Products of Polyaddition of 1,1′-Isopropylidene- bis-(p-phenylene-oxy)-di-β-ethanol Thioglycolate with 4,4′-Diphenylmethane Diisocyanate and Desmodur L

Abstract

Esterification of dianol 22 by means of thioglycolic acid and some analytical tests of the product obtained were carried out. The synthesis of polyurethanes was then carried out using 4,4′-diphenylmethane diisocyanate and Desmodur L. The products of polyaddition were subject to some physicomechanical, thermal, and dielectric tests.     

Polymers from Renewable Resources. Xiv. Interpenetrating Polymer Networks Derived from Castor Oil—Isophorone Diisocyanate-Polyacrylamide: Thermal,Scanning Electron Microscopy,and Xrd Studies

Abstract

A large number of castor oil based polyurethanes were prepared using various diisocyanates such as isophorone diisocyanate varying the NCO/OH ratio. All the polyurethanes were reacted with acrylamide and methacrylamide using ethylene glycol dimethacrylate as crosslinker and benzoyl peroxide as initiator. Thermogravimetric analysis of the polymers were followed using computer analysis method for assigning the kinetic mechanism. The degradation steps have been discussed in the light of kinetic parameters. The SEM of some of the IPNs has been studied and the morphology has been examined. The samples were subjected to wide angle X-ray diffraction analysis. Ruland and Vonk method was used to calculate the degree of crystallinity (X_cr).     

Azeotropy in Terpolymerization

Abstract

A number of polyurethanes were synthesized by reacting castor oil with isophorone diisocyanate while varying the NCO/OH ratio. All these polyurethanes were reacted with such acrylic monomers as acrylamide and methacrylamide by using ethylene glycol dimethacrylate as a crosslinker and benzoyl peroxide as the initiator. The physicochemical properties of interpenetrating polymer networks (IPNs) are reported. The durability, solvent absorption, outdoor weathering, and aging properties of IPNs have been studied. Thermogravimetric analysis was used to study the thermal behavior of IPNs and the evaluation of kinetic parameters. A number of equations, such as those of Freeman-Anderson, Broido, Piloyan-Novikova, Horowitz-Mitzger, and Coats-Redfern, have been used to determine the kinetic parameters. The degradation mechanism is discussed.     

SYNTHESIS OF POLYURETHANES CONTAINING DIOXYBENZYLIDENECYANOACETATE AS AN NLO-CHROMOPHORE FOR ELECTRO-OPTIC APPLICATIONS

Methyl 2,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3) was prepared by hydrolysis of methyl 2,4-di-(2'-vinyloxyethoxy)benzylidenecyanoacetate (2). Diol 3 was condensed with 2,4-toluenediisocyanate and 3,3'-dimethoxy-4,4'-biphenylenediisocynate to yield polyurethanes 4 and 5 containing the NLO-chromophore 2,4-dioxybenzylidenecyanoacetate. The resulting polyurethanes were soluble in common organic solvents such as acetone and DMF. T _g values of the polymers obtained from DSC thermograms were in the range of 101–114°C and electro-optic coefficient (r ₃₃ ) of the poled polymer films was in the range of 12–15 pm/V at 633 nm. Polymers 4 and 5 showed a thermal stability up to 300°C in TGA thermograms, which is acceptable for NLO device applications.     

Synthesis and thermal properties of side chain-type liquid crystalline polyurethanes

Abstract

The synthesis of side chain-type polyurethanes is described. Their thermal properties were investigated by differential scanning calorimetry and polarizing microscopy and are discussed in terms of the dependence of the polymer backbone on temperature as shown by FT-infrared spectroscopy. The hydrogen bonding which arises from the rather flexible polymer backbone plays a more important role in determining the thermal stability than does the rigid polymer backbone.     

Synthesis and molecular docking studies of some new thiosemicarbazone derivatives as HCV polymeraseinhibitors

Series of new thiosemicarbazones was prepared and molecular studied as inhibitors of HCV 4WTG polymerase. Thus, the thiosemicarbazone derivatives (3a–k) were synthesized by two different ways, from reacting thiosemicarbazides with aldehydes and by one-pot three component reaction using ZnCl₂/SiO₂ as a catalyst under solvent free conditions. Molecular docking analysis of the synthesized products predicted that the thiosemicarbazone derivatives 3c, 3g, and 3k were the most promised as a highly inhibitors for HCV 4WTG polymerase in comparison with Sofosbuvir drug.     

