Complexation of metal ion with poly(1-vinylimidazole) resin prepared by radiation-induced polymerization with template metal ion

Poly(1-vinylimidazole) (PVI) resin was prepared with Ni²⁺, Co²⁺, or Zn²⁺ as a template to study the adsorption of metal ions. The metal-1-vinylimidazole complex was copolymerized and crosslinked with 1-vinyl-2-pyrrolidone by γ-ray irradiation and the template metal ion was removed by treating the polymer complex with an acid. These PVI resins adsorbed metal ions more effectively than the PVI resin prepared without the template. The number of adsorption sites (As) and the stability constant (K) of Ni²⁺ complex were larger for the PVI resin prepared with the Ni ion template, caused by the smaller dissociation rate constant of Ni ion from the resin. The composition of the Ni²⁺ complex in the resin remained constant. This suggests that the complexation proceeded via a one-step mechanism.     

Synthesis and Chelating Properties of Polystyrene Supported Schiff Base (N,N′-disalicylidenepropylenetriamine) Resin Toward Some Divalent Metal Ions

A new polystyrene-supported Schiff base resin, N,N-bis(salicylidenepropylenetriamine)- aminomethyl polystyrene, has been synthesized through a reaction between the commercially available 4-chloromethyl polystyrene polymer and the Schiff base, N,N′-disalicylidenepropylenetriamine. The chelation behavior of this resin toward the divalent metal ions Cu^{2 +}, Ni^{2 +}, Zn^{2 +}, and Pb^{2 +} in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, polymer mass, and temperature. The amount of metal-ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS). Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu^{2 +} and that the metal-ion uptake follows the order: Cu^{2 +} > Zn ^{2 +} > Ni^{2 +} > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

Strategies for protein-based nanofabrication: Ni-NTA as a chemical mask to control biologically imposed symmetry

Background: Technologies that improve control of protein orientation on surfaces or in solution, through designed molecular recognition, will expand the range of proteins that are useful for biosensors, molecular devices and biomaterials. A limitation of some proteins is their biologically imposed symmetry, which results in indistinguishable recognition surfaces. Here, we have explored methods for modifying the symmetry of an oligomeric protein that exhibits useful self-assembly properties.Results:Escherichia coli glutamine synthetase (GS) contains 24 solvent-exposed histidines on two symmetry-related surfaces. These histidines drive a metal-dependent self-assembly of GS tubes. Immobilization of GS on the affinity resin Ni²⁺-NTA followed by on-column modification with diethyl pyrocarbonate affords asymmetrically modified GS that self-assembles only to the extent of ‘short’ dimeric GS tubes, as demonstrated by electron microscopy, dynamic light scattering and atomic force microscopy. The utility of Ni²⁺-NTA as a chemical mask was also demonstrated for asymmetric modification of engineered cysteines adjacent to the natural histidines.Conclusions: Current genetic methods do not provide distinguishable recognition elements on symmetry-related surfaces of biologically assembled proteins. Ni²⁺-NTA serves as a mask to control chemical modification in vitro of residues within symmetry-related pairs, on proteins containing functional Histags. This strategy may be extended to modification of a wide range of amino acids with a myriad of reagents.     

A (1→4)-β-D-Glucuronan Excreted by a Mutant of the Rhizobium Meliloti M5N1 Strain

Abstract

A mutant of the R. meliloti M5N1 strain has been selected. This strain, R. meliloti M5N1 CS (NCIMB 40472), excretes an extracellular material composed of 2-O-Ac-β-GlcpA, 3-O-Ac-β-GlcpA, 2,3-di-O-Ac-β-GlcpA and three species of β-GlcpA residues 1→4 linked. For the culture conditions used, the weight average molecular weight of the polymer varied in the range of 6 × 10⁴ < Mw < 4 × 10⁵. High molecular weight glucuronate forms thermoreversible gels at 5 g L^?l. In the presence of divalent cation such as Ca²⁺ or trivalent cations such as Cr³⁺ or Fe^{3 +}, cross linking of the polymer occurs. This polysaccharide is the first exocellular (1→4)-β-D-glucuronan produced by a R. meliloti strain.     

Preparation and characterisation of thiol functionalised p-tert-butylcalix[4]arene-embedded polymer inclusion membranes: performance and selectivity

ABSTRACT

Here in we report the syntheses of the thiol functionalised p-tert-butylcalix[4]arene from the reaction of p-tert-butylcalix[4]arene-dialkylbromide derivative with thiourea. The structure of the thiol functionalised p-tert-butylcalix[4]arene was determined by using ¹HNMR, ¹³CNMR and elemental analysis techniques. Furthermore, the thiol functionalised p-tert-butylcalix[4]arene, cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPPE) in dichloromethane were used to make a new calixarene-embedded polymer inclusion membrane (Bu^t-C@PIM). The surface and structure morphology of Bu^t-C@PIM was detected using thermogravimetric analysis, elemental analysis techniques and scanning electron microscopy. The affinity (the percentage of metal ion transferred from the source solution) of a PIM towards a range of divalent cations was found to follow the order Pb²⁺ > Zn²⁺ > Ni²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺. The results also indicated that the transport efficiency of Bu^t-C@PIM was repeatable and may be beneficial in the development of a simplistic and highly influential trace metal recovery method from aqueous solution.     

