Stimuli-responsive multilayer chitosan hollow microspheres via layer-by-layer assembly

Novel stimuli-responsive multilayer chitosan hollow microspheres with chitosan as the unique component have been fabricated by the sequential layer-by-layer electrostatic assembly technique from the sacrificial templates (polystyrene sulfonate, PSS) with chitosan (CS) as the polycation and carboxymethyl chitosan (CMCS) as the polyanion, respectively. Their hollow structure was confirmed by the TEM analysis. The DLS analysis indicated that the multilayer chitosan microcapsules were pH and ionic strength dual-responsive. Due to the biocompatibility of the single component chitosan used, the multilayer chitosan microcapsules are expected to be used in the controlled release of drugs.     

pH-responsive protein microcapsules fabricated via glutaraldehyde mediated covalent layer-by-layer assembly

Bovine serum albumin (BSA) hollow microcapsules were fabricated through glutaraldehyde (GA) mediated covalent layer-by-layer assembly. The GA cross-linking of the adsorbed BSA on the colloidal particles enabled their surfaces to be covered by reactive aldehyde groups, which reacted with BSA molecules to result in another covalently linked layer. Repeating of this cycle could then yield particles coated with BSA multilayers. Hollow microcapsules well dispersed in water were obtained after core removal. The good integrity and morphology of the BSA capsules were confirmed and characterized by confocal laser scanning microscopy, scanning electron microscopy and scanning force microscopy. The obtained BSA microcapsules possess reversible pH response, i.e., the capsules are permeable to macromolecules below pH 4 or above pH 10, while impermeable in between. The mechanisms of permeability transition were discussed. Using this property, dextran, with a molecular weight of ~155 kDa, was successfully loaded.     

Biomimetic modification of chitosan with covalently grafted lactose and blended heparin for improvement of in vitro cellular interaction

Lactose‐ and heparin‐modified chitosan films were prepared and their physical and biological properties were compared with chitosan, chitosan‐g‐heparin, and chitosan‐g‐lactose films. Atomic force microscopy (AFM) measurement showed that all these films in the dry state were rather flat with a roughness smaller than 20 nm. While the chitosan‐g‐lactose/heparin and chitosan‐g‐lactose films have the highest swelling and weight loss ratios, the chitosan and chitosan‐g‐heparin films have the lowest. The chitosan‐g‐lactose/heparin film showed stronger ability to induce chondrocyte attachment, proliferation, viability, and glycosaminoglycan (GAG) secretion than that of the chitosan, chitosan‐g‐heparin, and chitosan‐g‐lactose films. Chondrocyte aggregates and nodules were observed on the chitosan‐g‐lactose/heparin and chitosan‐g‐lactose films, which still preserved viable metabolic ability. These results show that the lactose‐modified and heparin‐incorporated chitosan film can enhance the cell–biomaterial interaction synchronously. The resulting chitosan‐g‐lactose/heparin material is more bioactive that might be applicable as promising scaffold for chondrogenesis. Copyright © 2007 John Wiley & Sons, Ltd.     

Protein adsorption and platelet adhesion of polysulfone membrane immobilized with chitosan and heparin conjugate

Polysulfone (PSF) membranes were treated with ozone to introduce peroxides, and then grafted with either acrylic acid or chitosan, followed by the immobilization of heparin. The effect of spacer arm on blood compatibility was investigated using three chitosans of different molecular weight [1170 (water soluble), 160 000, and 400 000] and similar degrees of deacetylation (75%). The hydrophilicity was evaluated by measuring the contact angle of water. Blood compatibility was evaluated using the activated partial thromboplastin time (APTT) as well as the adhesion of platelets. The protein affinity was determined by the absorption of human serum albumin (HSA) and human plasma fibrinogen (HPF). The results show that by the coupling of chitosan, the amount of heparin immobilized can be increased by four times. Water contact angle (from 78 ° to 41 °) decreased with the increase of the amount of heparin immobilized, showing increased wettability. The heparinized PSF membrane showed longer APTT and decreasing platelet adhesion, compared to that of unmodified PSF membrane. The adsorption of HSA and HPF were reduced to 17 and 6%, respectively. This suggests that longer spacer binding to heparin can increase the opportunity of anti‐coagulation on contacting blood. These results demonstrated that the hydrophilicity and blood compatibility of PSF membrane could be improved by chitosan and heparin conjugate. Copyright © 2003 John Wiley & Sons, Ltd.     