Influence of Swelling and Disruption of the Starch Granule on the Composition of the Starch-Polyacrylonitrile Copolymer

Abstract

The results of an evaluation of polymers as cryogenic adhesives are presented. It was observed that polyether-based polyurethanes provided the most attractive capability as adhesives for use at liquid hydrogen temperatures.     

Thermal properties of polyurethanes synthesized using waste polyurethane foam glycolysates

In this work thermal transitions and thermal stability of polyurethane intermediates and polyurethanes were investigated. The intermediates were obtained by glycolysis of waste polyurethane (PUR) in the reaction with hexamethylene glycol (HDO). The excess of HDO was not separated from the product after the glycolysis process was finished. The effects of different mass ratio of HDO to PUR foam on selected physicochemical properties (hydroxyl number, Brookfield viscosity and density) were also determined. The polyurethanes were synthesized from the obtained intermediates by the prepolymer method using diisocyanate (MDI) and glycolysis product of molecular mass in range 700/1000 g mol^–1. Hexamethylene glycol, 1,4-butanediol and ethylene glycol were used as chain extender agents. Influence of NCO groups concentration in prepolymer on glass transition temperature (T _g) and storage and loss modulus (E’, E’’) of polyurethanes were investigated by the DMTA method. Thermal decomposition of obtained glycolysates and polyurethanes was followed by thermogravimetry coupled with Fourier transform infrared spectroscopy. Main products of thermal decomposition were identified.     

Syntheses of polycarbonate and polyurethane precursors utilizing CO2 over highly efficient, solid as-synthesized MCM-41 catalyst

As-synthesized MCM-41 was used as a reusable, heterogeneous catalyst for the eco-friendly synthesis of cyclic carbonate precursors of polycarbonates via a cycloaddition reaction of CO₂ with epoxides. This catalyst is also efficient for the synthesis of alkyl and aryl carbamate precursors of polyurethanes via the reaction of amines, CO₂ and alkyl halides. Both these reactions were carried out under mild conditions and without using any solvent or co-catalyst. CO₂ is utilized as a raw material replacement for toxic phosgene in the conventional synthesis of these chemicals.     

New Chiral Polyurethane Polymers Based on Functionalized Cyclotriphosphazenes

Abstract

Novel hybrid polymers using chiral phosphaznes were prepared in the following way: Starting from hexachlorocyclofriphosphazene, N₃,P₃,Cl₆, chelating phenolates were introduced by reaction with the corresponding sodium salt. Thus, reaction with two equivalents of atropisomeric binaphtolate yields chiral lb in high yield. Subsequently, p-methoxyphenolates were reacted with the remaining PCl₂, functionality and the p-MeO groups were converted to hydroxy groups [I] to give bifunctional 2a,b. Finally, polyadditions to diisocyanates lead to new cyclolinear polyurethanes 3a,b which were characterized by thermal analysis [2,3]. The T₁₀, is 320 and 240°C for 3a and 3b respectively. In particular, the chifal polymer 3b [α=lll°] may have interesting properties as catalyst support.     

GAS PERMEATION OF SEGMENTED POLYURETHANES AND THEIR BLENDS WITH PVC

Film specimens of four segmented polyurethanes with different soft segments, namely polycaprolactone, polytetramethylene adipate, polytetramethylene oxide and polypropylene oxide, and their blends with PVC of different compositions were obtained by solution cast. The permeability of these films to O_2, N_2 and H_2 and their density were measured by using gas chromatography and technique of density gradient column. The polyether polyurethanes were found to have higher permeability than the polyester ones due to their low glass transition temperature and /or the low density value. The blends of PVC and polyether polyurethanes, especially the PPO-based polyurethane, are incompatible, and their permeability coefficient-composition dependence has the typical S-shaped curves. PVC is well compatible with the soft segments in its blends with polyester polyurethanes. For these blends the composition dependence of permeability is characterized by a negative deviation from the semilogarithmic additivity rule, and it is possible to prepare blends having T_g 20℃lower than that of PVC, but retaining its low permeability almost unchanged, results were discussed in according with the different approaches for the permeation behavior of compatible and incompatible blends.     

