Solvent‐Free Ring‐Opening Metathesis Polymerization of Norbornene over Silica‐Supported Tungsten–Oxo Perhydrocarbyl Catalysts

Ring opening metathesis polymerization (ROMP) of bicyclo[2.2.1]hept‐2‐ene (norbornene) is carried out over silica‐supported catalysts based on tungsten complexes bearing an oxo ligand ( 1 : [(SiO)W(O)(CH₂SiMe₃)₃, 2 : [(SiO)W(O)(CHCMe₂Ph)(dAdPO)], dAdPO  2,6 diadamantyl‐4‐methylphenoxide, 3 : [(SiO)₂W(O)(CH₂SiMe₃)₂]). The evaluation of the catalytic activities of the aforementioned materials in ROMP indicates that at low reaction time (0.5 min), the highest polymer yield is obtained with catalyst 2 . However, for longer reaction time (>2 min), complex 3 , a model of the industrial catalyst, exhibits a better monomer conversion. The polymers obtained are characterized. Moreover, these catalysts are shown to be rather preferentially selective to give the cis polynorbornene (>65%), characterized by high melting points (≈300 °C). The experimental values of the average molecular weight (M_n) of polynorbornenes are found to be close to the theoretical ones for the polymers prepared using catalyst 2 and higher for those originated from catalyst 3 .

     

Ring-opening metathesis polymerization (ROMP) of isomerically pure functional monomers and acyclic diene metathesis depolymerization (retro-ADMET) of functionalized polyalkenamers

ROMP and retro-acyclic diene metathesis (ADMET) were used for the synthesis of new functional polymers and functional oligomers, respectively. Purely exo and enantiomerically pure norbornene and 7-oxanorbornene derivatives were prepared using stereospecific synthesis, effective fractionation and high yield condensation reactions. Successful ROMPs of those monomers were performed using either the new carbenic Schrock’s or Grubb’s catalysts or in some cases a classical bicomponent catalyst. New functional polymers such as optically active poly(norbornene-2-carboxylic acid), reactive poly(norbornene-2-azlactone), and side-chain liquid crystal polyoxanorbornenes were fully characterized. On the other hand, successful depolymerizations of 1,4-polyisoprene and of epoxidized 1,4-polybutadiene via cross-metathesis with 4-octene were performed using a stabilized bicomponent catalyst and the Grubb’s catalyst, respectively. Conditions for the controlled synthesis of epoxidized oligobutadienes and of epoxydienic monomers via retro-ADMET were clearly defined.     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Alternate Transition Metal Complex Based Diene Polymerization

Abstract

In the last decade, there has been a tremendous increase in the number of reports on transition metal complex-mediated butadiene homo- and copolymerization. While typical classical titanium, nickel, cobalt, and neodymium based catalysts have been almost exclusively applied to the production of high cis-1,4-polybutadiene, alternative catalyst systems are currently being developed which enable tuning of the polybutadiene microstructure and permit defined changes in polymer properties such as molecular weight distribution and changes in the polymer glass temperature. Besides new products such as high trans-1,4-polybutadiene or a polymer containing a defined amount of 1,2-polybutadiene, there are butadiene copolymers with different amounts of styrene, isoprene, or ethylene. These new materials should lead to new applications especially in the area of tires, high impact polystyrene (HIPS), and ABS. This review elucidates the new developments in the area of transition metal complex-based butadiene homo- and copolymerization focusing mainly on the transition metal catalyst, the polymerization process and the resulting polymers. Mechanistic details are discussed briefly and wherever useful for the understanding of the polymerization reaction.     

