New polymer synthesis. IX. Synthesis of poly(ether sulfone)s from silylated diphenols or hydroxybenzoic acids

The condensation polymerizations of bis(4-flurophenyl) sulfone with the bistrimethylsilyl derivates of bisphenol-A, 4,4′-dihydroxydiphenyl sulfone, 1,5′-dihydroxynaphthalene, 3-hydroxybenzoic acid, and 4-hydroxybenzoic acid were investigated. These polycondensations were only successful when potassium or cesium fluoride was used as catalyst. The yields were in the range of 91–98% and the number molecular weights in the range of 2,500–17,500 depending on the reaction conditions. Viscosity and GPC measurements were conducted and glass transitions were determined. Crystallization was never observed.     

New polymer syntheses. CXI. Aliphatic polyesters by the ring‐opening polycondensation of glutaric anhydride with ethylene or trimethylene carbonate

Several polycondensations of ethylene carbonate with succinic anhydride or glutaric anhydride (GA) were conducted in bulk. Low molar mass polyesters were obtained with pyridine‐type catalysts and GA. Analogous polycondensations of trimethylene carbonate (TMC) and GA were successful when quinoline, 4‐(N,N‐dimethylamino)pyridine, or BF₃ · OEt₂ was used as a catalyst. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed the formation of cyclic oligoesters and polyesters by backbiting degradation. Monomer mixtures containing an excess of TMC yielded copoly(ester carbonate)s with number‐average molecular weights up to 16,000 Da. Analogous copoly(ester carbonate)s were obtained from TMC and 3,3′‐tetramethylene glutaric anhydride. Furthermore, combined polycondensation/ring‐opening polymerization reactions of TMC and GA with L ‐lactide or ?‐caprolactone were studied. All copolymers were characterized by viscosity measurements and by IR, ¹H, and ¹³C NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4357–4367, 2002     

New polymer syntheses. LXVI. Copolyester of 4-hydroxybenzoic acid and 3-(4'-hydroxyphenoxy)benzoic acid or 4-(3'-hydroxyphenoxy)benzoic acid

Copolyesters of 4-hydroxybenzoic acid (HBA) and 3-(4'-hydroxyphenoxy)benzoic acid were prepared by two different procedures. Either the acetyl derivatives were polycondensed in bulk at temperatures up to 300°C or they were polycondensed in an inert reactions medium (Marlotherm-S) at 340°C. Two analogous series of copolyesters were synthesized from 4-acetoxybenzoic acid (4-HBA) and 4-(3'-acetoxyphenoxy)benzoic acid. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- and ¹³C-NMR spectroscopy, WAXS and DSC measurements, and by optical microscopy. All copolyesters synthesized in solution were highly crystalline materials which were neither meltable nor soluble. Part of the copolyesters prepared by polycondensation in bulk were semi-crystalline, meltable, and soluble. The copolyester derived from 3-(4'-hydroxyphenoxy)benzoic acid proved to be thermotropic forming a nematic melt, whereas the isomeric copolyesters of 4-(3'-hydroxyphenoxy)benzoic acid only formed isotropic melts. © 1993 John Wiley & Sons, Inc.     

New polymer syntheses. XC. A–B–A triblock copolymers with hyperbranched polyester A-blocks

Telechelic oligo(ether–ketone)s containing two trimethylsiloxy end groups and one methyl group per repeating unit were prepared by polycondensation of 4-fluoro-2′-methyl-4′-(trimethylsiloxy)benzophenone. The telechelic character was achieved by cocondensation of a small amount of silylated bisphenol-P. The end groups of the silylated oligo(ether–ketone)s were acetylated by means of acetyl chloride. On the basis of ¹H-NMR end group analyses two samples of α,ω-bis(acetoxy) oligo(ether–ketone)s with DP = 14 and DP ∼ 28 were obtained. These oligo(ether-ketone)s and a 70 or 140 fold molar amount of silylated 3,5-bis(acetoxy)benzoic acid were polycondensed at 270°C in bulk. The resulting A–B–A triblock copolymers were fractionated by dissolution in tetrahydrofuran. In three out of four experiments a small fraction of precipitated material rich in oligo(ether–ketone) was isolated. The purified triblock copolymers were characterized by inherent viscosities and NMR spectra. For those samples containing the long oligo(ether–ketone) block a low degree of crystallinity was observed after annealing. Four additional polycondensations were conducted with an initial reaction temperature of 290°C. In this way a completely soluble and amorphous triblock copolymer was obtained. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 31–38, 1998     

