129Xe NMR Studies of Pecan Shell-Based Biochar and Structure-Process Correlations

Pecan shell-based biochar is utilized as a filtration medium, sequestrant for metallic ions, soil conditioner, and other applications. One process for creating the biochar involves the use of phosphoric acid at high temperature in a partial oxygen atmosphere to produce a highly porous carbonaceous material. In this work, we found ¹²⁹Xe NMR to be an excellent technique to study micropores in biochar. Thus, the ¹²⁹Xe chemical shift in biochar was found to vary linearly with the xenon pressure; from the data an estimate of about 8–9 Å could be proposed for the average pore diameter in pecan shell-based biochar. Through saturation recovery and 2-D NMR exchange experiments, information on the exchange between free versus bound xenon was obtained. Furthermore, correlations of ¹²⁹Xe NMR data with the carbonization process conditions were made.     

Programming A Molecular Relay for Ultrasensitive Biodetection through 129Xe NMR

A supramolecular strategy for detecting specific proteins in complex media by using hyperpolarized ¹²⁹Xe NMR is reported. A cucurbit[6]uril (CB[6])‐based molecular relay was programmed for three sequential equilibrium conditions by designing a two‐faced guest (TFG) that initially binds CB[6] and blocks the CB[6]–Xe interaction. The protein analyte recruits the TFG and frees CB[6] for Xe binding. TFGs containing CB[6]‐ and carbonic anhydrase II (CAII)‐binding domains were synthesized in one or two steps. X‐ray crystallography confirmed TFG binding to Zn²⁺ in the deep CAII active‐site cleft, which precludes simultaneous CB[6] binding. The molecular relay was reprogrammed to detect avidin by using a different TFG. Finally, Xe binding by CB[6] was detected in buffer and in E. coli cultures expressing CAII through ultrasensitive ¹²⁹Xe NMR spectroscopy.     

129Xe NMR study of the localization of PdCl2 supported on carbon nanotubes

Localization of PdCl₂ clusters supported on multi-wall carbon nanotubes (MWCNT) has been investigated using ¹²⁹Xe NMR of adsorbed xenon. As-made MWCNTs with channels initially inaccessible for adsorption and ball-milled MWCNTs with the totally accessible internal surface were used as supports. The observed ¹²⁹Xe NMR spectra were determined by the dynamics of xenon exchange between the aggregate pores and nanotube channels. No considerable changes of the ¹²⁹Xe NMR spectrum with the concentration of supported PdCl₂ were observed for the as-made MWCNT, while an additional resonance appeared for the ball-milled nanotubes. The ¹²⁹Xe NMR experiments evidenced the supported species to be localized on the internal surface of the ball-milled MWCNT.     

129Xe NMR chemical shift in Xe@C60 calculated at experimental conditions: Essential role of the relativity,dynamics, and explicit solvent

The isotropic ¹²⁹Xe nuclear magnetic resonance (NMR) chemical shift (CS) in Xe@C₆₀ dissolved in liquid benzene was calculated by piecewise approximation to faithfully simulate the experimental conditions and to evaluate the role of different physical factors influencing the ¹²⁹Xe NMR CS. The ¹²⁹Xe shielding constant was obtained by averaging the ¹²⁹Xe nuclear magnetic shieldings calculated for snapshots obtained from the molecular dynamics trajectory of the Xe@C₆₀ system embedded in a periodic box of benzene molecules. Relativistic corrections were added at the Breit–Pauli perturbation theory (BPPT) level, included the solvent, and were dynamically averaged. It is demonstrated that the contribution of internal dynamics of the Xe@C₆₀ system represents about 8% of the total nonrelativistic NMR CS, whereas the effects of dynamical solvent add another 8%. The dynamically averaged relativistic effects contribute by 9% to the total calculated ¹²⁹Xe NMR CS. The final theoretical value of 172.7 ppm corresponds well to the experimental ¹²⁹Xe CS of 179.2 ppm and lies within the estimated errors of the model. The presented computational protocol serves as a prototype for calculations of ¹²⁹Xe NMR parameters in different Xe atom guest–host systems. © 2013 Wiley Periodicals, Inc.     

MCM-41分子筛的合成及129Xe核磁共振的研究

Purely siliceous MCM-41 with a narrow pore-size distribution, different pore size, high surface area was synthesized . As prepared, calcined and catalytically tested MCM-41 materials have been comprehensively characterized by N₂ adsorption/desorption at 77K and ¹²⁹Xe NMR. By adding mesitylene during the synthesis, the pore size of MCM-41 was enlarged to 5.2nm. The chemical shift in ¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the MCM-41 is one dimensional pore channels .     

