Characterization of PVdF(HFP) gel electrolytes based on 1-(2-Hydroxyethyl)-3-methyl imidazolium ionic liquids

Poly(vinylidenefluoride)-hexafluoropropylene (PVdF(HFP))-ionic liquid gel electrolytes were prepared using ionic liquids based on 1-(2-hydroxyethyl)-3-methyl imidazolium tetrafluoroborate and 1-(2-hydroxyethyl)-3-methyl imidazolium hexafluorophosphate. A conventional metathesis reaction was used to prepare these ionic liquids, which have high purity and exhibit a liquid state at room temperature. The prepared polymer-ionic liquid gel proved to be a free-standing and rubbery film in which the degree of transparency differed according to the ratio and type of ionic liquid used. TGA and FTIR analyses confirmed that the solvent, N,N-Dimethylacetamide (DMAC), used for mixing PVdF(HFP) polymer with ionic liquid was almost totally removed during the gelling and drying processes. SEM photographs were taken of the surface structure of the PVdF(HFP)-ionic liquid gel in order to evaluate the morphology of the film's surface according to the mixing ratio and the nature of the ionic liquid. The thermal behaviors of PVdF(HFP)-ionic liquid gels were observed to be similar to those of neat ionic liquids through DSC analysis, and the compatibility between the polymer and ionic liquid was investigated by XRD analysis. The ionic conductivities of all the gels were 10(-3)-10(-5) S cm(-1) in a temperature range of 20-70 degrees C.     

Structural and characteristic analysis of carbon nanotubes-ionic liquid gel biosensor

The structure and characteristic of carbon nanotubes-ionic liquid gel biosensor were studied by voltammetry, microscopy and spectroscopy. Various biomolecules were electrochemically detected with this gel biosensor such as glucose oxidase and NADH. The excellent electrochemical behavior of this gel biosensor might be due to the following three main factors: (1) the inherently perfect electrochemical characteristic of multi-wall carbon nanotubes (MWNTs); (2) the better solvent effect and conductivity of ionic liquid as well as the proper interactions between MWNTs and ionic liquid; (3) the proper mixing ratio of MWNTs to ionic liquid. Meanwhile, the interactions between MWNTs and ionic liquid were carefully studied as well. It can be concluded that the non-covalent (π–π) interaction between the imidazole loop of ionic liquid and MWNTs side wall should play an important role. This work gives a further understanding of what results in the high sensitivity and selectivity of such a biosensor to some biomolecules, and provides a simple and easy approach to design new biosensors with various nano-particles and versatile ionic liquid.     

染料敏化纳米薄膜太阳电池中离子液体基电解质的研究进展

综述了离子液体基电解质在染料敏化纳米薄膜太阳电池中的研究及应用进展，详细论述了多种离子液体基电解质系统对染料敏化纳米薄膜太阳电池性能的影响，并比较了这些系统的优缺点. 根据胶凝剂的不同分别论述了离子液体基电解质的固化及其对电池性能的影响. 评述了离子液体基电解质在大面积电池中的应用，并对离子液体基电解质未来发展方向进行了展望.     

Influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate: a sum frequency generation analysis

Sum frequency generation spectroscopy (SFG) was used to study the influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. The orientation of the cation at the gas-liquid interface was analyzed as a function of ionic liquid concentration in water for concentrations from 0 to 1 mole fraction of the ionic liquid. The cation was found to be oriented with the imidazolium ring nearly parallel to the surface plane with a tilt angle > or = 70 degrees when the ionic liquid was dry. Furthermore, no noticeable change in the orientation was observed when high concentrations of water were mixed with the ionic liquid. The cation butyl chain is projecting into the gas phase with a CH(3) tilt angle of 54 +/- 2 degrees when the ionic liquid is dry and 46 +/- 4 degrees when mixed with water. Water is oriented at the surface only for concentration < or = 0.02 mole fraction of the ionic liquid. At higher ionic liquid concentrations (mole fractions > or = 0.05) the gas-liquid interface resembles that of the pure ionic liquid.     

