蓝光钙钛矿发光二极管:机遇与挑战

金属卤化钙钛矿由于具有优异的光电性能(如:高电子/空穴迁移率,高荧光量子产率,高色纯度,以及光色可调性等),成为应用于发光二极管(LED)的理想材料。近年来,钙钛矿LED的发展十分迅速,红光和绿光钙钛矿LED的外量子效率(EQE)均已超过20%。然而,蓝光(尤其是深蓝光)钙钛矿LED的EQE以及稳定性依然相对落后,这严重制约了钙钛矿LED在高性能、广色域显示领域和高显色指数白光照明领域的应用。因此,总结现阶段蓝光钙钛矿LED的发展,并剖析其机遇与挑战,对未来蓝光甚至整个钙钛矿LED领域的发展至关重要。本文将蓝光钙钛矿LED根据光色细分为天蓝光、纯蓝光、深蓝光三大部分进行总结,回顾了三种LED器件的发展历程,并详细阐述了现阶段实现他们的主要手段以及相关的基础原理,最后分析了它们各自的问题并提出了相应的解决思路。     

PbO-PbI2复合物膜转化的CH3NH3PbI3钙钛矿薄膜及其光电特性

有机-无机卤化物钙钛矿是一类优异的光电材料. 在过去四年内, 基于有机-无机卤化物钙钛矿的光电器件实现了超过15%的光电转换效率. 而有机-无机卤化物钙钛矿材料的可控制备是保证其在光电器件中应用的基础. 本文采用新的沉积方法在玻璃衬底表面制备了一种典型的有机-无机卤化物钙钛矿CH₃NH₃PbI₃薄膜. 其制备过程是: 采用超声辅助的连续离子吸附与反应法在玻璃衬底表面沉积PbO-PbI₂复合物膜, 之后与CH3NH3I蒸汽在110 ℃环境下反应, 将PbO-PbI₂复合物膜转化成CH₃NH₃PbI₃钙钛矿薄膜. 对CH₃NH₃PbI₃薄膜的微观结构, 结晶性及其光电性能等进行了表征. 结果表明, CH₃NH₃PbI₃薄膜呈晶态, 具有典型的钙钛矿晶体结构. 薄膜表面形貌均匀, 晶粒尺寸超过400 nm. 在可见光范围, CH₃NH₃PbI₃薄膜透过率低于10%, 能带宽度为1.58eV. 电学性能研究表明CH₃NH₃PbI₃薄膜表面电阻率高达1000 MΩ. 高表面电阻率表明CH₃NH₃PbI₃薄膜具有一定的介电性能, 其介电常数(ε_r)在100 Hz时达到155. 本研究提出了一种制备高质量CH₃NH₃PbI₃钙钛矿薄膜的新方法, 所得CH₃NH₃PbI₃薄膜可望在光、电及光电器件中得到应用.     

Distinguishing metal halide molecular clusters from perovskite magic sized clusters in the synthesis of metal halide perovskite nanostructures

Background

Research into perovskite nanocrystals (PNCs) has uncovered interesting properties compared to their bulk counterparts, including tunable optical properties due to size-dependent quantum confinement effect (QCE). More recently, smaller PNCs with even stronger QCE have been discovered, such as perovskite magic sized clusters (PMSCs) and ligand passivated PbX₂ metal halide molecular clusters (MHMCs) analogous to perovskites.

Objective

This review aims to present recent data comparing and contrasting the optical and structural properties of PQDs, PMSCs, and MHMCs, where CsPbBr₃ PQDs have first excitonic absorption around 520 nm, the corresponding PMSCS have absorption around 420 nm, and ligand passivated MHMCs absorb around 400 nm.

Results

Compared to normal perovskite quantum dots (PQDs), these clusters exhibit both a much bluer optical absorption and emission and larger surface-to-volume (S/V) ratio. Due to their larger S/V ratio, the clusters tend to have more surface defects that require more effective passivation for stability.

Conclusion

Recent study of novel clusters has led to better understanding of their properties. The sharper optical bands of clusters indicate relatively narrow or single size distribution, which, in conjunction with their blue absorption and emission, makes them potentially attractive for applications in fields such as blue single photon emission.     