New Polymer Syntheses. 80. Linear,Star-Shaped,and Hyperbranched Poly(Ester-Amide)s from Silicon-Mediated One-Pot Condensations of 3-Acetoxy-, 3,5-Bisacetoxybenzoic Acid,and 3-Aminobenzoic Acid

Abstract

Acylation of N,O-bistrimethylsilyl-3-aminobenzoic acid with 3-acetoxybenzoylchloride yielded the trimethylsilylester of N-(3′-acetoxybenzoyl)-3-aminobenzoic acid, which was polycondensed in situ at 260 or 280°C. Cocondensation with acetylated tetraphenols yielded four-arm star copolymers with a random or preferentially alternating sequence of 3-hydroxy and 3-aminobenzoyl units. Due to ester-amide exchange detected by ¹H- and ¹³C-NMR spectroscopy, the sequences were never perfectly alternating. Methyl groups attached to the star centers allowed the determination of degrees of polymerization by ¹H-NMR spectroscopy. Acylation of N,O-bistrimethylsilyl-3-amino benzoic acid with 3,5-bisacetoxybenzoylchloride yielded a trifunctional monomer, the polycondensation of which yielded a hyperbranched poly(ester-amide). By cocondensation of the trifunctional monomer with acetylated tetraphenyl, star-shaped poly(ester-amide)s with four hyperbranched star arms were obtained. All these poly(ester-amide)s are amorphous materials with glass-transition temperatures in the 190–200°C range and good solubility in polar organic solvents.     

Synthesis and Enzymatic Degradation of Aliphatic Polyesters Copolymerized with Trimesic Acid

Abstract

Network copolyesters were made from adipic acid and ethylene glycol with 10–40 mol% trimesic acid (Y). Prepolymers prepared by melt polycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for various times to form a network. The degree of reaction (D _R), estimated from the infrared absorbance of hydroxyl and methylene groups, increased with increasing postpolymerization time and leveled out at about 90% after 4–6 hours. Heat distortion temperatures (T _h) measured by thermomechanical analysis increased greatly from ?83 to 48°C upon the incorporation of Y. Wide-angle x-ray diffraction patterns showed that the copolymer films are amorphous. Density, tensile strength, and Young's modulus decreased for the copolymers with 10–30 mol% Y, whereas they increased drastically for the copolymer with 40 mol% Y. The enzymatic degradation was estimated by the weight loss of the copolymer films in buffer solutions with a lipase at 37°C. The weight loss decreased remarkably with increasing Y and showed no weight loss for the copolymer with 40 mol% Y. On the other hand, the weight loss by alkali hydrolysis increased for the copolymers with 10 and 20 mol% Y, implying a difference in the degradation mechanism between enzymatic degradation and alkali hydrolysis.     

Thermotropic copolyesters of 4-hydroxybenzoic acid

Copolyesters of 4-hydroxybenzoic acid were prepared by thermal polycondensation of 4-acetoxybenzoic acid with various acetylated comonomers, such as 4-mercaptobenzoic acid, 3-hydroxybenzoic acid, N-(4-carboxyphenyl)4-hydroxyphthalimide or hydroquinone in combination with 1,12-dodecane bistrimellitimide. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- or ¹³C NMR spectroscopy, DSC-measurements, WAXS-measurements at temperatures between 25 and 425°C, microscopic observation, thermomechanical and thermogravimetrical analyses. Copolyesters containing 4-mercaptobenzoic acid or N-(4-carboxyphenyl)4-hydroxyphthalimide possess a reversible first order phase transition which represent a change of modifications and not a melting process. Both classes of copolyesters adopt the same kind of high temperature modification as poly(4-hydroxybenzoate), namely a pseudo-hexagonal chain packing. In contrast, copolyesters of 3-hydroxybenzoic acid or copoly(ester imide)s with aliphatic spacer containing more than 50% 4-hydroxybenzoic acid form a nematic phase over a broad temperature range. However, in the case of copolyesters derived from 3- and 4-hydroxybenzoic acid the homogeneous nematic melt is thermodynamically unstable and gradually turns into a heterogeneous more or less crystalline material with blocks of 4-hydroxybenzoate units.     

