Coupling of thermal desorption in modified closeable sampling columns with wide-bore capillary gas chromatography and mass spectrometric detection

In contrast to usability of Curie-point pyrolysis at 700°C directly attached to gas chromatography-mass spectrometry (GC-MS) for determination of organic wood preservatives in waste wood samples the investigation method reported here consists of thermal desorption at temperatures about 260°C in connection with GC-MS for peak identification or GC with flame ionization detection for quantitative analyses. So-called “modified closeable sampling columns” are used as batch-reactor in thermal desorption experiments. Desorbed vapours can be introduced on capillary columns without sample discrimination and without a disturbing lost of resolution. In this manner a lot of individual polycyclic aromatic hydrocarbons were determinated in waste wood samples, especially in railway sleepers.     

Use of on-line mass spectrometric detection in capillary electrochromatography

Capillary electrochromatography (CEC) is a liquid phase analytical separation technique that is generally carried out with packed capillary columns by electroosmotically driven mobile phase at high electric field strength. The analytes are separated by virtue of the differences in their distribution between the mobile and stationary phases and, if charged in their electrophoretic mobilities as well. It is thus considered a hybrid of liquid chromatography and capillary electrophoresis and is expected to combine the high peak efficiency of capillary zone electrophoresis (CZE) with the versatility and loading capacity of HPLC. This review explores the potential use of on-line mass spectrometric detection for CEC. It discusses key design issues that focus on the physical and electrical arrangement of the CEC column with respect to the electrospray orifice inlet. The salient features of the sheathless, sheath flow and liquid junction interfaces that are frequently employed while coupling a CEC column to an electrospray ionization mass spectrometry system are also highlighted. Possible configurations of the CEC column outlet that would obviate the need for pressurizing the capillary column are also presented. While coupling CEC with MS both the nature of the interface and the configuration of the column outlet will determine the optimal arrangement. The review also discusses bandspreading that occurs when a connecting tube is employed to transfer mobile phase from the column outlet to the atmospheric region of the electrospray source with a concomitant loss in sensitivity. Selected examples that highlight the potential of this technique for a wide range of applications are also presented.     

Investigations on the migration behaviour of purines and pyrimidines in capillary electromigration techniques with UV detection and mass spectrometric detection

Different approaches for the separation of a set of nucleosides and nucleobases using capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) are described. Several electrolyte compositions have been tested for this purpose. The addition of appropriate amounts of borate to the carrier electrolyte allowed manipulating migration orders in CZE and MEKC by selective complexation of the nucleosides. For detection either UV or two different modes of mass spectrometric (MS) detection were employed. The latter approach included a comparison of two ion sources namely electrospray ionization (ESI) and atmospheric pressure photoionization (APPI) with respect to their potential in the detection of the selected compounds. Thereby it could be demonstrated that, in particular when it comes to the analysis of real samples, APPI-MS is the better choice if MS detection of purines and pyrimidines after separation by CZE is required.     

Recent advances in the application of capillary electrophoresis with mass spectrometric detection

This review gives an overview of applications of CE coupled to MS detection published in the literature of the last three years. The works discussed in this paper comprise a wide range of different fields of application. These include important sections such as the analysis of biomolecules, the analysis of pharmaceuticals and their metabolites in different matrices, environmental analysis, and also investigations on the composition of technical products.     

Separation of metalloporphyrins by capillary electrophoresis with UV detection and inductively coupled plasma mass spectrometric detection

Vitamin B12, cobalt protoporphyrin, manganese protoporphyrin, and zinc protoporphyrin were separated using capillary electrophoresis, and a comparison was made between detection with inductively coupled plasma mass spectrometry (ICP-MS) and UV detection. Absolute limits of detection were slightly better with ICP-MS detection than with UV detection, but for both methods absolute detection limits were in the picogram range. The migration times of the analytes decreased by several minutes when ICP MS detection was employed, and this phenomenon was believed to be a result of a "suction effect" that developed when the CE capillary was interfaced to the ICP-MS nebulizer. However, the resolution between species containing the same metal atom was not altered significantly, and the separation was completed in much less time relative to separations performed with UV detection.     

Sample introduction and separation in capillary electrophoresis, and combination with mass spectrometric detection

Capillary-electrophoresis methods are attracting interest owing to the ability to yield rapid high-resolution separations, but many aspects, such as sample injection, separation conditions and detection, need further development. Effects related to sample injection and buffer composition have been investigated. Automated methods for electromigration injection of nl-size sample volumes are shown to give a precision of approximately +/-1%. Problems encountered with manual injection procedures have been examined by an electric field reversal technique. The effect of buffer pH on capillary zone-electrophoresis (CZE) separations can be attributed to changes in electro-osmotic flow velocities and to changes in the isoelectric points of analytes. The interfacing of capillary electrophoresis with mass spectrometry is described and demonstrated for a range of conditions, with a quaternary phosphonium salt mixture. Separations obtained by CZE and capillary isotachophoresis are compared and the relative advantages of the two techniques discussed.     

