A Novel Fluorescent Probe for Lead Ions

A new fluorescent probe for lead ions, p-nitrophenyl 3H-phenoxazin-3-one-7-yl phosphoric acid (NPPA), has been synthesized by linking resorufLn (serving as a fluorophore and electron acceptor) to p-nitrophenol (serving as a fluorescence quencher and electron donor) through phosphodiester bonds. When NPPA was irradiated with light, intramolecular fluorescence self-quenching took place due to the PET (photoinduced electron transfer) from the donor to the acceptor. However, upon addition of Pb^Ⅱ, the phosphate ester bonds in the probe were cleaved and the fluorophore was released, accompanying the retrievement of fluorescence.     

Preparation and Characterization of Dichlorocarbene Modified Multiple-walled Carbon Nanotubes

Multiple-walled carbon nanotubes were functionalized by cycloaddition of dichlorocarbene.The chemical modification was performed by using chloroform and sodium hydroxide.Various phase transfer catalysts were used to increase the efficiency of the reaction.Benzyltriethylammonium chloride used as phase transfer catalyst could highly enhance the effect of functionalization.Elemental analysis was used to evaluate the degree of functionalization.Characterization was performed using scanning electron microscopy(SEM)and transmission electron microscopy(TEM).Fourier transform infrared spectroscopy(FTIR)and energy-dispersive X-ray spectroscopy(EDS)were used to confirm the resulting material.     

Chemical synthesis, spectral characterization and stability of some electrically conducting polymers

<正>The synthesis,characterization,thermal degradation and stability of polyaniline(PANI),poly(m-nitroaniline), poly(m-chloroaniline) and poly(o-methylaniline) were reported.Different properties were measured and compared with PANI to find out the effect of electron donating groups(-CH_3) and electron withdrawing groups(-Cl,- NO_2).It was found that the presence of any type of substitution in the benzene ring of aniline increased the solubility but reduced the yield,thermal stability and electrical conductivity.Two probe methods were used to measure the electrical conductivity of these polymers.The structural properties of these polymers were characterized by using FTIR and UV-Vis spectroscopic methods.Thermal degradation and stability of these polymers were explained by using thermogravimetric analysis(TGA) and conductivity measurements.     

Synthesis, structure and conformation of 1,3-difluorotetraphenyl benzene

The compound trifluoroiodomethane can be activated to react with the electron donor,1,4-dilithiotetraphenyl butadiene,by means of electron transfer catalysis (ETC).The structure of the product,1,3-difluorotetraphenyl,benzene (1),was determined by MS,NMR,and X-ray single crystal diffraction.The conformations of compound 1 and its derivatives were analysized by molecular mechanics.     

STRUCTURAL STUDIES ON CRYSTALLINE 3,4—POLYISOPRENE

In the paper,the structures of the crystalline 3,4-polyisoprene(3,4-PI)which was first synthesized in our institute,were investigated by using Wide AngleX-ray Diffraction(WAXD);Small Angle X-ray Scattering(SAXS)and Laue photography invarious polymerization conditions and elongate ratios.It was found that reducingreaction velocity was favourable for crystalline capacity.The polymeric structures weredependent mainly on nitrogen electron donor.The degree of crystallinity and long periodwere increased with elongate ratio,but crystalline size was decreased.The polymersused in the work belong to inhomogeneous particulate system.The particulate radii werebetween 35-164A.     

Synthesis and photophysical properties of donor–acceptor system based bipyridylporphyrins for dye-sensitized solar cells

Bipyridylporphyrin derivatives possessing a porphyrin moiety as the electron donor and bipyridyl moiety as the electron–acceptor were designed and synthesized for dye-sensitized solar cells(DSSCs). The photophysical and electrochemical properties were investigated by absorption spectrometry and cyclic voltammetry. Density functional theory(DFT) was employed to study electron distribution. From the photovoltaic performance measurements, a maximum conversion efficiency(η) of 0.38% was achieved based on the bipyridylporphyrin ruthenium dye A7(J_(SC)= 1.33 mA/cm~2, V_(OC)= 0.45 V, FF = 0.64) under 1.5 irradiation(100 mW/cm~2).     

