Preparation and Evaluation of Visible Light-Cured Multi-Methacrylates for Dental Composites

Abstract

To explore new VLC oligomers exhibiting low shrinkage, low water sorption, and improved mechanical properties, a family of multi-methacrylates, based on poly(isopropylidenediphenol) resin (BPA), was synthesized, characterized, and evaluated. The BPA resin, having an average of eight phenolic hydroxyl groups per molecule, was treated with ethylene carbonate and the resultant product esterified at four different grafted levels, using methacryloyl chloride. Structures of these EEBPA oligomers, were confirmed by FT-IR and ¹³C NMR. The EEBPA oligomer/TEGDMA (50/50, w/w) blends were combined with 0.5 wt% camphoroquinone(CQ) and 1.0 wt% N,N-dimethylaminoethyl methacrylate (DMAEM). The control was BisGMA/TEGDMA (50/50, w/w) blends having the same levels of CQ/DMAEM. Differential photocalorimetry (DPC) and differential scanning calorimetry (DSC) showed the multi-methacrylate/TEGDMA (neat resin) blends have polymerization characteristics comparable to the BisGMA/TEGDMA control. These multi-functional oligomers have lower polymerization shrinkage and lower uptake of water and other liquids. In addition, two experimental oligomers EEBPA #2 and #3 have higher compressive strength than the BisGMA and comparable diametral tensile strength to the BisGMA control. These results suggest that the new type of multi-functional methacrylate oligomers (EEBPA) have potential application in formulating dental composites with improved properties.     

NOVEL TRIMETHACRYLATES: SYNTHESIS,CHARACTERIZATION, AND EVALUATION OF NEW MONOMERS FOR IMPROVED DENTAL RESTORATIVES

ABSTRACT

Two novel trimethacrylates, i.e., 1,1,1-tri-[4-(methacryloxyethoxy)-phenyl] ethane (TMPE) and 1,1,1-tri-[4-(2-methyl-2-methacryloxyethoxy)-phenyl]ethane (TMMPE), have been synthesized by reacting methacryloyl chloride with the corresponding hydroxyl intermediates. Both trimethacrylate monomers, having a low viscosity of 11.5 and 13.1 Pa.S, respectively, were blended with TEGDMA at three different weight ratios, i.e., 90/10, 70/30, and 50/50. The mixtures were made visible light-curable (VLC) by the addition of camphorquinone (0.5 wt%) and N,N-dimethyl-aminoethyl methacrylate (1.0 wt%). In addition to evaluation as cured neat resins, VLC formulations with 70% by wt. of silanated microfiller were also prepared and evaluated. The control in both cases was a VLC formulation of BisGMA/TEGDMA (70/30 and 50/50 wt/wt). These new, formulated resins have both improved physical properties and higher double bond conversion than the BisGMA control, as well as decreased linear polymerization shrinkage (LPS). The neat resin having 70/30 (wt/wt) ratio of TMPE/TEGDMA (T7T3, Table 2) exhibited a compressive strength (CS) of 496 (±51) MPa compared to the 70/30 (wt/wt) ratio of BisGMA/-TEGDMA control having 425(±27) MPa. A filled resin having a 90/10 (wt/wt) ratio of TMPE/TEGDMA exhibited a flexural strength (FS) of 122.6(±23) MPa, compared with a similar filled BisGMA/TEGDMA (70/30, wt/wt) resin exhibiting 112.7(±19) MPa. These and other results suggest that these new trimethacrylates have potential application in formulating dental composites with improved performance.     