1-乙基-3-丁基苯并咪唑六氟化磷离子液体液相微萃取剂的制备与应用

合成了1-乙基苯并咪唑（eBim）、1-乙基-3-丁基苯并咪唑溴(C4eBimBr)中间体和1-乙基-3-丁基苯并咪唑六氟化磷(C4eBimPF6)离子液体。 通过红外光谱和核磁共振波谱表征了各步反应产物的结构。 基于离子液体分散液相微萃取-高效液相色谱法分析了水中邻苯二甲酸辛酯(DOP)和邻苯二甲酸壬酯(DNP)。 考察了萃取温度、萃取时间和离子液体用量对DOP和DNP萃取效果的影响。 在1.0～10 μg/L范围内,DOP和DNP的色谱峰高与质量浓度分别呈线性关系,相关系数（r2）分别为0.984 7和0.987 2。 DOP和DNP的最低检出限分别为0.018和0.052 μg/L,加标回收率分别为94.3%~102%和93.5%~103%。     

Block copolymer micelle shuttles with tunable transfer temperatures between ionic liquids and aqueous solutions

Four poly((1,2-butadiene)- block-ethylene oxide) (PB-PEO) diblock copolymers were shown to self-assemble into micelles with PB cores and PEO coronas (including spheres, cylinders, and vesicles) in the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). All four systems exhibited the "micelle shuttle" (He, Y.; Lodge, T. P. J. Am. Chem. Soc. 2006, 128, 12666-12667), whereby PB-PEO micelles transferred, reversibly and with preservation of micelle structure, from an aqueous phase at room temperature to a hydrophobic ionic liquid at high temperature. The micelle size (both mean and distribution) depends on whether it was initially dissolved in water or in the ionic liquid, but the initial micelle structures in the ionic liquid were shown by dynamic light scattering to be preserved during the transfer and persist essentially unchanged for months in both the ionic liquid and water. The transfer was shown to be driven by the deteriorating solvent quality of water for PEO at high temperature, while the ionic liquid remains a good solvent. The transfer temperature could be tuned by adding ionic or nonionic additives to the aqueous phase to change the solvent quality of water for PEO, and by using ionic liquids with different polarity.     

原位聚合制备的离子液体/聚合物电解质的研究

采用原位聚合制备出新型的BMIPF6/PMMA聚合物电解质透明弹性膜. 研究结果表明, BMIPF6/PMMA聚合物电解质体系在305 ℃时仍具有较好的热稳定性, 其安全性能优于含有机溶剂的传统非水电解质体系. 随着离子液体含量的增加, 其玻璃化转变温度逐渐减小, 离子电导率升高; 且离子电导率与温度的关系服从VTF方程. 其中, 当BMIPF6的质量分数为50%时, 该聚合物电解质的室温离子电导率高达0.15 mS/cm.     

过渡金属离子液体EMIFeCl3的性质研究

在干燥高纯氩气氛的手套箱内, 直接将摩尔比为1∶1的高纯无水FeCl3与氯化1-甲基-3-乙基咪唑(EMIC)混合, 得到棕色透明的离子液体EMIFeCl4. 在293.15~343.15 K温度范围内测定了该离子液体的密度和表面张力. 利用Glasser经验方程和空隙模型研究了EMIFeCl4的性质, 并与离子液体EMIAlCl4进行比较, 指出空隙模型具有一定的合理性.     

Adjusting the chromatographic properties of poly(ionic liquid)‐modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)‐modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)‐modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)‐modified stationary phases can provide various interactions toward solutes. Compared to the cyano‐functionalized poly(ionic liquid) stationary phase, the tetrazolyl‐functionalized poly(ionic liquid) stationary phase provides additional cation‐exchange and π‐π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti‐inflammatory drugs.     

Synthesis of Tetrahydrofuran and Tetrahydropyran Derivatives Catalyzed by Tungstophosphoric Acid in Ionic Liquid

Synthesis of tetrahydrofuran and tetrahydropyran derivatives catalyzed by tungstophosphoric acid （H3PW12040） were conveniently performed with high yield from the corresponding unsaturated alcohols in ionic liquid. Sufuric acid （H2SO4）, trifluoromathanesulfonic acid （TfOH） and p-toluenesulfonic acid （TsOH） were also explored for preparing these products in ionic liquid. The catalysts and ionic liquid can be easily recovered and reused.     

Studies on the properties of ionic liquid BMIInCl4

An ionic liquid (IL) was prepared by directly mixing InCl₃ and 1-methyl-3-butylimidazolium chloride(BMIC) with molar ratio 1:1 under dry argon atmosphere. The densities, and surface tension of pure IL were determined at temperature range of (278.15 to 343.15±0.1K). The properties for ionic liquid based on group III were discussed using Glasser’s theory. The standard entropy, the surface energy and the crystal energy of ionic liquid were calculated, respectively. The crystal energy of ionic liquid is much lower than ionic solid and this is the underlying reason for forming ionic liquid at room temperature. In addition, a new theoretical model of IL, that is interstice model, was applied to calculate the thermal expansion coefficient of BMIInCl₄. The order of magnitude for the thermal expansion coefficient, a, calculated by the theoretical model is in good agreement with experimental value. The result shows that there is much reasonableness for the interstice model of ionic liquid. __________ Translated from Chemical Journal of Chinese University, 2005, 26(10)(in Chinese)     

