Copolymerization and Copolymers of 2,4,5-Tribromostyrene with Styrene and Acrylonitrile

Abstract

2,4,5-Tribromostyrene (TBSt) was copolymerized with styrene (St) or acrylonitrile (AN) in toluene solution using 2,2′-azobisisobutyronitrile as free radical initiator. The copolymerization reactivity ratios were found to be for the system TBSt/St r ₁ = 1.035 ± 0.164 (TBSt) and r ₂ = 0.150 ± 0.057 (St), and for the system TBSt/AN r ₁ = 2.445 ± 0.270 (TBSt) and r ₂ = 0.133 ± 0.054 (AN). The e and Q values were also calculated. The initial copolymerization rate, R _p, for both systems linearly increases as the content of TBSt in the monomer mixture increases. However, these values are somewhat higher when AN was used as a comonomer. A similar behavior has also been established for the course of the copolymerization reactions to high conversion. The resulting copolymers and TBSt-homopolymer show similar thermal stabilities of polystyrene. However, the glass transition temperature increases markedly with increasing TBSt content.     

Thermal stability of poly(vinyl bromide) and copolymers of vinyl bromide with methyl vinyl ketone

Thermal stability and degradation behaviour have been studied for PVB and VB-MVK copolymers spanning the whole composition range, using thermogravimetric analysis. The reactivity ratios in the radial copolymerization were determined by using an NMR technique, leading to r_i(VB) = 3.6 ± 0.2 and r₂(MVK) = 0.2 ± 0.1. The introduction of MVK units into the VB chain leads to an interaction with release of methyl bromide. The stability of the copolymers increases with increasing MVK concentration.     

Copolymers from Castor Oil Prepolymers (COP). 4. Copolymerization of Methyl Methacrylate with COP

The copolymerization of castor oil prepolymer (COP) with methyl methacrylate (MMA) has been accomplished at 75°C using a free radical initiator. The monomer reactivity ratios of MMA (r₁) and COP (r₂) were determined to be r₁ = 3.04 and r₂ = 0.605. With an increasing concentration of COP in the binary mixture, copolymers with decreasing molecular weight were obtained. The copolymers obtained were powdery substances soluble in many organic solvents.     

Copolymerization of 4‐Propanoylphenyl Acrylate with Methyl Methacrylate: Synthesis,Characterization and Reactivity Ratios

The new acrylic monomer 4‐propanoylphenyl acrylate (PPA) was synthesized and copolymerized with methyl methacrylate (MMA) in methyl ethyl ketone at 70±1°C using benzoyl peroxide as a free radical initiator. The copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The compositions of the copolymers were determined by ¹H‐NMR analysis. The reactivity ratios of the monomers were determined using Fineman‐Ross (r₁=0.5535 and r₂=1.5428), Kelen‐Tüdös (r₁=0.5307 and r₂=1.4482), and Ext. Kelen‐Tüdös (r₁=0.5044 and r₂=1.4614), as well as by a nonlinear error‐in‐variables model (EVM) method using a computer program, RREVM (r₁=0.5314 and r₂=1.4530). The solubility of the polymers was tested in various polar and non‐polar solvents. The elemental analysis was determined by a Perkin‐Elmer C‐H analyzer. The molecular weights (M_w and M_n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of MMA in the copolymers. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of MMA in the copolymers.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Copolymerization of n‐butylacrylate with methylmethacrylate by a novel photoinitiator, 1‐(bromoacetyl)pyrene

The photopolymerization efficiency of pyrene (Py), 1‐acetylpyrene (AP), and 1‐(bromoacetyl)pyrene (BP) for copolymerization of n‐butylacrylate (BA) with methylmethacrylate (MMA) was compared. A kinetic study of solution copolymerization in DMSO at 30 ± 0.2°C showed that the Py could not initiate copolymerization even after 20 h, whereas with AP as initiator, less than 1% conversion was observed. However, introduction of a Br in α‐methyl group of AP significantly enhanced the percent conversion. The kinetics and mechanism of copolymerization of BA with MMA using BP as photoinitiator have been studied in detail. The system follows nonideal kinetics (R_p α [BP]^0.67[BA]¹[MMA]^0.98), and degradative solvent transfer reasonably explains these kinetic nonidealities. The monomer reactivity ratios (MRRs) of MMA and BA have been estimated by the Finemann–Ross and Kelen–Tudos methods, by analyzing copolymer compositions determined by ¹H‐NMR spectra. The values of r₁ (MMA) and r₂ (BA) were found to be 2.17 and 0.44, respectively, which suggested the high concentration of alternating sequences in the random copolymers obtained. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 261–267, 2007     

