Preparation of Albumin Microspheres Grafted Galactose Residues Through Polyethylene-Glycol Spacers,Release Behavior of 5-Fluorouracil from Them,and Their Lectin-Mediated Aggregation

Small-sized albumin gel microspheres, MSs, containing 5-fluorouracil (5FU) with targeting moieties on their surfaces (average diameter: 1.5 μm) were prepared by the glutaraldehyde crosslinking method and suspension technique. Since galactose is known to interact specifically with the asialoglycoprotein receptor on hepato-cyte, the galactose residues were introduced on the surface of MSs as the targeting moieties for hepatoma through polyethylene glycol (PEG) spacers. PEG spacers were employed to depress the immu-nogenicity of albumin, to keep the mobility of the galactose residues, and to heighten the distributive stability of the MSs in aqueous solution. It was confirmed by ESC A analysis that the PEG chains were introduced onto the surfaces of MSs. The amount of galactose residues introduced to MS were estimated to be 0.013 wt%. The intra-MSs aggregation was observed by the addition of Ricinus Communis Agglutinin I (RCA120) into the MS suspension, and then the aggregation of MSs was dissociated by addition of free lactose. Moreover, by incubation of the MSs with human hepatoma HLE cells, the phenomena of MS's specific binding onto HLE cell surfaces and phagocytosis of MSs by HLE cells were observed. These results suggested that the galactose residues on the surface of MSs were recognized with the galactose receptors on hepatoma cell surfaces. The release rate of 5FU from MSs was investigated in vitro in physiological saline at 37OC. About 90% of encapsulated 5FU were found to be released from MSs through incubation for 8 h.     

Polyelectrolyte complexes from polysaccharides: formation and stoichiometry monitoring

Colloids were obtained from non-stoichiometric polyelectrolyte complexes with two polysaccharides of opposite charge: chitosan and dextran sulfate (DS) as the polycation and polyanion, respectively. The complexes were elaborated by a one-shot addition of the polymer in default to the one in excess. The colloids were positively or negatively charged according to the nature of the polymer in excess. Dynamic light scattering (DLS) demonstrated that particles were formed at a very early stage in the complexation process. The consumption of the excess polyelectrolyte was monitored with a dye assay specific for dextran sulfate (toluidine blue) or chitosan (orange II). From these experiments, two different mechanisms of colloidal PEC formation were evidenced, according to the nature of the polymer in excess. On adding chitosan to DS in excess, regular consumption of the polyanion was observed at a constant stoichiometry, in the 1.5 to 1.85 range (sulfate residues for one glucosamine group), according to the molar mass of the polycation. When DS was added to chitosan in excess, the overall stoichiometry varied from ca. 6 (glucosamine residues for one sulfate group) down to 1 as the charge molar mixing ratio R=n+/n- decreased from 20 to 1. The existence of various mechanisms, according to the nature of the polymer in excess, could be attributed to the differences in chemical reactivity (strong vs low) of the ion in excess and the conformation and flexibility of the macromolecular chains related to their electrostatic potential.     

5-Fluorouracil derivatives with serum protein binding potencies

To develop an optimal delivery system for 5-fluorouracil (5FU) using serum protein as a drug carrier, a series of its benzyl derivatives was synthesized. Then their binding to the serum protein was investigated by equilibrium dialysis. The benzyl derivatives of 5FU were strongly bound to rat plasma protein or human serum albumin. The bound percentage increased with increasing hydrophobicity. It was suggested that the benzyl derivative of 5FU existed in the blood as a complex with serum albumin and circulated for a long time as a polymeric drug does.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

Synthesis of 5-Methyluridine and Its 5′-Mercapto-, 2-Amino-, and 4′,5′-Unsaturated Analogues

The stereospecific cis-hydroxylation of 1-(2,3-dideoxy-β-D -glyceropent-2-enofuranosyl)thymine (1) into 1-β-D -ribofuranosylthymine (2) by osmium tetroxide is described. Treatment of 2′,3′-O, O-isopropylidene-5-methyl-2,5′-anhydrouridine (8) with hydrogen sulfide or methanolic ammonia afforded 5′-deoxy-2′,3′-O, O-isopropylidene-5′-mercapto-5-methyluridine (9) and 2′,3′-O, O-isopropylidene-5-methyl-isocytidine (10) , respectively. The action of ethanolic potassium hydroxide on 5′-deoxy-5′-iodo-2′,3′-O, O-isopropylidene-5-methyluridine (7) gave rise to the corresponding 1-(5-deoxy-β-D -erythropent-4-enofuranosyl)5-methyluracil (13) and 2-O-ethyl-5-methyluridine (14) . The hydrogenation of 2 and its 2′,3′-O, O-isopropylidene derivative 4 over 5% Rh/Al₂O₃ as catalyst generated diastereoisomers of the corresponding 5-methyl-5,6-dihydrouridine ( 17 and 18 ).     