Fabrication of polyvinyl alcohol/chitosan oligosaccharide hydrogel: physicochemical characterizations and in vitro drug release study

Abstract

Hydrogel composites from polyvinyl alcohol and chitosan have been developed by various researchers as a function of their composition for various medical applications. Although, the solubility of chitosan in acidic solvents may limit its wide bioengineering applications. In this article, we demonstrate that polyvinyl alcohol-chitosan oligosaccharide (water soluble) to develop cross-linked hydrogel network using chemical cross linker. X ray diffraction, Fourier transform infrared spectroscopy, and wettability study of these hydrogels were also performed. Lomefloxacin drug was loaded into the hydrogels and its release profile was studied.     

In-vitro hemocompatibility evaluation of a thermoplastic polyurethane membrane with surface-immobilized water-soluble chitosan and heparin

The surface of a thermoplastic polyurethane (TPU) membrane was treated with low temperature plasma (LTP) and was then grafted with poly(acrylic acid) (PAA), followed by the grafting of water-soluble chitosan (WSC) and heparin (HEP). The surface was characterized with static contact-angle and X-ray photoelectron spectroscopy (XPS). The results showed that the surface densities of peroxides and PAA reached a maximum when treated with LTP for 90 s. A higher pH of the reacting solution led to higher graft densities of WSC and HEP. After WSC and HEP grafting, the hydrophilicity of the TPU membrane was increased. The adsorption of proteins on HEP-grafted TPU membranes was effectively curtailed. In addition, HEP grafting also reduced platelet adhesion, elevated thrombin inactivation, and prolonged the blood coagulation time. According to the L929 fibroblast cell growth inhibition index, the HEP-grafted TPU membranes exhibited non-cytotoxicity. Overall results demonstrated that the HEP immobilization could not only improve the hydrophilicity but also the hemocompatibility of the TPU membrane, while maintaining the ascendant biocompatibility.     

单分散壳聚糖微囊的制备与表征

对水溶性壳聚糖和对苯二甲醛在水/油界面发生的交联反应进行了研究,考察了水相溶液的pH值和油相中对苯二甲醛的浓度对该界面交联反应的影响.采用微流控技术制备得到了单分散的壳聚糖微囊:首先通过毛细管同轴聚焦流微流控装置制备得到单分散的O/W/O乳液.乳液制备中,以Pluronic F-127作为水相乳化剂,羟乙基纤维素作为水相增稠剂,水溶性壳聚糖溶于中间水相;交联剂对苯二甲醛溶于内部油相;含乳化剂PGPR 90的大豆油作为外部油相.乳液制备完成后,以乳液为模板,对苯二甲醛通过油/水界面扩散进入水层,与壳聚糖的氨基发生交联反应,生成壳聚糖聚合物凝胶网络,从而构成微囊的囊壁.通过光学显微镜分析和扫描电镜观察发现:微囊具备良好的单分散性和球形度以及尺寸均一的内部空腔,微囊的囊壁致密无孔.所得单分散微囊在药物传递等领域具备潜在的应用价值.     

Fabrication of polymeric-Laponite composite hollow microspheres via LBL assembly

Hollow structure microspheres with composite polymeric-Laponite shells were prepared by electrostatic self-assembly of Laponite on the polymeric hollow microspheres in this work. The multilayer hydrophilic core/hydrophobic shell polymer latex particles containing carboxyl groups inside were first synthesized via seeded emulsion polymerization, followed by alkali treatment, generating polymeric hollow microspheres. Then, polyethyleneimine (PEI) and Laponite were alternately electrostatic adsorbed on the prepared polymeric hollow microspheres to form polymeric-Laponite composite hollow microspheres. It was indicated that the morphology of alkali-treated microspheres could be tuned through simply altering the dosage of alkali used in the post-treatment process. Along with the increasing of the coating layers, the zeta potential of microspheres absorbed PEI or Laponite approximately tended to be constant respectively, and the thickness of Laponite layer around the hollow microspheres increased clearly, getting more uniform and homogenous. Furthermore, the corresponding polymeric-Laponite hollow microspheres showed high pressure resistance ability compared to the polymeric hollow microspheres.     