Alternating Copolymers of Limonene with Methyl Methacrylate: Kinetics and Mechanism

The radical copolymerization of limonene (optically active) with methyl methacrylate in xylene at 80±0.1°C for 1 hr, initiated by benzoyl peroxide (BPO) yield alternating copolymer(s), under the inert atmosphere of nitrogen, as evidenced by reactivity ratios r₁ (MMA)=0.07 and r₂ (limonene)=0.012 using the Kelen–Tüdos method. The kinetic expression is Rα[I]^0.5[MMA]^1.0[Lim.]^?1.0. The decrease in the rate of polymerization with increase in concentration of limonene is due to penultimate unit effect. The overall energy of activation is calculated as 49 kJ/mole. FTIR of the copolymer(s) shows the characteristic frequencies at 1732.40 and 2951.40 cm^?1 due to –OCH₃ of MMA and aromatic C–H stretching of limonene, respectively. ¹H NMR spectra shows peak at 3.8–4.1 δ and 5.3–5.6 δ due to –OCH₃ of MMA and trisubstituted olefinic protons [–CH=CH–CH₂–] of limonene, respectively.     

Thermal stability of poly(acryloyl chloride) homopolymer and copolymers of acryloyl chloride with methyl methacrylate

The thermal stabilities of poly(acryloyl chloride) homopolymer and copolymers of acryloyl chloride with methyl methacrylate covering the entire composition range were studied by thermogravimetric analysis. At each extreme of the composition range incorporation of comonomer units results in a copolymer which is less stable than the PMMA homopolymer. The activation energies of the decomposition of the copolymers were calculated using the Arrhenius equation and found to decrease from 32.2 to 12.5 kJ mol^?1 as acryloyl chloride concentration of the copolymer increases, indicating that the copolymers of higher acryloyl chloride concentration should easier decompose than other copolymers. The reactivity ratios of the copolymer were calculated and found to ber ₁(AC)=0.2±0.02 andr ₂(MMA)=0.9±0.1.     

FURTHER STUDY OF ALLYL ETHERS AND RELATED COMPOUNDS AS TRANSFER AGENTS IN RADICAL POLYMERIZATIONS

Allyl glycidyl ether (AGE), allyl 1,1,2,3,3,3-hexafluoropropyl ether (AFE), allyl 2-naphthyl ether (ANE), 2-vinyl-1,3-dioxolane (2VD) and allyl alcohol (AA) have been examined as transfer agents in the radical polymerization of methyl methacrylate (MMA) at 60°C; the transfer constants are 1.1 × 10^?3, 0.1 × 10^?3, 0.2 × 10^?3, 1.1 × 10^?3 and 0.6 × 10^?3, respectively. AFE and AA barely affect the rate of polymerization: AGE, ANE, and 2VD act as weak retarders. There is no direct correlation between effectiveness as a transfer agent and the extent of retardation for these additives. For copolymerization with MMA (monomer-1), the monomer reactivity ratios r₁ are 42 ± 5 and 32 ± 5 for AGE and ANE, respectively; for both cases, r₂ is very close to zero; 2VD engages in copolymerization with MMA to a negligible extent. Experiments involving styrene or acrylonitrile gave results consistent with those obtained using MMA.     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

Styrene/Methyl Methacrylate-Vinyltns-(methoxyethoxy)silane Copolymers: Synthesis,Characterization, and Thermal Degradation

Vinyltris(methoxyethoxy)silane (VTMES)was copolymerized with methyl methacrylate (MMA) and styrene (St) in bulk at 60°C using benzoyl peroxide as free radical initiator. The copolymer compositions were determined from elemental analysis, and reactivity ratios were calculated by the Kelen-Tüds graphical method. For MMA-VTMES, r₁ = 11.2 ± 0.88 and r₂ = 0 ± 0.16, and for St-VTMES, r₁ = 11.2 ± 2.0 and r₂ = 0 ± 0.34. In both systems r₂ is near zero, indicating that VTMES undergoes little or no polymerization under the experimental conditions. The influence of the silicon comonomer on some of the basic properties of the copolymers (e.g., intrinsic viscosity, solubility, and thermal behavior) was studied.     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003     