Influence of Isosorbide on Glass‐Transition Temperature and Crystallinity of Poly(butylene terephthalate)

Copolyesters of isosorbide and 1,4‐butane diol were prepared by Ti(OBu)₄‐catalyzed transesterifications with dimethyl terephthalate in bulk at temperatures up to 250°C. The content of isosorbide was considerably lower than expected from the feed ratio and the molar masses were low, so that no DSC measurements were conducted. Copolycondensations of isosorbide and 1,4‐butane diol with terephthaloyl chloride were either performed in dichloromethane at 40°C or in toluene at 100°C. The second method gave the higher molar masses. However, both series of polycondensations had the content of isosorbide roughly paralleled the feed ratios in common. The DSC measurements revealed that even 6 mol% of isosorbide is sufficient to raise the glass‐transition temperature (T_g) by 10–12°C (up to 55°C). With 50 mol% of isosorbide, the T_g reaches 100°C. Yet, incorporation of isosorbide also reduces the melting temperature T_m and the degree of crystallinity, and a mol percentage above 30% prevents crystallization completely. In summary, incorporation of isosorbide allows for fine‐tuning of T_g and T_m of poly(butylene terephthalate) over a wide range.     

Effects of elicitors on the enhancement of asiaticoside biosynthesis in cell cultures of centella (Centella asiatica L. Urban)

In this work, the effects of elicitor concentration and elicitation day on the growth and asiaticoside production of centella cells were investigated. The results showed that 2-hydroxybenzoic acid from 50?C200 ??M and yeast extract from 2?C5 g L^?1 had different eliciting influences. The addition of 2-hydroxybenzoic acid and yeast extract to the cultures strongly enhanced asiaticoside production in centella cells. The increase in asiaticoside content induced by the addition of 100 ??M of 2-hydroxybenzoic acid and 4 g L^?1 of yeast extract at day 10 of inoculation was about 5- and 3.5-fold, respectively, as compared with that of the reference cells. In general, 2-hydroxybenzoic acid (abiotic elicitor) was more effective in enhancing asiaticoside biosynthesis than yeast extract (biotic elicitor).     

New Poly(Bismaleimide-Ether)s Containing Functional Pendant Carboxylic Groups

Abstract

New poly(bismaleimide-ether)s with functional pendant groups were synthesized by Michael addition polymerization of two monomers with functionality f > 2 (DL tartaric acid and methylene-5,5′disalicylic acid) to various bismaleimides with flexible groups (N,N'-4,4′-diphenyl-methanebismaleimide, N,N'-4,4′-diphenyletherbismaleimide and N,N'-4,4′-dibenzylbismaleimide). The polymerization occurred in solution, through the addition of the OH groups to the C[dbnd]C double bond of the maleimide rings. The polymers were obtained in good yields and they were characterized by elemental analysis, IR and ¹H NMR spectra, thermogravimetric analysis and viscozimetry.     

Macrocycles IV. Macrocyclic polylactones as bifunctional monomers for polycondensations

Tin containing macrocyclic polylactones were prepared by di-n-butyl-2-stanna-1,3-dioxepane-initiated polymerizations of ε-caprolactone in bulk. The average ring size was varied from 10 to 100 monomer units via the monomer/initiator (M/I) ratio. Addition of terephthaloyl or sebacoyl chloride to the in situ prepared macrocycles yielded polycondensates under elimination of di-n-butyl tin dichloride. The molecular weights increased with the reaction temperature (e.g., 80–140°C) and with the size of the macrocycles. Number-average molecular weights (M_ns) up to 90,000 and polydispersities between 1.65 and 2.0 were obtained. Further polycondensations were conducted with isophthaloyl chloride, 4,4′-biphenyldicarbonylchloride and 4,4′-phenylenebisacryloylchloride. Several polycondensations were performed with macrocyclic poly (δ-valerolactone) and poly (β-D ,L -butyrolactone). In those cases the increase of the molecular weight was lower. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1373–1378, 1998     

