含氮鎓阴离子受体的研究进展

含氮鎓阴离子受体是目前阴离子识别领域研究的热点之一,此类受体具有主体结构修饰的灵活性和多样性,能更好的发挥氢键、疏水作用、静电作用、π-π作用、阴离子-π作用的协同效应等优点。本文详细评述了咪唑鎓和吡啶鎓两类含氮鎓受体的设计、结构及其阴离子识别作用的研究进展。     

含吡啶鎓阳离子的阴离子受体的研究进展

本文综述了近年来含吡啶鎓阳离子受体在阴离子识别领域的研究进展。系统阐述了以吡啶鎓阳离子为主要识别位点的环状、非环状和互锁型阴离子受体的设计合成以及在阴离子识别领域的应用。     

含脲苯并咪唑类离子液体的合成及阴离子识别性能

设计并合成了含脲苯并咪唑离子液体受体分子1~3, 利用紫外-可见光谱、 荧光光谱和 ¹H NMR滴定研究了其对F^-, Cl^-, Br^-, I^-, CH₃COO^-, HSO₄^-, H₂PO₄^-等阴离子的识别性能. 紫外-可见光谱研究发现, 受体分子1~3可选择性地识别F^-, 并形成1: 1型主客体配合物; 荧光光谱研究发现, 受体分子1~3对碱性阴离子有较好的识别作用, 主客体结合常数的顺序为H₂PO₄^->CH₃COO^-≈ F^->HSO₄^- ≈ Cl^->Br^- ≈ I^-; ¹H NMR滴定研究发现, 该类受体分子以咪唑2位CH和脲基NH与阴离子通过氢键结合, 但高浓度的F^-会导致受体分子发生脱质子作用.     

Efficient Amide Based Halogenide Anion Receptors

In this paper, we present the synthesis and anion recognition properties of the amide based phenanthroline derivatives 1, 2 and 3. In all cases 1:1 receptor : anion complexes were observed. The receptors were found to be selective for fluoride and chloride respectively over other putative anionic guest species.     

Anion Control in the Self-Assembly of a Cage Coordination Complex

An anion is encapsulated in the center of the new cage compound [Ni₆(atu)₈X]X₃ (X=Cl—for the structure see picture—or Br; Hatu=amidinothiourea). A combination of Lewis acid–base and hydrogen-bonding interactions cause the square-planar [Ni(Hatu)₂]²⁺ units, after deprotonation, to assemble to form this compound. A remarkable feature is the anion dependence of the cage formation; nitrate, acetate, and perchlorate are unsuitable as templates.     

三核笼状茂铁咪唑受体的合成与阴离子识别

以间三苯酚为原料与不同的二溴代烷反应得到不同链长的三溴中间体1a~1c,再与二茂铁甲基咪唑反应得到不同臂长的三核茂铁咪唑阴离子受体2a~2c.利用循环伏安法(CV)、差分脉冲伏安法(DPV)和核磁共振氢谱(1H NMR)研究了受体与阴离子的结合特性.电化学滴定实验结果表明,受体2a~2c在乙腈溶液中均能很好地识别F-;核磁滴定结果表明,受体2a~2c在DMSO-d6中与阴离子通过(C—H)+…anion氢键作用形成1∶1络合物,F-的滴加同时对受体产生去质子化效应;阴离子识别实验结果表明,三核茂铁咪唑受体能很好地选择性识别F-.     

芳酰基硫脲受体的合成及对阴离子识别研究

设计合成了3种芳酰基硫脲受体分子. 利用紫外-可见吸收光谱考察了其与F^－, Cl^－, Br^－, AcO^－, HSO₄^－, H₂PO₄^－等阴离子的作用. 结果表明该类受体分子与阴离子形成氢键配合物. 加入F^－, AcO^－时, 溶液立刻由无色变为黄色, 而加入其它阴离子则无变化, 从而实现对这两种阴离子的裸眼识别. 结果表明受体分子与阴离子间形成1∶1型的配合物. ¹H NMR滴定及质子溶剂效应为受体分子与阴离子间的氢键作用本质提供了直接依据.     

玻璃上基于自组装和喷墨打印的选位金属沉积

采用氨基硅烷自组装分子对玻璃表面进行修饰; 借助喷墨打印技术, 按照设计好的线路图形把引发化学镀的催化剂“墨水”喷射在上述修饰表面上. 由于自组装分子具有朝向面外的氨基末端能吸附作为催化剂的溶胶或离子, 因而可以起到“有机浆糊”的作用, 使图形化的催化剂层固定在表面上以充当模板, 由于化学镀只在催化剂模板上发生, 从而可获得与设计一致的, 且与基底牢固结合的金属沉积图形. 将该方法拓展应用到玻璃基底上, 着重优化自组装条件, 提高了结合力, 首次实现了玻璃表面上包括金、铜以及镍硼合金在内的多种金属直接成型.     