Grand canonical Monte Carlo simulations of the 129Xe NMR line shapes of xenon adsorbed in (+/-)-[Co(en)3]Cl3

The 129Xe NMR line shapes of xenon adsorbed in the nanochannels of the (+/-)-[Co(en)3]Cl3 ionic crystal have been calculated by grand canonical Monte Carlo (GCMC) simulations. The results of our GCMC simulations illustrate their utility in predicting 129Xe NMR chemical shifts in systems containing a transition metal. In particular, the nanochannels of (+/-)-[Co(en)3]Cl3 provide a simple, yet interesting, model system that serves as a building block toward understanding xenon chemical shifts in more complex porous materials containing transition metals. Using only the Xe-C and Xe-H potentials and shielding response functions derived from the Xe@CH4 van der Waals complex to model the interior of the channel, the GCMC simulations correctly predict the 129Xe NMR line shapes observed experimentally (Ueda, T.; Eguchi, T.; Nakamura, N.; Wasylishen, R. E. J. Phys. Chem. B 2003, 107, 180-185). At low xenon loading, the simulated 129Xe NMR line shape is axially symmetric with chemical-shift tensor components delta(parallel) = 379 ppm and delta(perpendicular) = 274 ppm. Although the simulated isotropic chemical shift, delta(iso) = 309 ppm, is overestimated, the anisotropy of the chemical-shift tensor is correctly predicted. The simulations provide an explanation for the observed trend in the 129Xe NMR line shapes as a function of the overhead xenon pressure: delta(perpendicular) increased from 274 to 292 ppm, while delta(parallel) changed by only 3 ppm over the entire xenon loading range. The overestimation of the isotropic chemical shifts is explained based upon the results of quantum mechanical 129Xe shielding calculations of xenon interacting with an isolated (+/-)-[Co(en)3]Cl3 molecule. The xenon chemical shift is shown to be reduced by about 12% going from the Xe@[Co(en)3]Cl3 van der Waals complex to the Xe@C2H6 fragment.     

129Xe and 131Xe nuclear magnetic dipole moments from gas phase NMR spectra

³He, ¹²⁹Xe and ¹³¹Xe NMR measurements of resonance frequencies in the magnetic field B₀ = 11.7586 T in different gas phase mixtures have been reported. Precise radiofrequency values were extrapolated to the zero gas pressure limit. These results combined with new quantum chemical values of helium and xenon nuclear magnetic shielding constants were used to determine new accurate nuclear magnetic moments of ¹²⁹Xe and ¹³¹Xe in terms of that of the ³He nucleus. They are as follows: μ(¹²⁹Xe) = ?0.7779607(158)μ_N and μ(¹³¹Xe) = +0.6918451(70)μ_N. By this means, the new ‘helium method’ for estimations of nuclear dipole moments was successfully tested. Gas phase NMR spectra demonstrate the weak intermolecular interactions observed on the ³He and ¹²⁹Xe and ¹³¹Xe shielding in the gaseous mixtures with Xe, CO₂ and SF₆. Copyright © 2015 John Wiley & Sons, Ltd.     

Excellent Ag+ selective receptors: Syntheses and complexation properties of novel biscalix[4]arene with benzalazine groups

By reacting mono-substituted or 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (3 or 4) with hydrazine hydrate in ‘1+2’ or ‘2+2’ condensation mode, novel benzalazine-bridging biscalix[4]arenes 5 and 7 were conveniently obtained in the yields of 76 and 81%, respectively. Condensation of compound 4 and salicylide hydrazone gave a novel calix[4]arene benzalazine derivative 6 in the yield of 85%. The structures and conformations of all new compounds were characterised by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. Biscalix[4]arene 7 adopts a symmetrical cone conformation with tube cavity. The liquid–liquid extraction experiment showed that all new hosts possessed excellent complexation abilities towards soft metal cations. Compound 7 exhibited high complexation selectivity towards Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentages of host 7 were as high as 73.1 and 54.9, respectively. The UV–vis spectra complexation experiments revealed that the complexation constant of receptor 7 with Ag⁺ was 1.9 × 10⁵ M^? 1 and the 1:1 stoichiometry of receptor 7–Ag⁺ complex was formed. The ¹H NMR spectra complexation experiments suggested that Ag⁺ was bound in a cavity composed of two benzalazine groups on bridging chains.     

