Epoxide Polymerization and Copolymerization with Carbon Dioxide Using Diethylaluminum Chloride-25,27-Dimethoxy-26,28-dihydroxy-p-tert-butyl-Calix[4]arene System as a New Homogeneous Catalyst

ABSTRACT

Previously unknown substituted chelate phenolatoaluminum chloride, (25,27-dimethoxy-p-tert-butylcalix[4]arene-26,28-diolato) aluminum chloride, was derived from the reaction of diethyl-aluminum chloride and 25,27-dimethoxy-26,28-dihydroxy-p-tert-butylcalix[4]arene at reactants 1:1 mole ratio. It was applied successfully for the polymerization of propylene oxide and cyclohexene oxide, and their copolymerization with carbon dioxide, leading to respective oligomers and co-oligomers. The catalyst structure and the structure of the obtained low-molecular-weight polymers and copolymers were studied using NMR spectroscopy. Poly(propylene oxide) obtained in the presence of the studied catalyst appeared to contain isotactic diads predominantly, whereas the obtained poly(cyclohexene oxide) did not exhibit any significantly prevailing sequences of either isotactic nor syndiotactic diads. The polymerization mechanism has been proposed and discussed in view of the obtained results.     

p-tert-Butylcalix[4]arene Derivatives Containing Azathiol Receptors and Their Recognition towards Hg(II)

25,27(2,2'-bis(ethoxybenzyl))-1,9-diimine-3,7-dithianonane-p-tert-butylcalix[4]arene (3),25,27(4,4'-bis(ethoxybenzyl))-1,9-diimine-3,7-dithianonane-p-tert-butylcalix[4]arene (4),25,27(2,2'-bis(ethoxybenzyl))-1,8-diimine-3,6-dithianonane-p-tert-butylcalix[4]arene (5) and25,27(4,4'-bis(ethoxybenzyl))-1,8-diimine-3,6-dithianonane-p-tert-butylcalix[4]arene (6) havebeen synthesized by condensation reactions between25,27(2,2'-bis(ethoxybenzaldehyde))-p-tert-butylcalix[4]arene (1) and25,27(4,4'-bis(ethoxybenzaldehyde))-p-tert-butylcalix[4]arene (2) and appropriateamines. Reduction of 3 and 4 withNaBH₄ and subsequent protonation byHCl/CH₃OH resulted in25,27(2,2'-bis(ethoxybenzyl))-1,9-diaza-3,7-dithianonane-p-tert-butylcalix[4]arenedihydrogenchloride (7) and25,27(4,4'-bis(ethoxybenzyl))-1,9-diaza-3,7-dithianonane-p-tert-butylcalix[4]arenedihydrogenchloride (8), respectively. Complexation studies of 7 and 8 withZn(II), Cd(II) and Hg(II) ions were carried out bypotentiometric titration. Compounds 7 and8 selectively form 1 : 1 complexes with Hg(II), andtheir stability constants (log Ks) were estimated tobe 4.47 ± 0.08 and 3.20 ± 0.13, respectively. From spiecies distribution plots, 7 and 8were found to form the highest amount of 1 : 1 complexes with Hg(II) at pH 8.7 and 9.1, respectively.     

Preparation and biological properties of inclusion compounds of calix[4]arene and 1,4-benzodiazepinone derivatives

The possibility of enhancing the oral bioavailability of certain 1,4-benzodiazepinones by using them as complexes with a series of calix[4]arene derivatives was examined. All the inclusion compounds prepared exhibit anticonvulsant activity by antagonism with Corazol spasmodic agent. Complexes with 25,27-bis[(hydrazinocarbonyl)methoxy]-26,28-dihydroxy-p-tert-butylcalix[4]arene exhibit higher pharmacological activity compared to the starting 7-bromo-5-(o-chloro)phenyl-and 1-hydrazinocarbonylmethyl-7-bromo-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepin-2-ones.     