Thermal Decomposition and Glass Transition Temperature of Poly(methyl Methacrylate) and Poly(isobutyl Methacrylate)

Abstract

The thermal decomposition and the glass transition temperatures of poly(methyl methacrylate) (PMMA) and poly(isobutyl methacrylate) (PiBuMA) were studied with a differential scanning calorimeter (DSC). The undecomposed and decomposed polymers were analyzed by gel permeation chromatography (GPC) for molecular weight distributions and by DSC for changes in the thermal properties and glass transition temperatures, T. In the isothermal decomposition of PMMA and PiBuMA, depolymerization reactions exclusively are operative. During low temperature decompositions, longer PMMA chains depolymerize first. These are followed by the shorter chains. In the case of PiBuMA, the shorter chains depolymerize first. Some of these undergo chain recombinations to yield very high molecular weight products. For identical values of weight loss, the respective decomposition temperatures for PiBuMA are 40 to 70 K lower than those for PMMA. The activation energies of decomposition (42 kJ/mol for PMMA and 67 kJ/mol for PiBuMA) have been found to be lower than those reported in the literature. Although T_g∞ of PiBuMA (331 K) agrees well with the literature value (326 K), T_g∞ of atactic PMMA (394 K) is higher than the reported value (378 K).     

Synthesis and characterization of semi-interpenetrating polymer networks using biocompatible polyurethane and acrylamide monomer

Semi-interpenetrating polymer networks (semi-IPNs) of acrylamide based polyurethanes were synthesized from different NCO-terminated polyurethane prepolymers derived from polytetramethylene ether glycol (PTMEG). The resulting semi-IPNs were characterized using FTIR, DSC, and TGA measurements. Variation in the NCO/OH ratio and the molecular weight of the diol gave semi-IPNs with different types of mechanical characteristics varying from elastomer to brittle plastic properties. Differential scanning calorimetry (DSC) data revealed a difference in the glass transition temperature (T_g) of the semi-IPNs relative to the normal polyacrylamide (PAAM) network. Incorporation of polyurethane into polyacrylamide network in the form of an interpenetrating polymer networks enhanced the mechanical and thermal properties of the semi-IPNs due to higher crosslink density imparted by the hard segment content. The swelling behavior of both the semi-IPNs and the individual polyacrylamide (PAAM) network in different pH conditions were investigated to check their biocompatibility and possible usage in biomedical field. The hydrolytic stability of the semi-IPNs and the polyacrylamide (PAMM) network was studied using phosphate buffer solution. The hydrolytic stability of the semi-IPNs was found to be more compared to PAMM network. The morphology of both the semi-IPNs and the individual polyacrylamide (PAAM) network was investigated using SEM.     

Impact of low‐molecular mass components (oligomers) on the glass transition in thin films of poly(methyl methacrylate)

Commercial polydisperse atactic poly(methyl methacrylate) (PMMA) exhibits a decreased glass transition temperature (T_g) when the film thickness is less than ～60 nm, whereas more model atactic PMMA shows an increased T_g in thin films supported on clean silicon wafers. NMR indicates no difference in tacticity, so the divergent thin film behavior appears related to the relative distribution of molecular mass. Extraction of some low molecular weight PMMA components from the commercial sample results in a significant modification of the thin film T_g compared with the initial PMMA fraction. The extracted sample exhibits initially a slight decrease in T_g as the film thickness is reduced below ～60 nm, but then T_g appears to increase for films thinner than 20 nm. These results illustrate the sensitivity of polymer thin film properties to low‐molecular mass components and could explain some of the contradictory reports on the T_g of polymer thin films that exist in the literature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

不同结构颗粒对PMMA基复合材料性能影响

采用原位本体聚合法制备PMMA/MCM-41(with template),PMMA/SBA-15(with template),PMMA/SiO2三种复合材料.研究了介孔分子筛MCM-41,SBA-15和SiO2对PMMA复合材料拉伸强度,冲击强度,热稳定性的影响.由于合成介孔分子筛MCM-41,SBA-15时所用的模板剂CTAB和P123分布于孔口处和颗粒表面上,分别与PMMA基体产生物理缠结作用,增加了两者的相容性;且P123(EO20PO70EO20)表面有较大的PO/EO比率,与小分子量的CTAB相比有较强的疏水性,使得PMMA/SBA-15(with template)复合材料的性能要优于PMMA/MCM-41(with template).     