Synthesis and properties of novel segmented polyurethanes containing alkyl phosphatidylcholine side groups

In this article, we report the synthesis and properties of novel segmented polyurethanes containing alkyl phosphatidylcholine side groups. Alkyl phosphatidylcholine groups were attached to the hard blocks of the polyurethanes. A novel diol, 9-(2-hydroxy-1-hydroxymethyl-1-methyl-ethylcarbamoyl)-nonyl-phosphatidylcholine (HDEAPC), was synthesized and characterized by FTIR, ¹H-NMR and mass spectroscopy. Two types of polyurethanes, poly(ether urethane)s and poly(carbonate urethane)s, containing alkyl phosphatidylcholine side groups were synthesized using methylenebis(phenylene isocyanate) (MDI), polytetramethyleneoxide (PTMO), poly(1,6-hexyl-1,5-pentylcarbonate) diol (PHPCD), 1,4-butanediol (BDO) and HDEAPC. The obtained phosphatidylcholine polyurethanes had relatively high molecular weights and good mechanical strength, as characterized by GPC and Instron. XPS and contact angle studies revealed that there was enrichment of alkyl phosphatidylcholine side groups near the surface of the polyurethanes. Biocompatibility was evaluated by protein adsorption using conventional polyurethanes as references. The surface of phosphatidylcholine poly(carbonate urethane)s effectively suppressed protein adsorption.     

Synthesis and properties of liquid crystalline polyurethanes

Liquid crystalline polyurethanes were prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI). The effect of partial replacement of BHBP by 25–75 mol % poly(oxytetramethylene) diol (PTMO, M _n = 250) on the liquid crystalline properties was studied. The BHBP/TDI/PTMO polyurethanes were obtained by one- and two-step polyaddition. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polymers was investigated by the SALS method. Thermogravimetric investigations of the polyurethanes were also performed. All polyurethanes containing BHBP units have liquid crystalline properties. Partial replacement of BHBP by PTMO-250 considerably changes the phase transition temperatures and the range of mesophase occurrence. More homogeneous polyurethanes were obtained, if the two-step polyaddition method was applied. The polyaddition method affects the phase transition temperatures. © 1993 John Wiley & Sons, Inc.     

Synthesis,structural characterization and catalytic potential of oxidovanadium(IV) and dioxidovanadium(V) complexes with thiazole-derived NNN-donor ligand

Reaction between the tridentate NNN donor ligand, (E)-2-(2-(1-(pyridin-2-yl)ethylidene)hydrazinyl)benzo[d]thiazole (HL), and V₂O₅ in ethanol gave a new vanadium(V) complex, [VO₂L] (1), while the similar reaction by using [V^IVO(acac)₂] as the metal source gave two different types of crystals related to compounds [VO₂L] (1) and [V^IVO(acac)L] (2). The molecular structures of the complexes were determined by single-crystal X-ray diffraction and spectroscopic characterization was carried out by means of FT-IR, UV–vis and NMR experiments as well as elemental analysis. The oxidovanadium(IV) and dioxidovanadium(V) species were used as catalyst precursors for olefin oxidation in the presence of hydrogen peroxide (H₂O₂) as an oxidant. Under similar experimental conditions, the presence of 1 resulted in higher oxidation conversion than 2.     

Solvent‐free and nonisocyanate melt transurethane reaction for aliphatic polyurethanes and mechanistic aspects

A novel melt transurethane polycondensation route for polyurethanes under solvent‐free and nonisocyanate condition was developed for soluble and thermally stable aliphatic or aromatic polyurethanes. The new transurethane process was investigated for A + B, A‐A + B, and A‐A + B‐B (A‐urethane and B‐hydroxyl) ‐type condensation reactions, and also monomers bearing primary and secondary urethane or hydroxyl functionalities. The transurethane process was confirmed by ¹H and ¹³C NMR, and molecular weight of the polymers were obtained as M_n = 10–15 × 10³ and M_w = 15–45 × 10³ g/mol. The mechanistic aspects of the melt transurethane process and role of the catalyst were investigated using model reactions, ¹H NMR, and MALDI‐TOF‐MS. The model reactions indicated the occurrence of 97% reaction in the presence of catalyst, whereas its absence gave only less than 2% of the product. The polymer samples were subjected for end‐group analysis using MALDI‐TOF‐MS, which confirms the Ti‐catalyst mediated nonisocyanate pathway in the melt transurethane process. Almost all the polyurethanes were stable up to 280 °C, and the T_g of the polyurethanes can be easily fine‐tuned from ?30 to 120 °C by using appropriate diols in the melt transurethane process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2445–2458, 2008     

Oxidative and enzymatic degradations of l-tyrosine based polyurethanes

Oxidative and enzymatic degradations of l-tyrosine based polyurethanes were studied for biomaterial applications. Oxidative degradation was performed with 0.1 M cobalt chloride (CoCl₂) in hydrogen peroxide solutions at 37 °C and the degradation was assessed by ATR-FTIR. Results indicate that polyurethane with polyethylene glycol (PEG) shows soft segment degradation while polyurethane based on polycaprolactone (PCL) shows hard segment degradation. Enzymatic degradation of the polyurethanes was studied using proteolytic enzyme α-chymotrypsin in phosphate buffer solution (pH 7.4) at 37 °C. The enhanced degradability of l-tyrosine based polyurethanes is due to both the presence of amino acid based chain extender and the action of enzyme. The changes in the morphology of polyurethanes were analyzed by SEM. The results of the degradation study were correlated to the structure of the polyurethanes.     