Probing polymer colloids by Xe NMR

Model aqueous dispersions of polystyrene, poly(methyl methacrylate), poly(n-butyl acrylate) and a statistical copolymer poly(n-butyl acrylate-co-methyl methacrylate) were studied using xenon NMR spectroscopy. The ¹²⁹Xe NMR spectra of these various latexes reveal qualitative and quantitative differences in the number of peaks and in their line widths and chemical shifts. Above the glass transition temperature, exchange between xenon sorbed in the particle core and free xenon outside the particles is fast on the ¹²⁹Xe spectral time-scale and a single ¹²⁹Xe signal is observed. At temperatures below the glass transition temperature, the exchange between sorbed and free xenon is slow on the ¹²⁹Xe spectral time-scale and two ¹²⁹Xe NMR signals can be observed. If the signal of sorbed ¹²⁹Xe is observed, its chemical shift, line width and integral relative to the integral of free ¹²⁹Xe can be used for the characterization of the particle core. The line width of free ¹²⁹Xe provides the residence time of xenon outside the particles and can be used to determine the rate constant characterizing the kinetics of penetration of xenon in the particles. This rate constant emerges as promising parameter for the characterization of the polymer particle surface.     

A Genetically Encoded β‐Lactamase Reporter for Ultrasensitive 129Xe NMR in Mammalian Cells

Molecular imaging holds considerable promise for elucidating biological processes in normal physiology as well as disease states, but requires noninvasive methods for identifying analytes at sub‐micromolar concentrations. Particularly useful are genetically encoded, single‐protein reporters that harness the power of molecular biology to visualize specific molecular processes, but such reporters have been conspicuously lacking for in vivo magnetic resonance imaging (MRI). Herein, we report TEM‐1 β‐lactamase (bla) as a single‐protein reporter for hyperpolarized (HP) ¹²⁹Xe NMR, with significant saturation contrast at 0.1 μm . Xenon chemical exchange saturation transfer (CEST) interactions with the primary allosteric site in bla give rise to a unique saturation peak at 255 ppm, well removed (≈60 ppm downfield) from the ¹²⁹Xe‐H₂O peak. Useful saturation contrast was also observed for bla expressed in bacterial cells and mammalian cells.     

Synthesis,characterization, and solution behavior of mercury(II) chloride complexes with phosphine tellurides

The reaction of mercury(II) chloride with neutral phosphine telluride ligands (R₃PTe) produced new mercury(II) complexes, HgCl₂(R₃PTe)₂ [R = Me₂N (1), Et₂N (2), C₄H₈N (3), C₅H₁₀N (4) or ^n-Bu (5)]. Attempts to isolate the complex of HgCl₂ with the morpholinyl ligand, (OC₄H₈N)₃PTe, were unsuccessful. Complexes 1–5 have been characterized by elemental analyses, IR, and multinuclear (³¹P, ¹²⁵Te, and ¹⁹⁹Hg) NMR spectroscopy. The solution behavior of the complexes was investigated using variable temperature NMR spectroscopy in the presence of excess ligand and indicated fast ligand exchange on the NMR timescale at room temperature. The metal–ligand exchange barriers in these complexes were estimated to be in the range 8–11 kcal/mol. The results suggest that a slight change in the nature of the substituents on the phosphorus of the ligand can contribute considerably to the lability of the complex obtained. The NMR data are discussed and compared with those obtained for related phosphine chalcogenide systems.     

Inclusion complexes with cyclodextrin and usnic acid

Molecular inclusion complexes of usnic acid (UA) with β-cyclodextrin (β-CD) and 2-hydroxypropyl β-cyclodextrin (HP β-CD) were prepared by the co-precipitation method in the solid state in the molar ratio of 1:1. Structural complexes characterization was based on different methods, FTIR, ¹H NMR, XRD and DSC. Parallel to the complex by the above methods, corresponding physical mixtures of UA with cyclodextrins and complexing agents (β-CD, HP β-CD and UA) were analyzed. The results of DSC analysis showed that, at around 200 °C, the endothermal peak in the complexes with cyclodextrins originating from the UA melting has disappeared. Complex diffractogram patterns do not contain peaks characteristic for the pure UA. They are more appropriate to cyclodextrin diffractogram. This fact points to the molecular encapsulation of UA in the cyclodextrin cavity. Chemical shifts in ¹H NMR spectra after the inclusion of UA into the cyclodextrin cavity, especially H-3 protons (0.0012 and 0.0102 ppm in the β-CD and HP β-CD, respectively) and H-5 and H-6 (0.0134 ppm) and hydrogen from CH₃ (0.0073 ppm) HP β-CD also points to the formation of molecular inclusion complexes. The improved solubility of UA in water was achieved by molecular incapsulation. In the complex with β-CD the solubility is 0.3 mg/cm³, with HP β-CD 4.2 mg/cm³ while the uncomplexed UA solubility is 0.06 mg/cm³. The microbial activity of UA and both complexes was tested against eight bacteria and two fungi and during the test no reduced activity of UA in the complexes was observed.     