全无机卤化铅钙钛矿的结构、热力学稳定性和电子性质

有机-无机杂化卤化铅钙钛矿因具有独特的电子和光学特性,已经成为光电领域最有前途的材料。但是,有机-无机钙钛矿材料及器件稳定性差,限制了其实际应用。与杂化钙钛矿相比,全无机卤化物钙钛矿CsPbX₃(X=Cl,Br,I)显示出更强的热稳定性。全无机卤化物钙钛矿CsPbX₃具有多个晶型,在不同的温度下呈不同相结构。目前,关于CsPbX₃的结构和物理性质仍存在争议。本文我们针对三个晶相α-,β-和γ-CsPbX₃的结构,热力学稳定性和电子性质进行了全面的理论研究。第一性原理计算表明,从高温α相到低温β相,然后再到γ相的相变伴随着PbX₆八面体的畸变。零温形成能计算表明,γ相最稳定,这与实验中γ相为低温稳定相的结论一致。电子性质计算表明,所有CsPbX₃钙钛矿都表现出直接带隙性质,并且带隙值从α相到β相再到γ相逐渐增加。这是由于相变发生时,Pb-X成键强度逐渐减弱,使价带顶能量降低,进而带隙增加。在所有相中,α相结构中较强的Pb-X相互作用,导致了较强的带边色散,使其具有较小的载流子有效质量。     

反溶剂法快速合成高效发光二维锡卤钙钛矿材料

铅卤钙钛矿材料由于其优异的光电性质而受到了广泛关注. 但是, 材料中铅的毒性问题极大地阻碍了其大规模应用. 因此, 寻找与铅卤钙钛矿具有相似光电性质的非铅卤化物钙钛矿材料十分重要. 其中, 锡基卤化物钙钛矿被认为是铅基钙钛矿材料最佳的替代材料之一. 本文通过简便的反溶剂方法, 合成了一系列新型二维(RNH₃)₂SnX₄(R为烷基链, X=Br^-, I^-)钙钛矿材料. 研究结果表明, 所合成的材料具有优异的荧光发射性质, 发光量子效率高达98.5%, 比三维ASnX₃[A=Cs⁺, 甲胺(MA⁺), 甲脒(FA⁺)等]型钙钛矿表现出更好的稳定性. 本文所采用的合成方法简单易行, 有利于实现金属卤化物钙钛矿材料的大规模合成及在固态照明器件和显示器件领域的工业应用.     

Lead‐Free Halide Perovskite Nanocrystals: Crystal Structures,Synthesis, Stabilities,and Optical Properties

In recent years, there have been rapid advances in the synthesis of lead halide perovskite nanocrystals (NCs) for use in solar cells, light emitting diodes, lasers, and photodetectors. These compounds have a set of intriguing optical, excitonic, and charge transport properties, including outstanding photoluminescence quantum yield (PLQY) and tunable optical band gap. However, the necessary inclusion of lead, a toxic element, raises a critical concern for future commercial development. To address the toxicity issue, intense recent research effort has been devoted to developing lead‐free halide perovskite (LFHP) NCs. In this Review, we present a comprehensive overview of currently explored LFHP NCs with an emphasis on their crystal structures, synthesis, optical properties, and environmental stabilities (e.g., UV, heat, and moisture resistance). In addition, strategies for enhancing optical properties and stabilities of LFHP NCs as well as the state‐of‐the‐art applications are discussed. With the perspective of their properties and current challenges, we provide an outlook for future directions in this rapidly evolving field to achieve high‐quality LFHP NCs for a broader range of fundamental research and practical applications.     

Water‐Assisted Size and Shape Control of CsPbBr3 Perovskite Nanocrystals

Lead‐halide perovskites are well known to decompose rapidly when exposed to polar solvents, such as water. Contrary to this common‐place observation, we have found that through introducing a suitable minor amount of water into the reaction mixture, we can synthesize stable CsPbBr₃ nanocrystals. The size and the crystallinity, and as a result the band gap tunability of the strongly emitting CsPbBr₃ nanocrystals correlate with the water content. Suitable amounts of water change the crystallization environment, inducing the formation of differently shaped perovskites, namely spherical NCs, rectangular nanoplatelets, or nanowires. Bright CsPbBr₃ nanocrystals with the photoluminescence quantum yield reaching 90 % were employed for fabrication of inverted hybrid inorganic/organic light‐emitting devices, with the peak luminance of 4428 cd m^?2 and external quantum yield of 1.7 %.     