Determination of bupivacaine and metabolites in rat urine using capillary electrophoresis with mass spectrometric detection

A method using capillary electrophoresis-mass spectrometry (CE-MS) was developed for the structural elucidation of bupivacaine and metabolites in rat urine. Prior to CE-MS analysis, solid-phase extraction (SPE) was used for sample cleanup and preconcentration purposes. Exact mass and tandem mass spectrometric (MS/MS) experiments were performed to obtain structural information about the unknown metabolites. Two instruments with different mass analyzers were used for mass spectrometric detection. A quadrupole time-of-flight (Q-TOF) and a magnetic sector hybrid instrument were coupled to CE and used for the analysis of urine extracts. Hydroxybupivacaine as well as five other isomerically different metabolites were detected including methoxylated bupivacaine.     

Control of dispersion in capillary electrochromatography coupled to UV and mass spectrometric detection

Capillary electrochromatography (CEC), along with other miniaturised chromatography techniques, such as capillary LC, offers the most benefit when efficiently coupled to mass spectrometric (MS) detectors. In conventional one-piece CEC columns, dispersion in the open connecting tube between the packed column and MS source reduces chromatographic performance to unacceptable levels. This paper examines the effect on dispersion of various column-tube arrangements and offers suggestions as to the most practical way of connecting CEC-UV-MS. Comparisons of theoretical and measured values for these different arrangements are shown.     

Determination of free amino acids in infant food by capillary zone electrophoresis with mass spectrometric detection

A method for the quantitative determination of free amino acids in infant food samples using capillary electrophoresis (CE) with electrospray-mass spectrometric (ESI-MS) detection is presented. According to the zwitterionic nature of the analytes, two different modes of separation as well as detection were tested; highly acidic carrier electrolytes combined with MS detection in the positive ion mode proved to be the optimum solution. Sensitivity as well as linearity of the method were sufficient to allow the analysis of all solutes of interest in a single run. In this way, free amino acids could be analyzed in a variety of infant food preparations without any sample pretreatment or derivatization step.     

Determination of hydrazine in biofluids by capillary gas chromatography with nitrogen-sensitive or mass spectrometric detection.

Plasma and liver levels of hydrazine were determined at 10, 30, 90 and 270 min in rats given 0.09, 0.27, 0.84 and 2.53 mmol of hydrazine per kg body weight orally by capillary gas chromatography-mass spectrometry of its pentafluorobenzaldehyde adduct (DFBA, m/z 388) using selected ion monitoring with 15N2-labelled hydrazine as the internal standard (adduct, m/z 390). The mean half-life for hydrazine in the plasma was approximately 2 h but varied with dose. Urinary excretion (0-24 h) of hydrazine and its metabolite acetylhydrazine were determined employing nitrogen-phosphorus detection of the adducts utilising a novel internal standard, pentafluorophenylhydrazine, the adduct of which structurally resembles DFBA. The fraction of the original dose excreted as hydrazine (and acetylhydrazine) declined with increasing dose.     

High performance fourier transform ion cyclotron resonance mass spectrometric detection for capillary electrophoresis

We describe the current state of the on-line combination of capillary electrophoresis (CE) electrospray ionization (ESI) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry (MS), and discuss aspects of the FTICR technique relevant to its use as a detection scheme for on-line separations. Aspects including sensitivity, mass resolution, duty cycle, and tandem mass spectrometric capabilities are discussed in the context of online separations with examples from the authors' laboratory.     

In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.     

Coupling continuous separation techniques to capillary electrophoresis

One of the weak points of capillary electrophoresis is the need to implement rigorously sample pretreatment because its great impact on the quality of the qualitative and quantitative results provided. One of the approaches to solve this problem is through the symbiosis of automatic continuous flow systems (CFSs) and capillary electrophoresis (CE). In this review a systematic approach to CFS-CE coupling is presented and discussed. The design of the corresponding interface depends on three factors, namely: (a) the characteristics of the CFS involved which can be non-chromatographic and chromatographic; (b) the type of CE equipment: laboratory-made or commercially available; and (c) the type of connection which can be in-line (on-capillary), on-line or mixed off/on-line. These are the basic criteria to qualify the hyphenation of CFS (solid-phase extraction, dialysis, gas diffusion, evaporation, direct leaching) with CE described so far and applied to determine a variety of analytes in many different types of samples. A critical discussion allows one to demonstrate that this symbiosis is an important topic in research and development, besides separation and detection, to consolidate CE as a routine analytical tool.     