可见光下具有高光子效应和光催化活性的CuS-石墨烯氧化物/TiO2复合材料的制备（英文）

CuS-graphene oxide/TiO2 composites were prepared using a sol-gel method to improve the photocatalytic performance of the photocatalyst. The composites were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The photocatalytic activities were examined by the degradation of methylene blue (MB) under visible-light irradiation. The photodegradation of MB under visible-light irradiation reached 90.1% after 120 min. The kinetics of MB degradation was plotted alongside the values calculated from the Langmuir-Hinshelwood equation. The CuS-graphene oxide/TiO2 sample prepared using 0.2 mol of TiO2 showed the best photocatalytic activity. This was attributed to a cooperative reaction as a result of increased photoabsorption by graphene oxide and an increased photocatalytic effect by CuS.     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.     

Controlled Synthesis of Sea-urchin-like ZnO Nanomaterials with the Aid of Ethylene Glycol Using a Solvothermal Method

Sea-urchin-like ZnO nanomaterials were successfully synthesized by decomposition of zinc acetate precursor in the presence of sodium hydroxide and ethylene glycol(EG) in an ethanol solution using a solvothermal method at 180 ℃ for 12 h.The crystalline phase and morphology of the resultant nanomaterials were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),selected-area electronic diffraction(SAED) and high-resolution electron microscopy(HRTEM).Interestingly,the sizes and prod length of the samples can be easily tuned by changing the amount of directing agent EG and keeping other reaction conditions unchangeable.On the basis of our experimental outcomes,EG-controlled-nucleation-growth formation mechanism was proposed to correspond for the sea-urchin-like ZnO growth processes.And the photoluminescence(PL) spectra of the as-selected samples were measured at room temperature,presenting two emission peaks centered at～388 and 480 nm.     

STUDY ON HIGHLY ACTIVE ZIEGLERNATTA CATALYSTS FOR POLYMERIZATION OF OLEFINS

In this paper, highly active Ziegler-Natta catalysts of MgCl_2 supported TiCl_4 for synthesis ofpolyolefins, using di-n-butyl phthalate (DNBP) as internal donor and diphenyl dimethoxyl silane(DPDMS) as external donor, have been prepared. The conditions controlling the treatment ofsupport were studied. The interactions of various components present in the catalysts and theirinfluences on catalytic performance were investigated. It is found that by using DNBP and DPDMSas internal and external donors together the polymer products with higher isotactic index can beobtained. Plausible structure model and mechanism were proposed.     

Exquisite 1D Assemblies Arising from Rationally Designed Asymmetric Donor–Acceptor Architectures Exhibiting Aggregation‐Induced Emission as a Function of Auxiliary Acceptor Strength

One‐dimensional nanostructures with aggregation‐induced emission (AIE) properties have been fabricated to keep the pace with growing demand from optoelectronics applications. The compounds 2‐[4‐(4‐methylpiperazin‐1‐yl)benzylidene]malononitrile ( PM1 ), 2‐{4‐[4‐(pyridin‐2‐yl)piperazin‐1‐yl]‐benzylidene}malononitrile ( PM2 ), and 2‐{4‐[4‐(pyrimidin‐2‐yl)piperazin‐1‐yl]benzylidene}malononitrile ( PM3 ) have been designed and synthesized by melding piperazine and dicyanovinylene to investigate AIE in an asymmetric donor–acceptor (D–A) construct of A′–D–π–A‐ topology. The synthetic route has been simplified by using phenylpiperazine as a weak donor (D), dicyanovinylene as an acceptor (A), and pyridyl/pyrimidyl groups ( PM2/PM3 ) as auxiliary acceptors (A′). It has been established that A′ plays a vital role in triggering AIE in these compounds because the same D–A construct led to aggregation‐caused quenching upon replacing A′ with an electron‐donating ethyl group ( PM1 ). Moreover, the effect of restricted intramolecular rotation and twisted intramolecular charge transfer on the mechanism of AIE has also been investigated. Furthermore, it has been clearly shown that the optical disparities of these A′–D–π–A architectures are a direct consequence of comparative A′ strength. Single‐crystal X‐ray analyses provided justification for role of intermolecular interactions in aggregate morphology. Electrochemical and theoretical studies affirmed the effect of the A′ strength on the overall properties of the A′–D–π–A system.     