无机铅卤钙钛矿纳米晶的合成、性能及应用

无机铅卤钙钛矿CsPbX₃(X=Cl,Br,I)纳米晶因具有较高荧光量子效率(~90%)、发光波长覆盖整个可见光谱(400~700 nm)、半高宽相对较窄(12~42 nm)等诸多优点而备受关注,这些性能使之成为当前最具有潜在应用价值的发光材料之一。 因此,近年来对该类无机铅卤钙钛矿材料的报道越来越多。 本文主要介绍了无机铅卤钙钛矿发光材料的发展历程、结构、制备方法、生长机理及当前的主要应用领域等,最后概括了无机铅卤钙钛矿发光材料在当前研究背景下所面临的问题并展望了下一阶段的发展方向,为进一步提高其光学性能及开发新型高效的无机铅卤钙钛矿发光材料奠定基础。     

Aqueous Precursor Induced Morphological Change and Improved Water Stability of CsPbBr3 Nanocrystals

In the literature, lead halide perovskites are very notable for their degradation in the presence of polar solvents, such as water. In contrast, in this research, it is observed that adding a minor amount of water into the precursor solution can improve the stability and photoluminescence quantum yield of CsPbBr₃ nanocrystals through a ligand-assisted reprecipitation (LARP) method. In this way, the shape and phase transformation from CsPbBr₃ nanoplates to CsPbBr₃/Cs₄PbBr₆ nanorods and Cs₄PbBr₆ nanowires can be controlled with increasing water content in the precursor solution. Upon adding water up to an ideal amount, CsPbBr₃ maintains its phase and nanoplate morphology. The key role of water amount for tuning the crystallinity, stability, morphology, optical properties, and phase transformation of cesium lead halide perovskite nanocrystals will be beneficial in the future commercialization of optoelectronics.     

Synthesis of nanocrystal-polymer transparent hybrids via polyurethane matrix grafted onto functionalized CdS nanocrystals

We reported the first synthesis of CdS nanocrystal-polymer transparent hybrids by using polyurethane (PU) grafted onto quantum dots (QDs) CdS nanocrystals. In a typical run, the appropriate amounts of cadmium chloride (CdCl2) and sodium sulfide (Na2S) in the presence of 2-mercaptoethanol (ME) as the organic ligand are well dispersed in H2O/DMF solution without any aggregation. From a combination of transmission electron microscopy (TEM) and a computing method of Brus's model according to UV-vis absorption spectra, the particle size of as-prepared hydroxyl-coated CdS nanocrystals is about 5 nm. Then, PU-CdS transparent nanocomposites hybrids were synthesized by a two-step reaction. The effect of the different ratios of ME/Cd2+ and H2O/DMF on the resulting particle size of CdS nanocrystals was investigated by UV-vis absorption measurements. FT-IR and TGA characterizations indicate the formation of robust bonding between CdS nanocrystals and the organic ligand. The fluorescence measurement shows that CdS-PU hybrids exhibit good optical properties.     

甲胺基-甲脒基混合钙钛矿的第一性原理研究

有机铅卤钙钛矿APbX_3的稳定性是制约其应用的重要因素,对APbX_3钙钛矿中A和X采用不同种类离子混合的化学组分调控是改进其稳定性最有效的方式之一。其中,A位点采用不同比例的甲脒离子(FA)和甲胺离子(MA)是当前研究的热点方向。本文通过第一性原理计算,系统研究了FA_(1-x)MA_xPbI_3体系的结构和光电性质。研究发现FA与MA的混合增加体系的稳定性,其中FA_(0.5)MA_(0.5)PbI_3最稳定。通过分析不同混合比例的结构,揭示了晶格常数随x的增加线性减小;以及带隙随x减小而线性增加。此外,计算结果发现MA所占比例增加时吸收光谱蓝移。研究表明通过FA和MA离子的混合能有效调控钙钛矿的光电性质,从而获得更有效的钙钛矿太阳能电池。     

