Mono Halogen Substituted Calix[4]pyrroles: Fine-tuning the Anion Binding Properties of Calix[4]pyrrole

Abstract

Single halogen atom (i. e. I, Br, Cl and F) substituted calix[4]pyrroles, compounds 2, 3, 4 and 5, were synthesized. Studies of these systems reveal that replacement of a single β-pyrrolic hydrogen atom can increase the anion binding ability of calix[4]pyrroles for a variety of anions (e. g. Cl^?, Br^?, H₂PO₄ ^? and HSO^? ₄) relative to normal non-halogen substituted calix[4]pyrrole 1. In the case of chloride anion, the expected relative affinity sequence of 5 > 4 > 3 > 2 was observed. This was not found to be true for Br^?, H²PO^? ₄, and HSO^? ₄. Here, the chlorine substituted calix[4]pyrrole 4 was found to display a slightly higher affinity in the case of each anion than the fluorine-bearing derivative 5. This was rationalized in terms of intermolecular NH … F hydrogen bonding interactions being present in CD₂Cl₂ solutions of 5. Support for this latter conclusion came from concentration and temperature-dependent NMR spectroscopic studies.

A matched set of mono halogen substituted calix[4]pyrroles was used to study in detail, the extent to which halogen substituents may be used to fine-tune the anion binding properties of calix[4]pyrroles.     

Efficient ZnCl2 assisted synthesis of calix[4]pyrroles catalysed by Brønsted acidic ionic liquids

A facile and efficient protocol is reported for the synthesis of calix[4]pyrroles and N-confused calix[4]pyrroles in moderate to excellent yields by one-pot condensation of ketones and pyrrole in the presence of catalytic amount of nontoxic acidic ionic liquids. In this reaction the products were obtained in short reaction time with selectivity of regular calix[4]pyrroles.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

Synthesis and crystal structure of 15α,20α-di(4-hydroxylphenyl)calix[4]pyrroles and 10α,20β-di(4-hydroxylphenyl)calix[4]pyrroles

In the presence of methanesulfonic acid as catalyst, the condensation reactions of 5,5′-dialkyldipyrromethanes with p-hydroxyacetophenone in methanol resulted in a mixture of the unexpected polysubstituted 15α,20α-di(4-hydroxylphenyl)calix[4]pyrroles and the expected 10α,20β-di(4-hydroxylphenyl)calix[4]pyrroles in comparable lower yields. The crystal structures of the new calix[4]pyrroles and their oxyacetate derivatives were successfully determined by X-ray diffraction and the intermolecular interactions in the solid state is briefly discussed.     

Design and Synthesis of New Chiral Calix[4]arenes as Liquid Phase Extraction Agents for α-Amino Acid Methylesters and Chiral α-Amines

The article describes the synthesis and extraction properties of new (S)-(-)-1-phenylethylamine substituted p-tert-butylcalix[4]arene/calix[4]arene. These compounds have been synthesized via nucleophilic substitution reactions involving 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra(2-hydroxyethoxy)calix[4]arene (4a), or 5,11,17,23-tetra-H-25,26,27,28-tetra(2-hydroxyethoxy)calix[4]arene (4b) with (S)-(-)-1-phenylethylamine in dry THF. The extraction properties of ligands 5a and 5b towards the some selected α-amino acid methylesters and chiral α-amines are also reported. It has been observed that receptor 5a was an excellent ionophore for α-amino acid methylesters/α-amines and good extractant than 5b. However, both of the ligands did not display any selectivity towards the configurations of this species. in final form: 17 January 2005     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

New redox anion receptors based on calix[4]pyrrole bearing ferrocene amide

Two redox anion receptors based on calix[4]pyrrole and ferrocene have been synthesized. The electrochemical investigation revealed that these compounds can be response to the anions with different shifts of Fc/Fc⁺ couple. With the ¹H NMR titration study, the selectivity to F⁻ and AcO⁻ ions in CD₃CN solution was confirmed. The conformations of the mono-aromatic meso-substituted calix[4]pyrroles, which were the synthetical intermediate of the ferrocene based receptors, and their anion complexes in the solid state have also been studied by single X-ray crystallography, and the rationality of the crystal conformations was proved by theoretical study.     

Tuning the anion binding properties of calixpyrroles by means of p-nitrophenyl substituents at their meso-positions

Extended cavity calix[4]pyrroles and a calix[6]pyrrole were synthesized by cyclization of 5-methyl-5-(4-nitrophenyl)dipyrromethane with acetone in the presence of acid. The solid-state structures of the novel macrocycles were determined by X-ray crystallography. The host-guest chemistry of these receptors towards halide ions was investigated in solution by ¹H NMR titration techniques and compared with those of the meso-octamethylcalix[4]pyrrole and meso-dodecamethylcalix[6]pyrrole. The binding of chloride anions was observed to occur with different affinities on the two faces of the novel calix[6]pyrrole derivative described here.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

A facial microwave-assisted synthesis, spectroscopic characterization and preliminary complexation studies of calix[4]pyrroles containing the hydroxamic-acid moiety

The synthesis, spectroscopic characterization and preliminary complexation properties of functionalized calix[4]pyrroles are described. To date, two generalized preparative approaches have been pursued (i) modifying the basic pyrrole-plus-ketone synthesis of calix[4]pyrrole by using microwave irradiation protocol, (ii) the basic meso-tetra(methyl) meso-tetra(p-nitrophenyl) calix[4]pyrrole skeleton was functionalized to give hydroxamic acids, especially in the meso-position of the macrocycles. The structures of novel calix[4]pyrrole hydroxamic acid derivatives were confirmed on the basis of various physico-chemical techniques such as elemental analysis, FT-IR, ¹H NMR and FAB-Mass. The results of preliminary studies on the extraction of vanadium (V) with the host calix[4]pyrrole hydroxamic acids were elucidated by significant examination of UV–Vis spectroscopy and ICP-AES. Single crystal structure of basic meso-tetra(methyl) meso-tetra (p-nitro phenyl) calix[4]pyrrole moiety has also been reported.     