Poly(ethylene glycol)-lipase complexes that are highly active and enantioselective in ionic liquids

Lipase-catalyzed alcoholysis between vinyl acetate and 2-phenyl-1-propanol was investigated in dialkylimidazolium-based ionic liquids. Although native lipase powder exhibited very low activity in an ionic liquid, forming a poly(ethylene glycol)(PEG)-lipase complex improved the lipase activity in the ionic liquid. The activity of the PEG-lipase complex was higher in ionic liquids than in common organic solvents (n-hexane, isooctane and dimethylsulfoxide). Fluorescence measurements using 4-aminophthalimide revealed that the ionic liquids were more hydrophilic than the organic solvents used for non-aqueous enzymology. A kinetic study of lipase-catalyzed alcoholysis in an ionic liquid ([Bmim][PF6]) revealed that the Michaelis constant (Km) for 2-phenyl-1-propanol in the ionic liquid was half that in n-hexane, suggesting that the ionic liquid stabilized the enzyme-substrate complex. Finally, we carried out enantioselective alcoholysis of 1-phenylethanol in ionic liquids employing the PEG-lipase complex, and obtained high enantioselectivity, comparable to that in n-hexane.     

Heterogeneous electron transfer kinetics at the ionic liquid/metal interface studied using cyclic voltammetry and scanning electrochemical microscopy

The electrochemical behavior of a redox-active, ferrocene-modified ionic liquid (1-ferrocenylmethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) in acetonitrile and in an ionic liquid electrolyte (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) is reported. Reversible electrochemical behavior was observed in each electrolyte with responses typical of those for unmodified ferrocene observed in each medium. In the ionic liquid electrolyte, the diffusion coefficient of the redox-active ionic liquid increased by a factor of 5 upon increasing the temperature from 27 to 90 degrees C. The kinetics of electron transfer across the ionic liquid/electrode interface were studied using cyclic voltammetry, and the standard heterogeneous electron transfer rate constant, k (0) was determined to be 4.25 x 10 (-3) cm s (-1). Scanning electrochemical microscopy was then also used to probe the heterogeneous kinetics at the interface between the ionic liquid and the solid electrode and conventional kinetic SECM theory was used to determine k (0). The k (0) value obtained using SECM was higher than that determined using cyclic voltammetry. These results indicate that SECM is a very useful technique for studying electron transfer dynamics in ionic liquids.     

氯铝酸离子液体酸性的吡啶探针红外光谱研究

利用吡啶探针红外光谱法研究了氯铝酸离子液体的酸性,发现当氯铝酸离子液体A lC l3的摩尔分数x为0.4~0.5时,离子液体表现出弱Lew is酸的红外特性。对吡啶探针吸附Lew is酸位A l2C l7-、A lC l4-、A l2C l6和A lC l3的各振动模式红外特征峰峰位进行了归属,通过红外特征峰峰位置和峰面积可以指示离子液体的酸强度。利用吡啶探针递增吸附法考察了吡啶递增吸附对氯铝酸离子液体酸性位的影响。研究发现,当吡啶量增加到一定程度时,Py-A l2C l7-配位络合物容易与吡啶发生反应生成Py-A lC l4-和Py-A lC l3配位络合物,从而导致离子液体的吡啶吸附红外特征峰发生变化。     

Heavy metals adsorption by novel EDTA-modified chitosan-silica hybrid materials

Ionic liquid based microemulsions were characterized by absorption solvatochromic shifts, (1)H NMR and kinetic measurements in order to investigate the properties of the ionic liquid within the restricted geometry provided by microemulsions and the interactions of the ionic liquid with the interface. Experimental results show a significant difference between the interfaces of normal water and the new ionic liquid microemulsions. Absorption solvatochromic shift experiments and kinetic studies on the aminolysis of 4-nitrophenyl laurate by n-decylamine show that the polarity at the interface of the ionic liquid in oil microemulsions (IL/O) is higher than at the interface of water in oil microemulsions (W/O) despite the fact that the polarity of [bmim][BF(4)(-)] is lower than the polarity of water. (1)H NMR experiments showed that an increase in the ionic liquid content of the microemulsion led to an increase in the interaction between [bmim][BF(4)(-)] and TX-100. The reason for the higher polarity of the microemulsions with the ionic liquid can be explained in terms of the incorporation of higher levels of the ionic liquid at the interface of the microemulsions, as compared to water in the traditional systems.     

