Catalytic action of metallic salts in autoxidation and polymerization. IV. Polymerization of methyl methacrylate by cobalt(II) or (III) acetylacetonate–tert-butyl hydroperoxide or dioxane hydroperoxide

Polymerization of methyl methacrylate was carried out by four initiating systems, namely, cobalt(II) or (III) acetylacetonate–tert-butyl hydroperoxide (t-Bu HPO) or dioxane hydroperoxide (DOX HPO). Dioxane hydroperoxide systems were much more effective for the polymerization of methyl methacrylate than tert-butyl hydroperoxide systems, and cobaltous acetylacetonate was more effective than cobaltic acetylacetonate in both hydroperoxides. The initiating activity order and activation energy for the polymerization were as follows: Co(acac)₂–DOX HPO (E_a-9.3 kcal/mole) > Co (acac)₃–DOX HPO (E_a = 12.4 kcal/mole) > Co(acac)₂–t-Bu HPO (E_a = 15.1 kcal/mole) > Co(acac)₃–t-Bu HPO (E_a-18.5 kcal/mole). The effects of conversion and hydroperoxide concentration on the degree of polymerization were also examined. The kinetic data on the decomposition of hydroperoxides catalyzed by cobalt salts gave a little information for the interpretation of polymerization process.     

Vinyl Polymerization. 274. Polymerization of Acrylonitrile Initiated by the System Tetramethyl Tetrazene and Co(II) Chloride

Abstract

The binary system of tetramethyl tetrazene (TMT) and Co(II) chloride was used as initiator of acrylonitrile (AN) in dimethylformamide. The initial rate of polymerization (Rp) was found to be expressed by Rp = k[TMT]^0.62[Co(II) chloride]^0.57 [AN]^2.00

The polymerization was confirmed to proceed via a radical mechanism. The over-all activation energy for the polymerization was estimated as 15.1 kcal/mole. On the basis of these results and the product analysis of the reaction between the catalyst components in the absence of monomer, the initiation mechanism of the polymerization is discussed.     

Polymerization of methyl methacrylate by Ziegler-Natta type catalyst systems: Fe(acac)3-AlEt2Br and Fe(acac)3-ZnEt2

The polymerization of methyl methacrylate was carried out with the following Ziegler-Natta type initiating systems: Fe(AcAc)₃-AlEt₂Br, Fe(AcAc)₃-ZnEt₂ (acac = acetyl acetonate). Both the catalyst systems are active under homogeneous conditions in benzene at 40°C for methyl methacrylate polymerization. The polymerization kinetics suggests that the average rate of polymerization was first order with respect to [monomer] for both the catalyst systems, and the overall activation energies were found to be 14.0 and 12.8 kcal mol ^?1.     

Vinyl Polymerization. 282. Vinyl Polymerization Initiated by Dimethylhydroxylamine-Titanous(lll) Chloride Redox System

Abstract

The polymerization of vinyl monomers initiated by dimethylhydroxylamine hydrochloride (DHA)-titanous(III) chloride redox system has been studied in water under a nitrogen atmosphere. In the polymerization of methyl methyacrylate (MMA) initiated by the above system, the rate of polymerization has been found to be proportional to [DHA]^0.5 for DHA concentrations of less than 2.06 × 10^?3 mole/liter, whereas at higher concentrations the rate tends to fall rapidly. The rate has also been found to be proportional to [Ti(m)] ^0.58 and to [MMA] ^1.0. The maximum rate of polymerization has been observed at a 1:1 molar ratio of DHA to Ti(III). The polymerization proceeded via a radical mechanism. The overall activation energy was estimated as 5.5 kcal/mole. It has been suggested that the reduction of dimethylhydroxylamine by titanous(III) chloride yields the dimethylamino radical, which initiates vinyl polymerization. An examination of the initiating capacity of the initiator system for the polymerization of some vinyl monomers has also been made.     

Catalytic action of metallic salts in autoxidation and polymerization. IX. Polymerization of methyl methacrylate with sodium hexanitrocobaltate(III) in mixed solvent of acetone and water

Polymerization of methyl methacrylate with some cobalt (III) complexes was carried out in various solvents and in mixed solvents of acetone and water or alcohols. Sodium hexanitrocobaltate(III) was found to be an effective initiator in mixed solvent of water and acetone. The kinetic study on the polymerization of methyl methacrylate with Na₃[Co(NO₂)₆] in a water-acetone mixed solvent gave the following over-all rate equation: R_p = 8.04 × 10⁴ exp{ ?13,500/RT} [I]^1/2[M]² (mol/1.?sec). The effects of various additives on polymerization rate and the copolymerization curve with styrene suggest that polymerization proceeds via a radical mechanism. The dependence of the polymerization rate on the square of monomer concentration and the spectroscopic data were indicative of the formation of a complex between initiator and monomer.     