Synthesis and characterisation of a calix[4]pyrrole functional polystyrene via ‘click chemistry’ and its use in the extraction of halide anion salts

A polystyrene with pendant calix[4]pyrroles was prepared via ‘click reaction’ strategy. First, a poly(styrene-co-chloromethylstyrene) with approximately 12% of chloro groups was prepared by conventional free radical polymerisation. The chloro groups were then converted to azido groups using NaN₃ in N,N-dimethylformamide. An alkyne-functionalised calix[4]pyrrole was then coupled to the azido-functionalised polystyrene by click chemistry with high efficiency. The resulting polystyrene with pendant calix[4]pyrroles was used to extract fluoride and chloride anions (as their tetrabutylammonium salts) from their aqueous solutions to organic media.     

Syntheses and Metal-ion Binding Properties of Calix[4]arene Derivatives Containing Soft Donor Atoms: Highly Selective Extraction Reagents for Ag+

A series of calix[4]arene derivatives containing N or S atoms atthe lower rim were synthesized by etherification of OH groups and their metal-ion extraction abilities were studied. The extraction selectivity for Ag⁺ over other ions with these novel receptors was outstanding. Among these ligands, calix[4]arene podand, which possessed two linear ligands, has shown better binding ability with Ag⁺ than calix[4]crowns.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

β-卤素取代对杯[4]吡咯构象及主-客体相互作用的影响(Ⅰ)——分子力学/分子动力学研究

通过分子力学/分子动力学模拟,获得4种游离杯[4]吡咯以及杯[4]吡咯-卤素阴离子主-客体复合物的稳定构象,用偶极子模型解释了β位卤素取代对游离杯[4]吡咯稳定构象、杯[4]吡咯-卤素阴离子复合物的结构及其结合能的影响,指出造成这些影响的主要因素是不同卤素取代导致杯[4]吡咯的吡咯环基团偶极大小不同.计算了不同杯[4]吡咯与卤素阴离子的结合能,当杯[4]吡咯β位上的H原子被卤素阴离子取代后,杯[4]吡咯对阴离子的识别能力加强.     

Synthesis of meso‐tetra acid and ester functionalized calix[4]pyrroles

Novel meso‐tetracarboxylic acid and meso‐tetraester functionalized calix[4]pyrroles were synthesized by condensation of pyrrole with levulinic acid and ethyl pyruvate in sufficient yields. In addition, mixed condensation products can also be synthesized using this method. These new compounds may be useful as molecular receptors and polyfunctional starting materials for further derivatization.     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.     

Molecular design of calixarene-based ion-selective electrodes

In order to obtain insights into relationships between the calix[4]arene structure and the ion selectivity in the electrode system, 20 ionophoric calix[4]arenes were synthesized and their ion selectivity (with Na⁺ as a standard) estimated. Among these ionophoric calix[4]arenes, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-t-octylcalix[4]arene afforded the highest logK _NA,M ^pot value (–3.1) in the presence of 2-fluorophenyl-2-nitrophenylether (10) as the best of 13 plasticizers. This is the first example in which the Na⁺/K⁺ selectivity exceeds a factor of 10³ in the electrode system based on the neutral carrier. The high Na⁺ selectivity is attributed to modification of the upper rim which ostensibly has no relation with the component of the cavity. This paper demonstrates the potential relationships between the unique structure of the calix[4]arene-based ligands and selectivity performance for the design of ion-selective electrodes.     

Design and Syntheses of Novel Calix[4]crown: Calix[4]‐Dixanthates‐Crowns

Abstract

A series of novel calix[4]‐dixanthates‐crowns were designed and synthesized by the “1 + 1 condensation” of reacting calix[4]‐1,3‐dixanthate salts derivative (4) with polyethylene glycol ditosylates in 40–60% yields. It was found that the new calixcrowns showed outstanding complexation abilities towards soft cations. Calix[4]‐dixanthate‐crown‐4 (5b) exhibited high complexation selectivity towards Ni²⁺.     

New Calix[4]arene-monobenzo- and -dibenzo-crown-6 as Cesium Selective Ionophores in the Radioactive Waste Treatment: Synthesis, Complexation and Extraction Properties

Cesium possesses two long lived isotopes ¹³⁵Cs and ¹³⁷Cs and the first one has a very long (2.3 × 10⁶ y) half life and is one of the most mobile nuclides in a repository.Calix[4]arene-crowns-6 in the 1,3-alternate conformation areemerging as a new class of ionophores exhibiting a very high efficiency and selectivity in the complexation of cesium ion and itsremoval from highly acidic ([HNO₃] = 3–4 M) radioactive waste having also high sodium nitrate concentration ([NaNO₃] = 2–4 M). In order to improve both efficiency and cesium selectivity we have synthesised the novel calix[4]arene dibenzo-crowns-6 1 and 2 and thecalix[4]arene-monobenzocrown-6 3 in 1,3-alternate conformationand evaluated their complexation properties towards alkali metal cations in homogeneous solution and in two phase systems, togetherwith their performance in radioactive waste treatment. All data confirm the higher Cs/Na selectivity of the 1,3-alternate calix[4]crown-6 1–3 containing aromatic rings in the polyether loop, in comparison to previously synthesised compounds of the same series.     

Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.