基于二硫代氨基甲酸盐自组装的糖芯片制备与表征

糖基传感芯片是定量研究糖-蛋白相互作用的有力工具。传统糖基传感芯片的制备过程通常涉及糖基硫醇衍生物的合成,过程复杂且产率较低。本文采用脱氧氨基糖与二硫化碳温和条件下一步反应合成了一类新型糖基自组装功能分子-糖基二硫代氨基甲酸盐(DTC)化合物,进而在金衬底芯片上构筑了糖基传感功能膜。采用X射线光电子能谱(XPS)分析了该糖基传感功能膜的元素组成和元素化学环境;采用表面等离子体共振(SPR)和酶联凝集素分析(ELLA)技术定量分析了其在蛋白质水平的糖生物学活性。通过混合自组装的方法,制备了一系列表面葡萄糖密度不同的糖基传感功能膜并测定了伴刀豆球蛋白(Con A)吸附的热力学和动力学数据。通过调控表面密度,我们观察到了蛋白在葡萄糖表面吸附的多价态现象。当自组装溶液中葡萄糖-DTC摩尔分数低于1%时,Con A呈现单价态吸附,其解离平衡常数(Kd)为(39.10±0.12)μmol?L-1;当自组装溶液中葡萄糖-DTC摩尔分数高于2%时,Con A呈现多价态吸附,解离平衡常数降至(1.17±0.18)μmol?L-1。本文所发展的糖基自组装功能分子合成方法快速便捷、适用范围广,通过混合自组装可以实现蛋白结合价态的调控,是一种深入研究基于糖-蛋白相互作用的诸多生物过程的有效工具。     

Diamidopyrazoles: A New Class of Anion Receptors

The synthesis of a series of 3,5-diamidopyrazoles is reported. The anion binding properties of these systems were examined via ¹H NMR, UV/Vis and ITC titration techniques. Target compound 2a acts as a selective receptor for phosphate and sulfate anions in DMSO, whereas N-methylated 2b and the unmethylated species 4d show no appreciable binding affinity. Insights into the binding events occurring in solution came from the solid state structures of compounds 2a and 4a, 4b, and 4d, which were deduced from single crystal X-ray diffraction analyses.     

间苯二甲醛缩双芳氨基硫脲的合成及阴离子识别研究

设计合成了5种间苯二甲醛缩双芳氨基硫脲受体分子, 利用紫外-可见吸收光谱及1H NMR, 考察了其与F-, Cl-, Br-, I-, CH3COO-, HSO-4, NO-3和H2PO-4等8种阴离子的作用. 当在受体分子S0, S1, S2, S3和S4的DMSO溶液中加入F-和CH3COO-四丁基铵盐的DMSO溶液时, 吸收光谱发生显著红移, 溶液颜色由无色变为深黄色, 而加入其它阴离子则无显著变化, 可以实现对这两种阴离子的裸眼检测及光谱分析. 计算结果表明, 随着苯环上取代基的变化, 此5种受体分子对F-和CH3COO-的识别作用呈现规律性变化. 1H NMR 及质子溶剂效应进一步证明了受体分子与阴离子之间以氢键作用方式相结合. Job工作曲线表明, 该类受体分子与阴离子形成1∶1的氢键配合物.     

喹啉类主体分子的设计合成与阴离子识别

合成了系列 5 ( 8 羟基喹啉 )偶氮苯衍生物 ,研究了取代基对其吸收光谱的影响 ,比较了不同主体化合物对阴离子亲合能力的差异 .研究结果表明 :5 ( 8 羟基喹啉 )偶氮 4′ 甲基苯对F-具有选择性识别作用 ,主客体分子间形成 1∶1型阴离子配合物 ,其最大吸收波长为 5 0 8nm ,溶液颜色由无色变为红色 ,配合物的稳定常数为 2 5× 10 4mol-1·L .其它阴离子如AcO-,H2 PO-4,HSO-4,ClO-4,Cl-和Br-等均不影响主体与F-的显色反应 ,据此建立了选择性识别氟离子新体系 .     

脲类受体对阴离子的结合、识别和分离

在阴离子受体中,脲基因其作为双氧键给予体,能与许多阴离子结合,成为一类重要的、有效的受体单元,同时该类受体的功能化为阴离子结合行为的检测提供了方便.本文综述了近年来单脲、二脲、多脲及金属辅助的脲类受体的设计合成及对阴离子的结合、识别和分离方面的研究进展.     

