Selective extraction of Fe3+ by a polymeric calix[4]arene

A polymeric compound containing more than one calixarene molecule was synthesized by reacting the oligomer ( 2 ) with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene. After basic hydrolysis of 3a , the polymeric calixarene ( 3b ) was utilized for selective extraction of some metal cations from aqueous phase to organic phase. It was found that the compound ( 3b ) was selective toward Fe³⁺ from an aqueous solution containing Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ cations. The mechanism of the extraction process was discussed. © 1994 John Wiley & Sons, Inc.     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Solvent Extraction of Selenate and Chromate Using a Diaminocalix[4]arene

The extraction of Se(VI) and Cr(VI) using a diammoniumcalix[4]arene was investigated. A study of parameters such as ligand concentration, pH or diluent was carried out and allowed to specify the stoichiometry of the extracted species. It was shown that Se(VI) is extracted into CHCl₃ as (LH₂ ²⁺, Cl^-, HSeO₄ ^-) and ((LH₂ ²⁺)₂, 2Cl^-, SeO₄ ^2-)species at pH 2.6. An increase of pH or an addition of 5% or 10% decanol in CHCl₃ favors the extraction of SeO₄ ^2- over HSeO₄ ^- but leads to a drastic decrease of seleniumextraction. Cr(VI) was shown to be extracted as(LH₂ ²⁺, Cl^-, HCrO₄ ^-) at pH 2.6 and probably as (LH⁺, HCrO₄ ^-) for higher pH.     

Comparison of pillar[5]arene and calix[4]arene anion receptor ability in aqueous media

Abstract

Recognition ability of both cationic pillar[5]arene and calix[4]arene has been studied in aqueous media. Anion complexation can be evaluated from their ability to complex their counterions as well as an added external organic anion. DOSY NMR experiments and fluorescence quenching show that pillararenes have a larger ability for including their own counterions than calixarenes irrespective of the anion (tetrafluoroborate or chloride or bromide) and the structure of the cationic moiety (trimethylammonium or methylimidazolium). Counterion complexation shows a picture where four to five positive charges of the pillar[5]arene are neutralised, meanwhile only one positive charge of the calixarene is neutralised for a 1 mM solution of the macrocycle. Irrespective of the smaller net positive charge in the pillar[5]arene, its binding ability for organic anions (toluenesulfonate or hydroxybenzoate) is larger than for calix[4]arene allowing a better accommodation of the guest in its cavity. The larger separation between the cationic groups of the receptor and its electron-rich aromatic region improves the anion recognition ability for pillar[5]arene.     

四乙氧羰基甲氧基杯[4]芳烃的合成与性质

配位作用;液膜传递;四乙氧羰基甲氧基杯[4]芳烃的合成与性质     

Anion influence on extraction and transport of amino acid methyl esters by functionalised calix[4]arene

The liquid–liquid extraction of a series of amino acid methyl esters has been carried out with functionalised calix[4]arene (5,11,17,23-tetrakis(N-methylpiperazino)-25,26,27,28-tetrahydroxycalix[4]arene) from an aqueous phase into a chloroform phase as ion pairs in the presence of picrate ion or tropaeolin 00 as counter ion in order to study the molecular recognition properties of this receptor. The active transport assisted by pH gradient of amino acids as ion pairs through liquid membrane employing the functionalised calix[4]arene as carrier has been investigated. The results showed that the receptor exhibits good extractability towards amino acids and it can also act as carrier through liquid membrane aiming to the separation of amino acids. It was highlighted that the anion nature used as counter ion, the structure of calix[4]arene, and the structure of amino acids are responsible for the experimental results obtained. High yields in both amino acids extraction and transport were obtained for picrate ion used as counter ion.     

Structures and properties of solvated and unsolvated isopropyl functionalised calix[4]arenes

The tetra-isopropyl ethers of calix[4]arene and p-t-butylcalix[4]arene have been isolated in the cone conformation, and structurally characterised as chloroform solvates. Thermogravimetric analysis demonstrated that the parent isopropylcalix[4]arene solvate is significantly more stable than the p-t-butylcalix[4]arene analogue, retaining the solvent up to a temperature of 125°C. It was found that the calix[4]arene ether sublimes at atmospheric pressure, and solvent-free crystals appropriate for structure determination were produced at reduced pressure. The p-t-butylcalix[4]arene ether was also isolated without solvent in the lattice, but in this case the calixarene was crystallised from acetone, as sublimation did not produce crystals of sufficient quality.     