Gas transport properties of a series of high Tg polynorbornenes with aliphatic pendant groups

A study of gas transport properties of novel polynorbornenes with increasing length of an aliphatic pendant group R (CH₃ , CH₃(CH₂)₃ , CH₃(CH₂)₅ , CH₃(CH₂)₉ ) has been performed. These polymers were synthesized using novel organometallic complex catalysts via an addition polymerization route. This reaction route maintained the bridged norbornene ring structure in the final polymer backbone. Gas permeability and glass transition temperature were found to be higher than those for polynorbornenes prepared by ring-opening metathesis and reported in the literature. It was shown that for noncondensable gases such as H₂ and He the selectivity over N₂ decreased when the length of the pendant group increased, but remained relatively stable for the more condensable gases (O₂ and CO₂). The permeability coefficient is correlated well to the inverse of the fractional free volume of the polymers. The more condensable gases showed a deviation from this correlation for the longest pendant group, probably due to an increase of the solubility effect. This polymer series demonstrated a simultaneous increase in permeability and selectivity, uncommon for polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 797–803, 1998     

Stereospecific Cyclopolymerization with Group 4 Metallocenes

Homogeneous Ziegler-Natta catalysts are stereoselective cyclopolymerization catalysts for non-conjugated dienes. Cyclopolymerization of 1,5-hexadiene affords poly(methylene-l,3-cyclopentane) (PMCP), a polymer for which four structures of maximum order are possible. A variety of metallocene catalyst precursors have been investigated; the molecular weight and microstructure of the polymers are sensitive to the structure of the catalyst precursor as well as the reaction conditions. The selectivity for cyclization depends on reaction conditions; decreasing the olefin concentration and increasing the temperature of the reaction favor cyclization. The stereochemistry of cyclopolymers can also be controlled with appropriate choice of catalyst precursor. Diastereoselective cyclopolymerization of 1,5-hexadiene with achiral catalysts yields atactic trans-PMCP and cis-PMCP, depending on the catalyst precursor. Enantioselective cyclopolymerization with optically active catalysts yields optically active poly(methylenecyclopentane), a novel example of a polymer which is chiral by virtue of its main-chain stereochemistry.     

Cure characterization and viscosity development of ring-opening metathesis polymerized resins

The ring-opening metathesis polymerization (ROMP) kinetics of three different norbornene-based monomers, ethylidene norbornene (ENB), endo-dicyclopentadiene (DCPD) and exo-DCPD, in the presence of Grubbs’ catalyst are examined using differential scanning calorimetry and rheokinetic viscosity measurements. Several different parameters were considered, such as, the monomer healing agents (including different monomer mixtures), the catalyst concentration, and test temperature to determine how these parameters influence cure development. The polymerization kinetics, quantified by exothermic peak locations in the case of differential scanning calorimetry and rheokinetic transition times in the case of viscosity measurements, are shown to be highly dependent on monomer type and catalyst concentration. The ENB monomer had the fastest kinetics even at the lowest catalyst concentration compared to the other diene monomers and mixtures.     

Copolymers of dicyclopentadiene and tricyclopentadiene

Series of copolymers of dicyclopentadiene and tricyclopentadiene have been prepared by ringopening metathesis polymerization (ROMP) using a catalytic system of [W(=N-phenyl) (2,6-dimethyl phenolate)₄]/n-BuLi. Due to the presence of double bonds, the polymers obtained from ROMP are unstable. Thus the hydrogenation reaction is carried out after ROMP using a catalyst of bis(2,4-pentanediono)nickel/triisobutylaluminium. The polymers obtained were characterized by means of ¹H NMR; the results show an agreement with the proposed structure. Glass transition temperature T _g of the polymers are modulated by the feed mole ratio of dicyclopentadiene and tricyclopentadiene. With the increasing of tricyclopentadiene content, the T _g of the polymers before hydrogenation increases from 153 to 256°C, and the T _g of the polymers after hydrogenation increases from 106 to 188°C. In addition, the different ratio of dicyclopentadiene and tricyclopentadiene in polymer main chains offers different packing patterns to the structure of the copolymers, and leads to their different free volumes and occupied volumes.     

Gas permeation and sorption studies on stereoregular polynorbornene

Advances in the field of membrane gas separation over the past decade have encouraged the search for even better polymers and membranes for gas separation. They also have motivated studies on the relationship between the structure and the gas transport properties of different classes of polymers. Interest has recently been demonstrated in the literature in norbornene polymers with different side groups. These polymers can easily be prepared via ring-opening metathesis polymerization (ROMP) of norbornene (bicyclo[2.2.1]hept-2-ene) derivatives. So far, information on the microstructure of the polymers is scarce, so little is known about the influence of stereochemistry and tacticity of the polymer on gas separation properties. In this work, we present gas permeability and selectivity data for stereoregular unsubstituted polynorbornene. It will be shown that a high order of tacticity has a positive effect on both permeation and separation results. © 1997 John Wiley & Sons, Inc.     