Chemical aerosol flow synthesis of semiconductor nanoparticles

Nanometer-sized semiconductor particles (quantum dots) have been the subject of intense research during the past decade owing to their novel electronic, catalytic, and optical properties. Fundamental properties of these nanoparticles (1-20 nm diameter) can be systematically changed simply by controlling the size of the crystals while holding their chemical composition constant. We describe here a new methodology for the continuous production of fluorescent CdS, CdSe, and CdTe nanoparticles using ultrasonically generated aerosols of high boiling point solvents. Each submicron droplet serves as a separate nanoscale chemical reactor, with reactions proceeding as the liquid droplets (which hold both reactants and surface stabilizers) are heated in a gas stream. The method is inexpensive, scalable, and allows for the synthesis of high quality nanocrystals. This chemical aerosol flow synthesis (CAFS) can be extended to the synthesis of nanostructured metals, oxides, and other materials.     

Optical properties of Ag/CdTe nanocomposite self-organized by electrostatic interaction

Ag/CdTe nanocomposite was prepared via self-organization process by electrostatic interaction between positively charged CdTe quantum dots and negatively charged Ag nanoparticles and examined with respect to their optical properties. The positively charged CdTe quantum dots and negatively charged Ag nanoparticles were synthesized separately by modifying nanoparticles surface with cationic and anionic thiol compounds, respectively. The result showed that the mixing ratio of Ag nanoparticles to CdTe quantum dots is an important parameter for controlling resulting composites. The resulting solution is optically transparent if one component is in excess. Photoluminescence of CdTe quantum dots undergoes considerably quenching if CdTe nanocrystals are in excess and SERS spectra of BVPP absorbed on Ag colloid became stronger if Ag nanoparticles are in excess. Nevertheless, while the ratio is approximately 1, micrometer-sized solid composite is obtained with the elapse of 1h after mixing. SERS spectra for solid composite only exhibit the signals of the CdS nanocrystal which reflected that prolonged refluxing during the synthesis leads to a partial hydrolysis of the thiols and to the incorporation of the sulfur from the thiol molecules into the the growing nanoparticles to form mixed CdTe(S) nanocrystal, similar to CdTe/CdS core/shell structure. From the results, we conclude that optical properties of Ag/CdTe are dependent on the mixing ratio of both nanoparticles.     

Silicon Nanocrystals and Silicon‐Polymer Hybrids: Synthesis,Surface Engineering,and Applications

Silicon nanocrystals (Si‐NCs) are emerging as an attractive class of quantum dots owing to the natural abundance of silicon in the Earth's crust, their low toxicity compared to many Group II–VI and III–V based quantum dots, compatibility with the existing semiconductor industry infrastructure, and their unique optoelectronic properties. Despite these favorable qualities, Si‐NCs have not received the same attention as Group II–VI and III–V quantum dots, because of their lower emission quantum yields, difficulties associated with synthesizing monodisperse particles, and oxidative instability. Recent advancements indicate the surface chemistry of Si‐NCs plays a key role in determining many of their properties. This Review summarizes new reports related to engineering Si‐NC surfaces, synthesis of Si‐NC/polymer hybrids, and their applications in sensing, diodes, catalysis, and batteries.     

Lead‐Free Sodium–Indium Double Perovskite Nanocrystals through Doping Silver Cations for Bright Yellow Emission

Lead‐free halide perovskite nanocrystals (NCs) have drawn wide attention for solving the problem of lead perovskites toxicity and instability. Herein, we synthesize the direct band gap double perovskites undoped and Ag‐doped Cs₂NaInCl₆ NCs by variable temperature hot injection. The Cs₂NaInCl₆ NCs have little photoluminescence because of dark self‐trapped excitons (STEs). The dark STEs can be converted into bright STEs by doping with Ag⁺ to produce a bright yellow emission, with the highest photoluminescence quantum efficiency of 31.1 %. The dark STEs has been directly detected experimentally by ultrafast transient absorption (TA) techniques. The dynamics mechanism is further studied. In addition, the Ag‐doped NCs show better stability than the undoped ones. This result provides a new way to enhance the optical properties of lead‐free perovskites NCs for high‐performance light emitters.     