Inclusion Complex Formation of Thiacalix[4]arene and Xe in Aqueous Solution Studied by Hyperpolarized 129Xe NMR

The inclusion complex formation of 4-sulfothiacalix[4]arene sodium salt (STCAS) and Xe has been investigated by using hyperpolarized ¹²⁹Xe NMR spectroscopy. Our new continuous-flow type hyperpolarizing system has advantageous capabilities that can supply hyperpolarized gases continuously and directly to a sample solution in a NMR tube. Consequently saturated Xe concentration in the aqueous solution of STCAS is maintained during the NMR experiment, and ¹²⁹Xe NMR spectra can be obtained in remarkably short time. STCAS concentration dependence of ¹²⁹Xe chemical shift has been analyzed in an elaborated way by a computer method as well as a simple graphic method that we have proposed. The association constant K:13.6±0.8 M⁻¹ at 25 °C was obtained, and further analysis of the temperature dependence has successfully given thermodynamic parameters of enthalpy (ΔH) and entropy (ΔS) for the inclusion complex formation: ΔH = −11.9±1.9 kJ mol⁻¹ and ΔS = −17.4±5.8 JK⁻¹ mol⁻¹. The energetic aspects of complex formation are discussed from the size effect and from the molecular theory of standard entropy, and a release of definite number of water molecules from STCAS cavity is suggested in the inclusion complex formation with Xe.     

Melamine-mediated self-assembly of a Cu(II)–methylmalonate complex assisted by π+–π+ and anti-electrostatic H-bonding interactions

A Cu(II)-methylmalonate complex, (C₃H₇N₆)₄[Cu(II)(C₄H₄O₄)₂](H₂O)₄Cl₂ (1) (where C₃H₇N₆ = protonated melamine, C₄H₄O₄ = methylmalonic acid), has been synthesized from aqueous media and its crystal structure was determined by single-crystal X-ray diffraction. The anionic Cu(II)-methylmalonate complex mediated formation of interesting supramolecular assemblies in the solid state by means of ionic interactions with protonated melamine. Moreover, other forces such as antielectrostatic H-bonding and π⁺–π⁺ interactions also play a crucial role in defining the final 3-D architecture of 1. An interesting stacking among protonated melamine molecules is studied by DFT calculations. Lattice water molecules and chlorides form various hydrogen bonds to take part in the self-assembly processes.     

Directly Functionalized Cucurbit[7]uril as a Biosensor for the Selective Detection of Protein Interactions by 129Xe hyperCEST NMR

Advancement of hyperpolarized ¹²⁹Xe MRI technology toward clinical settings demonstrates the considerable interest in this modality for diagnostic imaging. The number of contrast agents, termed biosensors, for ¹²⁹Xe MRI that respond to specific biological targets, has grown and diversified. Directly functionalized xenon-carrying macrocycles, such as the large family of cryptophane-based biosensors, are good for localization-based imaging and provide contrast before and after binding events occur. Noncovalently functionalized constructs, such as cucurbituril- and cyclodextrin-based biosensors, benefit from commercial availability and optimal exchange dynamics for CEST imaging. In this work, we report the first directly functionalized cucurbituril used as a xenon biosensor. Biotinylated cucurbit[7]uril (btCB7) gives rise to a ¹²⁹Xe hyperCEST response at the unusual shift of δ=28 ppm when bound to its protein target with substantial CEST contrast. We posit that the observed chemical shift is due to the deformation of btCB7 upon binding to avidin, caused by proximity to the protein surface. Conformational searches and molecular dynamics (MD) simulations support this hypothesis. This construct combines the strengths of both families of biosensors, enables a multitude of biological targets through avidin conjugation, and demonstrates the advantages of functionalized cucurbituril-based biosensors.     

Determination of Reduced Nicotinamide Adenine Dinucleotide Based on Immobilization of Tris(2,2′‐bipyridyl) Ruthenium(II) in Multiwall Carbon Nanotubes/Nafion Composite Membrane

Abstract

An electrochemiluminescence (ECL) method for reduced nicotinamide adenine dinucleotide (NADH) was proposed by immobilizing tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃ ²⁺) in multiwall carbon nanotubes (MWCNTs)/Nafion composite membrane that was formed on glassy carbon electrode surface. The electrochemical and ECL behaviors of the immobilized Ru(bpy)₃ ²⁺ were investigated. The cyclic votammogram of the modified electrode in pH 7.0 phosphate buffer solution showed a couple of redox peaks at +1190 and +1060 mV at 100 mV/s. The composite film had a more open structure and a large surface area allowing faster diffusion of Ru(bpy)₃ ²⁺. The presence of MWCNTs resulted in the improved ECL sensitivity and longer‐term stability of the modified electrode. The modified electrode showed a linear response to NADH in the concentration range of 1.0×10^?6 to 1.6×10^?5 M with a detection limit of 8.2×10^?7 M.     