Additive Effects of Lithium Salts with Various Anionic Species in Poly (Methyl Methacrylate)

We report that lithium salts in lithium-ion batteries effectively modify the physical properties of poly (methyl methacrylate) (PMMA). The glass transition temperature (T_g) is an indicator of the heat resistance of amorphous polymers. The anionic species of the salts strongly affected the glass transition behavior of PMMA. We focused on the additive effects of various lithium salts, such as LiCF₃SO₃, LiCOOCF₃, LiClO₄, and LiBr, on the T_g of PMMA. The large anions of the former three salts caused them to form macroscopic aggregates that acted as fillers in the PMMA matrix and to combine the PMMA domains, increasing T_g. On the other hand, LiBr salts dispersed microscopically in the PMMA matrix at the molecular scale, leading to the linking of the PMMA chains. Thus, the addition of LiBr to PMMA increased T_g as well as the relaxation time in the range of glass to rubber transition.     

METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 2. PHOTO-POLYMERIZATION AND PROPERTIES FOR DENTAL RESIN SYSTEMS

The purpose of this research is to demonstrate the usefulness of the synthesized hyperbranched multi-methacrylates (H-MMAs) in dental applications. We synthesized three hyperbranched multi-methacrylate oligomers and evaluated them as modifiers for use in the dental resin system: bisphenol A glycidyl dimethacrylate (BisGMA)/tri(ethylene glycol) dimethacrylate (TEGDMA). Their photo-polymerization activities, viscosity, mechanical properties, such as compression, diametral tensile, and flexural strength, were evaluated. H-MMAs (10%) modified dental resins have lower polymerization shrinkage and about 15% increase in mechanical strength compared to the Bis-BisGMA control. For example, H30-MMA has compressive, diametral tensile, and flexural strength of 576, 47, and 85 MPa, compared with the BisGMA control having 497, 43, and 77 MPa. In addition, hyperbranched polymer modified resins have higher glass transition temperature (T_g) and lower thermal expansion coefficient (α) than the control. This research is significant both for increasing our knowledge about hyperbranched multi-functional polymers as well as leading to new dental resin systems with better performance.     

Synthesis and properties of liquid crystalline urethane methacrylates for dental composite applications

Three novel liquid crystalline methacrylates have been synthesized and characterized to be tested as comonomers in light‐curing dental resin‐based composites. The selected formulations consist of an alkylammonium or cholesteryl urethane methacrylate and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxypropyl)phenyl]propane (BisGMA) or a BisGMA derivate modified with urethane methacrylate groups, further diluted with triethyleneglycol dimethacrylate (TEGDMA) and reinforced with 70% filler (zirconium silicate nanopowder, silanized filler). This study addresses the relationships between the LC monomer structure, photopolymerization rates (by differential scanning photo calorimetry), and specific properties of the dental resin composites (volumetric shrinkage, water sorption, water solubility, and hydrophobicity). The investigation of LC properties by differential scanning calorimetry and polarizing microscopy indicated that the LC mesophase is stable to room temperature (cationic monomers) or at 40 °C (cholesteryl methacrylate). It was found that the polymerization rate for LC urethane methacrylates used in combination with BisGMA/TEGDMA (0.122–0.136 s^?1) is higher than that of the mesogenic monomers alone (0.085–0.107 s^?1). The structures of the urethane monomers and, consequently, the viscosity of the comonomer mixture influence both the rate and the degree of conversion (44.8–67.5 %) of the photopolymerization process. Polymerization shrinkage measured by pycnometry showed lower values for LC monomers (3.25–3.43 vol %) comparatively with the monomer mixture (5.19–6.65 vol %). Preliminarily, the effect of ammonium groups from two resin composites incorporating alkylammonium structures (4.5 wt %) was tested on Streptococcus mutans, and distinct zone of inhibition was observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