Synthesis and characterization of new polyimides containing calix[4]arenes in the polymer backbone

Two diaminocalix[4]arene monomers were synthesized from p-tert-butylcalix[4]arene through a 4-step reaction sequence. New copoly(amic acid)s containing calix[4]arene moieties on the polymer backbone were successfully synthesized in N-methyl-2-pyrrolidone by polycondensations of 4,4′-oxydiphthalic anhydride (ODPA) with the diaminocalix[4]arene monomers using 4,4′-oxydiphenylene diamine (ODA) as a comonomer. These copoly(amic acid)s were soluble in aprotic polar solvents, so that they can be processed in various ways. The copoly(amic acid) precursors were thermally converted to the corresponding copolyimides in films. The copolyimide films are amorphous, but insoluble in common solvents. They are thermally stable up to 366°C. The copolyimides exhibit relatively high TEC's, low T_g's, low refractive index, low dielectric constant, low optical anisotropy, low dielectric anisotropy, and low water uptake, compared to those of conventional ODPA-ODA polyimide. These property characteristics were interpreted in regard to bulky, cone-like calix[4]arene moieties and their effects on the chain conformation and morphological structure. The processability and property characteristics support that both of the copolyimides containing calix[4]arene moieties are potential candidate materials suitable for membranes, antioxidant additives, chemical sensor devices, and microelectronic devices. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2013–2026, 1999     

Synthesis and characterization of modular polyphosphonate homopolymers and copolymers

Linear polyphosphonates with the generic formula –[P(Ph)(X)OR′O]_n– (X = S or Se) have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and a diol (HOR′OH = 1,4-cyclohexanedimethanol, 1,4-benzenedimethanol, tetraethylene glycol, or 1,12-dodecanediol) followed by reaction with a chalcogen. Random copolymers have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and mixture of two of the diols in a 2:1:1 mol ratio followed by reaction with a chalcogen. Block copolymers with the generic formula –[P(Ph)(X)OR′O]_{(x + 2)} –[P(Ph)(X)OR′O]_{(x + 3)}– (X = S or Se) have been synthesized by the polycondensations of Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers with HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers followed by reaction with a chalcogen. The Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers are prepared by the reaction of an excess of P(Ph)(NEt₂)₂ with a diol while the HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers are prepared by the reaction of P(Ph)(NEt₂)₂ with an excess of the diol. In each case the excess, x is the same and determines the average block sizes. All of the polymers were characterized using ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy, TGA, DSC, and SEC. ³¹P{¹H} NMR spectroscopy demonstrates that the random and block copolymers have the expected arrangements of monomers and, in the case of block copolymers, verifies the block sizes. All polymers are thermally stable up to ~300°C, and the arrangements of monomers in the copolymers (block vs. random) affect their degradation temperatures and T_g profiles. The polymers have weight average MWs of up to 3.8 × 10⁴ Da.     

Characterization of Nitro-Substituted Polybenzimidazole Synthesized by the Reaction with Nitric Acid

Abstract

Nitro-substituted poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole]s (PBIs) were synthesized by the reaction of PBI with nitric acid in sulfuric acid under various conditions. The number of nitro groups substituted on the aromatic ring of PBI per polymeric unit varied from 1.44 to 3.55 according to the reaction conditions. An increase in reaction temperature and concentration of the nitric acid increased the degree of substitution. The inherent viscosity of the substituted polymer increased as the reaction temperature decreased. When the reaction temperature was 30°C, the inherent viscosity of the polymer increased as the concentration of nitric acid increased. The nitro-substituted PBI exhibited polyelectrolyte behavior in formic acid. The nitro groups substituted on PBI were dissociated when the polymer was heated to 450°C, displaying exothermic behavior, and the decomposition of polymer was proportional to its nitro group content. All nitro-substituted PBIs showed better solubilities in polar aprotic and acidic solvents, such as dimethylacetamide, dimethylsulfoxide, dimethylformamide, N-methylpyrrolidone, formic acid, sulfuric acid, and trifluoromethanesulfonic acid.     

