Synthetic and NMR Studies on Calix[n]Arene (n = 4,6,8) Triflates,Mesylates, and Tosylates

Abstract

The synthesis and full characterization of eight new calix[n]arene sulfonate esters including their conformational analysis were carried out. While p-tBucalix[6]arene and p-tBu-calix[8]arene esters are conformationally labile in the temperature interval of 25–100°C, p-tBu-calix[4]arene mono-and diesters were isolated as stable conformers at ambient temperature. Two 1,3-functionalised compounds of these derivatives, p-tert-butylcalix[4]arene ditriflate (5) and dimesylate (6) were shown unexpectedly high conformational stability up to 100°C by dynamic NMR measurements. The NMR measurements confirm the pinched-cone conformation for both derivatives. For the dealkylated calix[4]arene derivatives the partial cone conformer of the triesters have been obtained as major products in all cases.     

Conformations and Structures of Two Novel Upper Rim Disubstituted Derivatives of Tetra-O-alkylcalix[4]arene: The Effect of Substituents

Two new calix[4]arene derivatives, 5,17-dinitro-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (4) and 5,17-diamino-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (5), have been synthesized and fully characterized. The ¹H NMR spectra measured in different solvents and temperatures indicated that the dominant conformer is partial cone for 4 and cone for 5, though there are some variations in relative ratio of partial cone to cone conformers. The structures of partial cone 4 and cone 5 are determined by X-ray crystallography. The different conformational behavior in compounds 4 and 5 is governed by the two substituents at the upper rim. The repulsion of the dipole due to the p-nitro substituents and weak interaction between methoxy group and the inverted anisole ring in the 4 may be responsible for stabilizing the partial cone conformation.This revised version was published online in July 2005 with a corrected issue number.     

Novel Synthesis and Characterization of N‐Substituted‐calix[4]azacrown Derivatives

Novel calix[4]azacrown derivatives from the reaction between calix[4]amidocrown and the different N‐(4‐bromoacetamidephthalimido)alkanes derivatives, which may be useful intemediate compounds of pseudorotaxane, have been synthesized and structurally characterized by IR, ¹H NMR, ¹³C NMR, MS, and elemental analyses. From their analysis data, it was found that compounds 6a–d adopted a cone conformation.     

Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

Solution and X-Ray Crystal Structures of the Di- and Tetra-allyl Ether of tert- utylcalix[4]arene

The di- and tetra-allyl ethers of tert-butylcalix[4]arene 1 and 2 have been prepared by alkylation of tert-butylcalix[4]arene with allyl bromide and K₂CO₃ using different reaction times. Solution ¹H NMR measurement of the di-allyl ether 1 and X-ray crystal structures of the complexes of 1 with chloroform (1a) or methanol (1b) indicate the cone conformation of 1 in which intramolecular hydrogen bonding can be maximized. The crystalline state conformers 1a and 1b are distorted in different grades depending on the solvent. While methanol is incorporated in the macrocycle, chloroform molecules do not occupy the cage. The solution ¹H NMR spectra of tetra-allyl ether 2 show the co-existence of the cone and partial cone conformation. The partial cone conformer of 2 was investigated by X-ray crystallography. In this compound hydrogen bonding is not existent. The conformer distribution is likely affected by steric and template effects.     

Novel Triphenylamine Appended 1,3-Alternate-Calix[4]arenes: Synthesis and Characterization

In the present study, two novel calix[4]arene receptors containing triphenylamine units in 1,3-alternate conformation have been synthesized and characterized in detail. First, the 25,27-dipropoxy-26,28-bis[(3-aminopropyl)oxy]-calix[4]arene 4 and 25,26,27,28-tetra[(3-aminopropyl)oxy]-calix[4]arene 7 were prepared by using convenient reagents. Then, these amino derivatives of calix[4]arene were converted to Schiff base derivatives appended to triphenylamine of calix[4]arene (5 and 8) using 4-formyltriphenylamine via condensation. The 1,3-alternate conformation of the synthesized calix[4]arenes was determined by ¹H and ¹³C NMR analyses. Also, their structures have been characterized by using ¹H and ¹³C NMR, infrared, and elemental analyses.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

基于金属复分解闭环反应合成新型杯[4]冠醚衍生物

杯[4]芳烃的上端和下端通过金属复分解闭环反应以较高产率合成一系列新型杯[4]冠醚衍生物(8a-c),目标产物结构经元素分析、IR、MS、1H NMR及13C NMR证实。     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.     