Copolymers of 4‐(3′,4′‐Dimethoxycinnamoyl)phenyl Acrylate and MMA: Synthesis,Characterization, Photocrosslinking Properties,and Monomer Reactivity Ratios

Abstract

4‐(3′,4′‐Dimethoxycinnamoyl)phenyl acrylate (DMCPA) containing pendant chalcone moiety was copolymerized with methyl methacrylate (MMA) by radical polymerization in ethyl methyl ketone at 70°C under a nitrogen atmosphere using benzoyl peroxide (BPO) as a free radical initiator. The prepared polymer was characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The composition of the copolymer was determined using ¹H‐NMR analysis. The monomer reactivity ratios of copolymerization were determined using conventional linearization methods such as Fineman–Ross (r ₁ = 0.26 and r ₂ = 0.61), Kelen–Tudos (r ₁ = 0.26 and r ₂ = 0.61), and Ext. Kelen–Tudos (r ₁ = 0.23 and r ₂ = 0.59), and a non‐linear error‐in‐variables model (EVM) method using the computer program RREVM (r ₁ = 0.2541 and r ₂ = 0.6094). The molecular weights (M _w and M _n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers in air reveals that the stability of the copolymers decreases with an increase in the mole fraction of MMA in the copolymers. The solubility of the polymers was tested in various polar and non‐polar solvents. The glass transition temperature of the copolymers was determined as a function of copolymer composition. The copolymers were sensitive to UV light and became crosslinked after irradiation with 254 nm light.     

Improving the Structural Control of Graft Copolymers. Copolymerization of Poly(dimethylsiloxane) Macromonomer with Methyl Methacrylate Using RAFT Polymerization

Reversible addition‐fragmentation chain transfer was applied to the copolymerization of methyl methacrylate and a methacrylate‐terminated poly‐(dimethylsiloxane) macromonomer (PDMS‐MA). The relative reactivity of PDMS‐MA (1/r_MMA) was higher than in the conventional radical copolymerization and similar to that in the atom transfer radical copolymerization. The obtained graft copolymers had much lower polydispersities than those obtained in the conventional radical systems.     

Photodegradation in solution of copolymers of methyl vinyl ketone and methyl isopropenyl ketone with methyl methacrylate

Copolymers of methyl vinyl ketone (MVK) and methyl isopropenyl ketone (MIK) with methyl methacrylate (MMA), have been prepared covering the whole composition range. Reactivity ratios have been estimated as follows: MMA/MVK, r_MMA = 0·63 ± 0·2, r_MVK = 0·53 ± 0·2; MMA/MIK, r_MMA = 0·98 ± 0·2, r_MIK = 0·69 ± 0·2. Number average molecular weights have been measured during the course of photodegradation under 253·7 nm radiation in methyl acetate solution and rates of chain scission calculated. In each system the copolymers are less stable than the corresponding homopolymers, the rate passing through a maximum at 20–30% ketone content. These results have been discussed from a mechanistic point of view.     

Polymerization behavior of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate

Copolymers of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate (CB) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–CB copolymers made from feed ranging from 0.45–0.94 mole fractions S and MMA-CB copolymers made from feed of 0.34–0.88 mole fractions MMA were used to determine the monomer reactivity ratios r₁ and r₂. The structure of S–CB copolymers was inferred to be mainly of a random nature and in the MMA–CB copolymerization system there is a stronger tendency to form alternating copolymers. © 1993 John Wiley & Sons, Inc.     

