聚多巴胺表面修饰毛细管电色谱的研究进展

毛细管电泳（CE）具有分离时间短、分离效率高、样品消耗量低等优点,在分离分析领域有着重要应用。原始的未修饰熔融石英毛细管只能提供阴极流向的电渗流和单一的电泳分离机制,分离性能有限,重复性较差,不能满足各类复杂样品体系尤其是中性和手性样品的分离需求。因此,有必要在CE中引入各类毛细管修饰策略,以拓展其实际应用潜力。贻贝仿生聚多巴胺（PDA）及其衍生材料因其简便易行的制备过程、优异的表面黏附性、良好的生物相容性、较强的二次反应活性和化学稳定性等优点,在催化、传感、水处理、样品前处理、生物医药以及CE分离等领域得到了广泛应用。PDA涂层的制备过程与物理吸附涂层一样简便,而表面黏附涂层的稳定性又可与共价键合涂层相媲美,因此非常适用于石英毛细管柱的修饰。更重要的是,PDA涂层较强的二次反应活性使其可作为反应平台进行灵活多样的二次表面修饰,便于构建多功能PDA涂层毛细管电色谱（CEC）固定相。基于这些突出优点,PDA涂层材料在CEC中的巨大应用价值逐渐得到了研究者们的广泛关注。该文首先对近3年有关PDA形成机理及PDA快速沉积表面化学的最新研究进展进行了总结,在此基础上综述了近10年PDA涂层材料在开管毛细管电色谱（OT-CEC）和毛细管电色谱整体柱中的最新应用。此外,还对PDA涂层材料在CEC中的发展方向进行了展望。     

Development and evaluation of a GC/FID method for the analysis of free amino acids in quince fruit and jam.

A GC/FID methodology for determination of twenty-one free amino acids in quince fruit (pulp and peel) and jam is described. The sample preparation was simple, involving a SCX Solid-Phase Extraction (SPE) purification step and a fast derivatization with ethyl chloroformate for gas chromatographic analysis. The chromatographic separation was achieved using a CP-Sil 19 CB wcot fused-silica capillary column. Under the chosen conditions, with temperature and pressure programming, this capillary column was able to separate all the amino acids not only in a short time but also with good separation. The GC/FID procedure is rapid, sensitive, reproducible and accurate. The detection limit values for amino acids were low, between 0.004 and 0.115 microg/mL, and the method was precise. As a general rule, the recovery values were high. Due to its rapidity and low cost, this technique can be useful in the quality control of quince products.     

硅藻土载负葫芦[7]脲气相色谱固定相的制备及其性能评价

在酸性条件下,将自制的葫芦[7]脲均匀地涂覆到102白色硅藻土担体上,制得葫芦[7]脲气相色谱固定相。 采用红外光谱、质谱、元素分析和热重分析表征了葫芦[7]脲在载体表面的结构。 利用相关探针测定了新固定相的麦氏常数,表征了其基本色谱性能。 考察了葫芦[7]脲气相色谱固定相填充柱对芳香烃、卤代烃、醇、酮、酯及硅氧烷的分离能力。 结果表明,葫芦[7]脲固定相热稳定性高,柱色谱性能稳定,对较广泛的化合物尤其对高沸点的酯类及硅氧烷类化合物显示出良好的色谱分离能力(7 min内分离),作为气相色谱固定相有较好的应用前景。 初步讨论了葫芦[7]脲固定相对上述化合物的分离机理。     

Evaluation of solid-phase microextraction desorption parameters for fast GC analysis of cocaine in coca leaves