Assembly and characterization of Ag nanoparticles in PAM-g-PVA/PVP semi-interpenetrating network hydrogels

Polyacrylamide grafted poly(vinyl alcohol)/polyvinylpyrrolidone (PAM-g-PVA/PVP) semi-interpenetrating network (semi-IPN) hydrogels were designed and prepared via a simple free radical polymerization reaction process initiated by a PVA-(NH₄)₂Ce(NO₃)₆ redox system. The structure of the PAM-g-PVA/PVP semi-IPNs was characterized by a Fourier transform infrared spectroscopy. The morphologies of PAM-g-PVA/PVP hydrogels and PAM-g-PVA/PVP/Ag nanocomposite hydrogels were examined by scanning electron microscopy and transmission electron microscopy (TEM). The experimental results indicated that the PAM, PVA or PVP chains can efficiently act as stabilizing agents for Ag nanoparticles. TEM investigation of sample morphology showed the presence of nearly spherical-, square- or rectangular-shaped Ag nanoparticles with diameters ranging from 10 to 60 nm. The characteristic surface plasmon resonance band appeared at 390–400 run as a result of the immobilization of Ag nanoparticles within the hydrogel matrices. The self-assembly of Ag nanoparticles and the swelling behavior of the resulting nanocomposites can be controlled and modulated by altering the mole fraction of PVP in the PAM-g-PVA/PVP semi-IPNs.     

Phase behavior and a modified Kwei equation for ternary polymer blends containing stereoregular PMMA

Previously, poly(methyl methacrylate) (PMMA) was found to be almost immiscible with poly(vinyl acetate) (PVAc) regardless of tacticity of PMMA and casting solvent. Poly(vinyl phenol) (PVPh) was found successful previously in making immiscible atactic PMMA/PVAc miscible. In this investigation, tacticity effect of PMMA on a ternary composed of PMMA, PVAc and PVPh was studied. Isotactic PMMA ternary was shown to be miscible in all the studied compositions on the basis of single T_g observation. However, syndiotactic PMMA ternary demonstrated immiscibility at ca. 25% PVPh and miscibility was observed at higher PVPh concentrations. A modified Kwei equation based on the binary interaction parameters was proposed to describe the experimental T_g of the miscible ternary almost quantitatively.     

Characterization of dimethacrylate polymeric networks: a study of the crosslinked structure formed by monomers used in dental composites

The resin phase of dental composites is mainly composed of combinations of dimethacrylate comonomers, with final polymeric network structure defined by monomer type/reactivity and degree of conversion. This fundamental study evaluates how increasing concentrations of the flexible triethylene glycol dimethacrylate (TEGDMA) influences void formation in bisphenol A diglycidyl dimethacrylate (BisGMA) co-polymerizations and correlates this aspect of network structure with reaction kinetic parameters and macroscopic volumetric shrinkage. Photopolymerization kinetics was followed in real-time by a near-infrared (NIR) spectroscopic technique, viscosity was assessed with a viscometer, volumetric shrinkage was followed with a linometer, free volume formation was determined by positron annihilation lifetime spectroscopy (PALS) and the sol–gel composition was determined by extraction with dichloromethane followed by ¹H NMR analysis. Results show that, as expected, volumetric shrinkage increases with TEGDMA concentration and monomer conversion. Extraction/¹H NMR studies show increasing participation of the more flexible TEGDMA towards the limiting stages of conversion/crosslinking development. As the conversion progresses, either based on longer irradiation times or greater TEGDMA concentrations, the network becomes more dense, which is evidenced by the decrease in free volume and weight loss after extraction in these situations. For the same composition (BisGMA/TEGDMA 60–40 mol%) light-cured for increasing periods of time (from 10 to 600 s), free volume decreased and volumetric shrinkage increased, in a linear relationship with conversion. However, the correlation between free volume and macroscopic volumetric shrinkage was shown to be rather complex for variable compositions exposed for the same time (600 s). The addition of TEGDMA decreases free-volume up to 40 mol% (due to increased conversion), but above that concentration, in spite of the increase in conversion/crosslinking, free volume pore size increases due to the high concentration of the more flexible monomer. In those cases, the increase in volumetric shrinkage was due to higher functional group concentration, in spite of the greater free volume. Therefore, through the application of the PALS model, this study elucidates the network formation in dimethacrylates commonly used in dental materials.     