Layered microcapsules for daunorubicin loading and release as well as in vitro and in vivo studies

Anti‐cancer drug daunorubicin (DNR) was encapsulated in preformed multilayer microcapsules and was applied in tumor treatment by in vitro cell culture and in vivo animal experiments. The microcapsules were fabricated by an alternate deposition of oppositely charged polysaccharides, i.e. chitosan and alginate onto carboxymethyl cellulose (CMC) doped CaCO₃ colloidal particles in a sequential assembly procedure, followed by crosslinking of the capsule shells with glutaraldehyde (GA) and removal of the templates by disodium ethylenediaminetetraacetic acid (EDTA). The as‐prepared microcapsules showed strong ability to induce the positively charged DNR to deposit into the microcapsule interiors. Confocal microscopy and transmission electron microscopy observed homogeneous distribution of the drug within microcapsules. The loaded DNR could be released again, following a diffusion‐controlled model at the initial stage. In vitro experiments demonstrated that the encapsulated DNR can effectively induce the apoptosis of BEL‐7402 tumor cells, as evidenced by various microscopy techniques after acridine orange (AO), Hoechst 33342, and osmium tetraoxide staining. By seeding the BEL‐7402 hepatoma cells into BALB/c/nu mice, tumors were created for the animal experiments. The results showed that the encapsulated DNR had better efficacy than that of the free drug in terms of tumor inhibition in a 4 week in vivo culture period. Copyright © 2007 John Wiley & Sons, Ltd.     

仿生微胶囊的组装及其应用

在生物物理和生物医药研究领域中,在分子水平上组装功能化的仿生微胶囊具有重要的理论和应用价值.在现有制备微胶囊的技术手段中,层层组装技术以其能够控制胶囊的尺寸、形状、囊壁的厚度和组成以及易于实现功能化等特点,引起了人们越来越多的研究兴趣.本文将着重介绍如何利用层层组装技术,以磷脂、蛋白质和其他生物大分子为组装基元构筑仿生微胶囊、以及如何将微胶囊进行生物界面化的修饰.此外,以仿生微胶囊为药物载体,探讨其在光动力治疗方面的应用也作简单介绍.     

负载壳聚糖吸附剂的研制及吸附性能

以壳聚糖(CS)为原料,对不同温度活化的高岭土(KLN)作表面改性,制备了一系列高岭土负载壳聚糖微粒。通过对壳聚糖包覆率的测定确定了高岭土活化温度在800℃时其负载率最佳。IR分析发现壳聚糖对高岭土的改性是以高岭土中的骨架铝与壳聚糖产生化学键合完成的。Cu2 吸附实验表明,改性后的高岭土(CS-KLN)饱和吸附量达到158.3mg/g,优于仅用酸活化的高岭土,且吸附的pH范围为4~6,比高岭土宽,其最佳吸附pH=5.2。     

Preparation of chitosan rods with excellent mechanical properties: One candidate for bone fracture internal fixation

Chitosan (CS) is one promising material as a temporary mechanical supporter for bone fracture internal fixation.In our previous work,we successfully fabricated CS rods through one in situ precipitation route.But bending strength and bending modulus of CS rods need to be improved to match the commercially available devices used for bone fracture internal fixation.In this research,CS rods were reinforced effectively through cross-linking reaction by using glutaraldehyde as the coupling reagent.Schiff’s base w...     

Fabrication of multilayer-film-modified gold electrode composed of myoglobin,chitosan, and polyelectrolyte-wrapped multi-wall carbon nanotubes by layer-by-layer assembled technique and electrochemical catalysis for hydrogen peroxide and trichloroacetic acid

Electroactive multilayer film of myoglobin (Mb)-, chitosan (CS)-, and poly(dimethyldiallylammonium chloride) (PDDA)-wrapped multi-wall carbon nanotubes (MWNTs) is fabricated on a gold electrode via layer-by-layer (LBL) technique. The assembled multilayer films is characterized by scanning electron microscopy (SEM), UV-vis spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). UV-vis spectroscopy showed that Mb in the films retained its near-native structure. The stable multilayerfilm-modified gold electrodes showed good electroactivity in protein-free buffer solution, which is originated from protein heme Fe(III)/Fe(II) redox couple. The modified electrode exhibited good electrocatalytic property toward reduction of H₂O₂ and trichloroacetic acid, indicating the potential application as amperometric biosensor. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 11, pp. 1366–1376. The text was submitted by the authors in English.     