By its simplicity and rapidity, solid-phase microextraction (SPME) appears as an interesting alternative for sample introduction in fast gas chromatography (fast GC). This combination depends on numerous parameters affecting the desorption step (i.e., the release of compounds from the SPME fiber coating to the GC column). In this study, different liner diameters, injection temperatures, and gas flow rates are evaluated to accelerate the thermal desorption process in the injection port. This process is followed with real-time direct coupling a split/splitless injector to a mass spectrometer by means of a short capillary. It is shown that an effective, quantitative, and rapid transfer of cocaine (COC) and cocaethylene (CE) is performed with a 0.75-mm i.d. liner, at 280 degrees C and 4 mL/min gas flow rate. The 7-microm polydimethylsiloxane (PDMS) coating is selected for combination with fast GC because the 100-microm PDMS fiber presents some limitations caused by fiber bleeding. Finally, the developed SPME-fast GC method is applied to perform in less than 5 min, the quantitation of COC extracted from coca leaves by focused microwave-assisted extraction. An amount of 7.6 +/- 0.5 mg of COC per gram of dry mass is found, which is in good agreement with previously published results.     

基于微机电子系统技术高性能气相色谱柱的制备

基于微机电系统(Micro-electro-mechanical systems,MEMS)技术,制作了微型气相色谱柱,并对其性能进行了研究。与传统色谱柱相比,此微型色谱柱具有体积小,分析速度快等特点,适用于在线检测分析与监测。本研究利用深刻蚀技术与动态涂覆固定相的方法,设计制作了0.5,1.0及3.0 m色谱柱,实现了对苯,甲苯和邻二甲苯的分离。其中,3.0 m色谱柱对甲苯和邻二甲苯的分离度达14.3,理论板塔数达6160,分离时间少于200 s。考察了柱长对色谱柱分离性能的影响。此微型色谱柱可广泛应用于家居安全,瓦斯监测以及环境检测等领域。     

Short metal capillary columns packed with polymer-coated fibrous materials in high-temperature gas chromatography

The high-temperature gas chromatographic (GC) separation of several semivolatile compounds is studied with a short metal capillary column packed with fibrous material, having a polydimethylsiloxane coating thereon. Taking advantage of the excellent heat-resistance of the fiber and also the combination of the surface-deactivated metal capillary, a temperature-programmed separation up to 450 degrees C is successfully demonstrated for the separation of polymer standard samples. The average molecular weight of the commercially-available polymer standard samples for size exclusion chromatography (SEC) is estimated by high-temperature GC analysis and compared with the nominal value determined by a conventional SEC method. Although a slight deviation for the number-average molecular weight is observed between the GC and SEC analysis, the data for the weight-average molecular weight shows a good agreement in these methods. The results also suggest the future possibility of the fiber-packed metal capillary as a miniaturized GC column with an increased sample loading capacity.     

Development of a rapid method for the detection of cocoa butter equivalents in mixtures with cocoa butter

A simple and rapid gas chromatographic (GC) method was developed for the detection of cocoa butter equivalents (CBEs) in cocoa buffer (CB). It is based on the use of a 5 m nonpolar capillary column for the separation of the main triglycerides of CB according to their acyl/carbon numbers. The GC procedure was optimized to avoid thermal degradation of the triglycerides. By computing the ratio C54/C50 and (C54/C50) x C52 and by 2-dimensional plotting of these values, authentic CB samples were clearly distinguished from samples containing various CBEs. The detection of little as 1% CBE in CB (corresponding to about 0.3% CBE in chocolate) in a model system was shown to be possible. Under real conditions, for a wide range of CBs, about 2.5% CBEs in CB were detected. With this method, quantitation was possible at a concentration of 5% CBEs in CB mixtures, which corresponds to around 1% in chocolate; this value is far below the maximum level of 5% CBEs allowed to be added to chocolate.     

Fast analysis of nicotine related alkaloids in tobacco and cigarette smoke by megabore capillary gas chromatography

A novel fast megabore capillary gas chromatographic (MCGC) method for analysis of 7 nicotine related alkaloids in tobacco and cigarette smoke, including nicotine, nornicotine, myosmine, nicotyrine, anabasine, anatabine and 2,3-dipyridyl, was developed. The use of megabore capillary column GC methodology, equipped with flame ionization detector (FID), provided rapid, unambiguous nicotine related alkaloids analysis. One gram flue-cured tobacco (or Cambridge filter pad), 20 ml ether, and 5 ml 10% sodium hydroxide solution, added with n-heptadecane as the internal standard, were placed in a flask, and the flask was capped and placed in an ultrasonic bath for 15 min. A 1 microl volume was analyzed by capillary GC operating in split-injection mode on a mega bore Simplicity-5 column. This simple procedure was compared with the previously reported packed column GC method and the Griffith still-colorimetric method. The application of the method for analysis of various flue-cured tobaccos and cigarette smoke was discussed.     