Polymer thin film properties as a function of temperature and pressure

We report on evanescent wave optical measurements of the glass transition temperature, T_g, of spin-cast PMMA films as a function of film thickness and molecular weight. It was found that for films of high molecular weight PMMA (M_n > 100,000 g mol⁻¹) a strong T_g depression occurs for films that are thinner than 100 nm in case they are deposited on hydrophobic substrates. This strong T_g depression of up to 25°C decreases if similarly thick films of PMMA of low molecular weights are investigated and vanishes completely for PMMA with M_n < 12,000 g mol⁻¹. For films made of these materials T_g is found to be identical to that of the bulk even for films as thin as 5 nm. The results might be interpreted in terms of free volume considerations. To check this assumption we also designed and built a pressure cell that can be used together with the evanscent wave optical techniques for similar measurement, but with the additional option to do the measurements at different pressures up to ca. 100 MPa to further vary the free volume of these polymer films in constrained geometry. Some first results obtained with this setup are also described.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Synthesis and Thermal Characterizations of Pmma Nanocomposite Functionalized by Polyhedral Oligomeric Silsesquioxane

Abstract

A novel polyhedral oligomeric silsesquioxane/polymethyl methacrylate (POSS/ PMMA) hybrid nanocomposite was synthesized by using potassium persulfate and sodium dodecyl sulfate as the initiator and emulsifier, respectively. The structures of prepared nanocomposites were characterized with X-ray photoelectron spectroscopy, laser particle size analysis, and X-ray diffraction. The thermal properties of the POSS/PMMA nanocomposites were studied by differential scanning calorimetry, and thermogravimetric analysis. The results indicate that POSS could be incorporated into the PMMA matrix at molecular lever and the incorporation of POSS molecules can improve the thermal stability of PMMA.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures]     

Synthesis, characterization and thermoreversible behaviours of poly(dimethyl siloxane)/poly(N-isopropyl acrylamide) semi-interpenetrating networks

Simultaneous and sequential poly(N-isopropyl acrylamide) (PNIPAAm)/poly(dimethyl siloxane) (PDMS) semi-interpenetrating polymer networks (IPNs) with different linear PDMS contents were prepared by free radical polymerization method. Their phase morphologies have been characterized by FTIR, DSC and SEM. The simultaneous semi-IPNs exhibited phase transition temperatures (T_pt) shifted higher temperature from glass transition temperatures (T_g) of their respective homopolymers, suggesting a heterophase morphology and only physical entanglement between the PNIPAAm network and linear PDMS with high molecular weight (Mn≈9000 g/mol). For sequential semi-IPNs, the shift of T_pts towards lower temperature suggested that the chemical interaction between the constituents of the IPNs increased with increasing PDMS content in the network. In addition, these semi-IPNs were characterized for their thermo-sensitive behaviour by equilibrium swelling studies. The results showed that incorporation of hydrophobic PDMS polymer into the thermo- and pH-sensitive PNIPAAm and P(NIPAAm-co-IA) (itaconic acid) hydrogels by semi-IPN formation decreased swelling degrees of IPNs without affecting their LCSTs whereas addition of acrylated PDMS (Tegomer V-Si 2250) as crosslinker instead of N,N^′-methylenebisacrylamide (BIS) into the structures of these hydrogels changed their LCSTs along with their swelling degrees.     

