Single chemosensor for sensing multiple analytes: Selective fluorogenic detection of Cu2+ and Br−

A tripodal receptor R1 with a combination of nitrogen and oxygen-based binding sites was designed and used for the selective determination of Cu²⁺. The fluorescence emission profile of R1 in the presence of Cu²⁺ showed a marked enhancement in fluorescence intensity, indicating high selectivity among other metal ions. The R1–Cu²⁺ complex was further explored as a sensor for anion detection. Upon addition of Br^?, switching to a fluorescence “off” state was observed. The Br^? selectivity of the complex over a wide range of concentrations was observed via titrimetric analysis through changes in the emission spectra.     

A facile ratiometric and colorimetric azo-dye possessing chemosensor for Ni2+ and AcO− detection

A new tailor-made colorimetric chemosensor 1, containing pyridine and benzothiazole moieties connected through an azo (–N = N–) linkage has been synthesised. In 9:1 (v/v) aqueous THF (pH 7.0 HEPES buffer), it showed a conspicuous naked-eye colour change upon binding to Ni²⁺ (colourless to light green) and AcO^?  (colourless to orange) resulting in their ratiometric sensing. The cation and anion recognition property of the chemosensor 1 was monitored by UV–vis spectral analysis and ¹H NMR titrations.     

Thiophene and diethylaminophenol-based “turn-on” fluorescence chemosensor for detection of Al3+ and F− in a near-perfect aqueous solution

A new fluorescent sensor 1, based on thiophene and diethylaminophenol moieties, has been synthesized and its binding capabilities for metal-ion and anion recognition were investigated. The sensor 1 showed ‘turn-on’ fluorescence in the presence of Al³⁺ and F^?. The sensing behaviors of 1 with Al³⁺ and F^? were studied by using photophysical experiments, ¹H NMR titration, and ESI-mass spectrometry analysis. The detection limits for the analysis of Al³⁺ and F^? were found to be 0.41 μM and 14.36 μM, respectively, which are below the WHO guidelines for drinking water (7.41 μM for Al³⁺ and 79 μM for F^?). Moreover, turn-on fluorescence of 1 toward Al³⁺ and F^? caused by intramolecular charge transfer (ICT) was well explained by density functional theory (DFT) calculations. Importantly, 1 could be used to detect Al³⁺ in the living cells.     

Synthesis of new bis-benzylidene-hydrazides as a sensitive chromogenic sensor for naked-eye detection of CN¯ and AcO¯ ions

Some new bis-benzylidene-hydrazides were synthesized via a condensation reaction of the corresponding azo dyes with adipic acid dihydrazide. All compounds because of the three possible stereoisomers showed four sets of signals in NMR. The anion recognition studies exhibited that the nitro bis-benzylidene-hydrazide derivative acts as a highly sensitive and selective chromogenic sensor for naked-eye detection of CN¯ and AcO¯ ions, with a distinct color change from yellow to blue and yellow to purple, respectively. The limit of detection (LOD) was found for 1d toward CN¯ to be 1.1?μM. The result of the Job's plot indicated stoichiometry of binding between chemosensor and anions is found to be 1:2.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

Benzothiazole-based heterodipodal chemosensor for Cu2+ and CN– ions in aqueous media

A simple and selective chemosensor, A, was developed for recognizing Cu²⁺. The emission spectra of receptor A showed a fluorescence quenching response upon addition of Cu²⁺ with a low detection limit of 4.51 nM, significantly less than the WHO recommended guideline for drinking water. In addition, the formed A?Cu²⁺ complex was examined for secondary sensing of anions. The A?Cu²⁺ complex showed selectivity for CN^– via a recovering emission profile of A.     