Spectroscopic studies of water-soluble sulfonated calix[6]arene

Fluorescence and absorption studies of water-soluble sulfonated calix[6]arene (SCX6) are reported. Water-soluble calixarenes are potentially useful as host molecules for luminophores, and studies of their spectroscopic characteristics are therefore crucial. The absorption and fluorescence spectra of these molecules in aqueous solution were collected, analyzed, and compared with 4-hydroxybenzene sulfonate at different pHs. A red shift in the absorption spectrum and a change in the fluorescence spectrum of the calixarenes are observed upon an increase in pH from 2.0 to 13.0. Some of these spectroscopic changes are attributed to intramolecular hydrogen bonding between adjacent hydroxyl groups of SCX6 after proton disassociation. The formation of excimers between phenolic groups in the calixarene molecule is proposed. In addition, inner-filter effects of SCX6 are discussed. These inner-filter effects prove to be a disadvantage for the use of SCX6 as a host molecule for complexation studies by use of fluorescence probes whose absorption spectra overlap with those of calixarenes.     

杯芳烃衍生物的合成和性质的研究5

通过对特丁基杯(4)芳烃的酚羟基的选择性醚化制备了一系列一烃基,1,3-二烃基和四烃基醚,烃基分别含有缩醛、酰胺、氰基等活泼官能团。醚化反应的区域选择性主要取于使用的碱的种类和反应时间的长短。     

Synthesis and extraction studies of polymeric phthalimido functionalized calix[4]arene

The article comprises synthesis and extraction studies of polymeric calix[4]arene having phthalimide groups at the lower rim. The polymeric phthalimido functionalized calix[4]arene was synthesized via radical initiated reactions involving a vinylic monomer 5,11,17,23-tetra-tert-butyl-25-[4-(acrylamido)benzyloxy]-26,28-bis-(2-phthalimido-ethoxy)-27-hydroxycalix[4]arene (5) with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. From the liquid–liquid and solid–liquid extraction studies it has been concluded that the precursor 3 (5,11,17,23-tetra-tert-butyl-25-(4-nitro benzyloxy)-26,28-bis-(3-phthalimidoethoxy)-27-hydroxy-calix[4]arene) is selective for metal cations. The order of extractability of metal cations by the ligand 3 decreases in the sequence: Hg²⁺ > Cd²⁺ > Cu²⁺ > K⁺ > Co²⁺ whereas its polymeric derivative is selective in the sequence: Hg²⁺ > Cd²⁺ > K⁺ > Co²⁺ > Cu²⁺ for the metal cations used in the experiments.     

Synthesis and cationic selectivity studies of novel calix[4]arene derivatives containing heteroatom at the lower rim

A series of calixarene derivatives 2―5 containing heteroatom at the lower rim have been synthesized. 1H NMR studies and crystallographic structures demonstrated that the calix[4]arene derivatives adopted cone conformations. Their cationic binding abilities and selectivities towards heavy and tran- sition metal ions have been evaluated by solvent extraction of aqueous metal picrates. The obtained results indicated that the introduction of nitrogen, sulfur, and/or phosphor atoms to the calix[4]arene framework could effectively enhance their binding ability and selectivity for heavy and transition metal ions, such as Pb2 or Ag .     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

杯[4]芳烃单取代1,3-二酮衍生物的合成及生物活性研究

以杯[4]芳烃为原料经醚化和克莱森缩合两步反应首次合成杯[4]芳烃单取代1,3-二酮衍生物,其结构经1H NMR、13C NMR及MS表征。初步的HIV-1整合酶链转移反应活性测试结果表明,该杯[4]芳烃单取代1,3-二酮衍生物在测试浓度为25μM时其抑制率为12.67%。     

Liquid-liquid extraction of transition and alkali metal cations by a new calixarene: Diphenylphosphino calix[4]arene methyl ether

The liquid-liquid extraction of various metal ions by a diphenylphosphino calix[4]arene (1) using picrate counter ion has been studied and compared with those ofp-tert-butyl-calix[4]arene methyl ether (2) and triphenylphosphine (3). The calixarene 1 shows strong binding ability to almost all metal cations examined, but calixarene 2 shows little ability to extract any of them. Based on the continuous variation method, calixarene 1 formed 1: 2 complexes with copper(II) ion.     

Liquid crystalline behavior and fluorescent property of calix[4]arene containing azobenzene photochromic group