Determination of residual solvents in bulk pharmaceuticals by thermal desorption/gas chromatography/mass spectrometry

Thermal desorption (TD) techniques followed by capillary GC/MS were applied for the analysis of residual solvents in bulk pharmaceuticals. Solvents desorbed from samples by heating were cryofocused at the head of a capillary column prior to GC/MS analysis. This method requires a very small amount of sample and no sample pretreatment. Desorption temperature was set at the point about 20 degrees C higher than the melting point of each sample individually. The relative standard deviations of this method tested by performing six consecutive analyses of 8 different samples were 1.1 to 3.1%, and analytical results of residual solvents were in agreement with those obtained by direct injection of N,N-dimethylformamide solution of the samples into the GC. This novel TD/GC/MS method was demonstrated to be very useful for the identification and quantification of residual solvents in bulk pharmaceuticals.     

Single-walled carbon nanotubes for improved enantioseparations on a chiral ionic liquid stationary phase in GC

In order to investigate whether the use of single-walled carbon nanotubes can improve enantioseparations on an ionic liquid stationary phase, a chiral ionic liquid, (R)-N,N,N-trimethyl-2-aminobutanol-bis(trifluoromethanesulfon)imidate, was synthesized. Two capillary columns, one containing the chiral ionic liquid and the other containing the single-walled carbon nanotubes and the chiral ionic liquid, were then prepared for GC. The results of the separations achieved with these columns show that coating the chiral ionic liquid stationary phase onto the capillary column containing single-walled carbon nanotubes improves the enantioselectivety of the chiral ionic liquid. This work indicates that using single-walled carbon nanotubes in this manner enables the application range of such GC chiral separations to be extended.     

Simultaneous Capillary Gas Chromatographic Determination of Cyproterone Acetate and 15β-Hydroxycyproterone Acetate in Urine

Abstract

The simultaneous capillary GC determination of underivatized antiandrogen cyproterone acetate (CPA) and its active metabolite 15β-hydroxycyproterone acetate (OH-CPA) in spiked urine was performed on a flexible VCOT quartz capillary column, coated with a non-polar CP-Sil 5 CB liquid phase. A split/splitless injector and a flame-ionization detector were used. Equilin was used as an internal standard, and resolution of all the compounds was achieved in 6 minutes. Limit of detection was 0.04 μg/μl of injected amount for both CPA and OH-CPA, the recoveries were between 91.35% and 105.56%, and the relative standard deviation varied from 3.35% to 7.38%. The method is applicable in analysis of these steroids in biological fluids.     

Enantioselective determination of the organochlorine pesticide bromocyclen in spiked fish tissue using solid-phase microextraction coupled to gas chromatography with ECD and ICP-MS detection

A method for enantioselective determination of bromocyclen enantiomers in fish tissue has been developed. The enantiomers were resolved by capillary gas chromatography (GC) using a commercial chiral column (CP-Chirasil-Dex CB) and a temperature program from 50 degrees C (held for 1 min), raised to 140 degrees C at 40 degrees C min(-1) and then raised at 0.2 degrees C min(-1) to 155 degrees C. This enantioselective gas chromatographic separation was combined with a clean-up/enrichment procedure based on solid-phase microextraction (SPME). Under SPME optimized conditions, precision, linearity range and detection limits of the developed SPME-enantioselective GC procedure were evaluated and compared using two different detection systems: a classical electron-capture detection (ECD) and an element specific detection using inductively coupled plasma mass spectrometry (ICP-MS). The SPME-GC-ECD method exhibited an excellent sensitivity, with detection limits of 0.2 ng L(-1) for each enantiomer of bromocyclen. Although ICP-MS offered poorer detection limits (7 ng L(-1) as Br, equivalent to 36 ng L(-1) of each enantiomer) than conventional ECD detector, it proved to be clearly superior in terms of selectivity. The relative potential and performance of the two compared methods for real-life analysis has been illustrated by the determination of enantiomers of bromocyclen in spiked tissue extracts of trout.     