Surface‐initiated ring‐opening polymerization of p‐dioxanone on Wang resin bead

Biodegradable poly(p‐dioxanone) (PPDO) was formed on Wang resin surface by surface‐initiated ring‐opening polymerization (SI‐ROP). The SI‐ROP of p‐dioxanone (PDO) was achieved by heating a mixture of Tin(II) bis(2‐ethylhexanoate) [Sn(Oct)₂], hydroxyl functionalized Wang resin, and PDO in anhydrous toluene at 80 °C. The resultant polymer‐grafted Wang resin (Wang‐g‐PPDO) was characterized by fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), optical microscopy (OM), and field‐emission scanning electron microscopy (FE‐SEM). The FTIR spectra of Wang‐g‐PPDO show peak characteristic of PPDO at 2943 cm^?1 (? C? H stretch), at 1741 cm^?1 (? C?O stretch), and 1136 cm^?1 (C? O? C stretch) indicating the formation of ester linkage between PPDO and hydroxyl terminated Wang resin. The DSC thermogram show melting peak corresponding to PPDO polymer on Wang resin surface. Thermogravimetric investigation shows increase in PPDO content on the Wang resin surface in terms of percentage of weight loss with increase in reaction time. The OM and SEM photographs clearly show the formation of PPDO polymer on the Wang resin surface without altering the spherical nature of Wang resin bead. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1178–1184, 2008     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Kinetic Study of Metals Sorption on a Resin Modified with Tetrakis(carboxyphenyl)Porphyrin

 The sorption of metal ions (e.g. Cd²⁺, Cu²⁺, Ni²⁺ and Pb²⁺) from aqueous solution on the anion exchange resin Amberlite IRA-904 modified with tetrakis(4-carboxyphenyl)porphyrin (TCPP) was studied in batch equilibrium experiments. The influence of operating variables such as initial pH and contact time between solution and the resin on the equilibrium parameters was measured. The selectivity order of investigated metal ions was evaluated as follows: Pb²⁺ > Ni²⁺ > Cu²⁺ > Cd²⁺. The matrix cations, such as Mg²⁺ and Ca²⁺, exhibit very low affinity for TCPP-modified resin. The rate uptake of the sorption procedure is predominantly controlled by film diffusion. The best retention kinetic was observed for lead where half the saturation of the TCPP-modified sorbent was achieved in less than 5 min. Author for correspondence. E-mail: kryspyrz@chem.uw.edu.pl Received November 20, 2002; accepted January 26, 2003 Published online May 5, 2003     

Imidazo[1,2-a]pyridine-substituted coumarin as a selective ratiometric sensor for Cu2+ ion

A novel fluorescent chemosensor, (E)-7-(diethylamino)-3-((2-phenylimidazo[1,2-a]pyridin-3-ylimino)methyl)-2H-chromen-2-one 1a, has been synthesised and characterised. This chemosensor displayed an extreme selective fluorescence emission only with Cu²⁺ ion over all other metal ions examined. The Job’s plot experiment analysis suggested the binding ratio of the chemosensor 1a with Cu²⁺ was 1:1 metal-to-ligand ratio. The association constant for Cu²⁺ towards receptor 1a obtained from Benesi–Hildebrand plot was found to be 4.859 × 10³ M^?1 with a detection limit 4.6 × 10^?8 M. Fluorescence enhancement caused by Cu²⁺ binding with chemosensor 1a attributed to combinational effect of intramolecular charge transfer and chelation-enhanced fluorescence occurred at pH 8.0.     

Synthesis and structural characterization of a yttrium coordination polymer formed by bridging of an acyclic polyether

The amide-type acyclic polyether, 1,2-ethylenedioxy-bis(N-pyridin-2-ylmethyl-benzamide) (L) was synthesized and characterized by EA, IR and ¹H NMR spectroscopy. The reaction of yttrium nitrate with L produced a rare chain structural coordination polymer {[Y(NO₃)₃L(H₂O)]?·?(H₂O)} _n (1) by use of the flexible ligand L as the building blocks. The structure of 1 was determined by X-ray crystallography and thermal analysis. In 1, L, as a bidentate bridging spacer, binds two neighboring Y atoms to form a one-dimensional chain polymer. The chain polymer was further connected into the three-dimensional network by hydrogen bonding interactions.     

