一些高碳富勒烯的光谱及HPLC特征

利用对叔本基杯「８」芳烃对烟炱中Ｃ６０的选择性配合作用 烟炱邻二氯苯（ＯＤＣＢ）提取筘的高碳成份得到富集,用高效液相色谱（ＨＰＬＣ）分离,得到Ｃ７０,Ｃ７６,Ｃ７８,Ｃ８４和五种高碳富勒烯及相应的ＵＶ－Ｖｉｓ光谱,实验中发现,ＯＤＣＢ提取物中Ｃ７８的比例与其它溶剂提取物略有差别,富勒烯的保留时间的对数与富勒烯的碳原子数之间的良好的线性关系,随着富勒烯对称性的降低,ＵＶ－Ｖｉｓ光谱吸收极值增多,谱带     

新型ACNT/C纳米复合材料氧化性能的初步研究

以定向碳纳米管阵列为骨架, 利用化学气相渗(CVI)工艺制备了新型的定向碳纳米管/炭(ACNT/C)纳米复合材料, 并对其氧化性能进行了初步的研究. SEM形貌观察表明, 氧化后的ACNT/C纳米复合材料仍然保持着其基本的管状结构特点, 氧化由外层热解炭向内逐渐进行. 热失重分析 (TGA)检测结果表明, 密度为0.80 g•cm-3的ACNT/C纳米复合材料在空气中的热失重转变温度约为720 ℃, 比相同工艺条件下制备的密度为1.5 g•cm-3的C/C复合材料提高了50 ℃左右. 静态空气等温氧化实验表明, ACNT/C纳米复合材料在550 ℃氧化过程中的化学反应速率明显低于C/C复合材料. 这主要是由于ACNT/C纳米复合材料具有稳定的界面和较高的晶化程度.     

C_（60）－PNVC光电导功能材料的形态与结构研究

用高分辨~（１３）Ｃ核磁共振技术与扫描电镜法研究了Ｃ_（６０）修饰的聚乙烯咔唑（ＰＮＶＣ）光电导功能材料。结果表明，Ｃ_（６０）与ＰＮＶＣ共混时彼此间存在快速动态电荷转移行为；Ｃ_（６０）含量对化学修饰的ＰＮＶＣ结构影响显著。最后比较了Ｃ_（６０），ＰＮＶＣ及用金属有机化学法制备Ｃ_（６０）－ＰＮＶＣ共聚物的亚微观形态结构差异。     

硼/氮掺杂富勒烯C20芳香性的争论

用拓扑共振能(TRE)和百分拓扑共振能(%TRE)方法对硼和氮掺杂富勒烯C20的芳香性进行了研究, 并与核独立化学位移(NICS)方法的结果进行了比较. 研究结果表明, 在C20-2nX2n(X=B, N; n=1,2,3,4)中只有C16N4, C14N6和C12N8具有芳香性, 而其它化合物都具有反芳香性. 这与NICS方法的预测结果不一致. 对NICS判据和TRE方法对C20和C20-2nX2n(B, N; n=1,2,3,4)的芳香性进行判断时所得出的不一致结果及其原因进行了讨论, 认为用NICS判据和2(n+1)2规则对这些化合物芳香性的预测是不可靠的.     

Aromaticity of Heterofullerenes C18BxNy (x+y=2) and Their Molecular Ions

The aromaticity of all possible substituted fullerene isomers of C18N2, C18B2, C18BN, and their molecularions which originate from the C20 (Ih) cage were studied by the topological resonance energy (TRE) and the percentage topological resonance energy methods. The relationship between the aromaticity of C18BxNy isomers and the sites where the heteroatoms dope at the C20 (Ih) cage is discussed. Calculation results show that at the neutral and cationic states all the isomers are predicted to be antiaromatic with negative TREs, but their polyvalent anions are predicted to be aromatic with positive TREs. The most stable isomer is formed by heteroatom doping at the 1,11-sites in C18N2, C18B2, and C18BN. Heterofullerenes are more aromatic than C20. The stability order in the neutral states is C18N2>C18BN>C18B2>C20. The stability order in closed-shell is C18B2 8->C20 6->C18BN6->C18N2 4-. This predicts theoretically that their polyvalent anions have high aromaticity.     