Polymerization of 3‐ethynylthiophene with homogeneous and heterogeneous Rh catalysts

3‐Ethynylthiophene (3ETh) was polymerized with Rh(I) complexes: [Rh(cod)acac], [Rh(nbd)acac], [Rh(cod)Cl]₂, and [Rh(nbd)Cl]₂ (cod is η²:η²‐cycloocta‐1,5‐diene and nbd η²:η²‐norborna‐2,5‐diene), used as homogeneous catalysts and with the last two complexes anchored on mesoporous polybenzimidazole (PBI) beads: [Rh(cod)Cl]₂/PBI and [Rh(nbd)Cl]₂/PBI used as heterogeneous catalysts. All tested catalyst systems give high‐cis poly(3ETh). In situ NMR study of homogeneous polymerizations induced with [Rh(cod)acac] and [Rh(nbd)acac] complexes has revealed: (i) a transformation of acac ligands into free acetylacetone (Hacac) occurring since the early stage of polymerization, which suggests that this reaction is part of the initiation, (ii) that the initiation is rather slow in both of these polymerization systems, and (iii) a release of cod ligand from [Rh(cod)acac] complex but no release of nbd ligand from [Rh(nbd)acac] complex during the polymerization. The stability of diene ligand binding to Rh‐atom in [Rh(diene)acac] catalysts remarkably affects only the molecular weight but not the yield of poly(3ETh). The heterogeneous catalyst systems also provide high‐cis poly(3ETh), which is of very low contamination with catalyst residues since a leaching of anchored Rh complexes is negligible. The course of heterogeneous polymerizations is somewhat affected by limitations arising from the diffusion of monomer inside catalyst beads. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2776–2787, 2008     

KINETICS OF POLYMERIZATION OF ACRYLONITRILE INITIATED BY VANADIUM(V)-THIOUREA REDOX SYSTEM

The kinetics of polymerization of acrylonitrile (AN) initiated by quinquevalent vanadium (V~(5+))-thiourea (TU) redox system has been investigated in aqueous nitric acid in the temperature range from 30 to 50℃. The polymerization rate (R_p) can be expressed as follows: In the copolymerization of acryionitrile with methyl acrylate (MA), the reactivity ratios were found to be 1.0 and 1.1, respectively. The experimental observations suggest that the initiating species is probably a complex consisting of a central ion of Lewis acid-VO_2~+ and the ligands of Lewis bases-acrylonitrile, thiourea, and nitrate anions, while the initiating system in lower concentration, the polymerization of acrylonitrile does not occur if the thiourea is acidified prior to its reaction with quinquevalent vanadium. This indicates that the primary radicals (or the monomeric radicals in the present article) are produced by associated thiourea rather than isothlourea.     

Polymerizations of chloral,styrene oxide,and methyl methacrylate initiated by the binary system of bis(acetylacetonato)metal(II) and chloral

The binary system of bis(acetylacetonato)metal(II) [M(acac)₂] and chloral induced the polymerization of chloral [M = Mn(II), Co(II), Mg(II), and Cu(II)], the ring-opening polymerization of styrene oxide [M = Co(II) and Mg(II)], and the radical polymerization of methyl methacrylate [M = Mn(II) and Co(II)]. The similar order of activity of M(acac)₂ as the catalyst for the polymerization of chloral and for the aldol reaction of chloral with acetylacetone, the deactivation of the catalyst by the introduction of a substituent at the 3-position of M(acac)₂, the presence of saturated β-diketone at the end of the polymer of chloral and that of styrene oxide, and the visible light spectral data supporting the formation of the β-ketoalcoholate intermediate in the binary system of Co(acac)₂ and chloral are all experimental findings which suggest that M(acac)₂ is subject to the aldol addition by chloral at the 3-position of the chelated acetylacetone and that the resultant β-ketoalcoholate is a common active species for these polymerizations.     

Aqueous Polymerization of Methyl Methacrylate

Aqueous polymerization of methyl methacrylate (MMA), initiated by the potassium bromate-thioglycollic acid (TGA) redox system, has been studied at 30 ± 0.2° C under positive pressure of nitrogen. The rate is given by K[MMA] [TGA] ⁰[KBrO₃]^x where × = 1 for lower KBrO₃ concentrations and 0.5 for higher KBrO₃ concentrations. The reaction has been studied over the 20–45°C range. The activation energy was found to be 65.72 kJ/mol (15.71 kcal/mol) in the investigated range of temperature. Inorganic electrolytes except MnSO₄·4H₂O and Na₂C₂O₄ depress both the rate of polymerization and the maximum conversion. All the alcohols (viz., MeOH, EtOH, iso-PrOH, tert-BuOH) and acetone depress the rate of polymerization as well as the maximum conversion.     