Complexation and Transport of Alkali and Alkaline Earth Metal Cations by p-tert-Butyldihomooxacalix[4]arene Tetraketone Derivatives

The binding properties of three p-tert-butyldihomooxacalix[4]arene tetraketone derivatives (tert-butyl 2b, adamantyl 2c and phenyl 2d) in the cone conformation and one derivative (methyl 2a) in a partial cone conformation, towards alkali and alkaline earth metal cations have been established by extraction studies of metal picrates from water into dichloromethane, stability constant measurements in methanol and acetonitrile, and by ¹H NMR spectrometry. Transport experiments of metal picrates through a dichloromethane membrane were also performed. The results are compared to those obtained with closely-related calix[n]arene derivatives (n = 4 and 5) and discussed in terms of the substituents, size and conformational effects. Methylketone 2a is a poor binder for all the cations studied, due to its partial cone conformation. Ketones 2b, 2c and 2d show high extraction and complexation levels for the alkali cations, with similar profiles and preference for K⁺ and Na⁺ (plateau selectivity). Towards alkaline earth cations, these ketones show a strong peak selectivity for Ba²⁺ in extraction, but a plateau selectivity for Ca²⁺, Sr²⁺ and Ba²⁺ in complexation. The nature of the substituent attached to the ketone function has some influence on their binding properties, with phenylketone 2d being a slightly weaker binder than ketones 2b and 2c. ¹H NMR titrations confirm the formation of 1:1 complexes between the ketones and the cations studied, also indicating that they should be located inside the cavity defined by the phenoxy and carbonyl oxygen atoms. Ketones 2b, 2c and 2d show transport rates that do not follow, in general, the same trends observed in extraction and complexation.     

Conformational analysis of 3-borabicyclo[3.3.1]nonane derivatives

Conformations of 3-borabicyclo[3.3.1]nonane derivatives have been studied by means of ¹H and ¹³C NMR spectroscopy. With the aid of the coupling constants ³J(HH) and ¹³C chemical shifts it has been shown that all the derivatives of 3-borabicyclo[3.3.1]nonane with the trigonal boron atom studied are in a flattened double-chair conformation. In 3-borabicyclo[3.3.1]nonane derivatives with the tetra-coordinated boron atom and substituents at the 7α-position, the chair-boat conformation predominates, the boat conformation being characteristic of the cyclohexane ring; exceptions are the compounds with the internal donor—acceptor bond between the boron atom an 7α-substituent.     

单氧代-二硒烷基-1, w-二氧取代杯[4]衍生物的合成,结构及萃取性能研究

Novel macrocyclic monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a were synthesized by the reaction of calix[4]arene dibromides 1-5 with the disodium salt of bis（2-selenylethyl）ether in the yields between 28% and 64%. Their structures were characterized by proton and carbon NMR spectra. X-Ray structure analysis of la further confirmed the cone conformation of compounds 1a-5a. An interesting host-guest complex of la with dichloromethane via CH/π and C1/π interactions was elucidated. Extraction experiments showed that these novel monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a had strong extraction ability towards mercury ion. The interaction of Hg^2＋with the calix ligand has also been investigated by 1^H NMR titration.     

Novel Synthesis and Characterization of 1,3‐Bis(2‐dihydrothiazolyl)thiaalkoxy‐p‐tert‐butylcalix[4]arenes

A novel series of 1,3‐bis(2‐dihydrothiazolyl)thiaalkoxy‐p‐tert‐butylcalix[4]arenes generated by the reaction between 4,5‐dihydrothiazole‐2‐thiol and the different dibromide calix[4]aryl groups have been synthesized and structurally characterized by IR, ¹H NMR, ¹³C NMR, and MS. From their analytical data, it was found that compounds 8, 9, and 10 had cone conformations, whereas compound 11 existed as a mixture conformation. To verify the structure of the synthetic compounds, a single‐crystal X‐ray structure of compound 8 was obtained.     