Acetate-methyl signals in the nuclear magnetic resonance spectra of peracetylated derivatives of some oligo- and polysaccharides

Peracetyl derivatives of oligo- and polysaccharides showed their own characteristic acetate-methyl signals in the NMR spectra measured in chloroform-d, which are useful for the identification and conformational analysis of oligo- and polysaccharides in solutions. An acetate-methyl signal in the lowest field among three acetate-methyl signals appeared in the NMR spectra of amylose acetate and was assigned to the acetate-methyl signal at C₆ on the basis of acetate-methyl signals of peracetylated derivatives of 6-O-tosylamylose and xylan. Monosaccharide moieties in oligo- and polysaccharides examined were found in the C1 (D ) conformation.     

Synthesis of Certain 5-Substituted 2′-Deoxytubercidin Derivatives

The synthesis of the 7-deaza-2′-deoxy-adenine derivatives 7b–3 with chloro, bromo, or methyl substituents at C(5) is described. Glycosylation of the 5-substituted 4-chloropyrrolo[2,3-d]pyrimidines 4b–d with 2-deoxy-3,5-di-O-(4-toluoyl)-α-D -erythro-pentofuranosyl chloride ( 3 ) gave the β-D -nucleosides 5b–d , exclusively. They were deblocked (→ 6b–d ) and converted into the tubercidin derivatives 7b–d .     

Stereochemie der Enzymatischen Hydrolyse von Saccharose und Raffinose Durch Invertase

Abstract

Reaction of 2-O-unprotected 1-O-silyl-protected D-glucose and D-galactose derivatives 5a-d with benzyl bromide in the presence of sodium hydride as the base afforded 1-O-benzyl 2-O-silyl derivatives 6aα/β - 6dα/β. Thus, prior to anomeric O-benzylation, trans-1,2-silyl group migration takes place. Ensuing removal of the 2-O-silyl group furnishes 2-O-unprotected compounds 8aα/β - 8dα/β, which are useful building blocks. More prone to 1-O-silyl group migration is mannose as shown for derivatives of 4,6-O-benzylidene-D-mannose 9. Cis-1,2- and cis-2,3-silyl group migrations affording compounds 15 and 13 were already observed on deacetylation of the thexyldimethylsilyl 2,3-di-O-acetyl derivative 12β under Zemplén conditions.     

Synthesis of (5R)- and (5S)-5-Methyl-5, 6-dihydrouridine Derivatives

The hydrogenation of 2′, 3′-O-isopropylidene-5-methyluridine (1) in water over 5% Rh/Al₂O₃ gave (5 R)- and (5 S)-5-methyl-5, 6-dihydrouridine (2) , separated as 5′-O-(p-tolylsulfonyl)- (3) and 5′-O-benzoyl- (5) derivatives by preparative TLC. on silica gel and ether/hexane developments. The diastereoisomeric differentiation at the C(5) chiral centre depends upon the reaction media and the nature of the protecting group attached to the ribosyl moiety. The synthesis of iodo derivatives (5 R)- and (5 S)- 4 is also described. The diastereoisomers 4 were converted into (5 R)- and (5 S)-2′, 3′,-O-isopropylidene-5-methyl-2, 5′-anhydro-5, 6-dihydrouridine (7) .     

γ-Radiolysis of 2′-deoxy-5-fluorouridine derivatives with sulfur-containing substituents

2′-Deoxy-5-fluorouridine (5-FUdR) derivatives having various types of sulfur-containing substituents at the 5′-O-position were synthesized and their γ-radiolyses were studied in aqueous solutions. The γ-radiolysis of compounds having 1,3-dithiol-2-yl and 1,3-dithian-2-yl substituents at the 5′-O-position efficiently gave 5-FUdR, specifically via the attack of hydroxyl radical. On the other hand, the γ-radiolysis of a compound having a sulfonylmethyl substituent at the 5′-O-position gave less efficiently 5-FUdR, specifically via the attack of the hydrated electron. The mechanistic features of these reactions are discussed.     