New ferrocenyl derivative with controllable aggregation-induced emission (AIE) characteristics

A novel molecular switch, 7-(N,N-diethylamino)-2-oxo-2H-chromen-4-yl ferrocene carboxylate (FCC), was synthesized and fully characterized by ¹H NMR, ¹³C NMR, and HRMS. Taking advantage of the properties of ferrocene as an electron donor active unit and the coumarin as a fluorescent unit, the dyad FCC shows a fast and reversible redox-switchable fluorescence emission. In sharp contrast to most photoluminescent chromophores, FCC has a unique enhanced emission through aggregation. The change of electrochemical signals (CV and DPV) indicated that the ferrocene (F_c) unit of FCC could form inclusion complex with Me-β-cyclodextrin (CD). This inclusion complex could further weaken the aggregation-induced emission (AIE) effect remarkably. This advance paves the way to introduce AIE property into molecular devices applications.     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

Far‐Red/Near‐Infrared Emissive (1,3‐Dimethyl)barbituric Acid‐Based AIEgens for High‐Contrast Detection of Metastatic Tumors in the Lung

Despite of the enthusiastic research in aggregation‐induced emission luminogens (AIEgens) in recent years, the ones that can be smoothly used for sophisticated biomedical applications such as in vivo bioimaging of pulmonary metastatic tumors during surgery are still limited. Herein, we report the design and synthesis of a new series of far‐red/near‐infrared (FR/NIR) fluorescent AIEgens that consist of methoxy‐substituted tetraphenylethene (TPE) as the electron‐donating moiety, (1,3‐dimethyl)barbituric acid as the electron‐withdrawing moiety, and different π‐bridge units. As compared to benzene or 3,4‐ethylenedioxythiophene, using thiophene as the π‐conjugation unit between the donor and acceptor results in a relatively higher absolute fluorescence quantum yield (14.5 %) in water when formulating the corresponding AIEgens into nanoparticles (AIE dots) with an amphiphilic co‐polymer as the doping matrix. The highly FR/NIR‐emissive thiophene‐based AIE dots are demonstrated to be potent for intraoperative detection of pulmonary metastatic tumors, particularly the micro‐sized ones, with excellent signal‐to‐background ratio.     

Aggregation-induced multicolor luminescent nanoparticles with adaptive and fixed cores derived from brominated tetraphenylethene-containing block copolymer

Aggregation-induced emission (AIE)-active nanoparticles (NPs) exhibiting multicolor fluorescence and high-quantum yields independent of the environment are important for the further development of next-generation smart fluorescent materials. In this work, AIE-active amphiphilic block copolymers were designed and synthesized by RAFT polymerization of a brominated tetraphenylethene (TPE)-containing acrylate (A-TPE-Br). The block copolymer exhibited typical AIE effects in selective solvents, which can be explained by hydrophobic TPE aggregated in the core during micelle formation. Luminescent core–shell NPs with a crosslinked AIE core (fixed structure) were synthesized by the Suzuki coupling reaction of the bromine groups of the assembled block copolymer and boronic acid compounds. The NPs composed of TPE/thiophene crosslinked core showed green emission in both diluted state and solid state, implying the ability to fluoresce regardless of environmental changes and molecular dispersion. Multicolor luminescent NPs capable of changing color from blue to red were synthesized by changing the coupling compounds, such as anthracene for electron-rich units and benzothiadiazole for electron-deficient units. The effects of the nature of the donor and acceptor, as well as their combination (TPE/donor/acceptor sequence), on the color and fluorescent intensity of the core crosslinked NPs in the nonpolar and polar solvents, and solid state, were investigated.     

Coumarin-based two-photon AIE fluorophores: Photophysical properties and biological application

Based on the coumarin skeleton, we deliberately designed two groups of fluorophores, termed as Coum-R and Naph-Coum-R, using the diphenylamino group as the electron donor, which displayed long-wavelength emissions (red spectral region), large Stokes shift (up to 204 nm), superior AIE performance, and large two-photon absorbance cross-sections (as high as 365 GM). The electron-withdrawing substituents at the 3-position of these dyes could induce a significant red-shift in their emission spectra. Preliminary imaging experiments demonstrated the capability of these dyes as two-photon fluorophores for specifically staining lipid droplets in living cells.     