New catalysts for the polymerization of cyclic olefins

Various routes to high T_g thermoplastic materials based on the Ziegler-Natta catalyzed polymerization of norbornene-type monomers are described. These routes involve both ring-opening metathesis polymerization (ROMP) and addition polymerization. New catalysts, and a new catalytically-active metal (cobalt), for both ROMP and the addition homopolymerization of norbornene-type monomers are reported.     

End-functionalized ROMP polymers for Biomedical Applications

We present two novel allyl-based terminating agents that can be used to end-functionalize living polymer chains obtained by ring-opening metathesis polymerization (ROMP) using Grubbs' third generation catalyst. Both terminating agents can be easily synthesized and yield ROMP polymers with stable, storable activated ester groups at the chain-end. These end-functionalized ROMP polymers are attractive building blocks for advanced polymeric materials, especially in the biomedical field. Dye-labeling and surface-coupling of antimicrobially active polymers using these end-groups were demonstrated.     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

7-氧杂降冰片烯的官能化及其开环易位聚合

设计合成了含氧化乙烯重复单元和咪唑盐侧基的降冰片烯类单体,用Grubbs催化剂(PCy3)2Ru(CHPh)Cl2(1)和(SIMes)(PCy3)Ru(CHPh)Cl2(2)对单体进行了开环易位聚合(ROMP).考察了单体在不同条件下(溶剂、温度等)的聚合反应,尤其是在离子液体中ROMP的聚合特征.结果表明,2的催化活性比1的高;2催化单体在有机溶剂中聚合所得聚合物的分子量不可控,而在离子液体[BMIm]PF6中能够顺利进行均相聚合反应,且对聚合物的分子量可控性较好.用核磁共振谱(NMR)对合成的单体及聚合物的结构进行了表征.用差示扫描量热法(DSC)测定聚合物的玻璃化转变温度为-17.34℃,采用循环伏安法测得聚合物的电化学稳定窗口为3.0V.     

Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP,ADMET)

Recent results for synthesis of end-functionalized polymers (EFP) by using olefin metathesis polymerization have been introduced including basic characteristics in ring-opening metathesis polymerization (ROMP) of cyclic olefins and acyclic diene metathesis (ADMET) polymerization for synthesis of conjugated polymers. Several approaches were demonstrated for synthesis of EFP by living ROMP using molybdenum (exclusive coupling with aldehyde) and ruthenium catalysts (sacrificial ROMP, chain transfer). Cis specific (Z selective) ROMPs were achieved by molybdenum, ruthenium, and vanadium catalysts by the ligand modification. The catalytic synthesis of EFP with high cis selectivity has been achieved by combined ROMP with chain transfer by V(CHSiMe₃)(N-2,6-Cl₂C₆H₃)[OC(CF₃)₃](PMe₃)₂. The ADMET polymerization using molybdenum and ruthenium catalysts afforded defect-free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The methods for precise synthesis of EFPs, exhibiting unique optical properties combined with the end groups, were developed. The catalytic one-pot syntheses for EFPs have also been developed.     

Living ring opening metathesis polymerization of mesogenic norbornene derivatives

A new class of SCLCPs was prepared by polymerizing mesogenic norbornene derivatives using Mo(CHCMe₂R)(N-2,6-C₆H₃-i-Pr₂)(O-t-Bu)₂ (R = CH₃ or Ph). Monomers based on norbornene ring systems were chosen because the rings are highly strained and therefore yield irreversible polymerizations. The Mo-alkylidene initiators were chosen because they initiate norbornene derivatives relatively fast and quantitatively, and provide stable chain ends which have low reactivity to both the internal double bonds of the polymer backbone and the functional groups present in the monomers. The apparent absence of termination and transfer reactions in ROMP results in polymerizations which appear to be living, and the fast initiation and irreversible chain growth leads to polymers with narrow molecular weight distributions in which the degree of polymerization is controlled by the ratio of monomer to initiator used. The resulting well-defined polymers were used to determine the most basic structure-property relationships of this new class of SCLCPs. The thermotropic behavior of both terminally attached and laterally attached SCLCPs based on polynorbornene backbones becomes independent of molecular weight at approximately 25 repeat units. In addition, polydispersity was found to have no effect on the breadth of nematic phase transitions in the terminally attached polymers, with the transition temperature determined simply by the number average degree of polymerization.     