In-situ and one-step preparation of protein film in capillary column for open tubular capillary electrochromatography enantioseparation

In this wo rk,the phase-transitioned BSA(PTB) film using the mild and fast fabrication process adhered to the capillary inner wall uniformly,and the fabricated PTB film-coated capillary column was applied to realize open tubular capillary electrochromatography(OT-CEC) enantioseparation.The enantioseparation ability of PTB film-coated capillary was evaluated with eight pairs of chiral analytes including drugs and neurotransmitters,all achieving good resolution and symmetrical peak shape.For three consecutive runs,the relative standard deviations(RSD) of migration time for intra-day,inter-day,and column-tocolumn repeatability were in the range of 0.3%-3.5%,0.2%-4.9% and 2.1%-7.7%,respectively.Moreover,the PTB film-coated capillary column ran continuously over 300 times with high separation efficiency.Therefore,the coating method based on BSA self-assembly supramolecular film can be extended to the preparation of other proteinaceous capillary columns.     

烟用香精的气相色谱法质量控制研究

采用配有氢焰检测器或催燃检测器的气相色谱仪,对烟用香精进行了快速分析。方法操作简便,结果可靠,可作为烟用香精原料、产品质量监控的有效手段。     

Candidate EPA, NIOSH method for determining carbon disulfide in air with capillary gas chromatography by orthogonal design

This paper describes a candidate NIOSH EPA method for the determination of carbon disulfide in the air of workplaces with capillary gas chromatography using an orthogonal design. This method is designed to replace the packed column of the NIOSH method with a capillary column. The first part of this work concerned the setup of the method, particularly the choice of chromatographic parameters and finding their main favorable working ranges. The second part, using the statistical method orthogonal design, focused on optimizing the GC conditions, which were: column temperature, T(c) = 90 degrees C; injector temperature, T(i) = 140 degrees C; U section detector temperature, FPDU = 160 degrees C; L section detector temperature, FPDL = 210 degrees C; flow rate of carrier gas, F(c) = 20 cm/s; split ratio = 1/70; and injection volume = 1 microL. The quality control test showed that the coefficient of intra-day variation (CV) was 2.21%. A good logarithm linear correlation between the standard solutions and their peak areas was obtained. In general, the method reported here seems a valid candidate for a NIOSH EPA method due to its high precision and accuracy.     

Capillary gas-chromatographic determination of spermidine in hair lotion

Biogenic polyamines, such as spermidine (SPD, NH2-(CH2)4-NH-(CH2)3-NH2), are ubiquitous polycationic molecules which play a definitive role in many biological processes such as nucleic acid metabolism, protein synthesis, and cell growth. SPD is commonly used as an ingredient in hair lotions, because it seems to promote hair growth. This work describes a capillary GC method for quantitative determination of SPD in hair lotions using 1,6-diaminohexane as internal standard, a methyl silicone capillary column, and a flame ionisation detector. Aliquots of hair lotion were treated with an alkaline aqueous solution and internal standard was added. The emulsion was extracted with diethyl ether containing ethyl chloroformate. Ether extracts, evaporated to dryness and reconstituted in ethyl acetate, were analysed by capillary GC with flame ionisation detection. Validation took into account the specificity, linearity, precision, and accuracy of the analytical method: these parameters were valid for the quantitative determination of SPD in hair lotion.     

