ZnO@SiO_2同轴纳米电缆的静电纺丝技术制备与表征

采用同轴静电纺丝技术,以硝酸锌、正硅酸乙酯(C8H20O4Si)、无水乙醇、聚乙烯吡咯烷酮(PVP)和N,N-二甲基甲酰胺(DMF)为原料,成功制备出大量的ZnO@SiO2同轴纳米电缆。用TG-DTA,XRD,SEM,TEM,FTIR等分析技术对样品进行了表征。结果表明,得到的ZnO@SiO2同轴纳米电缆的壳层为无定型SiO2,厚度为50nm,芯轴为晶态ZnO,电缆直径为300~450nm,长度大于300μm。探讨了ZnO@SiO2同轴纳米电缆的形成机理。     

纳米石墨薄片/聚吡咯复合材料的制备及导电性能

膨胀石墨经过超声处理制备了纳米石墨薄片。以其为导电填料，对甲苯磺酸为掺杂剂，FeCl₃·6H₂O为氧化剂，引发吡咯单体发生原位聚合，制备出纳米石墨薄片/聚吡咯(NanoGs/PPy)复合材料。利用红外光谱(FTIR)、扫描电镜(SEM)和透射电镜(TEM)表征了材料的组成和结构。结果表明，石墨薄片被聚吡咯完全包覆；并且以纳米级尺寸分散在聚吡咯基体中。热失重(TG)分析和电导率测试结果表明，复合材料的耐热性能和导电性能较纯聚吡咯有所提高。     

同轴静电纺丝技术制备ZnO@CeO2纳米电缆

采用同轴静电纺丝技术,以硝酸铈、硝酸锌、聚乙烯吡咯烷酮、N,N-二甲基甲酰胺、甘油和氯仿为原料,制备了ZnO@CeO2 同轴纳米电缆。用差热–热重分析、X射线衍射、扫描电镜、透射电镜和能谱仪对样品进行了表征。结果表明,所得到的产物为ZnO@CeO2同轴纳米电缆,以晶态CeO2为壳层,晶态ZnO为芯层,电缆直径约90 nm,芯层直径约60 nm,壳层厚度约15 nm,电缆长度>300 μm,对其形成机理进行了分析。     

Ag/C同轴纳米电缆的制备

采用十六烷基三甲基溴化铵(CTAB)辅助水热法合成了Ag/C同轴纳米电缆,并用SEM、TEM、XRD和EDS对产物进行了表征。结果表明,产物为长达数十微米,内核直径80～100 nm,壳厚约100 nm的纳米电缆。初步探讨了Ag/C同轴纳米电缆的生长机制。     

静电纺聚吲哚纳米纤维的制备及其对镉离子的吸附行为

以无水氯化铁为氧化剂,采用化学氧化还原法合成了聚吲哚,利用静电纺丝技术制备了聚吲哚导电纳米纤维材料,研究了聚吲哚纳米纤维对重金属Cd2+的吸附行为.FTIR和NMR测试结果表明,化学氧化还原过程中吲哚的聚合是发生在吲哚单体的C2、C3位置.SEM和TEM观察表明,聚吲哚纳米纤维表面较光滑,呈圆柱状、没有珠节;纤维无规分布,平均直径约为145 nm;聚吲哚纳米纤维的比表面积非常高,达73.45 m2/g,其对重金属Cd2+具有良好的吸附能力,在p H=6时其对Cd2+平衡吸附量最大,约为140.36 mg/g,平衡吸附时间约为50 min.热力学分析表明聚吲哚纳米纤维对Cd2+的吸附行为用Freundlich模型描述更合理,动力学分析表明聚吲哚纳米纤维对Cd2+的吸附比较符合准二级动力学模型.再生10次后,其吸附量为100.67mg/g,是最大值的71%,是一种潜在的重金属Cd2+高效吸附材料.     

聚吡咯纳米颗粒的静态法合成及表征

在无模板、无表面活性剂条件下,采用静态化学氧化聚合法合成了高聚合产率(93%)聚吡咯纳米颗粒.以红外光谱、广角X射线衍射、四探针仪、扫描电子电镜和透射电子显微镜对聚吡咯的结构、电性能和形貌进行了表征.并研究了搅拌条件、氧化剂种类、过硫酸铵/吡咯摩尔比、聚合反应温度和反应介质对聚吡咯纳米颗粒的粒径、形貌的影响.结果发现,聚吡咯纳米颗粒的尺寸随聚合反应条件的变化而改变.在静态条件下,以过硫酸铵为氧化剂、过硫酸铵/吡咯摩尔比为0.25,于0℃冰水浴中有利于获得聚吡咯纳米颗粒.透射电子显微镜的结果表明以过硫酸铵/吡咯摩尔比为0.25,于0℃下1.0mol/LHCl水溶液介质中可以聚合得到直径为43nm、颗粒大小均匀的球形聚吡咯纳米颗粒.盐酸掺杂聚吡咯纳米颗粒的室温电导率可达5.5S/cm.     