Variation in protein C(alpha)-related one-bond J couplings

Four types of polypeptide (1)J(C alpha X) couplings are examined, involving the main-chain carbon C(alpha) and either of four possible substituents. A total 3105 values of (1)J(C alpha H alpha), (1)J(C alpha C beta), (1)J(C alpha C'), and (1)J(C alpha N') were collected from six proteins, averaging 143.4 +/- 3.3, 34.9 +/- 2.5, 52.6 +/- 0.9, and 10.7 +/- 1.2 Hz, respectively. Analysis of variances (ANOVA) reveals a variety of factors impacting on (1)J and ranks their relative statistical significance and importance to biomolecular NMR structure refinement. Accordingly, the spread in the (1)J values is attributed, in equal proportions, to amino-acid specific substituent patterns and to polypeptide-chain geometry, specifically torsions phi, psi, and chi(1) circumjacent to C(alpha). The (1)J coupling constants correlate with protein secondary structure. For alpha-helical phi, psi combinations, (1)J(C alpha H alpha) is elevated by more than one standard deviation (147.8 Hz), while both (1)J(C alpha N') and (1)J(C alpha C beta) fall short of their grand means (9.5 and 33.7 Hz). Rare positive phi torsion angles in proteins exhibit concomitant small (1)J(C alpha H alpha) and (1)J(C alpha N') (138.4 and 9.6 Hz) and large (1)J(C alpha C beta) (39.9 Hz) values. The (1)J(C alpha N') coupling varies monotonously over the phi torsion range typical of beta-sheet secondary structure and is largest (13.3 Hz) for phi around -160 degrees. All four coupling types depend on psi and thus help determine a torsion that is notoriously difficult to assess by traditional approaches using (3)J. Influences on (1)J stemming from protein secondary structure and other factors, such as amino-acid composition, are largely independent.     

用于富勒烯分离的高效液相色谱固定相

用于富勒烯分离的高效液相色谱固定相陈德朴，郁鉴源，廖沐真，黄贺生，刘凤英，刘梦林（清华大学化学系，北京，１０００８４）（清华大学现代应用物理系）关键词Ｃ_（６０）、Ｃ_（７０）分离，固定相，高效液相色谱目前有关富勒烯的研究是国际上一个非常活跃的研究领域...     

ICP-AES法测定菜头肾中多种微量元素

为探讨测定菜头肾中多种微量元素的方法,采用HNO3-HC lO4体系湿法消化,运用ICP-AES法测定了菜头肾中的多种微量元素。结果表明,菜头肾中K、Ca、Mg、P、S、A l、Na、Fe、Mn等元素含量相对较高,变异系数范围在0.23%~8.92%之间,元素的回收率在82.9%~106.1%之间。该法简便快速,可同时测定菜头肾中多种微量元素。     

Complete assignments of 1H and 13C NMR data for trypanocidal eremantholide C oxide derivatives

The chemical transformations of eremantholide C (1), a trypanocidal sesquiterpene lactone isolated from Lychnophora trichocarpha Spreng., gave five new oxide derivatives: 3'-hydroxyeremantholide C (2), 1'-formyleremantholide C (3), 1'-carboxyeremantholide C (4), 1'-carbomethoxyeremantholide C (5) and sodium 1'-carboxylate of eremantholide C (6). The (1)H and (13)C NMR data of all these derivatives were assigned based on 1D and 2D techniques. The derivatives were evaluated against Y and CL strains of Trypanosoma cruzi. All of them were inactive against the Y strain. Compounds 2 and 5 displayed 100% activity on the CL strain while compounds 4 and 6 were partially active on the CL strain.     

Investigation on Electronic Structures and Spectra for the Substituted Fullerene C77B-

1 INTRODUCTION After Guo[1] synthesized and detected C60-nBn and C70-nBn by mass spectra, investigations on fullerenes doped by other atoms became more and more interesting. Andreoni[2] studied the impurity states of the doped fullerenes C59B; Dong[3] calculated the structural and electronic properties of C59B; Wang[4] assessed the stability of heterohedral fullerenes C60-xBx. Lamparth[5] prepared C59N and C69N , and put forward the possible structures for C59N . Sahoo[6] obtained…     

硬质聚氯乙烯自然老化的变色行为与分子结构变化

以硬质聚氯乙烯(PVC)为研究对象,通过色差实验、FTIR、UV等方法探究了PVC在湿热、辐射低的琼海和暖温、干旱且辐射高的若羌地区自然老化的变色行为与分子结构变化.结果表明,太阳辐射是影响PVC自然老化过程中变色行为和分子结构变化的主要环境因素,PVC在干旱、辐射高的若羌地区比在湿热、辐射低的琼海地区更易变黄和变红,而在两地变暗的程度相近;这是因为随着自然老化时间的延长,PVC逐渐发生脱除氯化氢反应和氧化反应,在干旱且辐射高的若羌,更易发生脱除氯化氢反应,而在湿热且辐射低的琼海,脱除氯化氢反应和氧化反应的速度相近,在若羌老化的PVC样品生成了更多的共轭长度(n)≥8的C=C长共轭序列所致.     

The DFT study on Rh–C bond dissociation enthalpies of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III)alkyl

Rhodium transition-metal-organic cooperative catalysis, which has been intensively studied by many chemists, represents a great success in C–H bond activation because of high efficiencies and selectivities. Typically, in the reaction mechanism of aldehyde and alkene catalyzed by Rh(I) complex and 2-amino-3-picoline, two kinds of metala-cyclic transition-metal complexes of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III) alkyl are generally formed. The two complexes play an important role in the overall reaction, in which the Rh–C bond formations are involved. So it is meaningful to understand the strength of Rh–C bond, which can be measured by the homolytic bond dissociation enthalpies (BDEs). To this end, we first calculated 16 relative Rh–C BDEs of Tp′Rh(CNneopentyl)RH (Tp′?=?hydridotris-(3,5-dimethylpyrazolyl)borate) by 19 density functional theory (DFT) methods. Furthermore, the 5 absolute Rh–C BDEs of Rh transition-metal complexes were also calculated. The results show that the B97D3 is the most accurate method to predict the relative and absolute Rh–C BDEs and the corresponding RMSE values are the smallest of 2.8 and 3.3?kcal/mol respectively. Therefore, the Rh–C BDEs of (iminoacyl)rhodium(III)hydride and (iminoacyl)rhodium(III)alkyl as well as the substituent effects were investigated by using the B97D3 method. The results indicated that the different substituents exhibit different effects on different types of Rh–C BDEs. In addition, the analysis including the natural bond orbital (NBO) as well as the energies of frontier orbitals were performed in order to further understand the essence of the Rh–C BDE change patterns.     