Determination of hydrogen peroxide and organic peroxides in micellar and aqueous–organic media using a spectrophotometric biosensor based on horseradish peroxidase

The expedience of the target-specific control of the properties of a medium (using micellar and aqueous–organic media), in which an indicator process providing the background for the operation of a spectrophotometric sensor based on a polyelectrolyte complex (horseradish peroxidase–chitosan) is conducted, is shown experimentally and proved by calculations of kinetic parameters of the enzymatic reaction. The application of the sensor ensures an increase in the sensitivity of the determination of peroxides of different nature and structures (e.g., hydrogen and urea peroxides, benzoyl peroxide, 2-butanone peroxide and tertbutyl hydroperoxide) in complex matrixes. The proposed approach allows the analyst not only to regulate the performance characteristics of the developed procedures for the determination of peroxides depending on the analytical task, but also to extend the range of test samples (including those insoluble in water) analyzed with no sample preparation.     

A simple colorimetric chemosensor for relay detection of Cu2+ and S2− in aqueous solution

A simple colorimetric chemosensor 1 was developed for the sequential detection of Cu²⁺ and S^2?. Sensor 1 could rapidly detect Cu²⁺ by an obvious color change from colorless to yellow. The binding mode of 1 to Cu²⁺ was determined to be a 1:1 complexation stoichiometry through Job plot and ESI-mass spectrometry analyses. The sensing mechanism of Cu²⁺ by 1 was proposed by theoretical calculations. Importantly, the detection limit for Cu²⁺ was found to be 0.12 μM, which was much lower than the recommended value (31.5 μM) of the World Health Organization (WHO). Additionally, 1 could detect and quantify Cu²⁺ in real water samples. Moreover, the resulting 1-Cu²⁺ complex could be used as a highly selective colorimetric sensor for S^2? in the presence of various anions without any interference. The detection limit for S^2? was determined to be 1.66 μM, which was much lower than the guideline (14.8 μM) recommended by WHO in fresh water.     

Facile synthesis of an optical sensor for CO32− and HCO3− detection

A novel fluorogenic signalling probe (E)-3-(4-methoxyphenyl)-4-[(4-nitrobenzylidene)amino]-1H-1,2,4-triazole-5(4H)-thione (6) for the carbonate and bicarbonate ions has been developed through microwave assisted Schiff base formation reaction. The anion recognition occurs through hydrogen bonding assessed by ¹H NMR titration experiments. The photophysical results of probe 6 corroborates its applicability as an optical sensing platform for carbonate as well as bicarbonate ions in mixed aqueous organic media depending on pH of reaction solution. The fluorescence emission signal enhancement at 424 nm and considerable shift in the signal position as well as molar absorptivity to the probe absorption bands upon CO₃^2? and HCO₃^? addition suggest the affinity of probe 6 towards these ions in comparison to a variety of competitive ions in aqueous/ethanol (7:3, v/v) at neutral pH and ambient temperature. From the fluorescence titration experiment, the limit of detection was calculated to be 1.91 μM.     

Advancement and future challenges of metal–organic coordination polymers: A case study of optical sensor for the detection of the environmental contaminants

Fast industrialization, increasing population, rapid urbanization, and the greediness of creamy layer in the society without the issues of caring the sustainability of ecosystem are the main out of many reasons behind the environmental catastrophe. The ecological balance is disturbed with the noxious materials generated from the uncontrolled use of modern science and technology and also unscientific and unsystematic societal growths. To save the modern civilization, a fast-track task is the monitoring of the toxic materials for the maintenance of sustainable ecological health and their utilization in a circular economy. Accordingly, optical methods are employed for the detection and estimation of environmental contaminants for immediate monitoring. The stability and structural tunability of the coordination polymeric (CPs) materials make them promising optical sensors for easy, low cost, reliable, selective, and sensitive detection of toxic ions/molecules. The crystallinity, thermal, mechanical, magnetic, and optical stability and flexibility of the CPs play a beneficial role for the accurate and stress-free recognition of the toxicants. In this review, the recent developments as well as the outlook on the sensing of pollutants at a very low concentration level using CPs as selective and specific sensors by spectro-fluorometric method are summarized. The progresses and challenges in the fabrication of hybrid materials and understanding their structure property correlations are described with an aim to motivate and facilitate the future researchers to perform research in the area.     