亚硝基聚吡咯修饰离子选择性电极的制备及化学性能

用循环伏安法（ＣＶ）制备了聚吡咯亚硝酸根离子选择性电极。表征了电极的性能。在１０－１～５×１０－５ｍｏｌ／Ｌ浓度范围内电极电位与亚硝酸根离子浓度成良好的线性关系，斜率５１ｍＶ／ＰＮＯ－２。观察了ＮＯ－２在ＰＰｙ膜中掺杂－去掺杂过程，从而验证了电极响应是基于掺杂机理。     

聚吡咯纳米球负载金纳米粒子的制备及其性能研究

在水溶液中以表面活性剂F127形成的胶束为模板制备聚吡咯纳米球，考察了温度、吡咯浓度、pH等因素对聚吡咯纳米球形貌的影响，提出F127体系中聚吡咯纳米球的形成机理。利用聚吡咯与氯金酸之间的氧化还原活性，在聚吡咯纳米球表面成功负载金纳米粒子，研究温度和吡咯浓度对聚吡咯/金复合材料形貌的影响，运用透射电子显微镜、傅里叶红外光谱、X射线衍射、拉曼光谱、循环伏安等对其形貌、结构、性能进行研究。结果表明，所制得的负载金纳米粒子的聚吡咯复合材料具有明显的拉曼增强效应，可用于分析复合材料中聚合物的分子结构；此外该复合材料在酸性条件下具有较好的电化学稳定性，可应用于修饰电极。     

聚吡咯纳米阵列电极的光电化学

以多孔的铝阳极氧化膜(AAO)为模板制备了直径约为80 nm聚吡咯(PPy)纳米线的阵列电极, 并研究了它的光电化学响应. 结果表明, 在电极电位低于－0.1 V(vs Ag/AgCl)时出现的阴极光电流是由聚吡咯纳米线的p型半导体性质引起的, 其平带电位为－0.217 V. 聚吡咯纳米线的长度对光电流的影响较大, 最佳长度为42 nm. 这是因为在很短的聚吡咯纳米线阵列中PPy太少, 产生的光电流弱, 而在过长的聚吡咯纳米线阵列中光生电子在到达电极基底前易于与光生空穴复合而消失. 聚吡咯纳米线有可能作为纳米光电器件用于未来微器件系统.     

聚吡咯/尼龙6纳米纤维膜对Pb2+固相萃取的吸附效能研究

以电纺尼龙6纳米纤维膜为基底,原位氧化聚合制得聚吡咯/尼龙6纳米纤维膜(PPy/Nylon 6-NFsM).通过静态和动态吸附实验考察PPy/Nylon 6-NFsM对Pb2+的吸附行为,探究其作为固相萃取介质富集水中痕量Pb2+的可行性.结果表明:298 K,pH=10时,PPy/Nylon 6-NFsM对Pb2+的静态饱和吸附量达542 mg/g;吸附动力学和吸附等温线分别符合准二级动力学模型和Freundlich模型;优化了PPy/Nylon 6-NF-sM的固相萃取条件,采用火焰原子吸收光谱法检测实际水样中的Pb2+,检出限为1.2 μg/L(信噪比为3计),10 μg/L加标水平加标回收率为95.3％ ～ 100.4％,相对标准偏差(RSD)为1.6％(n=3),可实现实际水样中痕量Pb2+的准确、灵敏的检测.     

MWCNT@SiO_2纳米同轴电缆的制备及储锂性能

以多壁碳纳米管(MWCNT)为模板,通过正硅酸乙酯(TEOS)的水解缩聚反应制得MWCNT@SiO2纳米同轴电缆.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)和电化学测试对样品的形貌、结构及电化学性能进行表征.结果表明,MWCNT表面包覆了一层厚度均匀的多孔SiO2层,利于其获得较好的储锂性能.作为锂离子电池负极材料,MWCNT@SiO2纳米同轴电缆表现出了较高的比容量和较好的循环性能.在100 m A/g电流密度下经过80次循环,MWCNT@SiO2纳米同轴电缆的放电比容量仍高达431.7 m A·h/g,高于石墨材料的理论比容量(372 m A·h/g).     

