Temperature-dependent dielectric studies of fully cured diethylene glycol bis (allyl carbonate)

Studies are presented of the dielectric properties of fully cured diethylene glycol bis (allyl carbonate) as a function of both frequency and temperature. It is shown that the characteristics of the fully cured system are dominated by a localized, secondary transition that is associated with motion of the carbonate unit. The glass transition is shown to contribute little to the dielectric properties within the temperature range 20–70°C. © 1994 John Wiley & Sons, Inc.     

Synthesis of novel bis(chromenes) and bis(chromeno[3,4-C]pyridine) incorporating piperazine moiety

Novel bis(2-oxo-2H-chromene) as well as bis(2-imino-2H-chromene) derivatives incorporating piperazine moiety were prepared by the cyclocondensation reaction of bis(2-hydroxybenzaldehyde) with two equivalents of each of the appropriate β-ketoesters or acetonitrile derivatives. The bis(2-imino-2H-chromene-3-carbothioamide) derivative was used as a key synthon for construction of novel bis(3-(4-substituted thiazol-2-yl)-2H-chromen-2-one) derivatives via its cyclocondensation with a series of the appropriate α-halocarbonyl derivatives. Moreover, the bis(2-hydroxybenzaldehyde) reacted with four equivalents of the appropriate acetonitrile derivatives to afford the corresponding bis(3H-chromeno[3,4-c]pyridine) derivatives. Elucidation of the structure of the novel bis(chromenes) bearing piperazine nucleus was established by the spectral data and elemental analyses.     

含酚羟基Schiff碱化合物的阴离子识别研究

近年来,超分子化学及其应用研究越来越受到科学家的重视[1].许多氢键供体已成功应用于阴离子识别研究中,如酰胺[2]、硫脲[3]及吡咯大环[4]化合物等.含有酚羟基的Schiff碱型化合物常被用于阳离子识别体系中[5,6],而以其为阴离子识别位点的研究相对较少.作为研究超分子化合物的合成、识别性能等工作的一部分[7],我们设计合成了三种具有多位点识别且含有酚羟基的Schiff 碱新型受体.考察了主-客体配合物中所形成的氢键数目对阴离子选择性识别的影响.     

丁二酸二(二乙二醇单甲醚)酯的制备及其应用

以二乙二醇单甲醚和丁二酸酐为原料,对甲苯磺酸为催化剂,在二甲苯中经开环反应合成了丁二酸二(二乙二醇单甲醚)酯(1),其结构经1H NMR和IR确证。采用恒电流充电法、循环伏安扫描和充放电性能测试了电解质溶液[1.2 mol·L-1双三氟甲基磺酰亚胺锂(LiTFSI)/V(1)∶V(EC)∶V(DEC)=3∶3∶4]在锂离子电池中的电化学性能。结果表明:1与石墨负极有较好的相容性,在0 V~2 V,0.1 C下充放电20次后放电比容量为346.2 mAh·g-1,容量保持率为111.10%。     

Bis(tetramethylammonium), bis(tetrabutylammonium), and bis(tetraphenylarsonium) dihydrohexaoxoxenonates(VIII)

Bis(tetramethylammonium), bis(tetrabutylammonium), and bis(tetraphenylarsonium) dihydrohexaoxoxenonates(VIII) were obtained in an aqueous solution and in acetonitriie. The rate constants of their decomposition were determined.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 184–185, January, 1995.This work was carried out with financial support from the International Scientific Foundation (Grant REI 000).     

Small-angle neutron-scattering study of bis(quaternaryammonium bromide) surfactant micelles in water. Effect of the long spacer chain on micellar structure

The microstructure of the normal micelles formed by dimeric surfactants with long spacers, [Br⁻(CH₃)₂N⁺(C _m H_{2 m +1})-(CH₂) _S  -(C _m H_{2 m +1})N⁺(CH₃)₂Br⁻, m = 10 and s = 8, 10 and 12], has been investigated by small-angle neutron scattering and compared with previously reported results for micelles of the same dimeric surfactants with shorter spacers (m = 10 and s = 2, 3, 4 and 6). It was found that for dimeric surfactants with long spacers (s = 8 and 10), both micellar growth and variation in shape occur to only a small extent, if at all, compared with dimeric surfactants with short spacers. However, for the dimeric surfactant with the longest spacer, s = 12, the extent of micellar growth and shape variation is also large. These results are due to the differences in conformation of dimeric surfactants with short spacers (s = 2–6) compared with that of the surfactants with long spacers (s = 8–12). Received: 15 June 1998 Accepted: 22 July 1998     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

网络型聚醚酯弹性体聚柠檬酸二甘醇酯的合成与性能

用一缩二乙二醇(二甘醇)和柠檬酸通过熔融缩聚的方法,合成了一种新型的网络型聚醚酯弹性体—po-ly(diethylene glycol citrate)(PDGC).用FTIR初步表征了预聚物的结构;通过ATR-FTIR、DSC、XRD等表征了PDGC的结构;测试了材料的静态水接触角、力学性能以及体外降解性能,考察了单体的摩尔比以及后期交联时间对材料上述性能的影响.     