β-Cyclodextrin covalent organic framework supported by polydopamine as stationary phases for electrochromatographic enantioseparation

In this work, a new open-tubular capillary electrochromatography (OT-CEC) column was prepared using β-cyclodextrin covalent organic framework (β-CD COF) as a stationary phase. Polydopamine was used to assist fabrication of β-CD COF on an inner wall of a fused-silica capillary. The coating layer on the capillary was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Electroosmotic flow (EOF) was also studied to evaluate the variation of the inner wall of immobilized columns. Furthermore, the chiral separation effectiveness of the fabricated capillary column was evaluated by CEC using enantiomers of several related proton pump inhibitors as model analytes, including omeprazole, lansoprazole, pantoprazole and tenatoprazole. The effects of bonding time and concentration of β-CD COF, the type, concentration and pH of buffer, applied voltage were investigated to obtain satisfactory enantioselectivity. In the optimum conditions, the enantiomers of four analytes were resolved within 15 min with resolutions of 1.63–2.62. The relative standard deviation values for migration times and resolutions of the analytes representing intraday and interday were less than 6.75% and 4.24%, respectively. The results reveal that β-CD COF has great potential as chiral-stationary phases for enantioseparation in CEC.     

Surface hydrophobization of cotton via laccase-mediated polydopamine deposition and dodecyl gallate grafting

Natural fibers containing components with phenolic hydroxyl groups, such as jute, wool, and silk, can be directly modified by laccase-catalyzed grafting. However, cellulosic fibers like cotton cannot be functionalized in this manner. In this work, we developed a facile two-step method to graft polymers on cotton fabric via laccase catalysis. First, polydopamine (PDA) coating was deposited on the surface of the cotton fabrics via catalysis of laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) system. Then, the newly formed PDA coating acted as the secondary reaction platform for subsequent laccase-mediated grafting of hydrophobic monomer dodecyl gallate (DG). The oxidation of dopamine (DA) catalyzed with the laccase/TEMPO system was investigated using UV–visible (UV–vis) spectroscopy. The scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) results verified that the PDA was coated on the surface of cotton fibers. Fourier transform infrared (FTIR) spectra indicated that the PDA-coated cotton was successfully grafted with DG (DG-PDA-cotton). According to the weighting method, the grafting percentage was about 1.06%. The hydrophobicity of the DG-PDA-cotton fabrics was greatly improved with a contact angle of 133°. Also, the grafted cotton fabrics show repellency of water-soluble stains like coffee, milk, and tea. This study provides a new strategy for surface modification of cotton by laccase-mediated grafting, which offers the references for the green fabrication of cotton fabrics with improved functionalization.     

Determination of residual solvents in pharmaceuticals by thermal desorption-GC/MS.

A novel method for the determination of residual solvents in pharmaceuticals by thermal desorption (TD)-GC/MS has been established. A programmed temperature pyrolyzer (double shot pyrolyzer) is applied for the TD. This method does not require any sample pretreatment and allows very small amounts of the sample. Directly desorbed solvents from intact pharmaceuticals (ca. 1 mg) in the desorption cup (5 mm x 3.8 mm i.d.) were cryofocused at the head of a capillary column prior to a GC/MS analysis. The desorption temperature was set at a point about 20 degrees C higher than the melting point of each sample individually, and held for 3 min. The analytical results using 7 different pharmaceuticals were in agreement with those obtained by direct injection (DI) of the solution, followed by USP XXIII. This proposed TD-GC/MS method was demonstrated to be very useful for the identification and quantification of residual solvents. Furthermore, this method was simple, allowed rapid analysis and gave good repeatability.     

Microextraction of volatile organic compounds using the inside needle capillary adsorption trap (INCAT) device

A novel method of solventless extraction has been developed based on a combination of solid phase micro extraction and purge and trap methods. In this technique, a hollow needle with either a short length of GC capillary column placed inside it, or an internal coating of carbon, is used as the preconcentration device. Sampling may be performed on ambient air, on solution, or the solution headspace, by passing the gas or liquid through the device either actively with a syringe, or passively via diffusion. The VOC are sorbed and concentrated onto either the carbon layer, or the liquid stationary phase of the capillary column, within the needle. Placing the needle into a heated GC injection port thermally desorbs the organic compounds directly into the GC without the need for solvent extraction. Results suggest that this procedure provides a rapid and sensitive alternative method to those currently available.