Influence of sample preparation and processing on observed glass transition temperatures of polymer nanocomposites

Polymer composites composed of poly(methyl methacrylate) (PMMA) and silica (14 nm diameter) have been investigated. The influences of sample preparation and processing have been probed. Two types of sample preparation methods were investigated: (i) solution mixture of PMMA and silica in methyl ethyl ketone and (ii) in situ synthesis of PMMA in the presence of silica. After removing all solvent or monomer, as confirmed using thermogravimetric analysis, and after compression molding, drops in T_g of 5–15 °C were observed for all composites (2–12% w/w silica) and even pure polymer reference samples. However, after additional annealing for 72 h at 140 °C, all previously observed drops in T_g disappeared, and the intrinsic T_g of bulk, pure PMMA was again observed. This is indicative of nonequilibrium trapped voids being present in the as‐molded samples. Field‐emission scanning electron microscopy was used to show well‐dispersed particles, and dynamic mechanical analysis was used to probe the mechanical properties (i.e., storage modulus) of the fully equilibrated composites. Even though no equilibrium T_g changes were observed, the addition of silica to the PMMA matrices was observed to improve the mechanical properties of the glassy polymer host. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2270–2276, 2007     

Effects of molecular mass and surface treatment on adsorbed poly(methyl methacrylate) on silica

The behavior of relatively monodisperse adsorbed poly(methyl methacrylate) (PMMA) samples, from 19 to 587 kDa on silica, was studied using modulated differential scanning calorimetry and FTIR. On untreated Cab? O? Sil silica, the glass transition temperatures (T_gs) were higher (by around 30 °C), and the transitions were significantly broader (by a factor of 5–6) than those for the corresponding bulk samples. While the T_gs for the bulk polymers showed the expected dependence on molecular mass, the polymers on untreated silica showed little dependence, i.e., at the same adsorbed amounts, the glass transitions were very similar. The FTIR spectra of the adsorbed PMMA (on untreated silica) showed the presence of at least two resonances, one for the bound (hydrogen bonded to surface silanols) and another for free carbonyls. Fitting of the spectra allowed the estimation of the bound fractions of carbonyls that were dependent on the adsorbed amount, but not molecular mass. On Cab? O? Sil treated with hexamethyldisilizane (HMDS), the adsorbed PMMA exhibited glass transition behavior with little molecular‐mass dependence; the T_gs for the different PMMA samples were very similar to those of the high‐molecular mass bulk polymer, but with additional broadening of about a factor of 2. FTIR spectra for the PMMA samples on the treated silica did not show significant amounts of any of the hydrogen‐bonded carbonyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 649–658, 2008     

Segmental and secondary dynamics in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) blends

Broadband dielectric spectroscopy was used to study the segmental (α) and secondary (β) relaxations in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) (PVPh/PMMA) blends with PVPh concentrations of 20–80% and at temperatures from ?30 to approximately glass‐transition temperature (T_g) + 80 °C. Miscible blends were obtained by solution casting from methyl ethyl ketone solution, as confirmed by single differential scanning calorimetry T_g and single segmental relaxation process for each blend. The β relaxation of PMMA maintains similar characteristics in blends with PVPh, compared with neat PMMA. Its relaxation time and activation energy are nearly the same in all blends. Furthermore, the dielectric relaxation strength of PMMA β process in the blends is proportional to the concentration of PMMA, suggesting that blending and intermolecular hydrogen bonding do not modify the local intramolecular motion. The α process, however, represents the segmental motions of both components and becomes slower with increasing PVPh concentration because of the higher T_g. This leads to well‐defined α and β relaxations in the blends above the corresponding T_g, which cannot be reliably resolved in neat PMMA without ambiguous curve deconvolution. The PMMA β process still follows an Arrhenius temperature dependence above T_g, but with an activation energy larger than that observed below T_g because of increased relaxation amplitude. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3405–3415, 2004