A novel colorimetric and “turn-on” fluorescent sensor for selective detection of Cu2+

In this work, a new highly selective and sensitive fluorescent sensor for detecting Cu²⁺ was developed based on rhodamine fluorophore. It displayed strong fluorescence “turn-on” effect upon addition of Cu²⁺, and possessed the function of naked eye recognition. The fluorescence enhancement also enabled the sensor to quantitatively analyze Cu²⁺ due to the formation of a stable 1:1 metal–ligand complex in a short time, and the complex possesses relatively good pH stability. In addition, the density functional theory calculations were adopted to investigate the molecular orbitals as well as the spatial structure. Simultaneously, the cell imaging and zebra fish experiments provided a broader application prospect in biological system.     

Synthesis of β-fluoroenones and their reductive rearrangement in aqueous media

In this paper, a simple and efficient preparation of β-fluoroenones, as a mixture of E/Z isomers with the E-isomer as the main product, from 1,2-allenic ketones by using TBAF·3H₂O in water as a nucleophilic fluorination agent has been developed. Moreover, in exploring the synthetic applications of β-fluoroenones, an unprecedented reductive defluorination rearrangement of β-fluoroenones toward enones under mild conditions in aqueous media was also discovered.     

Phenanthrene-imidazole-based fluorescent sensor for selective detection of Ag+ and F− ions: real sample application and live cell imaging

Research on Chemical Intermediates - 4-Methyl-2,6-bis(1H-phenanthro[9,10-d]imidazol-2-yl)phenol (probe-MPIP) conjugate has been designed as a selective fluorescent probe for silver (Ag+) ions. The...     

Electrochemical sensor based on super-magnetic metal–organic framework@molecularly imprinted polymer for Sarcosine detection in urine

Accurate determination of Sarcosine (SAR) in urine with high sensitivity and selectivity is important, because it was recently recommended as a prospective biomarker for prostate cancer (PCa) and significant for the early identification of PCa. In this study, an electrochemical sensor based on Fe₃O₄ incorporated metal–organic frameworks (MOFs) @molecularly imprinted polymer (MIP) was constructed for SAR detection. Magnetic Fe₃O₄ nanoparticles embedded zeolitic imidazolate framework-8 (ZIF-8) was used as the support of MIP. MIP provides specific recognition sites for template molecules SAR and MOFs increase the rate of mass transfer and adsorption capacity due to the porous structure. The synthesized super-magnetic Fe₃O₄@ZIF-8@MIP was self-assembled onto an Au electrode in magnetic field and used as the sensing unit of electrochemical sensor. Cyclic voltammetry was used to monitor the electrochemical behavior, and the binding of SAR resulted in a reduction in the measured current. The results revealed a wide linear range from 1 to 100 pM towards trace SAR determination, with extremely low limit of detection down to 0.4 pM. In conclusion, the Fe₃O₄@ZIF-8@MIP based sensor provides a selective, sensitive, and convenient method for SAR diagnosis and other cancer marker detection.     

Kinetic and mechanism of oxidation of thiocarbohydrazide and its metal complex by acid bromate in aqueous and partial aqueous media

The kinetics of oxidation of thiocarbohydrazide in the free and zinc(Ⅱ)-bound states byacid bromate have been studied in aqueous and water-acetic acid(1:1,V/V)media under varyingconditions,both in the absence and presence of added bromide ion.The rates of oxidations show firstorder kinetics in[bromate]in all the cases,but exhibit different kinetic behaviour in[substrate]and[H~+].Oxidation of TCH in aqueous medium shows zero order in[TCH]and nearly second order in[H~+],while oxidation in aqueous acetic acid shows two ranges in[H~+].The rate shows first and fractionalorder kinetics in[TCH]in the first and second acid ranges.Kinetics observed in the presence of Br~-are similar to those observed for oxidation of TCH in second acid range.In addition,the reactionshows fractional order in[Br~-].Oxidation of TCH in Zn(Ⅱ)-bound state exhibits first order kinetics in[substrate]and second order in[H~+].Increase in ionic strength of the medium decreases the rate in allthe cases.Increase in acetic acid composition of the solvent increases the rate.Mechanisms consistentwith the observed results have been considered and the rate laws deduced.The rate limiting steps havebeen identified and the coefficients of these steps have been calculated at different temperatures.Therelated activation parameters have also been computed.The validity of the deduced rate laws has alsobeen tested by recalculating the rate constants from them as[TCH]and[H~+]are varied.     