How Chemical Bonding Impacts Halide Perovskite Nanocrystals Growth to Bulk Films: Implication of Pb−X Bond on Growth Kinetics

Lead halide perovskites nanocrystals have emerged as a leading candidate in perovskite solar cells and light-emitting diodes. Given their favorable, tunable optoelectronic properties through modifying the size of nanocrystals, it is imperative to understand and control the growth of lead halide perovskite nanocrystals. However, during the nanocrystal growth into bulk films, the effect of halide bonding on growth kinetics remains elusive. To understand how a chemical bonding of Pb−X (covalency and ionicity) impact on growth of nanocrystals, we have examined two different halide perovskite nanocrystals of CsPbCl₃ (more ionic) and CsPbI₃ (more covalent) derived from the same parent CsPbBr₃ nanocrystals. Tracking the growth of nanocrystals by monitoring the spectral features of bulk peaks (at 445 nm for Cl and at 650 nm for I) enables us to determine the growth activation energy to be 92 kJ/mol (for CsPbCl₃) versus 71 kJ/mol (for CsPbI₃). The electronegativity of halides in Pb−X bonds governs the bond strength (150–240 kJ/mol), characteristics of bonding (ionic versus covalent), and growth kinetics and resulting activation energies. A fundamental understanding of Pb−X bonding provides a significant insight into controlling the size of the perovskite nanocrystals with more desired optoelectronic properties.     

Aqueous Synthesis of Methylammonium Lead Halide Perovskite Nanocrystals

Methylammonium lead halide perovskite nanocrystals offer attractive optoelectronic properties but suffer from fast degradation in the presence of water. In contradiction to this observation, we demonstrate the possibility of a direct aqueous synthesis of CH₃NH₃PbX₃ (X=Br or Cl/Br) nanocrystals through the reaction between the lead halide complex and methylamine when the pH is maintained in the range of 0–5. Under these synthetic conditions, the positively charged surface of the perovskite nanocrystals and the proper ionic balance help to prevent their decomposition in water. Additional surface capping with organic amine ligands further improves the photoluminescence quantum yield of the perovskite nanocrystals to values close to 40 %, ensures their stability under ambient conditions for several months, and their photoluminescence performance under continuous 0.1 W mm^?2 405 nm light irradiation for over 250 hours.     

Study of nanocrystalline BiMnO3-PbTiO3: synthesis, structural elucidation, and magnetic characterization of the whole solid solution

In the last ten years, the study and the search for new multiferroic materials have been a major challenge due to their potential applications in electronic technology. In this way, bismuth-containing perovskites (BiMO(3)), and particularly those in which the metal?M position is occupied by a magnetically active cation, have been extensively investigated as possible multiferroic materials. From the point of view of synthesis, only a few of the possible bismuth-containing perovskites can be prepared by conventional methods but at high pressures. Herein, the preparation of one of these potential multiferroic systems, the solid solution xBiMnO(3)-(1-x)PbTiO(3) by mechanosynthesis is reported. Note that this synthetic method allows the oxides with high x values, and more particularly the BiMnO(3) phase, to be obtained as nanocrystalline phases, in a single step and at room temperature without the application of external pressure. These results confirm that, in the case of Bi perovskites, mechanosynthesis is a good alternative to high-pressure synthesis. These materials have been studied from the point of view of their structural characteristics by precession electron diffraction and magnetic property measurements.     

Halogen Vacancies Enable Ligand‐Assisted Self‐Assembly of Perovskite Quantum Dots into Nanowires

Interest has been growing in defects of halide perovskites in view of their intimate connection with key material optoelectronic properties. In perovskite quantum dots (PQDs), the influence of defects is even more apparent than in their bulk counterparts. By combining experiment and theory, we report herein a halide‐vacancy‐driven, ligand‐directed self‐assembly process of CsPbBr₃ PQDs. With the assistance of oleic acid and didodecyldimethylammonium sulfide, surface‐Br‐vacancy‐rich CsPbBr₃ PQDs self‐assemble into nanowires (NWs) that are 20–60 nm in width and several millimeters in length. The NWs exhibit a sharp photoluminescence profile (≈18 nm full‐width at‐half‐maximum) that peaks at 525 nm. Our findings provide insight into the defect‐correlated dynamics of PQDs and defect‐assisted fabrication of perovskite materials and devices.