Grafting of Polymers onto a Crosslinked Polymer Carrying Carboxyl Groups as a Model Compound for Carbon Black

Abstract

A cation-exchange resin (a crosslinked polymer carrying carboxyl groups) was used as a model compound for carbon black, and the grafting of several polymers to the resin was investigated. Reaction of acyl chloride groups that had been placed on the ion-exchange resin with polymers having hydroxyl or amino groups, such as polypropylene glycol, polyethylene glycol, polybutadiene glycol, polyvinyl alcohol, silicone diol, silicone diamine, and polyethyleneimine, resulted in grafting to the ion-exchange resin. In further experiments, primary amino groups were placed on the cation-exchange resin by reaction of acyl chloride groups with ethylenediamine. It was found that ring-opening polymerization of γmethyl L-glutamate N-carboxyanhydride is initiated by the amino groups on the resin, and polypeptide was grafted from the cation-exchange resin. Therefore, the reactivity of carboxyl groups on the resin was found to be similar to that on carbon black. However, carboxyl groups on the resin failed to initiate the cationic polymerization of vinyl monomers, in contrast to those on carbon black. This suggested that the acidity of carboxyl groups on carbon black is greater than on the cation-exchange resin.     

Polymers to Selectively Remove Oxidizing Anions from Non-Oxidizing Anions and NO3 − and NO2 − and NO2 − From Polluted Waters

Abstract

A copolymer of 1-phenyl-2-diethylaminoethyl-p-aminobenzoate and polyvinyl-benzyl chloride was found to have a greater capacity for NO₃ ^? and NO₂ ^? than a previously reported nitron polymer but did not react as rapidly. The resin is readily regenerated with NH₄OH or NH₄Cl and is not affected by the pH of the water over the range of 4–10.

A copolymer of 1-(4′-nitrophenyl)-2-diethyl aminoethyl-p-nitrobenzoate and polyvinylbenzyl chloride was found to react nearly as fast as the nitron polymer and have a larger capacity for NO₃ ^? and NO₂ ^?.     

A new chelating resin containing 2-aminothiophenol: Synthesis characterization and determination of mercury in waste water using <Superscript>203</Superscript>Hg radiotracer

A new stable chelating resin was synthesized by incorporating 2-aminothiophenol into Merrifield polymer through C-N covalent bond and characterized by elemental analysis, IR and thermal study. The sorption capacity of the newly formed resin for Hg²⁺ as a function of pH has been studied using ²⁰³Hg radioisotope. The resin exhibits no affinity to alkali or alkaline earth metal ions and common anions. The separation of mercury(II) in presence of different alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), common anions (ClO₄ ⁻, SO₄ ²⁻) and other diverse ions (Ag⁺, Cu²⁺, Pb²⁺, Fe³⁺, Ni²⁺ and Zn²⁺) has been checked. In column operation it has been observed that Hg²⁺ content of the waste water can be removed at usual pH of natural water. Mercury was determined by isotope dilution method and the concentration of Hg²⁺ in the waste water spiked with ²⁰³Hg was found to be 0.05 to 0.09 μg/ml.     

Thermal Decomposition of Chloromethylated Poly(styrene)-PAN Resin and Its Complexes with Some Transition Metal Ions

The complexes formed by the chemically modified chloromethylated poly(styrene)-PAN (CMPS-PAN) as a resin chelating ion exchanger were characterized by infrared and potentiometry. The thermal degradation of pure CMPS-PAN resin and its complexes with Au³⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺ and Pt⁴⁺ in air atmosphere has been studied using thermal gravimetry (TG) and derivative thermal gravimetry (DTG). The results showed that four different steps accompany the decomposition of CMPS-PAN resin and its complexes with the metal ions. These stages were affected by the presence of the investigated metal ions. The thermal degradation of CMPS-PAN resin in the presence of the ions showed different stability of the resin in the following decreasing order: Au³⁺>Pt⁴⁺>Mn²⁺>Cu²⁺>Cr³⁺>Fe³⁺. On the basis of the applicability of a non-isothermal kinetic equation, the decomposition process was a first-order reaction. The activation energy, Ea, the entropy change, ΔS ^*, the enthalpy change, ΔH ^* and the Gibbs free energy of activation, ΔG ^* were calculated by applying the theory of the reaction rates. The effect of the different central metal ions on the calculated thermodynamic activation parameters was discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

Phenol-formaldehyde resin route to the synthesis of several iron group transition metal phosphides

Abstract

A series of iron, cobalt and nickel metal phosphides of chemical formula Fe_xP, Co₂P and Ni₂P with high specific surface areas of 331.1, 294.2 and 228.0 m² g^?1, respectively, was firstly synthesized by phenol-formaldehyde resin route. It was found that the as-prepared Co₂P and Ni₂P samples synthesized using phenol-formaldehyde resin as a carbon source showed much higher BET surface areas than those prepared using other carbon sources reported before, including cinnamic strong alkali anion exchange resin, p-phenylenediamine and hexamethylenetetramine. This phenol-formaldehyde resin route was proved to be as universal as traditional H₂ reduction method.     