Tris-o-phenanthrolineiron(lll) Complex as a Photoinitiator of Acrylamide Polymerization

Abstract

The blue Tris-o-phenanthrolineiron(m) complex, Fe(phen)₃ ³⁺, formed in aqueous solution by oxidation of the red ferrous phenanthroline complex by nitric acid, is found to be a good photo-initiator of acrylamide (A.AM) polymerization. Systematic study of the kinetics of polymerization of acrylamide by Fe(phen) ₃ ³⁺ in aqueous nitric acid solution in the presence of light of Δ = 365 nm at room temperature showed that the rate of polymerization R_p was dependent on [A.AM]^1,5, [C] ^0,5, I^0,5, and [HCOOH], and the rate of Fe(phen) ₃ ³⁺disappearance, -R_c, was found to be proportional to [A.AM], [C], I, and [HCOOH], where [A.AM], [C] and [HCOOH] refer to the concentrations of acrylamide, Fe(phen) ₃ ³⁺, and formic acid, respectively, and I refers to light intensity. The kinetic observations are consistent with the interaction of the excited Fe(phen) ₃ ³⁺ with acrylamide molecule to produce a radical R. capable of initiation and also reduction of Fe(phen) ₃ ³⁺, to the stable Fe(phen) ₃ ²⁺. The results of the present study differ from those reported for photo initiation by ion pairs of the type Fe ³⁺X ^n- where ×= CI^?, Br^?, C₂O₄ ^2- OH^?, etc., which may be attributed to differences in the photo-behavior of the two systems.     

Aqueous Polymerization of Methyl Methacrylate Initiated by Ce4+-Glycolic Acid Redox System

The aqueous heterogeneous polymerization of methyl methacrylate (MMA) initiated by the Ce⁴⁺-glycolic acid (GA) redox system was studied at 35 × 0.2°C under a nitrogen atmosphere. The rate of monomer disappearance was proportional to [MMA]¹[GA]¹[Ce⁴⁺]°, and the rate of eerie ion disappearance was found to be directly proportional to [Ce⁴⁺] and [GA] but independent of [MMA]. The activation energy was found to be 34 kJ/mol. The molecular weight of polymethyl methacrylate increased with increasing [MMA] and decreased with increasing [oxidant]. The effect of increasing [H₂SO₄] on polymerization was also studied. The results are compared with those obtained for the aqueous homogeneous polymerization of acrylamide with the same redox pair.     

含胺基功能性单体的聚合研究 XIV.含二甲氨基丙烯酰类衍生物与过硫酸钾引发体系引发的丙烯酰胺聚合

The polymerization of acrylamide (AAm) initiated by the combination of N-(N', N'-dimethylaminomethylene)methacrylamide (DMAMMA) or N, N,-dimethylaminoethyl methacry-late with potassium persulfate were studied kinetically. The rate equation for the AAm polymerization initiated by the above initiation systems were given asRp- Kp[AAm][K₂S₂O₈]^1/2[DMAMMA]^1/2 Rp=Kp[AAm][K₂S₂O₈]^1/2[DMAEMA]^1/2 respectively. The overall activation energies for the above polymerization were determined to be 8.7 Kcal/mol and 9.2 Kcal/mol respectively. The UV analysis for the PAAm initiated by the above initiation systema showed that the polymerizable amines,DMAMMA and DMAEMA notonly joined the redox initiation but also incorprated into the AAm polymer chains. The super high molecule weight,10⁷of PAAm were obtained by using these initiation systems.     

Redox-Initiated Polymerization of Methyl Methacrylate

The redox-initiated polymerization of methyl methacrylate (MMA) by the Ce(IV)-malic acid system has been carried out in aqueous medium under an inert atmosphere. The rate of polymerization was found to be proportional to [MMA]^3/2 [MA]^1/2 [Ce(IV)]^1/2 and the rate of ceric ion disappearance was proportional to [Ce(IV)] but independent of [MMA]. The rate increased linearly up to a certain range of [MA], above which it remained constant. Increasing [H₂SO₄] decreased the rate. The activation energy was found to be 57.44 kJ/mol.     