Self-assembly architecture of bis(guanidiniums) receptors incorporated by sulfate anions in single crystals

A novel bis(guanidiniums)receptor for the catalytic cleavage of phosphosdiester was prepared and self-assembly architecture through hydrogen bonds and electrostatic interactions a-mong the bis(guanidiniums)receptor,the sulfate anion and water molecule was revealed by X-ray crystallographic analy-     

Degradation mechanism of diethylene glycol units in a terephthalate polymer

Diethylene glycol (DEG) is incorporated into poly(ethylene terephthalate) (PET) during industrial synthesis in order to control crystallisation kinetics. DEG is known to be a weak point in the thermal degradation of PET, which is problematic during the recycling of the polymer.Studies on the thermal decomposition of the model polymer poly(diethylene glycol terephthalate) (PDEGT) have been performed using TG, DSC, TVA and spectroscopic techniques. They revealed a degradation behaviour with two distinct steps, where the first step initiates some 100 K below the degradation temperature of PET. The second step is similar to the behaviour of PET.Based on our observations, a new degradation mechanism specific to DEG units is proposed, where random ether groups along the backbone can back-bite and form cyclic oligomers. These cyclic species, containing ether moieties, are evolved at 245 °C and constitute the first of the two steps of degradation observed for PDEGT.     

Organosoluble and colorless fluorinated poly(ether imide)s from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride and trifluoromethyl‐substituted aromatic bis(ether amine)s

A series of novel aromatic poly(ether imide)s (PEI) containing ortho‐catenated phenylene rings and pendant trifluoromethyl group have been prepared from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride (1) with seven trifluoromethyl‐substituted aromatic bis(ether amine)s ( 2a‐g ) via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by chemical imidization to the polyimides. These PEIs had inherent viscosities in the range of 0.45–1.17 dL/g that corresponded to weight–average and number–average molecular weights (by gel‐permeation chromatography) of 42,000–102,000 and 28,500–67,500, respectively. All the PEIs were readily soluble in many organic solvents and could be solution‐cast into transparent, flexible, and strong films. These films were essentially colorless; they had a very low yellowness index of 4.34–6.55 and an UV–vis absorption cut‐off wavelength at 361–370 nm. The PEIs exhibited moderate‐to‐high glass‐transition temperatures (T_g) in the range of 185–270 °C, softening temperatures (T_s) in the range of 184–275 °C, and 10% weight loss temperatures higher than 466 °C in nitrogen or in air. They also showed low moisture absorptions of 0.49–0.70% and low dielectric constants of 2.78–3.26 (measured at 10 kHz). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3092–3102, 2006     

Polymerization of diethylene glycol bis(allyl carbonate) by means of di-sec-butyl peroxydicarbonate

The initial stages of the free radical polymerization of diethylene glycol bis(allyl carbonate) at temperatures of 35–65°C have been studied. The polymer is unsaturated and cyclization to give a 16-membered ring occurs only to a small extent. The kinetic order with respect to the initiator, di-sec-butyl peroxydicarbonate, has an average value of 0.79; the order increases slightly with peroxydicarbonate concentration over the range 0.018–0.22M. The molecular weight of the polymer isolated after 3% polymerization is close to 19,000. It shows no significant dependence on initiator concentration or on temperature. The dominant feature of the bulk polymerization, as in free radical polymerization of the other allyl and diallyl monomers, is degradative chain transfer in which the growing polymer radical abstracts a hydrogen atom from a monomer unit to give a relatively unreactive allylic radical. The dependence of rate on initiator concentration is rationalized if some of these allylic radicals are able to reinitiate polymerization. The transfer constant to monomer is 0.014 at 50°C, assuming that the main termination step involves mutual termination of allylic radicals. Carbon tetrachloride is an active transfer agent with a transfer constant of 0.20 ± 0.04 at 50°C. Toluene, which is less active, has a transfer constant of 0.0064 at 50°C and also retards the polymerization. Some kinetic studies have been made with other initiators, including di-2-methyl-pentanoyl peroxide which initiates polymerization at temperatures as low as 13°C.     

