for determination of potassium and sodium in admixture, based upon the difference in the ability of the two ions to replace (137)Cs(+) in a nitrobenzene solution of dipicrylaminate.