A reinvestigation of the structures for 5-diazouracil, 5-diazouridine, 5-diazo-2′-deoxyuridine and certain related derivatives by proton magnetic resonance spectroscopy

The structure of 5-diazouracil and several closely related derivatives have been revised on the basis of pmr spectroscopy. 5-Diazouracil, 5-diazouracil hydrate, 5-diazouracil methanol adduct, 5-diazouridine and 5-diazo-2′-deoxyuridine have been reassigned the structures 5-diazopyrimidin-2,4(3H)dione (XI), 5-diazo-6-hydroxy-1,6-dihydropyrimidin-2,4(1H,3H,6H)dione (XIII), 5-diazo-6-methoxy-1,6-dihydropyrimidin-2,4(1H,3H,6H)dione (XII), 1 -(β-D-ribofuranosyl)-O^5′ -6(S)cyclo-5-diazo-1,6-dihydropyrimidin-2,4(3H,6H)dione (XVII) and 1-(2-deoxy-β-D-ribofuranosyl)-O^5′ -6(S)cyclo-5-diazo-1,6-dihydropyrimidin-2,4(3H,6H)dione (XIX), respectively. Treatment of XII with dimethylamine resulted in a coupling of the 5-diazo group with dimethylamine and a concomitant rearomatization of the heterocyclic ring by expulsion of the 6-methoxy group to furnish 5-(3,3-dimethyl-1-triazeno)uracil (XIV). A similar reaction of XIX and XVII with dimethylamine furnished the corresponding 5-(3,3-dimethyl-1-triazeno)derivatives. The effect which certain resonance hybrids of the diazo moiety may exert in reactions of the above hetero-cycles and the assignment of S configuration at C-6 for the nucleoside derivatives is also discussed.     

Synthesis of 5H-pyrido[2,3-a]phenoxazin-5-one and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives

The 5H-pyrido[2,3-a]phenoxazin-5-one derivatives and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives were prepared by the condensation of substituted 2-aminophenols with 6,7-dibromo-5,8-quinolinequinone followed by dehalogenation in the presence of sodium hydrosulfite dissolved in aqueous pyridine under a nitrogen atmosphere.     

Synthesis of 3-Aryl-5-C-Glycosylisoxazoles from Several Aldehydo-Sugar Derivatives

ABSTRACT

The synthesis of several 3-aryl-5-glycosylisoxazole derivatives has been achieved. By condensation of the protected aldehydo-sugars 2,3-O-isopropylidene-D-glyceraldehyde (1), 2,3:4,5-di-O-isopropylidene-aldehydo-D-arabinose (2) and D-xylose (3), and 2,5-anhydro-3,4,5-tri-O-benzoyl-D-mannose (4) with benzoylmethylenetriphenylphosphorane, enulose derivatives were formed, which were later converted into a,ß-unsaturated ketoximes. These ketoximes were oxidatively cyclized with iodine and, after removal of the hydroxyl protecting groups, 3-phenyl-5-glycosylisoxazoles were formed.     

Formation and properties of positively charged colloids based on polyelectrolyte complexes of biopolymers

Formation of colloids based on polyelectrolyte complexes (PECs) was mainly studied with synthetic polyelectrolytes. In this study, we describe the elaboration of positively charged PEC particles at a submicrometer level obtained by the complexation between two charged polysaccharides, chitosan as polycation and dextran sulfate (DS) as polyanion. The complexes were elaborated by dropwise addition of default amounts of DS to excess chitosan. Quasi-elastic light scattering was used to investigate in detail the influence of the characteristics of components (chain length, degree of acetylation) and parameters linked to the reaction of complexation (molar mixing ratio, ionic strength, concentration in polymer) on the sizes and polydispersity of colloids. Chain length of chitosan is the major parameter affecting the dimensions of the complexes, high molar mass chitosans leading to the largest particles. Variations of hydrodynamic diameters of PECs with the molar mass of chitosan are consistent with a mechanism of particle formation through the segregation of the neutral and then hydrophobic blocks of the polyelectrolyte complexed segments. Resulting particles display probably a structure constituted by a neutral core surrounded by a chitosan shell ensuring the colloidal stabilization. Such a structure was evidenced by measurements of electrophoretic mobilities revealing that the positive charge of particles was decreasing with pH, in relation with the neutralization of excess glucosamine hydrochloride moieties.     

Formation of soluble chitosan–carrageenan polyelectrolyte complexes

The formation process of soluble chitosan (C)/κ-carrageenan (K) complexes was studied. It was shown that soluble complexes were obtained preferentially by mixing the starting components at given ratios whereas soluble complexes were formed only over a narrow range of starting-component ratios by titration of K with C. The formation of C/K polyelectrolyte complexes was confirmed by gel-permeation chromatography and centrifugation in a Percoll gradient. The formation process of C/K complexes depended on the C molecular weight and the concentrations and ratios of starting polysaccharides. It was shown that unbound components in addition to the complex remained in the mixture upon mixing carrageenan with high-molecular-weight C (C-HM) in 1:1.5 and 1:30 ratios (mol/mol) whereas low-molecular-weight C (C-LM) was bonded completely to the polyanion.     