Amide-based Fluorescent Macrocyclic Anion Receptors

Introduction Interest in the selective recognition and sensing of anionic species continues to attract the attention of su-pramolecular chemistry community.1 The importance of anions in chemical and biological process can not be underestimated. It is well known that in nature neutral proteins bind anions only via hydrogen bonding interac-tions.2 Several anion receptors have been constructed from five-membered heterocycle,3 amide,4 (thio) urea,5 since these groups form relatively strong NHanio…     

含氮杂环类阴离子受体*

含氮杂环类阴离子受体是目前超分子阴离子识别领域研究的热点之一。此类受体具有主体结构丰富、可调节性强、识别范围广、选择性强、灵敏度高等优点。本文综述了以吡咯、吲哚、咪唑、吡唑等含氮杂环为识别基团的阴离子受体的设计原理、识别性能和机理,展望了该领域的发展方向。     

Receptors for tetrahedral oxyanions

This review covers the field of anion recognition from the perspective of tetrahedral oxyanion recognition. The bulk of the attention is devoted to metal-free systems that are able to effect the recognition, binding or transport of phosphate and sulfate. Particular emphasis is devoted to design criteria that allow for discrimination and selectivity. In this context, a variety of recognition motifs are discussed and, within each receptor class, general paradigms that allow for the construction of receptor systems with high affinity and specificity are noted.     

硝基苯偶氮酚衍生物应用于阴离子识别

设计合成了对硝基苯偶氮酚类化合物,比较了α-萘酚、8-羟基喹啉和苯酚等3类偶氮硝基苯衍生物的吸收光谱及其阴离子配合物稳定性的差异.研究表明,α-萘酚、8-羟基喹啉和苯酚等3个含酚羟基的偶氮硝基苯化合物均可识别阴离子客体,产生显著的光谱和颜色变化,实现了裸眼检测阴离子.就同一主体分子而言,主-客体配合物的稳定常数大小依次为AcO^->F^->H₂PO^-₄>Cl^-,与阴离子碱性强弱顺序一致;而不同主体分子对同一阴离子亲和力的大小顺序为:α-萘酚>8-羟基喹啉>苯酚,亲和力的大小与主体分子中电子供体的给电子能力和主体分子共轭体系的大小相关.     

Anion and ion-pair receptor chemistry: highlights from 2000 and 2001

This review article highlights advances made in abiotic anion coordination chemistry in 2000 and 2001. The structure of this review is that similar to the previous reviews in this series that covered 1997, 1998 and 1999 [1 and 2]. The review also includes examples of ion-pair receptors. The first section examines anion receptors that do not contain metal ions. This is followed by a review of metal containing anion receptors in which the metal can function as: (i) a coordination site for the anion; (ii) an agent withdrawing electron density from the receptor; (iii) an organisational element in the receptor; (iv) a sensor; and (v) a co-bound guest in ion-pair receptor. Examples of the role of anions in directing the self-assembly of complex molecular architectures are presented in the final section.     

Thiourea Based Tweezer Anion Receptors for Selective Sensing of Fluoride Ions

Three 3,3＇-di（4-substituted-phenyl）-1,1＇-isophthaloylbis（thiourea） compounds were designed as novel neutral anion receptors, and synthesized by simple steps in good yields. The single crystal structure of receptor 1 shows that a solvent molecule was captured by the host molecule through intermolecular hydrogen bonding. Moreover, it was self-assembled as a supramolecular system for the presence of abundant inter- and intramolecular hydrogen bonding and π-π interactions between phenyl groups. Their application as anion receptors has been examined by UV-Vis and ^1H NMR spectroscopy, showing that they had a higher selectivity for fluoride than other halides. The host and guest formed a 1 ： 1 stoichiometry complex through hydrogen bonding interactions in the first step, then following a process of deprotonation in presence of an excess of F^- in the solvent of DMF.     

Self-assembly of DNA Nanostructures via Bioinspired Metal Ion Coordination

Despite a growing interest in DNA nanomaterials,their simple synthesis remains a challenge.A simple and general strategy for constructing DNA-based nanomaterials by metal ion coordination is reported.The me-tal-DNA nanoparticles(NPs)could be synthesized with DNA molecules of diverse sequence and various metal ions of intrinsic property,resulting in multifunctional NPs with the combined advantages of both inorganic and DNA building blocks.It is demonstrated that the hybrid metal-DNA NPs could be engineered for magnetic resonance and luminescence imaging,encapsulation of multifarious nucleic acids with controlled ratio,and co-assembly with small drug molecules.Furthermore,because these metal-DNA NPs exhibited enhanced cellular uptake compared to free synthetic DNA,they hold potential for applications in diagnostics and therapeutics.