Complexation and DFT studies of lanthanide ions by (2-pyridylmethoxy)homooxacalixarene derivatives

The binding of lanthanide cations by 2-pyridylmethoxy derivatives of p-tert-butyldihomooxacalix[4]arene (1b), in the cone conformation, and p-tert-butylhexahomotrioxacalix[3]arene (2b), in both cone and partial cone conformations, was studied. These properties were assessed by extraction studies of the metal picrates from water into dichloromethane and stability constant measurements in methanol and acetonitrile, using spectrophotometric and microcalorimetric techniques. Proton NMR titrations with La³⁺ and Yb³⁺ cations were done in order to get information on the binding sites. Computational methods (density functional theory (DFT) calculations) were also used to complement the NMR data. The p-tert-butylcalix[4]arene analogue (3b) was also studied, and the results of the four ligands were compared. Partial cone-2b is the best extractant for lanthanide ions, showing some preference for the heavy lanthanides. In complexation, all four ligands show the same trend and a high selectivity for Yb³⁺ (ML, log β ≥ 7). Besides the formation of ML complexes, ML₂ species were also obtained. In most cases, these species were corroborated by the proton NMR studies. For partial cone-2b with Pr³⁺ the complexation process is enthalpically driven, whereas for 3b the formation of the ML₂ species with this cation is due to a favourable entropy term. DFT studies indicate that ligand 3b forms the most stable complex with La³⁺, followed by partial cone-2b.     

SYNTHESIS,REACTIVITY AND CONFORMATION OF 10,11-DIHYDRODIBENZO-[b,f]PHOSPHEPIN AND DIBENZO[b,f]PHOSPHEPIN DERIVATIVES. PHOSPHORUS ANALOGUES OF IMINOBIBENZYL ANTIDEPRESSANTS

Abstract

Derivatives of the novel dibenzo[b,f]phosphepin system are prepared from 10,11-dihydro-5-phenyl-5H-bibenzo[b,f]phosphepin 5-oxide (2). New members in the 10,11-dihydro-5H-dibenzo[b,f]phosphepin series, including phosphorus analogues (7, 10) of the andidepressant drug imipramine (30), are also reported. Products of nucleophilic substitution at tetrahedral phosphorus in 2 appear to be determined by the relative apicophilicity of the nucleophile. Conformational analysis based on ¹H NMR data suggests folded (“butterfly”) conformation for the tricyclic compounds. The twisted boat conformation of the central ring in the 10,11-dihydro compounds bears a pseudo-equatorial P[dbnd]O oxygen or a P[dbnd]S sulfur, in solution. Symmetric AA‘BB’ spin systems are found in 4,5 and 7, and their solution conformations appear to be similar to those of analogous 10,11-dihydrodibenzo[b,f]azepine derivatives. The interaction of some compounds with NMR shift reagents and their mass spectral fragmentations are discussed.     

Synthesis and evaluation of deep cavity imidazolyl calix[n]arenes

A series of deep cavity diphenyl imidazolyl calix[n]arenes (4, 6, 8) have been obtained from readily available starting materials through a five step synthetic methodology involving appropriate alkylation of lower rim of preformed calixarene, formylation of the upper rim and subsequent condensation with aryl diketones in the presence of ammonium acetate and glacial acetic acid. Optimized reaction conditions for obtaining the titled derivatives in their cone configuration and their characterization by spectroscopic methods (IR, UV, NMR and FAB mass) have been delineated. The synthesized imidazolyl calixarenes have preliminarily been examined for selective recognition of monovalent metal ions (Li⁺, Na⁺, K⁺, Cs⁺, Ag⁺).     

Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

六～八元瓜环与咪唑[4,5-f]-1',10'-菲咯啉衍生物的相互作用

合成了2-苯基-咪唑[4,5-f]-1',10'-菲咯啉和对二甲氨基-2-苯基-咪唑[4,5-f]-1',10'-菲咯啉两种咪唑[4,5-f]-1',10'-菲咯啉衍生物, 并经过一、二维核磁共振谱以及质谱方法的验证. 利用¹H NMR、质谱以及紫外可见分光光度法, 考察了以六～八元瓜环为主体, 咪唑[4,5-f]-1',10'-菲咯啉衍生物为客体的作用体系, 以及形成的主客体包结配合物的结构特征. 研究结果表明: 三种瓜环均与2-苯基-咪唑[4,5-f]-1',10'-菲咯啉发生相互作用, 客体以较小的苯基一端穿过瓜环内腔直至苯基部分和菲咯啉部分分别露置在瓜环的两个端口外, 特别是八元瓜环能容纳两个客体分子. 而对二甲氨基-2-苯基-咪唑[4,5-f]-1',10'-菲咯啉仅能与七及八元瓜环相互作用, 作用模式与前者相同.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.