Tetrablock Metallopolymer Electrochromes

Multi‐block polymers are highly desirable for their addressable functions that are both unique and complementary among the blocks. With metal‐containing polymers, the goal is even more challenging insofar as the metal properties may considerably extend the materials functions to sensing, catalysis, interaction with metal nanoparticles, and electro‐ or photochrome switching. Ring‐opening metathesis polymerization (ROMP) has become available for the formation of living polymers using highly efficient initiators such as the 3rd generation Grubbs catalyst [RuCl₂(NHC)(=CHPh)(3‐Br‐C₅H₄N)₂], 1 . Among the 24 possibilities to introduce 4 blocks of metallopolymers into a tetrablock metallocopolymer by ROMP using the catalyst 1 , two viable pathways are disclosed. The synthesis, characterization, electrochemistry, electron‐transfer chemistry, and remarkable electrochromic properties of these new nanomaterials are presented.     

Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

Covalently Immobilized Colloidal Metal Particles as Selective Catalysts for Olefin Hydrogenation

Abstract

Homogeneous colloidal dispersions of ultrafine noble metal particles have been prepared by the reduction of the corresponding metal ions in the presence of protective polymers. These colloidal metal particles show effective and selective catalyses in hydrogenation of olefins’. However, separation of these homogeneous catalysts from reaction mixtures for the repeated use is difficult. Thus, immobilization of these colloidal metal particles to supports is required. This paper reports immobilization of colloidal rhodium particles onto polymer support by use of covalent bonding between the protective polymer and the support. Activities and selectivities of the resultant immobilized catalysts for hydrogenation of olefins are shown.     

Novel co-catalytic activity of zinc metal with classical initiators for the ring opening polymerisation of norbornene

Zinc metal was shown to considerably increase the activity of the metal(III) chloride salts of ruthenium, iridium and osmium as metathesis initiators for the ROMP of norbornene. The stereochemistry of the polymers formed was determined by ¹H and ¹³C NMR. Formation of the initial carbene species is not via the normally accepted vinyl hydride mechanism. An alternative mechanism involving a metallacyclopentane intermediate is postulated.     

Influence of residual impurities on ring‐opening metathesis polymerization after copper(I)‐catalyzed alkyne‐azide cycloaddition click reaction

Bottlebrush polymers (BBPs) are three‐dimensional polymers with great academic and industrial potential owing to their highly tunable and intricate architecture. The most popular method to synthesize BBPs is ring‐opening metathesis polymerization (ROMP) with Grubbs' catalyst, allowing living grafting‐through polymerization of macromonomers of up to ultrahigh molecular weights with narrow molecular weight distribution. In this case, it has been well recognized that the purity of macromonomers (MMs) is critical for a successful ROMP reaction. For MMs synthesized from reversible‐deactivation radical polymerization, Grubbs and Xia demonstrated that the better control of ROMP reaction can be achieved when they are prepared via “growth‐then‐coupling” method that is coupling a norbornenyl group to end‐functionalized prepolymers. However, these MMs can also contain various residual impurities from previous synthetic steps, which can potentially poison the catalyst and hamper the ROMP reaction. Herein, we intentionally doped possible impurities into purified MMs to identify the most poisoning species. As a result, it was found that alkyne‐functionalized norbornene most significantly retarded the ROMP reaction due to a formation of Ru‐vinyl‐carbene intermediates having low catalytic reactivity, whereas the other reagents such as solvent, Cu‐catalyst, ligands, and azido‐terminated prepolymers were relatively inert. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 726–737