Determination of phthalates in crude extracts of sewage sludges by high-resolution capillary gas chromatography with mass spectrometric detection

A simple solvent extraction by ethyl acetate without subsequent cleanup was used to determine 16 phthalic acid esters (PAEs), including bis(2-ethylhexyl) phthalate (DEHP), in sewage sludge samples from different catchment areas. The compounds were separated on a gas chromatographic capillary column with a nonpolar HT-8 stationary phase. For most of the PAEs, internal standard quantification with deuterated dibutyl phthalate (DBP) and deuterated DEHP was best achieved by using electron ionization mass spectrometry in the selected-ion monitoring mode. Because of its high concentrations in the sludges, DEHP was quantified in the full-scan acquisition mode. Molecular weight and ester-type information for the PAEs was obtained in the positive chemical ionization mode with methane as the reagent gas. Finally, selected sewage sludges containing different amounts of industrial wastewater were analyzed by the proposed method. DEHP was the most abundant compound found at 21-114 mg/kg x dm, followed by the lower-molecular weight PAEs diethyl phthalate, diisobutyl phthalate, and DBP and the higher-molecular weight compounds butylbenzyl phthalate, dicyclohexyl phthalate, di-n-octyl phthalate, and dinonyl phthalate, which were present mostly at <1 mg/kg x dm.     

Determination of carbohydrates by capillary electrophoresis with electrospray-mass spectrometric detection.

A method for the determination of underivatized carbohydrates using capillary electrophoresis (CE) with detection by electrospray ionization-mass spectrometry (ESI-MS) presented. Highly alkaline carrier electrolytes based on volatile organic bases like is diethylamine (DEA) combined with MS detection in the negativ-ion mode proved to be the optimum solution for the separation and detection of these analytes. Optimization of the carrier electrolyte composition has been performed with respect to its pH, ionic strength as well as the addition of an organic modifier. The influence of the DEA concentration in the sheath liquid on parameters like peak shapes or signal-to-noise (S/N) ratios was also investigated. Limits of detection (LOD) were in the range of 0.5-3.0 mgL(-1) and calibration was linear over an order of magnitude for almost all solutes investigated. Finally, the applicability of this method for the analysis of real samples was demonstrated with wine samples.     

Cationic poly(amidoamine) dendrimers as additives for capillary electroseparation and detection of proteins

We examine the influence of cationic poly(amidoamine) (PAMAM) dendrimers on capillary electroseparation–UV analysis of proteins. PAMAMs adsorbing to the capillary surface suppressed the wall‐adsorption of proteins; meanwhile, PAMAMs added to the buffer exhibited selectivity toward proteins. Presence of 3×10^?4 g/mL PAMAM generation one (G 1.0) in 30 mM phosphate, at pH 2.6, rendered significant enhancement in separation efficiency; the merged peaks of myoglobin and trypsin inhibitor were separated. Moreover, the protein–dendrimer interactions changed the inherent UV absorbance profiles of proteins. UV–Vis study showed that the absorbance of cytochrome C and transferrin increased at the detection wavelength of 214 nm; their detection sensitivity enhanced by 2.44 and 2.01‐folds, respectively, with addition of 5×10^?4 g/mL PAMAM G 1.0.     

Selenium speciation by HPLC with tandem mass spectrometric detection

An HPLC/MS-MS method was developed for the analysis of selenium species. Tandem mass spectrometry (MS-MS) was chosen as a detector to provide structural and molecular information allowing the identification of species, which are not commercially available as standards. A new separation method for selenium species was developed, based on porous graphitic carbon (PGC) as the stationary phase. The applicability of the optimized HPLC/MS-MS system was demonstrated by the analysis of a mixture containing Se-methyl-selenocysteine, selenomethionine, selenocystine, selenoethionine and selenocystamine. All peaks were baseline-resolved and eluted within 16 min. Positive ionization led to higher intensities than negative ionization. Signal suppression tests showed that electrospray ionization (ESI) is a more effective ionization method than atmospheric pressure chemical ionization (APCI) for selenium species in a matrix containing pentafluoropropionic acid, heptafluorobutyric acid or ammonium formate. Comparative experiments with a triple quadrupole mass spectrometer (Quattro LC) and a time-of-flight instrument (Q-Tof-2) showed a 20 fold higher mass resolution of the latter mass spectrometer (m/Am= 5000) and significantly lower intensities for analyte signals as well as background noise compared to the triple quadrupole instrument. MS-MS spectra of the investigated selenium species including characteristic fragmentation patterns are presented.     

Speciation analysis for mercury in gas condensates by capillary gas chromatography with inductively coupled plasma mass spectrometric detection

A method allowing species-selective determination of atomic mercury, non-polar dialkylated mercury compounds,polar monoalkylated species and inorganic mercury complexes in natural gas condensates was developed. Inductively coupled plasma mass spectrometry was employed as a detection method for capillary gas chromatography and compared with microwave induced plasma atomic emission detection for the analysis of hydrocarbon-rich matrices. The method was based on two consecutive injections allowing comprehensive speciation analysis. First a sample aliquot was diluted with toluene and analysed for Hg0 and individual dialkylmercury compounds. Then, another aliquot was butylated with a Grignard reagent for the species specific determination of Hg(II) and monoalkylated mercury species. The detection limits were down to 0.08 pg level.