The reaction of 4′-hydroxy-4-methyl azobenzene (1) and 1,6-dibromohexane afforded 6-bromo-1-((4-((4-met hylphenyl)azo)phenyl)oxy)hexane (2), which further reacted with p-tert-butylcalix[4]arene to give the calix[4]arene derivative (3) whose lower rim had been modified by the azobenzene photochromic group. The structure of 3 was characterized by ¹H-nuclear magnetic resonance (NMR) and electrospray ionization-mass spectrometry (ESI-MS). The fluorescence intensity of compound 3 was two to four times higher than that of compounds 1 and 2 as the azobenzene group concentration in the range of 1.6 × 10⁻⁵ to 8.0 × 10⁻⁴ mol/L, indicating that the fluorescence quantum yield of the azobenzene group had been improved through being attached to the calix[4]arene skeleton. The liquid crystalline behavior of compound 3 was studied by polarized microscopy (POM) and differential scan calorimeter (DSC). Compound 3 exhibited the enchased texture of a smectic liquid crystal from 209.4°C to 219.5°C on heating, while 2 exhibited a liquid crystalline phase from 87.4 to 83.2°C on cooling. It was found that the calix[4]arene skeleton was a good platform for conformation immobilization of azobenzene photochromic group and the formation of liquid crystalline. Translated from Chinese Journal of Applied Chemistry, 2006, 23(9): 1023–1026 [译自: 应用化学]     

Tetra-Substituted p-Tert-Butylcalix[4]Arene with Phosphoryl and Salicylamide Functional Groups: Synthesis,Complexation and Selective Extraction of f-Element Cations

A new series of lanthanide ( 1 – 5 ) and uranyl ( 6 ) complexes with a tetra-substituted bifunctional calixarene ligand H₂L is described. The coordination environment for the Ln³⁺ and UO₂²⁺ ions is provided by phosphoryl and salicylamide functional groups appended to the lower rim of the p-tert-butylcalix[4]arene scaffold. Ligand interactions with lanthanide cations (light: La³⁺, Pr³⁺; intermediate: Eu³⁺ and Gd³⁺; and heavy: Yb³⁺), as well as the uranyl cation (UO₂²⁺) is examined in the solution and solid state, respectively with spectrophotometric titration and single crystal X-ray diffractometry. The ligand is fully deprotonated in the complexation of trivalent lanthanide ions forming di-cationic complexes 2 : 2 M : L , [Ln₂( L )₂(H₂O)]²⁺ ( 1–5 ), in solution, whereas uranyl formed a 1 : 1 M : L complex [UO₂( L )(MeOH)]_∞ ( 6 ) that demonstrated very limited solubility in 12 organic solvents. Solvent extraction behaviour is examined for cation selectivity and extraction efficiency. H₂L was found to be an effective extracting agent for UO₂²⁺ over La³⁺ and Yb³⁺ cations. The separation factors at pH 6.0 are: β_{UO /La} =121.0 and β_{UO /Yb} =70.0.     

Synthesis and Extraction Studies of a Versatile Calix[4]arene-Based “Proton-Switchable Extractant” for Toxic Metals and Dichromate Anions

The article describes the syntheses and extraction properties of a new calixarenebased extractant 5, which has been synthesized from5,11,17,23-tetra-tert-butyl-25,27-bis(chlorocarbonyl-methoxy)-26,28-dihydroxycalix[4]arene(4) by treatment with isoniazid (isonicotinic acid hydrazide) in the presence ofpyridine. The compound 5 was converted to its methyl iodide salt (6) by refluxing 5 with methyl iodide in acetonitrile. In this synthesis it was thought to explore the role of pyridinium sites in the extraction of HCr₂O ₇ ^- /Cr₂O ₇ ^2- anions. The complexing properties of 5 toward selected alkali/transition metal cationsand HCr₂O ₇ ^- /Cr₂O ₇ ² - anions are reported. It has been observed that receptor 5 does not extract alkali metal cations but shows an excellent selectivity toward transition metals. The protonated pyridinium form of 5 is an effective formfor transferring the HCr₂O ₇ ^- /Cr₂O ₇ ^2- anions from an aqueous into adichloromethane layer.     

Interactions of a water-soluble calix[4]arene with spermine: solution and solid-state characterisation

Abstract

The octaanionic 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)-calix[4]arene (cone conformation) (C₄TsTc) was investigated as a sensor for the biogenic tetracationic polyamine, spermine _.(H₄Spe⁴⁺). Fluorescence titration experiments of the water-soluble calixarene with spermine showed the formation of the 2:1 and 1:1 calixarene:spermine complexes in solution. The single crystal X-ray diffraction analysis of [(NaC₄TsTc)₄·(H₄Spe)₇] confirmed the formation of 2:1 and 1:1 calixarene:spermine species and showed that the water-soluble calixarene binds the spermine either by partially hosting it in the inner cavity or through the carboxylate groups on the lower rim. In order to investigate the effect of multivalent systems, supramolecular assemblies of octaanionic calixarene molecules templated by meso-tetrakis(4-N-methylpyridyl)porphyrin (H₂T₄) in different stoichiometric porphyrin:calixarene ratios (1:4 and 3:4) were also tested for spermine binding in solution. Fluorescence titration experiments with the 1:4 and 3:4 H₂T₄:C₄TsTc supramolecular complexes showed that the multivalent assemblies are more sensitive to the presence of spermine than the calixarene alone.