Efficient loading and delivery of ciprofloxacin by smart alginate/carboxylated graphene oxide/aminated chitosan composite microbeads: In vitro release and kinetic studies

New composite microbeads were formulated as smart pH-sensitive vehicle for efficient delivery of ciprofloxacin (CIP) drug. Herein, carboxylated graphene oxide (CGO) was successfully impregnated into alginate (Alg) microbeads, which were then coated with aminated chitosan (AmCs) layer to form core–shell Alg/CGO@AmCs composite microbeads. Diverse analysis tools comprising FTIR, TGA, XRD and SEM were employed to characterize the developed carriers, while their swelling profiles and pH-sensitivity were examined under different pHs. The results clarified that increasing CGO and AmCs concentrations in microbeads matrix greatly protected Alg microbeads from fast disintegration at colon pH and prolonged their swelling time. Moreover, about 94.65 % of CIP drug was successfully loaded by Alg/CGO@AmCs composite microbeads compared to 61.95 % for Alg microbeads, confirming their reduced porosity. The in vitro CIP-release profiles were investigated in simulated gastrointestinal conditions. Furthermore, increasing AmCs concentration in the outer shell of composite microbeads clearly minimized the CIP burst release at the colon region and offered a sustained release performance. Besides, the CIP release mechanism was well-described by korsmeyer-peppas kinetic model. The cytotoxicity study confirmed the potential safety of the Alg/CGO@AmCs composite microbeads with human cell viability reached 98.98 %, suggesting their applicability as smart carriers for oral delivery of antibiotics.     

Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer

The improvement of hydrophilicity and hemocompatibility of poly(tetramethylene adipate-co-terephthalate) (PTAT) membrane was developed via polyelectrolyte multilayers (PEMs) immobilization. The polysaccharide PEMs included chitosan (CS, as a positive-charged and antibacterial agent) and dextran sulfate (DS, as a negative-charged and anti-adhesive agent) were successfully prepared using the aminolyzed PTAT membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of as-modified PTAT membranes reached to the steady value after four bilayers of coating, hence suggesting that the full coverage was achieved. It could be found that the PTAT–PEMs membranes with DS as the outmost layer could resist the platelet adhesion and human plasma fibrinogen (HPF) adsorption, thereby prolonging effectively the blood coagulation times. According to L929 fibroblast cell growth inhibition index, the as-prepared PTAT membranes exhibited non-cytotoxic. Overall results demonstrated that such an easy, valid and shape-independent processing should be potential for surface modification of PTAT membrane in the application of hemodialysis devices.     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

De novo synthesis of uronic acid building blocks for assembly of heparin oligosaccharides

An efficient de novo synthesis of uronic acid building blocks is described. The synthetic strategy relies on the stereoselective elongation of thioacetal protected dialdehydes 12 a and 17. The dialdehydes are prepared from D-xylose, a cheap and commercially available source. A highly stereoselective MgBr(2)OEt(2)-mediated Mukaiyama aldol addition to C4-aldehyde 12 a is performed to obtain D-glucuronic acid building block 16, whereas L-iduronic acid building block 22 is prepared by MgBr(2)OEt(2)-mediated cyanation of C5-aldehyde 17. Synthesis of a heparin disaccharide demonstrates the utility of the de novo strategy for the assembly of glycosaminoglycan oligosaccharides.     

海藻酸钠-壳聚糖-桑椹红微囊的制备

以海藻酸钠-壳聚糖为复合囊材采用锐孔法制备桑椹红微囊,探讨了海藻酸钠浓度、壳聚糖浓度、Ca Cl2浓度、桑椹红浓度、针头孔径、下滴高度、温度、转速等因素对微囊包封率的影响。确定了最佳制备工艺条件为海藻酸钠浓度4.0%、壳聚糖浓度2.5%、氯化钙浓度2.0%、桑椹红浓度0.50%、针头孔径0.390mm、下滴高度4cm、温度为20℃、转速为300r·min-1。制得的微囊药物含量为11.28%,包封率为88.93%。     

Layer‐by‐layer assembly of readily detachable chitosan and poly(acrylic acid) polyelectrolyte multilayer films

Free‐standing layer‐by‐layer (LbL) assembled thin films have recently found utility in a broad range of applications. Previously reported free‐standing LbL films have generally required covalent modifications to improve aqueous stability and render these films suitable for biomedical applications. Here, we engineered chitosan and poly(acrylic acid) containing polyelectrolyte multilayer films, which are readily detached from hydrophilic silicon in aqueous conditions. These films demonstrate remarkable stability over 28 days in simulated in vivo conditions (pH 7.4, phosphate buffered saline at 37 °C) without the incorporation of any covalent crosslinking modifications. These films exhibit moduli (27–420 kPa) resembling that of many biological tissues including tendon, show high visible light transmittance of greater than 50%, and prevent fibronectin adsorption. The properties of this new detachable LbL film architecture indicate its promise for use in a variety of applications, particularly in medicine and biotechnology. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 127–131