Simple non-empirical calculations of the zero-field splitting in bis(aquo) bis(malonato) nickel(II)

Summary A simple non-empirical method is applied to calculate the splittings of the ground state triplet, caused by the spin-orbit coupling, in bis(aquo) bis(malonato) nickel(II), allowing for a certain geometry variation. The calculations yield splittings on the order of 10–20 cm^–1. The comparison of exact (within model) and second-order perturbation theory calculations indicate that the spin Hamiltonian formalism is valid. The implications of the results for the theory of nuclear spin relaxation in paramagnetic complexes in solution are discussed.     

Novel organosoluble and colorless poly(ether imide)s based on 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A novel series of colorless and highly organosoluble poly(ether imide)s were prepared from 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride with various fluorinated aromatic bis(ether amine)s via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by cyclodehydration to produce the polymer films. The poly(ether imide)s showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents, in ether‐type solvents, and even in chlorinated solvents. Their films had a cutoff wavelength between 358 and 373 nm, and the yellowness index ranged from 3.1 to 9.5. The glass‐transition temperatures of the poly(ether imide) series were recorded between 237 and 297 °C, the decomposition temperatures at 10% weight loss were all above 494 °C, and the residue was more than 54% at 800 °C in nitrogen. These films showed high tensile strength and also were characterized by higher solubility, lighter color, and lower dielectric constants and moisture absorption than an analogous nonfluorinated polyimide series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3140–3152, 2006     

Synthesis and hydrogenation of acetonylmalonaldehyde bis(ethylene acetal)

A single-step synthetic route to acetonylmalonaldehyde bis(ethylene acetal) from 2,5-dimethoxy-5-methyltetrahydrofuran-3-carbaldehyde was proposed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 562–563, March, 2006.     

Synthesis and transition metal chemistry of a bridging diphosphinite, 1,4 bis(diphenylphosphinoxy)benzene

Diphosphinite ligand, [Ph₂POC₆H₄OPPh₂] (1), is obtained by reacting chloro diphenylphosphine, with 1,4-dihydroxy benzene in presence of triethylamine. Treatment of 1 with elemental sulfur or selenium resulted in the formation of bis(chalcogenide) derivatives, [Ph₂(E)POC₆H₄OP(E)Ph₂] (2, E = S; 3, E = Se) in almost quantitative yield. The binuclear complex [{(η⁶-p-cymene)RuCl₂}₂(Ph₂POC₆H₄OPPh₂)] (4) is produced in the reaction between [Ru(η⁶-p-cymene)Cl₂]₂ and diphosphinite 1. Similarly the reaction of 1 with [Rh(COD)Cl]₂ afforded a binuclear complex [{(COD)RhCl}₂(Ph₂POC₆H₄OPPh₂)] (5), whereas the macrocyclic complex [{(CO)RhCl}(Ph₂POC₆H₄OPPh₂)]₂ (6) is isolated in the reaction of 1 with 0.5 equiv of [RhCl(CO)₂]₂. Compound 1 on treatment with [Pd(COD)Cl₂] or [PdCl₂(SMe₂)₂] in 1:1 molar ratio produced the chloro-bridged binuclear complex [{(PPh₂O)Pd(μ-Cl)(PPh₂OH)}₂] (7) through P-O bond cleavage. Treatment of 1 with two equivalents of CuI in dichlormethane/acetonitrile (1:1) afforded a coordination polymer, [{Cu₂(μ-I)₂(Ph₂POC₆H₄OPPh₂)}_∞] (8) in moderate yield. The binuclear complex, [{AuCl}₂(μ-Ph₂POC₆H₄OPPh₂)] (9) is obtained in the reaction of compound 1 with two equiv of AuCl(SMe₂), where the ligand exhibits bridged bidentate mode of coordination. The molecular structures of 1-4, and 6 are determined by X-ray diffraction studies.     

Preparation of a new receptor for anions, macrocyclic polythiolactam—structure and high anion-binding ability

Thiocarbonylation of a macrocyclic tetralactam gave a new macrocyclic tetrathiolactam. The chemical transformation enhances hydrogen-bonding ability of the NH protons in the cavity of the macrocycle, and provides strong affinity toward anions. The association properties of the polythiolactam with anions was examined, and molecular structures of the macrocycle and its Cl⁻ complex were determined.     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999