Synthesis of two new p-tert-butylcalix[4]arene β-ketoimin derivatives for extraction of dichromate anion

In this study the selective derivatization of p-tert-butylcalix[4]arene was carried out and two new p-tert-butylcalix[4]arene β-ketoimin, 5,11,17,23-tetra-tert-butyl-25,27-bis-3-methyl-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (4), and 5,11,17,23-tetra-tert-butyl-25,27-bis-3-chloro-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (5) have been synthesized. In the synthesis, the lower rim of p-tert-butylcalix[4]arene was modified in order to acquire binding site for the recognition of dichromate anion. It was observed that these ionophores 4 and 5 showed high affinity towards dichromate anion. The protonated Schiff-base forms of the receptors were effective for transferring the HCr₂O₇ ^? anion from aqueous phase to a dichloromethane phase.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

Conformations and Structures of Two Novel Upper Rim Disubstituted Derivatives of Tetra-O-alkylcalix[4]arene: The Effect of Substituents

Two new calix[4]arene derivatives, 5,17-dinitro-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (4) and 5,17-diamino-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (5), have been synthesized and fully characterized. The ¹H NMR spectra measured in different solvents and temperatures indicated that the dominant conformer is partial cone for 4 and cone for 5, though there are some variations in relative ratio of partial cone to cone conformers. The structures of partial cone 4 and cone 5 are determined by X-ray crystallography. The different conformational behavior in compounds 4 and 5 is governed by the two substituents at the upper rim. The repulsion of the dipole due to the p-nitro substituents and weak interaction between methoxy group and the inverted anisole ring in the 4 may be responsible for stabilizing the partial cone conformation.This revised version was published online in July 2005 with a corrected issue number.     

Preparation and characterisation of thiol functionalised p-tert-butylcalix[4]arene-embedded polymer inclusion membranes: performance and selectivity

ABSTRACT

Here in we report the syntheses of the thiol functionalised p-tert-butylcalix[4]arene from the reaction of p-tert-butylcalix[4]arene-dialkylbromide derivative with thiourea. The structure of the thiol functionalised p-tert-butylcalix[4]arene was determined by using ¹HNMR, ¹³CNMR and elemental analysis techniques. Furthermore, the thiol functionalised p-tert-butylcalix[4]arene, cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPPE) in dichloromethane were used to make a new calixarene-embedded polymer inclusion membrane (Bu^t-C@PIM). The surface and structure morphology of Bu^t-C@PIM was detected using thermogravimetric analysis, elemental analysis techniques and scanning electron microscopy. The affinity (the percentage of metal ion transferred from the source solution) of a PIM towards a range of divalent cations was found to follow the order Pb²⁺ > Zn²⁺ > Ni²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺. The results also indicated that the transport efficiency of Bu^t-C@PIM was repeatable and may be beneficial in the development of a simplistic and highly influential trace metal recovery method from aqueous solution.     

Synthesis and Properties of New Thiacalixarene Derivatives with Palladium Ion

Three new thiacalix[4]arene derivatives, 5,11,17,23-tetra-tert-butyl-25,27-di(2-hydroxyethoxy)-26,28-dihydroxythiacalix-{}[4]arene (2), 5,11,17,23-tetra-tert-25, 26,27,28-tetrakis[(methylcarboxyl)methoxy]thiacalix[4]arene (3),5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(2-hydroxy-1-propanoxy)thiacalix[4]arene (4), were synthesized for the first time. The coordination properties of thiacalix[4]arene(1) and its derivatives (2 and 4) were investigated by detecting the interactions betweenthese compounds and two palladium complexes, cis-[Pd(en)(H₂O)₂]²⁺ and cis-[Pd(dtco-3-OH)(H₂O)₂]²⁺, by means of electrospray ionization mass spectrometry (ESI-MS) technique.     