Unusual Sulfuric Acid-Induced Thiol Oxidation on Dehydrative Cyclization of Potassium N′-(1-Adamantylcarbonyl)Dithiocarbazate at Room Temperature

Abstract

The dehydrative cyclization of potassium N′-(1-adamantylcarbonyl)dithiocarbazate 4 with sulfuric acid was studied under several conditions. Treatment of compound 4 with sulfuric acid at room temperature yielded a separable mixture of 5-(1-adamantyl)-1,3,4-thiadiazole-2-thiol 5 and 1,2-bis[5-(1-adamantyl)-1,3,4-thiadiazol-2-yl]disulfide 6. The reaction product (5:6) ratio was found to be time and temperature dependent. Thiol 5 was obtained as the sole product on dehydrative cyclization of 4 at 0°C. Meanwhile, disulfide 6 was obtained as the major product (55%) on carrying out the reaction at room temperature for 36 h, in addition to thiol 5 as a minor product (16%). The structure of the oxidized thiol 6 was confirmed by ¹H and ¹³C NMR, HR-MS, and independent synthesis via oxidation of thiol 5 with dimethylsulfoxide.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

Liquid crystalline lonomers. I. Main-chain liquid crystalline polymer containing pendant sulfonate groups

Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.     

Some aspects of polybenzimidazoles’ synthesis in Eaton reagent under different temperatures and microwave irradiation

Solution polycondensations of 3,3′-diaminobenzidine with two dicarboxylic acids, 4,4′-oxybis(benzoic acid) and hexafluoroisopropylidene bis(benzoic acid) to obtain two different polybenzimidazoles, OPBI and CF₃PBI, correspondingly, were studied in terms of formation of processable polymers and insoluble crosslinked gel. The syntheses were conducted in Eaton’s reagent using conventional heating (CH) at 100, 140 and 180?°C and microwave irradiation (MW) at 90 and 100?°C. The content of gel fraction was lesser using high temperature conditions under CH. The MW-assisted syntheses resulted in acceleration of polycondensations, but an abrupt growth of the insoluble gel was also observed under these conditions. The FTIR data showed that MW irradiation stimulated the side acylation reactions, and OPBI suffered more from the side acylation than CF₃PBI.     

Phenolic constituents from Wissadula periplocifolia (L.) C. Presl. and anti-inflammatory activity of 7,4′-di-O-methylisoscutellarein

This study reports the first phenolics from Wissadula genus (Malvaceae) and the anti-inflammatory activity of 7,4′-di-O-methylisoscutellarein. Using chromatographic methods, five phenolic compounds were isolated from aerial parts of Wissadula periplocifolia (L.) C. Presl. The compounds were identified as 4-hydroxybenzoic acid, 3-hydroxybenzoic acid, trans-cinnamic acid, tamgermanetin and 7,4′-di-O-methylisoscutellarein using spectroscopic methods. The flavone 7,4′-di-O-methylisoscutellarein showed anti-inflammatory activity by inhibiting neutrophils recruitment in a mice model of pleurisy and by decreasing significantly the production of cytokines IL-1β and TNF-α.     

Synthesis and Properties of Aromatic Poly(Ether Sulfone)s and Poly(Etherketone)s Containing Naphthalene or Quinoline Units,and Methyl-Substituted Biphenyl-4,4′-Diols

Abstract

A series of poly(ether sulfone)s and poly(ether ketone)s were synthesized from combinations of 1,5- and 2,6-bis(4-fluorosulfonyl)naphthalene, 2,6-bis(4-fluorobenzoyl)naphthalene, and 2,6-bis(4-fluorobenzoyl)quinoline with 3,3′,5,5′-tetramethylbiphenyl-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol. The polycondensations proceeded quantitatively in diphenylsulfone in the presence of anhydrous potassium carbonate to afford polymers with inherent viscosities between 0.40 and 1.28 dL/g measured in N-methyl-2-pyrrolidone or concentrated sulfuric acid. The tetramethyl- and hexamethyl-substituted aromatic polyethers exhibited good thermal stability, did not decompose below 330°C in both air and nitrogen atmospheres, and had higher glass transition temperatures than the corresponding unsubstituted polymers. The methylsubstituted poly(ether sulfone)s and poly(ether ketone)s showed good solubility in such common organic solvents as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, tetrahydrofuran, chloroform, and 1,4-dioxane.