Preparation,polymerization and copolymerization of some unsaturated dibutyltin carboxylates

Dibutylchlorotin acrylate (DBCTA), dibutylchlorotin methyl maleate (DBCTM) and dibutylchlorotin cinnamate (DBCTC) were prepared by metathesis reactions between equimolar proportions of dibutyltin dichloride and the corresponding dibutyltin dicarboxylate. The acrylate (DBCTA) was the only monomer to undergo free-radical homopolymerization and gave an insoluble cross-linked polymer of poly(dibutyltin diacrylate) with the expulsion of dibutyltin dichloride. Free-radical copolymerization with methyl acrylate (MA) gave copolymers with DBCTA and DBCTC. The reactivity ratios were respectively: MA, r₁ = 0.81 ± 0.05; DBCTA, r₂ = 0.08 ± 0.04 and MA, r₁ = 2.0 ± 0.35 DBCTC, r₂ = 0 ± 0.2. DBCTM did not copolymerize with methyl acrylate.Attempts at free-radical copolymerizations with vinyl chloride (VC) were only partially successful due to severe inhibition. DBCTM and DBCTC formed very low molecular weight copolymers containing approximately equal amounts of the comonomers. DBCTA copolymer with VC formed a copoly(dibutyltin diacrylate) network structure. However, solubility in acetic acid-d₄ due to an exchange equilibrium allowed an estimate of the reactivity ratio $\text{r}{}_{\mathrm{vc}}\text{≌ 0.17}$ to be obtained by NMR analysis.Three new tetrabutyl-1,3-di(carboxy) distannoxanes ([Bu₂SnOCOR]₂O) (R = CHCH₂; C(CH₃)CH₂ and CHCHC₆H₅) were prepared.     

Thermal stability of poly(vinyl bromide) and vinyl bromide-methyl acrylate copolymers. I

The thermal stability of PVB and five VB-MA copolymers with different compositions was studied by thermogravimetric analysis in dynamic nitrogen. The reactivity ratios of the copolymers were determined by using NMR techniques. It was found that r₁(VB) = 0.5 ± 0.1 and r₂(MA) = 7.3 ± 0.3. The stability of VB increases as the MA concentration in the copolymer compositions increases. Apparently, the formation of lactone and anhydride structures has a stabilizing effect. The stability imparted to the degrading copolymers by lactone and anhydride structures is insufficient to produce stability comparable to that of PMA itself.     

Reactivity ratios and sequence structures of the copolymers prepared using photo‐induced copolymerization of MMA with MTMP

4‐Methacryloyl‐2,2,6,6‐tetramethyl‐piperidine (MTMP) was applied as reactive hindered amine piperidine. Photo‐induced copolymerization of methyl methacrylate (MMA, M₁) with MTMP (M₂) was carried out in benzene solution at ambient temperature. The reactivity ratios for these monomers were measured by running a series of reactions at various feed ratios of initial monomers, and the monomer incorporation into copolymer was determined using ¹H NMR. Reactivity ratios of the MMA/MTMP system were measured to be r₁ = 0.37 and r₂ = 1.14 from extended Kelen‐Tüdos method. The results show that monomer MTMP prefers homopolymerization to copolymerization in the system, whereas monomer MMA prefers copolymerization to homopolymerization. Sequence structures of the MMA/MTMP copolymers were characterized using ¹H NMR. The results show that the sequence structure for the main chain of the MMA/MTMP copolymers is mainly composed of a syndiotactic configuration, only with a little heterotactic configuration. Three kinds of the sequences of rr, rr′, and lr′ in the syndiotactic configuration are found. The sequence‐length distribution in the MMA/MTMP copolymers is also obtained. For f₁ = 0.2, the monomer unit of MMA is mostly separated by MTMP units, and for f₁ = 0.6, the alternating tendency prevails and a large number of mono‐sequences are formed; further up to f₁ = 0.8, the monomer unit of MTMP with the sequence of one unit is interspersed among the chain of MMA. Copyright © 2012 John Wiley & Sons, Ltd.     

含卤高聚物记录材料的研究——不同共聚单体对紫外光敏性的影响

研究了与偏二溴乙烯(VDBr,M_1)共聚的不同单体(M_2)——丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)和苯乙烯(St)的性质和共聚物的序列分布对记录材料紫外光敏性的影响。结果表明,含St的紫外光敏性最高,含MA的较差。对同一类共聚物记录材料而言,光敏性与共聚物的序列分布,主要是P_2(M_1M_2)有对应关系。本文还报道了VDBr与MA、MMA及St在55±0.2℃以偶氮二异丁腈为引发剂的自由基共聚反应竞聚率(r)分别为,VDBr-MA:r_1=0.72±0.05,r_1=0.72±0.05;VDBr-MMA:r_1=0.50±0.04,r_2=1.74±0.04;VDBr-St:r_1=0.40±0.04,r_2=1.12±0.04。