Design of guanidinium ionic liquid based microwave‐assisted extraction for the efficient extraction of Praeruptorin A from Radix peucedani

A series of novel tetramethylguanidinium ionic liquids and hexaalkylguanidinium ionic liquids have been synthesized based on 1,1,3,3‐tetramethylguanidine. The structures of the ionic liquids were confirmed by ¹H NMR spectroscopy and mass spectrometry. A green guanidinium ionic liquid based microwave‐assisted extraction method has been developed with these guanidinium ionic liquids for the effective extraction of Praeruptorin A from Radix peucedani. After extraction, reversed‐phase high‐performance liquid chromatography with UV detection was employed for the analysis of Praeruptorin A. Several significant operating parameters were systematically optimized by single‐factor and L₉ (3⁴) orthogonal array experiments. The amount of Praeruptorin A extracted by [1,1,3,3‐tetramethylguanidine]CH₂CH(OH)COOH is the highest, reaching 11.05 ± 0.13 mg/g. Guanidinium ionic liquid based microwave‐assisted extraction presents unique advantages in Praeruptorin A extraction compared with guanidinium ionic liquid based maceration extraction, guanidinium ionic liquid based heat reflux extraction and guanidinium ionic liquid based ultrasound‐assisted extraction. The precision, stability, and repeatability of the process were investigated. The mechanisms of guanidinium ionic liquid based microwave‐assisted extraction were researched by scanning electron microscopy and IR spectroscopy. All the results show that guanidinium ionic liquid based microwave‐assisted extraction has a huge potential in the extraction of bioactive compounds from complex samples.     

吡啶类离子液体萃取-氧化脱除含硫化合物

制备了N-丁基吡啶四氟硼酸盐离子液体([BPy]BF₄), 考察了其对含有噻吩和二苯并噻吩的模型油萃取脱硫的效果. 在此基础上以离子液体为萃取剂, 以过氧化氢(质量分数30%)为氧化剂, 研究了其对模型油进行萃取-氧化脱硫的效果, 结果表明, 当V([BPy]BF₄)∶V(Oil)∶V(H₂O₂)=1∶1∶0.4时, 在55 ℃下进行萃取-氧化脱硫30 min, 噻吩和二苯并噻吩的脱硫率分别达到78.5%和84.3%; 将该萃取-氧化体系应用于实际汽油体系, 脱硫率达到56.3%; 对使用过的离子液体进行再生处理, 重复使用4次脱硫率无明显变化.     

Determination of metal ions in tea samples using task‐specific ionic liquid‐based ultrasound‐assisted dispersive liquid–liquid microextraction coupled to liquid chromatography with ultraviolet detection

Task‐specific ionic liquid‐based ultrasound‐assisted dispersive liquid–liquid microextraction was used for the preconcentration of cadmium(II), cobalt(II), and lead(II) ions in tea samples, which were subsequently analyzed by liquid chromatography with UV detection. The proposed method of preconcentration is free of volatile organic compounds, which are often used as extractants and dispersing solvents in classic techniques of microextraction. A task‐specific ionic liquid trioctylmethylammonium thiosalicylate was used as an extractant and a chelating agent. Ultrasound was used to disperse the ionic liquid. After microextraction, the phases were separated by centrifugation, and the ionic liquid phase was solubilized in methanol and directly injected into the liquid chromatograph. Selected microextraction parameters, such as the volume of ionic liquid, the pH of the sample, the duration of ultrasound treatment, the speed and time of centrifugation, and the effect of ionic strength, were optimized. Under optimal conditions an enrichment factor of 200 was obtained for each analyte. The limits of detection were 0.002 mg/kg for Cd(II), 0.009 mg/kg for Co(II), and 0.013 mg/kg for Pb(II). The accuracy of the proposed method was evaluated by an analysis of the Certified Reference Materials (INCT‐TL‐1, INCT‐MPH‐2) with the recovery values in the range of 90–104%.     

Ionic Liquid–Catalyzed Internal Redox Esterification Reaction

The internal redox esterification of α,β-unsaturated aldehydes and alcohols was carried out using different ionic liquids (ILs) as catalysts and reaction solvents. The basic ionic liquid, 1-butyl-3-methylimidazolium acetate ([bmim]OAc), exhibited the best activity for this reaction. The influences of the amount of ionic liquid catalyst and reaction time on yield of saturated ester have been investigated. The results showed that ionic liquid anions have a crucial effect on the redox esterification of α,β-unsaturated aldehydes and alcohols. The nucleophilic carbenes generated in situ from the ionic liquid cation were believed to be actual active species for this reactions.