Polymerization of Methyl Methacrylate with Bis(Cyclopentadienyl)Titanium Dichloride in a Water-Methanol Mixture: Formation of Tetrahydrofuran-Insoluble Polymer

Abstract

Methyl methacrylate (MMA) was found to be effectively polymerized with bis(cyclopentadienyl)titanium dichloride (CP₂TiCl₂) in a water-methanol mixture (1:1, v/v). The polymerization proceeded heterogeneously because the resulting poly(MMA) was insoluble in the system. The rate (R _p) of the heterogenous polymerization was apparently expressed by R _p = k[Cp₂TiCl₂]²[MMA]^2˙5 (at 40°C). The resulting poly(MMA) was observed to consist of tetrahydrofuran (THF)-soluble and insoluble parts. In contrast with the usual radical poly(MMA), the THF-insoluble part was soluble in benzene, toluene, and chloroform but insoluble in polar solvents such as ethyl acetate, acetone, acetonitrile, dimethylformamide, and dimethylsulfoxide. The polymerization was found to be profoundly accelerated by irradiation with a fluorescent room lamp (15 W). The results of copolymerization of MMA and acrylonitrile indicated that the present polymerization proceeds through a radical mechanism.     

Metal-Containing Initiator Systems. IX. Radical Polymerizations of Vinyl Monomers by Various Metal Acetylacetonates

Abstract

A study of the polymerization of styrene, methyl methacrylate, acrylonitrile, vinyl acetate, and vinyl chloride initiated by various metal acetylacetonates [Me(acac)_x] has been made. It was found that Mn(acac)₃ was the most effective initiator, and Co(acac)₃, Mn(acac)₂, Cu(acac)₂, and Cr(acac)₃ showed moderate activity for the polymerization of methyl methacrylate at 60°C. However, the other, Me(acac)_x, had no effect or served as inhibitors. The addition of some additives such as halogen compounds did not accelerate polymerization of methyl methacrylate by Mn(acac)₃, From the results of polymerization and copolymerization of methyl methacrylate by Mn(acac)₃, it was concluded that the polymerization proceeded via an ordinary radical mechanism and the activation energy for initiation was 25.2 kcal/mole. The initiation mechanism of vinyl polymerization by Me(acac)_x was studied on the basis of the complex formation with the monomer.     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.     

A New Redox Initiating System for the Polymerization of Vinyl Monomers

Abstract

A new redox system, dioxane-ascorbic acid, has been investigated for the homopolymerization of vinyl monomers. Detailed kinetic studies on the aqueous polymerization of acrylamide by this initiating system have been done iodometrically at 35 ± 0.2°C. The effect of various additives, such as organic solvents, inorganic salts, surfactants, etc., on the rate of polymerization has been studied. The retardation constants for organic solvents have been evaluated by the “intercept method.” The overall energy of activation has been found to be 8.75 kcal/deg/mol, within the temperature range 25–45°C. A suitable mechanism has been suggested. The following rate expression: R_p α [acrylamide]^1.0 [dioxane]^1.0 [ascorbic acid]⁰, has been observed.     

Emulsion copolymerization of tetrafluoroethylene and propylene with redox system containing tert-butylperbenzoate. I. Polymerization conditions and components

Emulsion polymerization of tetrafluoroethylene and propylene with ammonium perfluorooctanoate, initiated by a redox system containing tert-butylperbenzoate (TBPB) was carried out. The effect of the components of the redox system Is (TBPB, FeSO₄.7H₂O, ethylenediamine tetraacetic acid (EDTA), and CH₂(OH)SO₂Na.2H₂O) on the polymerization rate (R) and molecular weight () was studied. Among redox system components, Fe²⁺ concentration exerts the most significant effect (by power of 0.54) on the polymerization rate. It was found that R ∝ [Is]^0.2–0.54 and M_n ∝ [Is]^0.0–0.1 and polymerization reaction scheme was suggested for the action of the initiating system. The influence of the copolymerization conditions (pressure, temperature, stirring speed, and pH) is also discussed. The apparent activation energy of the reaction was found to be 46.0 kJ/mol. © 1994 John Wiley & Sons, Inc.     

Polymerization of cyclohexene oxide with Al(acac)3- silanol catalyst

The polymerization of cyclohexene oxide was investigated with a new catalyst system of Al(acac)₃- silanol compounds. Catalyst activity varied with the ratio of silanol/Al(acac)₃ and the structure of silanol compounds. Catalyst deactivation appeared to be caused by self-condensation of silanol and the addition of silanol to the epoxy ring. Polymer structure was investigated by ¹³C-NMR spectroscopy and x-ray diffraction. The mechanism of the polymerization appears to be cationic.