电沉积ZnO纳米棒阵列及共形结构杂化太阳能电池

采用电沉积法制备出ZnO致密纳米颗粒膜和不同尺寸的纳米棒阵列。通过在ZnO上旋涂p型聚合物聚3-己基噻酚(P3HT)与n型富勒烯衍生物[6,6]-苯基-C61丁酸甲酯(PCBM)的混合物,并蒸镀金属Ag,制备出不同结构的杂化太阳能电池。通过扫描电镜、X射线衍射、光致发光和模拟太阳光光电性能测试,对ZnO的生长条件、晶体形貌及缺陷与太阳能电池性能之间的关系进行了系统研究。结果表明,ZnO的形貌和晶体缺陷的分布对杂化太阳能电池有重要影响,避免共混聚合物与ZnO缺陷聚集区的直接接触可有效消除电流泄漏。在电池结构方面,与ZnO纳米阵列块状结构杂化太阳能电池相比,共形结构的杂化太阳能电池可有效缩短空穴到金属电极的传输距离,增大聚合物与金属电极的接触面积,光电转换效率可提升64%~101%。     

P3HT/CdS/TiO2/ZnO一维有序核壳式纳米棒阵列的构制及其在杂化太阳电池中的应用研究

采用恒电位法在铟锡氧化物导电玻璃(ITO)上制备了高度有序一维ZnO纳米棒阵列,将ZnO纳米棒阵列在TiO2溶胶中采用提拉法制备出了一维TiO2/ZnO核壳式纳米棒阵列.在一维TiO2/ZnO核壳式纳米棒阵列上电沉积CdS纳米晶得到一维CdS/TiO2/ZnO核壳式纳米棒阵列,然后在一维CdS/TiO2/ZnO核壳式纳米棒阵列上电沉积聚3-己基噻吩(P3HT)薄膜得到P3HT/CdS/TiO2/ZnO核壳式纳米结构薄膜.以该纳米结构薄膜电极为光阳极制备出新型纳米结构杂化太阳电池,研究了该类电池的光电转换性能,初步探讨了该类电池的工作机理.     

无机纳米晶-共轭聚合物异质结光电池研究进展

无机纳米晶_共轭聚合物固体薄膜太阳能电池是一种以半导体纳米晶作为电子受体、共轭聚合物作为电子给体的新型异质结光电池,近年来已成为国内外研究的热点。本文综述了近几年国际上关于这一领域的研究进展,重点讨论了几种最具潜力的无机半导体纳米晶(CdSe、TiO2、ZnO)共轭聚合物(P3HT、MEHPPV、MDMOPPV)复合太阳能电池,探讨了其光电转化机理并研究了纳米粒子的形貌、共混比例、制备方法和表面改性等对聚合物太阳能电池性能的影响。     

ZnO纳米管有序阵列与Cu_2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析.以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度.结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

Cd基化合物纳米晶-有机聚合物杂化太阳能电池研究进展

有机-无机杂化太阳能电池因其结合了有机材料和无机材料各自的优势而引起了人们的广泛关注和研究. Cd基化合物纳米晶因其具有制备方法简单、尺寸及形貌可控、载流子迁移率高和稳定性好等优点而成为最早被研究的一类无机受体. 本文介绍了有机-无机杂化太阳能电池的结构及原理, 分析了影响有机-无机杂化太阳能电池效率的三个主要因素, 分别是开路电压(V_oc)、短路电流(J_sc)和填充因子(FF). 从改善Cd基化合物纳米晶的合成方法, 增加Cd基化合物纳米晶和有机聚合物间的界面接触, 以及优化Cd基化合物纳米晶和有机聚合物所用溶剂和所占比例等方面阐述了近年来Cd基化合物纳米晶-有机聚合物杂化太阳能电池的研究进展. 并展望了Cd基化合物纳米晶-有机聚合物杂化太阳能电池的发展方向.     

ZnO电极修饰层在钙钛矿太阳能电池中的应用

ZnO电极修饰层具有高电子迁移率、高透光率、可低温制备且环境友好等优点在钙钛矿太阳能电池上获得了广泛应用。本文针对传统电极修饰层需要高温退火、透光率较低、制备过程繁琐,不利于高性能柔性钙钛矿电池器件制备等问题,系统综述了以ZnO材料作为电极修饰层的制备方法,综合分析了ZnO构筑的电极修饰层形貌、厚度、掺杂及复合对钙钛矿太阳能电池性能（如开路电压、电流密度、填充因子、光电转换效率等）的影响,展望了ZnO电极修饰层材料的未来发展趋势与其在钙钛矿太阳能电池中的应用前景。     

ZnO纳米线/棒阵列的水热法制备及应用研究进展

氧化锌(ZnO)纳米线/棒阵列的质量决定了所构建光电器件的性能. 为了制备出比表面积更大、垂直性更好以及无根部融合的高质量ZnO纳米线/棒阵列, 本文概述了近几年两步水热法可控制备ZnO纳米线/棒阵列的研究进展, 分别探讨了种子层、生长液和生长方法对纳米线/棒阵列形貌的影响, 详细分析了氨水、六次甲基四胺和聚乙烯亚胺对于促进纳米线/棒阵列生长的作用机理, 提出了通过微流控技术可控制备ZnO纳米线阵列提高纳米线生长效率的方法. 最后介绍了ZnO纳米线/棒阵列的形貌对于提高染料敏化太阳能电池、纳米发电机、气体传感器和场发射器件性能的重要作用, 并对未来两步水热法制备ZnO纳米线/棒阵列的发展趋势进行了展望.     

有机高分子/无机半导体杂化太阳能电池的发展现状与展望

有机高分子/无机半导体杂化太阳能电池是一类以共轭聚合物和无机半导体材料的复合材料为主要原料制备的太阳能电池。本文详细论述了杂化太阳能电池的工作原理,并根据其工作原理分析了影响杂化太阳能电池效率的影响因素,包括给体材料的选择、异质结形态、光敏层厚度、无机半导体的选择与表面改性及电池的退火处理等,并从各个影响因素的角度对杂化太阳能电池的发展进行了讨论,最后从共轭聚合物的角度对杂化太阳能电池的发展做出了展望,指出想要进一步提高杂化太阳能电池的效率,未来应该在对已知共轭聚合物进行改性或合成新的共轭聚合物上投入更多的精力.     

有机物/硅杂化太阳能电池的研究进展

有机/无机杂化太阳能电池既可以兼容无机材料的高稳定性, 高载流子迁移率和成熟的制备工艺, 又可以利用有机材料分子结构的可塑性, 调节光谱吸收以及光学带隙, 以及简便的溶液制作过程, 具有取得高效率低成本太阳能电池的巨大潜力. 硅和有机物在低温下形成的异质结光伏电池吸引了广泛的研究, 目前最高光电转换效率已经达到13.8%. 而采用硅纳米线等纳米结构之后使在几十微米的低纯硅上制备高效太阳能电池成为可能, 柔性硅基底的杂化太阳能电池效率已经超过12%. 本文首先介绍了硅基杂化太阳能电池的结构、工作机理和使用的有机材料, 按硅的结构分为平面硅基和微纳结构硅基杂化太阳能电池, 重点概述了该类电池最近几年的发展状况, 分析了硅的结构、有机材料和制备工艺对器件性能的影响. 最后对众多研究方法进行了归纳总结, 对存在的问题和解决策略提出了展望.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.