Effect of Crosslinking Agent on Neem (Azadirachta Indica A. Juss.) Seed Oil (NSO) Encapsulated Microcapsules of κ -Carrageenan and Chitosan Polyelectrolyte Complex

Microencapsulation of neem (Azadirachta Indica A. Juss.) seed oil (NSO) was carried out by polyelectrolyte complexation of κ -carrageenan and chitosan. The microcapsules were crosslinked by using three different crosslinking agents - glutaraldehyde, genipin and tannic acid. The lowest and highest water uptake capacities were exhibited by glutaraldehyde and tannic acid crosslinked matrices, respectively. The release behavior of NSO from encapsulated crosslinked microcapsules followed the order: tannic acid > genipin > glutaraldehyde. Polyelectrolyte complex formation and its interaction with crosslinker was studied. Crosslinking improved thermal stability without affecting crystallinity. Roughness appeared on microcapsule's surface indicated interaction between microcapsules and crosslinker.     

On-line study of polyelectrolyte network formation by interfacial reaction

A modified synthetic boundary experiment of analytical ultracentrifugation has been employed to examine, on-line, polyelectrolyte complex formation at flat interfaces yielding highly swollen membranes/networks. Systematic experiments with sodium alginate as a polyanion and chitosan and poly(l-lysine) as polycations identified the influence of concentration, pH, molar mass, and polycation type on the membrane characteristics and the formation process. The membranes have been evaluated by five characteristics defined herein: total thickness, compactness, heterogeneity, symmetry, and growth. The results confirm the sensitivity of the method suited to elaborate general relationships for polyelectrolyte membrane design.     

Regioselectively Modified Cellulose and Chitosan Derivatives for Mono- and Multilayer Surface Coatings of Hemocompatible Biomaterials

In this study different synthetic strategies were developed and applied to introduce solely or in combination heparin/heparansulfate-like functional groups such as N-sulfo, O-sulfo, N-acetyl, and N-carboxymethyl groups into chitosan and cellulose with highest possible regioselectivity and completeness and defined distribution along the polymer chain. Completely substituted 6-amino-6-deoxycellulose and related derivatives were prepared from tosylcellulose (DS 2.02; C₆ 1.0) by nucleophilic substitution with azido groups only in the 6-position at 50 °C with subsequent reduction to amino groups and completely removing tosyl groups in the 2,3-position. 2,6-Di-O-sulfocellulose was prepared using the reactivity difference between C-2, C-6 and C-3 of cellulose. The reactivity difference between amino groups and hydroxyl groups was used to prepare various N-substituted derivatives. Partially 2,6-di-O-sulfated cellulose was obtained from trimethylsilylcellulose by the insertion of sulfurtrioxide into the Si–O ether linkage. Partially 3-O-sulfocellulose was synthesized by protecting C-2 and C-6 with trifluoroacetyl groups. A copper–chitosan complex was used to synthesize 6-O-sulfochitosan with a DS of 1.0 at C-6 and various partially 6-O-desulfonated products are possible. Using the phthalimido group to increase the solubility of chitosan in DMF, the regioselectivity of 3-O-sulfo groups was improved by regioselective 6-O-desulfonation of nearly complete 3,6-O-disulfochitosan. The platelet adhesion properties of immobilized regioselectively modified water-soluble derivatives on membranes have been tested in vitro. Some regioselectively modified chitosan and cellulose derivatives are potential candidates for the surface coatings of biomaterials if the regioselective reactions are somewhat further optimized.     

CS-CMC聚合物电解质膜的制备及在电生成FeO42-中的应用

以戊二醛为交联剂, 制备了壳聚糖(CS)-羧甲基纤维素(CMC)聚合物电解质膜. 用电子显微镜观察其表面形貌. IR分析表明该聚合物薄膜含有COOH, NH₃⁺官能团, 具有两性离子的特征. 与CS膜或CMC膜相比, 该膜能稳定存在于酸碱溶液中. 膜特性研究表明CS-CMC聚合物电解质膜具有离子交换和选择性渗透能力, 可作为隔膜电解制备高铁酸盐.     

UNUSUAL FORMATION OF 2-BUTYL-5-ALKYLOXYMETHYLFURAN

An unexpected reaction of 5-O-allyl-3-deoxy-1,2-O-isopropylidene-α-D-glycero-pent-3-eno-furanose (1) and its 5-O-benzyl derivative (5) with n-butyl lithium is described.