Tl-speciation of aqueous samples – a review of methods and application of IC-ICP-MS/LC-MS procedures for the detection of (CH3)2Tl+ and Tl+ in river water

This study provides an overview on Tl-speciation methods developed in the last years. Most of them require transformation of a species and do not allow direct detection of the species of interest. LC-MS and IC-ICP-MS methods are optimised for direct analysis of the Tl-species Tl⁺ and (CH₃)₂Tl⁺ (dimethylthallium (DMT)) in freshwater on a ng L^?1 level. The methods are applied in a study of water from Vicht River in Stolberg (Germany). Tl⁺ is shown to be at least in part derived from anthropogenic sources among which the industrial sources may be significant. The natural occurrence of DMT is proven, although this Tl-species is temporally variable in abundance and Tl⁺ predominates.     

A biacylhydrazone-based chemosensor for fluorescence ‘turn-on’ detection of Al3+ with high selectivity and sensitivity

A simple Al³⁺ fluorescent chemosensor (1) based on diacylhydrazone has been designed and synthesized by the condensation reaction of 2-hydroxy naphthaldehyde and metaphthalic hydrazide. The chemosensor 1 displays a specific and sensitive response to Al³⁺ over other cations in DMSO solution. Upon the addition of DMSO solution of Al³⁺, the sensor 1 shows an immediate fluorescence ‘turn-on’ response and emitting strong blue emission with visible color change from colorless to green. The fluorescence quantum yield enhanced from 7.24% to 48.68%. Meanwhile, the fluorescence and UV absorption spectra detection limits of the chemosensor 1 for Al³⁺ were 2.0 × 10^?7 M and 5.6 × 10^?7 M respectively, indicating the high sensitivity of 1 to Al³⁺. Furthermore, test strips based on 1 were fabricated, which could be used as a convenient test kit for the detection of Al³⁺ and an efficient Al³⁺ controlled fluorescent security display materials.     

A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

By rationally introducing glutathione functionalized 1, 8–naphthalimide, a novel fluorescent chemosensor (NG) was successfully synthesized. NG can high selectively and sensitively recognize Fe³⁺/Hg²⁺ ions through quenching of fluorescence among all kinds of common metal ions in aqueous medium. The binding stoichiometry ratio of NG–Fe³⁺ is verified as 2:1and NG–Hg²⁺ as 1:2 confirmed by Job's plot method, FT-IR, ¹H NMR and ESI–MS spectrum, and the possible sensing mechanism were also proposed. The chemosensor NG toward Fe³⁺ and Hg²⁺ displays the excellent advantages of high selectivity and sensitivity, low detection limits (7.92?×?10^?8 and 4.22?×?10^?8?M), high association constants (3.37?×?10⁸ and 8.14?×?10⁴?M^?2), instataneous response (about 10s) and wide pH response range (3.0–8.0). Importantly, the chemosensor NG was successfully applied to determine Hg²⁺ in tap water. Meanwhile, the test strips based on NG were prepared, which could conveniently and efficiently detect Fe³⁺ and Hg²⁺. Moreover, the complex of NG and Fe³⁺ (NG–Fe³⁺) showed high selectivity and sensitivity for H₂PO₄￣ over many other anions in the same medium.     

New chromogenic and fluorogenic reagents and sensors for neutral and ionic analytes based on covalent bond formation–a review of recent developments

To date, hydrogen bonding and Coulomb, van der Waals and hydrophobic interactions are the major contributors to non-covalent analyte recognition using ionophores, ligands, aptamers and chemosensors. However, this article describes recent developments in the use of (reversible) covalent bond formation to detect analyte molecules, with special focus on optical signal transduction. Several new indicator dyes for analytes such as amines and diamines, amino acids, cyanide, formaldehyde, hydrogen peroxide, organophosphates, nitrogen oxide and nitrite, peptides and proteins, as well as saccharides have become available. New means of converting analyte recognition into optical signals have also been introduced, such as colour changes of chiral nematic layers. This article gives an overview of recent developments and discusses response mechanisms, selectivity and sensitivity.