Iron(III), nickel(II) and zinc(II) complexes based on acetophenone-S-methyl-thiosemicarbazone: synthesis,characterization, thermogravimetry,and a structural study

New complexes, [Fe(L)Cl], [Ni(L)], and [Zn(L)C₂H₅OH] (1–3), were synthesized by template reaction of 2-hydroxy-acetophenone-S-methyl-thiosemicarbazone with 2-hydroxy-benzaldehyde. The compounds were characterized by elemental analysis, magnetic measurements, FT-IR, ¹H NMR, UV–visible, and ESI–MS spectra. In these complexes, the ligand is coordinated to the metal ion as dinegatively charged tetradentate chelating agents via the N₂O₂ donor set. The iron(III) and zinc(II) complexes exhibit square pyramidal geometry whereas the nickel(II) complex has a square planar geometry. The crystal structure of 1, determined by X-ray diffraction method, indicates that 1 crystallizes in the monoclinic space group P21/c with Z = 4. Thermal decompositions of the compounds have been investigated using TGA in air.     

Rationalizing chain microstructure in the polyα-olefins synthesized by cationic AlCl3/H2O catalytic system

In this study, three middle range α-olefin monomers including 1-hexene, 1-octene, and 1-decene were oligomerized using conventional AlCl₃/H₂O catalytic system. Molecular weight and microstructure of the oligomers were analyzed by GPC and ¹HNMR, respectively. By ¹HNMR spectra, both internal (CHR=CHR′ and CHR=CR′R′′) and external (CH₂=CR′R′′) olefins containing di and tri-substituted C=C bonds were detected. After successful oligomerization, synthesized polyα-olefins underwent hydrogenation process using Pd(0)-Hal catalyst to yield synthetic oils of PHex, POct, and PDec, respectively and then completion of the hydrogenation was confirmed by ¹HNMR spectroscopy. The microstructure of the synthesized oligomers was rationalized using the ratio under the peak of CH?+?CH₂/CH₃ hydrogens (S1/S2) in ¹HNMR spectra and the degree of oligomerization obtained from M_n. According to the results, the best match between theoretical and real S1/S2 is obtained when considering double bond isomerization in the synthesized PAOs. By knowing PAO molecular weight, a relationship between monomer type and S1/S2 in the PAO homopolymers was detected. Our suggested methodology can be generalized to the unknown PAO homopolymers to unravel their monomer type by simple ¹HNMR and GPC analyses.     

The influence of chemical structure on thermal properties and surface morphology of polyurethane materials

The surface morphology and thermal properties of polyurethanes can be correlated to their chemical composition. The hydrophilicity, surface morphology, and thermal properties of polyurethanes (differed in soft segments and in linear/cross-linked structure) were investigated. The influence of poly([R,S]-3-hydroxybutyrate) presence in soft segments and blending of polyurethane with polylactide on surface topography were also estimated. The linear polyurethanes (partially crystalline) had the granular surface, whereas the surface of cross-linked polyurethanes (almost amorphous) was smooth. Round aggregates of polylactide un-uniformly distributed in matrix of polyurethane were clearly visible. It was concluded that some modification of soft segment (by mixing of poly([R,S]-3-hydroxybutyrate) with different polydiols and polytriol) and blending of polyurethanes with small amount of polylactide influence on crystallinity and surface topography of obtained polyurethanes.     

Preparation and Optical Limiting Properties of Polyurethane Containing Long Conjugated Chromophores

Two functional polyurethanes (P1 and P2) bearing a large π electron conjugated chromophoric pendant were synthesized and characterized by FT‐IR, ¹H‐NMR and UV‐Vis absorption spectra. Their optical limiting properties were evaluated. The results show that P1 and P2 show novel optical limiting properties, which are assigned to a long π electron conjugated chromophoric pendant. It was found that their optical limiting properties were affected simultaneously by solution concentration and P2 displays a better optical limiting property than P1 at the same solution transmittance, although that P1 has larger χ⁽³⁾ (4.28×10^?11 esu) than P2 (0.87×10^?11 esu), and their optical limiting mechanism is investigated.