Template Synthesis and Characterization of Cu2O/TiO2 Coaxial Nanocable for Photocatalysis

Coaxial nanocable consisted of p-type Cu₂O nanowires and n-type TiO₂ nanotubes arrays was prepared in the porous anodic aluminum oxide(AAO) template via the sol-gel method and subsequent electrodeposition method. X-ray diffraction analysis identified an anatase structure of the TiO₂ nanotubes and cubic structure of the Cu₂O nanowires. The obtained samples were also characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM) and energy dispersive X-ray spectroscopy(EDS). The diffrence of open circuit potential of the coaxial nanocable electrode was larger than that of the TiO₂ nanotubes electrode under ultraviolet illumination, which means doping with Cu₂O could improve the photovoltage effectively. Meanwhile, nanocable arrays exhibited a high activity for photodegrading Rhodamine B under Xe lamp irradiation and the photocatalysis degradation efficiency was up to 98.69% after degradation for 7 h. The enhanced photocatalytic activity could be attributed to the high migration efficiency of photoinduced electrons, which may suppress the charge recombination effectively.     

磷钼酸掺杂的聚吡咯薄膜电极的表征

对离子在导电聚合物修饰电极中起着很重要的作用．因止匕自从导电聚合物薄膜修饰电极的研究开始以来，A们尝试了在导电聚合物膜中掺杂各种各样的离子［‘一句，以使导电聚合物膜向功能化方向发展．在这些众多的掺杂离子中，人们无感兴趣的是将那些电活性阴离子作对离子掺杂人导电聚合物膜中，如时C叫6【‘，司、杂多酸根离子”河等·将电活性阴离子作为对离子掺杂人导电聚合物膜修饰电极中，有助于人们对这种修饰电极的研究，因为这些对离子可以作为一种探针来检测对离子在腰中的传输情况．杂多酸掺杂的导电聚合物电极还具有电催化性能，对…     

Adsorption of bromide at the Ag(100) electrode surface

The adsorption and phase formation of bromide on Ag(100) has been studied by chronocoulometry and surface X-ray scattering (SXS). With increasing electrode potential, bromide undergoes a phase transition from a lattice gas to an ordered c(2×2) structure (θ=0.5). The degree of lateral disorder was estimated by comparing the SXS- and the electrochemical measurements. Based on chronocoulometric experiments, a thermodynamic analysis of charge density data was performed to describe the bromide adsorption at the Ag(100) electrode. The Gibbs surfaces excess, electrosorption valencies, Esin–Markov coefficients, and the Gibbs energy of adsorption, lateral interaction energies as well as surface dipole moments have been estimated. The experimental θ versus E- isotherms are modeled employing (i) a quasi-chemical approximation as well as (ii) the results of a recent Monte Carlo simulation. An attempt is made to discuss the structure data and thermodynamic quantities of bromide adsorption on Ag(100) on the basis of the Grahame–Parsons model of the Helmholtz layer.     

Synthesis and Characterization of New Chelating Resin: Adsorption Study of Copper(II) and Chromium (III) Ions

Acrylamide based monomer, 5-methyl-2-thiozyl methacrylamide (MTMAAm) was synthesized by the reaction of 2-Amino-5-methyl thiazole with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The monomer MTMAAm was characterized by FT-IR and ¹H-and ¹³C-NMR spectral studies. A new chelating resin, poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] was synthesized. This resin was characterized by FT-IR. In order to determine the adsorption behavior of chelating resin, the adsorption isotherm of Cr(III) and Cu(II) were studied. It was found that the adsorption isotherm of the ions fitted with Langmuir-type isotherms. From the Langmuir equation, the adsorption capacity of chelating resin for Cr(III) and Cu(II) was found to be 7.77 mg g^{? 1} and 4.27 mg g^{? 1}, respectively. Binding equilibrium constant was calculated to be 0.155 L mg^{? 1} and 0.106 L mg^{? 1} for Cu(II) and Cr(III), respectively.     