Synthesis and Solid-State Conformation of a Calix[8]arene 1,5-Diquinone Derivative

The first example of a calix[8]quinone derivative, hexamethoxy-p-tert-butylcalix[8]-1,5-diquinone 5, has been synthesized from p-tert-butylcalix[8]arene 1by exploiting a protection-deprotection procedure. The structure of the 5·toluene inclusion compound has been determined by a single crystal X-ray diffraction study. The calix[8]arene molecule possesses a crystallographic inversion centre and assumes a ‘pseudo-chair-like’ conformation, with two opposite 3/4-cone moieties, which resembles the previously reported chair-like conformation of p-tert-butylcalix[8]arene. The 4 toluene molecules per unit cell occupy interstitial voids and are released in the temperature range of 30–160 °C.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis and characterization of azocalix[4]arene ester and ketone derivatives incorporated in a polymeric backbone with bisphenol-A and their cation-binding properties

This study comprises synthesis and characterization of azocalix[4]arene compounds having copolymeric structures. The novel bisazocalixphenol-A and copolymer containing pendant azocalix[4]arene units with ester (5) and ketone (6) functionalities at their lower rim have been synthesized via diazo-coupling reaction. The phase transfer study is performed by liquid?Cliquid extraction method. It has been deduced from the observations that their precursors 25,26,27-tribenzoyloxy-28-hydroxy-5-(4-aminophenylazo)calix[4] arene (3), 25,27-diacetoniloxy-26,28-dihydroxy-5,17-(4-aminophenylazo)calix[4]arene (4) and bisazocalixphenol-A (5) show a good phase transfer affinity towards selected transition metal cations, unlike copolymer (6). These compounds are studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and it is carried out using compounds 1?C6. It is observed that the reduced azocalix[4]arene 4 is the most efficient (82.93?%) carrier of all compounds (3?C6) in the extraction of Fe³⁺ at pH 5.4.     

A combined extraction and DFT study on the complexation of K+ with valinomycin

Abstract  From extraction experiments in the two-phase water–nitrobenzene system and γ-activity measurements, the stability constant of protonated tetraethyl p-tert-butylcalix[4]arene tetraacetate in nitrobenzene saturated with water was determined. By using DFT calculations, the most probable structure of the tetraethyl p-tert-butylcalix[4]arene tetraacetate·H₃O⁺ complex species was derived. Graphical Abstract        

Synthesis, characterization, and conformational analysis of new perfunctionalized calix[9]arenes

The synthesis of a series of six new per-substituted p-tert-butylcalix[9]arenes derivatives has been achieved. Functions such as ester, nitrile, or carbonate have been grafted on the phenolic oxygens of calix[9]arene: p-tert-butylcalix[9]arene nona-ethyl acetate, p-tert-butylcalix[9]arene nona-carboxylic acid, p-tert-butylcalix[9]arene nona-cyanopropyloxy, p-tert-butylcalix[9]arene nona-tert-butoxycarbonyle, p-tert-butylcalix[9]arene nona-acetyl, and p-tert-butylcalix[9]arene nona-trifluoroacetyl have been obtained in good yields (from 48% to 78%) and fully characterized. The X-ray structures of p-tert-butylcalix[9]arene nona-tert-butoxycarbonyl and p-tert-butylcalix[9]arene nona-ethyl acetate have been determined. A dynamic NMR study has revealed the high conformational mobility of such structures, even at low temperature.     

Synthesis and conformation studies of multiple bridged p-tert-butylcalix[7]arene diphosphates

p-tert-Butylcalix[7]arene reacting with phosphorus pentachloride and then with water afforded two stereoisomers p-tert-butylcalix[7]arene diphosphates 2a and 2b, representing the first phosphorus multiple bridged calix[7]arene. The more accurate structure of 2a was investigated with the aid of Gaussian03 calculations.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

A Schiff basep-tent-butylcalix[4]arene. Synthesis and metal ion complexation

This communication describes the synthesis of Schiff base calix[4]arene (1) in which the Schiff base unit bridges two opposite hydroxy groups ofp-tert-butylcalix[4]arene. The synthesis of (1) has been achieved by refluxing in acetonitrile-methanol the appropriate 1,3-dicarbaldehyde-p-tert-butyl-calix[4]arene (4) with 1,3-diaminopropane. The yield of the reaction is 19%. Ligand (1) possesses a compartment containing two nitrogen atoms, four ether-type oxygen atoms, and two ionizable hydroxy groups likely to complex metal cations.     