Nanoaggregate Probe for Breast Cancer Metastasis through Multispectral Optoacoustic Tomography and Aggregation-Induced NIR-I/II Fluorescence Imaging

An activatable nanoprobe for imaging breast cancer metastases through near infrared-I (NIR-I)/NIR-II fluorescence imaging and multispectral optoacoustic tomography (MSOT) imaging was designed. With a dihydroxanthene moiety serving as the electron donor, quinolinium as the electron acceptor and nitrobenzyloxydiphenylamino as the recognition element, the probe can specifically respond to nitroreductase and transform into an activated D-π-A structure with a NIR emission band extending beyond 900 nm. The activated nanoprobe exhibits NIR emission enhanced by aggregation-induced emission (AIE) and produces strong optoacoustic signal. The nanoprobe was used to detect and image metastases from the orthotopic breast tumors to lymph nodes and then to lung in two breast cancer mouse models. Moreover, the nanoprobe can monitor the treatment efficacy during chemotherapeutic course through fluorescence and MSOT imaging.     

Nanoaggregate Probe for Breast Cancer Metastasis through Multispectral Optoacoustic Tomography and Aggregation‐Induced NIR‐I/II Fluorescence Imaging

An activatable nanoprobe for imaging breast cancer metastases through near infrared‐I (NIR‐I)/NIR‐II fluorescence imaging and multispectral optoacoustic tomography (MSOT) imaging was designed. With a dihydroxanthene moiety serving as the electron donor, quinolinium as the electron acceptor and nitrobenzyloxydiphenylamino as the recognition element, the probe can specifically respond to nitroreductase and transform into an activated D‐π‐A structure with a NIR emission band extending beyond 900 nm. The activated nanoprobe exhibits NIR emission enhanced by aggregation‐induced emission (AIE) and produces strong optoacoustic signal. The nanoprobe was used to detect and image metastases from the orthotopic breast tumors to lymph nodes and then to lung in two breast cancer mouse models. Moreover, the nanoprobe can monitor the treatment efficacy during chemotherapeutic course through fluorescence and MSOT imaging.     

Principles of Aggregation‐Induced Emission: Design of Deactivation Pathways for Advanced AIEgens and Applications

Twenty years ago, the concept of aggregation‐induced emission (AIE) was proposed, and this unique luminescent property has attracted scientific interest ever since. However, AIE denominates only the phenomenon, while the details of its underlying guiding principles remain to be elucidated. This minireview discusses the basic principles of AIE based on our previous mechanistic study of the photophysical behavior of 9,10‐bis(N,N‐dialkylamino)anthracene ( BDAA ) and the corresponding mechanistic analysis by quantum chemical calculations. BDAA comprises an anthracene core and small electron donors, which allows the quantum chemical aspects of AIE to be discussed. The key factor for AIE is the control over the non‐radiative decay (deactivation) pathway, which can be visualized by considering the conical intersection (CI) on a potential energy surface. Controlling the conical intersection (CI) on the potential energy surface enables the separate formation of fluorescent (CI:high) and non‐fluorescent (CI:low) molecules [control of conical intersection accessibility ( CCIA )]. The novelty and originality of AIE in the field of photochemistry lies in the creation of functionality by design and in the active control over deactivation pathways. Moreover, we provide a new design strategy for AIE luminogens (AIEgens) and discuss selected examples.     

Principles of Aggregation-Induced Emission: Design of Deactivation Pathways for Advanced AIEgens and Applications

Twenty years ago, the concept of aggregation-induced emission (AIE) was proposed, and this unique luminescent property has attracted scientific interest ever since. However, AIE denominates only the phenomenon, while the details of its underlying guiding principles remain to be elucidated. This minireview discusses the basic principles of AIE based on our previous mechanistic study of the photophysical behavior of 9,10-bis(N,N-dialkylamino)anthracene ( BDAA ) and the corresponding mechanistic analysis by quantum chemical calculations. BDAA comprises an anthracene core and small electron donors, which allows the quantum chemical aspects of AIE to be discussed. The key factor for AIE is the control over the non-radiative decay (deactivation) pathway, which can be visualized by considering the conical intersection (CI) on a potential energy surface. Controlling the conical intersection (CI) on the potential energy surface enables the separate formation of fluorescent (CI:high) and non-fluorescent (CI:low) molecules [control of conical intersection accessibility ( CCIA )]. The novelty and originality of AIE in the field of photochemistry lies in the creation of functionality by design and in the active control over deactivation pathways. Moreover, we provide a new design strategy for AIE luminogens (AIEgens) and discuss selected examples.