Synthesis and structure of a nickel coordination polymer with channels hosting polyanion chains

A porous coordination polymer, {[Ni(Dpdo)₄(H₂O)₂][H(H₂O)_6.5](PMo₁₂O₄₀)} _n (I), where Dpdo is 4,4′-ipyridine-N,N′-hoxide, templated by polyanion chains has been synthesized through the self-assembly of Ni²⁺ ions and Dpdo ligands in acetonitrile-water solutions and characterized by elemental analysis, IR spectra, and single-crystal X-ray diffraction. The structure of compound I constructed from the polyanion [PMo₁₂O₄₀]³⁻ and the coordinated cation [Ni(Dpdo)₄(H₂O)₂]²⁺ exhibits a 3D non-interwoven frameworks with large channels occupied by the poly-Keggin anion chains as guests.     

Synthesis of a tetrazine-based catecholamide derivative and its evaluation as a chelating agent for removal of Cd(II), Co(II), and Cu(II)

The synthesis and structural characterization of a tetrazine-based catecholamide (CAM) ligand, N,N′-bis(N″-(aminoethyl)-2,3-bis(hydroxy)benzamide)-1,2,4,5-tetrazine-3,6-diamine (5), were investigated. All compounds were characterized by ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and FTIR spectroscopy. The protonation equilibria of 5 and complexation capacities (log β_pqr) of Cd²⁺, Co²⁺, and Cu²⁺ complexes of 5 were evaluated through potentiometric titration and spectrophotometric titration, respectively. Species independent pM value (=?log [M]_free) was used to compare metal affinities with the final sequence Cu²⁺ > Cd²⁺ > Co²⁺. Results show that 5 has potential for heavy metal removal.     

Ester and Ketone Groups Substituted Mono- and Di- Azo-coupled Azocalix[4]arenes as Extractant for Hg+ and Hg2+, or Cr3+Cations

This article describes extraction properties of mono- (A1–A8) and di- (B1–B8) substituted azocalix[4]arene analogues. The ionophore solvent extractions of alkaline-earth (Sr²⁺), basic metal (Pb²⁺) and transition metal cations (Ag⁺, Hg⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cr³⁺) from aqueous phase to organic phase were carried out by azocalix[4]arene derivatives. It has been observed that they show a good extraction behavior toward selected heavy metal (Hg) and toxic metal (Cr), while A4 and B4 prefer Hg⁺, Hg²⁺ and Cr³⁺ among transition metal cations, respectively. The azocalix[4]arenes (A1–A8) and (B1–B8) are not efficient extractants for all of the selected metal cations, whereas A4 and B4 are selective only for Hg metal cation.     

Cation Complexation by a Lower Rim Calix(4)arene Derivative: Structural,Electrochemical and Thermodynamic Studies

The synthesis and characterization (¹H and ¹³C NMR) of a partially substituted lower rim p-tert-butylcalix(4)arene, namely, 5,11,17,23-tetra-4-tert-butyl-25,27-bis(diethylphosphate amino)ethoxy-26,28-dihydroxycalix[4]arene (1), are reported. The solution thermodynamics of the ligand in a variety of solvents at 298.15?K was investigated through solubility (hence standard Gibbs energy of solution) measurements while the calorimetric technique was used to derive the standard solution enthalpy. These data were used to calculate the standard entropy of solution. An enthalpy–entropy compensation effect is shown and, as a result, slight variations are observed in the transfer Gibbs energies of this ligand from the reference to other solvents. ¹H NMR, conductance and calorimetric measurements were carried out to establish the degree of interaction of the ligand with univalent (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and Ag⁺) and bivalent (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺, Cd²⁺, Hg²⁺, Cu²⁺, Zn²⁺) cations in acetonitrile, methanol, N,N-dimethylformamide and propylene carbonate. No complexation was found between this ligand and univalent cations in these solvents. As far as the bivalent cations are concerned, interaction between 1 and these cations was found only in acetonitrile. The versatile behaviour of this ligand with bivalent cations in this solvent is reflected by the formation of complexes of different stoichiometry. Thus the interaction of 1 with alkaline-earth (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺) and Pb²⁺ metal cations leads to the formation of 1:2 (cation:ligand) complexes. However, for other bivalent metal cations (Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺) the complex stoichiometry was found to be 1:1. The results are discussed in terms of the key role played by acetonitrile in processes involving calix[4]arene derivatives.