Azocalixarenes.8: synthesis and investigation of the absorption spectra of di-substituted azocalix[4]arenes containing chromogenic groups

The synthesis of series of chromogenic di-substituted azocalix[4]arene derivatives is described. A ketone moiety as a different chelating agent is grafted on the lower rim of p-tert-butylcalix[4]arenes. Eight novel azocalix[4]arenes (1–8) are prepared by linking 2-, 3- and 4-nitroaniline, 4-phenylazoaniline, 3- and 4-chloroaniline or 2- and 4-methylaniline to 25,27-diacetonyloxy-26,28-dihydroxy-11,23-di-(tert-butyl)calix[4]arene through a diazo-coupling reaction, and characterized by UV–Vis, FT-IR and ¹H-NMR spectroscopic techniques and elemental analysis, consecutively. The absorption spectra of the di-substituted azocalix[4]arenes are discussed, according to effect of varying pH and solvent upon the absorption ability of azocalix[4]arenes. The colors of these azocalix[4]arenes are compared with respect to nature of their aromatic rings and substituents there in. Concentration effects on the visible absorption maxima of these compounds are also reported.     

Recognition Studies of a Pyridine-Pendant Calix[4]arene with Neutral Molecules: Effects of Non-covalent Interactions on Supramolecular Structures and Stabilities

A new calix[4]arene derivative containing hydrogen bond acceptors,5,11,17,23-tetra-tert-butyl-25,27-bis[(4-pyridylmethyl)oxy]-26,28-dihydroxycalix[4]arene (L), has been synthesized. ¹H-NMR titrations in chloroform-d werecarried out to investigate the host–guest chemistry ofL towards neutral molecules containing a widevariety of hydrogen bond donor groups such as aldehydederivatives of p-tert-butylcalix[4]arenes(compounds 3 and 4), acetylacetone,1,2-diaminoethane, 2,6-diaminopyridine, catechol,resorcinol, hydroquinone, phthalic acid, isophthalicacid and terephthalic acid. L can formcomplexes with resorcinol, phthalic acid and catecholin 1 : 1 (log K = 3.13), 1 : 1 (log K = 5.41) andpolymeric fashions, respectively. In addition, thesolution structures of these complexes have beenrevealed by NOESY experiments. L forms a 1 : 1complex with resorcinol by hydrogen bonding and vander Waals interactions resulting in a supramolecularframework. The phthalic acid molecule interacts withL via hydrogen bonding and is included into thelower rim cavity of L.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Synthesis of Calix[4]arene Derivatives Containing a Nucleobase and their Interaction with Complementary Nucleosides at the Air–Water Interface

Amphiphilic calix[4]arene derivatives with a nucleobase on the lower rim have been synthesized in good yields by the condensation of calix[4]arenediamine {5,11,17,23-tetra-tert-butyl-25,27-bis(2-aminoethoxy)-26,28-dihydroxycalix[4]arene} with uracilo-N-acetic acid, thymino-N-acetic acid and adenino-N-propionic acid in the presence of CDI in DMF. Monolayers of the amphiphilic calix[4]arene-nucleobase derivatives on the surface of pure water, the aqueous subphases containing complementary nucleosides, were studied by film balance measurement and relaxation experiments. LB films deposited from all subphases were investigated by UV spectra and FT-IR spectroscopy. All the results indicate that the interaction between the nucleobases in the headgroup of amphiphilic p-tert-butylcalix[4]arene derivatives and the complementary nucleosides in the subphase takes place through multiple hydrogen bonding and the nucleosides can be transferred to solid substrates along with their monolayers.