A biacylhydrazone-based chemosensor for fluorescence ‘turn-on’ detection of Al3+ with high selectivity and sensitivity

A simple Al³⁺ fluorescent chemosensor (1) based on diacylhydrazone has been designed and synthesized by the condensation reaction of 2-hydroxy naphthaldehyde and metaphthalic hydrazide. The chemosensor 1 displays a specific and sensitive response to Al³⁺ over other cations in DMSO solution. Upon the addition of DMSO solution of Al³⁺, the sensor 1 shows an immediate fluorescence ‘turn-on’ response and emitting strong blue emission with visible color change from colorless to green. The fluorescence quantum yield enhanced from 7.24% to 48.68%. Meanwhile, the fluorescence and UV absorption spectra detection limits of the chemosensor 1 for Al³⁺ were 2.0 × 10^?7 M and 5.6 × 10^?7 M respectively, indicating the high sensitivity of 1 to Al³⁺. Furthermore, test strips based on 1 were fabricated, which could be used as a convenient test kit for the detection of Al³⁺ and an efficient Al³⁺ controlled fluorescent security display materials.     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

Inclusion Interactions of Cucurbit[7]uril with Adenine and its Derivatives

Interactions of cucurbit[7]uril (Q[7] host) with guest adenine (g1), adenosine (g2) and 2′,3′-o-isopropylideneadenosine (g3) were studied in details by ¹H NMR, UV absorption spectroscopy, fluorescence spectroscopy and high performance liquid chromatography (HPLC) methods. We found that the suitable pH range for interaction was between 1 and 7, and the optimal pH range was between 2 and 4. The ¹H NMR analysis indicated that Q[7] selectively interacted with the adenine moiety of the guests g1 and g2, while Q[7] selectively interacted with the D-ribose sugar ring moiety of the guest g3. Moreover, ¹H NMR spectra showed that the exchange between the bound guest and the free guest was fast on the NMR time scale for the Q[7]-g1 and Q[7]-g2 systems. However, an obvious equilibrium between the bound host/guest and the unbound host/guest were observed in the Q[7]-g3 complex. Several methods were used to determine quantitatively the stability of the three host–guest inclusion complexes formed between Q[7] and the guests. The formation constants by UV and fluorescence were 1.90 × 10⁵ L mol^? 1 and 1.34 × 10⁵ L mol^? 1 for Q[7]-g1, 9.41 × 10⁴ L mol^? 1 and 4.24 × 10⁴ L mol^? 1 for Q[7]-g2, 4.50 × 10⁴ L mol^? 1 and 3.62 × 10⁴ L mol^? 1 for Q[7]-g3, respectively. HPLC method was also introduced to explore the interactions between Q[7] and the adenine and its derivatives. The formation constants of the host–guest inclusion complexes, as determined by HPLC, were 6.76 × 10⁴ L mol^? 1 for Q[7]-g1, 1.80 × 10⁴ L mol^? 1 for Q[7]-g2, 3.01 × 10⁴ L mol^? 1 for Q[7]-g3 respectively. Our study suggested that Q[7] could be a suitable host for the delivery of bioactive molecules, such as the adenine and its derivatives.     

Determination of Edible Vegetable Oil Adulterants in Sesame Oil Using 1H Nuclear Magnetic Resonance Spectroscopy

An NMR method is reported for the determination of sesamin to verify the authenticity of sesame oil. The intensity of the well-resolved H2′ sesamin signal resonating at approximately 5.95 ppm is strongly correlated with the amounts of other types of vegetable oils present in the adulterated sesame oil using the relationship, y = 4.020x + 1.516 (r ²  = 0.9967). The H2′ peak intensity of sesamin was measured for sesame oil extracted directly from the mill-sourced sesame seeds because the sesame oils purchased from local markets could be adulterated. Additionally, the oils used were obtained from the seeds native to China and the Republic of Korea, because the sesamin concentrations may vary from region to region. The proposed ¹H NMR method allows for the simple identification and determination of cheaper vegetable oils used as adulterants in sesame oil. High-performance liquid chromatography was used to confirm the validity of the results obtained by NMR.