氨基修饰的金属有机框架Cu_3(BTC)_2的制备及其CO_2吸附性能研究

首先制备了嫁接氨基的均苯三甲酸,同时以其为原料通过溶剂热法合成了金属有机框架材料Cu_3(NH_2BTC)_2,利用XRD、N_2吸附-脱附、热重、红外、原位红外分析等表征手段对吸附剂进行了表征,并通过固定床测量穿透曲线的方法研究其CO_2吸附性能。结果表明,氨基被成功引入Cu_3(BTC)_2骨架中。氨基修饰的Cu_3(BTC)_2对CO_2有着较高的吸附容量,在10 kPa,50℃的条件下CO_2吸附量为1.41 mmol/g,这源于材料对于CO_2同时存在着物理吸附和化学吸附。     

聚吡咯/铁酸镍纳米复合材料制备和应用研究

以FeCl_3为氧化剂和掺杂剂经原位氧化聚合制备了聚吡咯/铁酸镍纳米复合材料,用以吸附处理废液中高浓度的铬(Ⅵ)。分别采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和振动样品磁强计(VSM)对产物的结构、形貌与磁性能进行了表征。结果表明,复合吸附材料由20~30nm大小的NiFe_2O_4多晶球簇内核及外层聚吡咯包覆而成,其饱和磁化强度为7.89emu/g。对含铬(Ⅵ)污水吸附研究表明,该吸附剂在60min内即可达到吸附平衡,吸附效果优异,同时考察了NiFe_2O_4掺杂比例、吸附时间、pH、铬(Ⅵ)初始浓度对吸附效果的影响。在pH=5的条件下,聚吡咯/铁酸镍复合材料在30min内对铬(Ⅵ)的最大吸附量为49.81mg/g。     

功能化有序介孔碳对重金属离子Cu(II)、Cr(VI)的选择性吸附行为

以三嵌段共聚物F127为模板剂, 酚醛树脂为碳源, 正硅酸乙酯为硅源, 三组分共组装合成介孔碳?氧化 硅纳米复合物, 再经HF去除氧化硅, 得到有序介孔碳(OMC). X射线衍射(XRD)、透射电子显微镜(TEM)、低温 N2吸脱附(BET)等测试表明, 所得样品具有高度有序的介孔结构, 比表面积和孔容分别为1330 m²·g^-1和2.13 cm³·g^-1, 平均孔径6.4 nm. 对其先氧化、后氯化、再胺化, 得到不同胺基接枝量的胺化介孔碳(C-NH₂(m), m为加入的乙二胺的质量(g)). 傅里叶变换红外(FT-IR)光谱表征结果证实, 胺基官能团成功接枝到有序介孔碳表面.TEM测试表明介孔碳的有序孔道结构得到了较好的保持. 以有序介孔碳、胺化介孔碳作吸附剂对Cu(II)、Cr(VI)进行选择性吸附研究. 结果表明: 功能化修饰前, 样品对Cu(II)、Cr(VI)饱和吸附量分别为213.33、241.55 mg·g^-1; 修饰后饱和吸附量可分别达到495.05、68.21 mg·g^-1. 功能化介孔碳表现了较强的选择性吸附Cu(II)的能力.     

Adsorption and Diffusion of O Atoms on Ag（210） Stepped Surface

The O-Ag(210)surface adsorption system was studied via the five-parameter Morse potential theory.Meanwhile,the 2O-Ag(210)system was investigated via the extended London-Eyring-Polanyi-Sato(LEPS)potential theory to learn the interaction between the adsorption states.Calculated results demonstrate that there are two stable on-surface adsorption sites(B and H)for O atoms on Ag(210)stepped surface.And the perpendicular vibrations are 30.3 and 42.9 meV,which are close to that observed in high resolution electron energy loss spectroscopy(HREELS).Also,there exists an octahedral subsurface adsorption state with a high vibrational frequency,and the interaction between the on-surface and subsurface O species is slight.The mode at 54.6 meV,which is close to that observed in HREELS(54-56 meV),is because of the vibration of the O atom on B site under the influence of that on H site.     

Density Functional Theory Study on the Adsorption of HCNH and CNH2 on Cu（100） Surface

The HCNH and CNH2 adsorption on different coordination sites of Cu（100） was theoretically studied considering the cluster approach. The present calculations show that the bridge site is the most favorite for CNH2 perpendicularly adsorbed on the Cu（100） surface via the C atom. For HCNH absorbed on the Cu（100） surface, the parallel adsorption mode with the C and N atoms nearly directly above the adjacent top sites of Cu（100） surface is the most favored. Both CNH2 and HCNH are strongly bound to the Cu（100） surface with CNH2 which is lightly stable （2.51 kJ·mol^-1）, indicating that both species may be co-adsorbed on the Cu（100） surface.