C62及其吡啶衍生物结构与电子光谱的密度泛函理论研究

采用密度泛函理论(DFT)方法, 在TZP基组水平下计算C62及其吡啶衍生物几何与电子结构, 在全优化构型基础上, 采用TD-DFT方法对其低激发态进行计算, 预测其电子吸收光谱. 结果表明, 四种异构体的电子光谱中, 特征吸收来自C62内部的跃迁贡献, 也包括取代基到C62的电子转移. 取代基中N原子位置对490 nm左右吸收带的强度有影响, 两种顺式结构表现较为明显, 而两种反式结构衍生物光谱特征基本相同.     

直接甲醇燃料电池三元催化剂PtRuCo/C的制备及其电化学性质

使用柠檬酸三钠作为稳定剂,硼氢化钠作为还原剂,用浸渍还原法制备了20%(w)Pt60Ru30Co10/C催化剂.利用透射电子显微镜(TEM)和X射线衍射(XRD)对催化剂进行了表征.考察了不同pH值对制备催化剂的催化甲醇氧化能力及稳定性的影响,并使用预吸附单层CO溶出方法研究了其抗中毒能力.结果表明,当pH=8时,制备的PtRuCo/C对甲醇氧化具有最高的催化活性,其催化活性远高于商业化的Pt50Ru50/C,同时催化剂的稳定性最好,高于商业化的Pt50Ru50/C的稳定性,而且预吸附单层CO的起始氧化电位比Pt50Ru50/C的明显负移.     

Pd/C as Heterogeneous Catalyst for the Direct Arylation of (Poly)fluorobenzenes

The potential of the heterogeneous catalyst 10 % Pd/C in the direct arylation of (poly)fluorobenzene derivatives with aryl bromides has been investigated. In general, high yields of biaryl derivatives were obtained by using tri-, tetra-, and pentafluorobenzenes, whereas mono- and difluorobenzenes exhibited poor reactivity. The regioselectivities of the arylation reactions were similar to those observed with homogeneous palladium catalysts. Both electron-withdrawing and -donating substituents, such as nitrile, nitro, acetyl, ester, trifluoromethyl, tert-butyl, methoxy, or methyl, on the aryl bromide were tolerated. Unexpectedly, tetrafluoro-substituted [1,1′-biphenyl]-4-ols were obtained from pentafluorobenzene at 150 °C due to a formal regioselective hydroxylation, whereas at lower temperatures the expected pentafluorobiphenyls were obtained. However, no C−F bond cleavage was observed with the other polyfluorobenzene derivatives. These arylation reactions were carried out with only 1 mol % Pd/C as the catalyst and KOAc as an inexpensive base. Therefore, this protocol represents a very attractive access to (poly)fluoro-substituted biphenyls in terms of cost, simplicity, and sustainable chemistry because the Pd/C catalyst can be easily removed at the end of the reaction, there is no contamination with phosphine ligand residues, and the major side-product of the reaction is KOAc ⋅ HBr.     

CuI–Zn(OAc)2 catalyzed C(sp2)–H activation for the synthesis of pyridocoumarins through an uncommon CuI–CuIII switching mechanism: A fast,solvent-free,combo-catalytic,ball milling approach

CuI–Zn(OAc)₂ catalyzed, a fast, solvent-free synthetic protocol has been developed for the oxidative C–C and C–N coupling via C(sp²)–H activation. In this work, an aldehyde, terminal alkyne and 3-aminocoumarin were coupled together to form pyridocoumarin framework through a greener ball milling process under very mild condition. In contrast to the frequently used imine-alkyne cyclization reactions, this uncommon mild Cu^I–Cu^III switching combo-catalysis is expected to proceed through the formation of a flexible propargylic amine intermediate, which leads to a rapid C(sp²)–H activation for cyclization involving transient Cu^III species. The in-situ formation of transient Cu^III species was confirmed through ultraviolet–visible spectroscopy (UV–Vis), electrospray ionization mass spectrometry (ESI-MS), and X-ray photoelectron spectroscopy (XPS) analyses of the reaction mixture.     

分子C_(60)CH_2(C_(2V))气相热力学性质的理论研究

自从富勒烯被发现并能常量制备以来,人们就开始了对Ｃ６０衍生物的研究．Ｃ６０ＣＨ２是Ｃ６０最简单的衍生物之一,Ｃ６０ＣＨ２有２种异构体,根据所属点群的对称性划分一种是属Ｃ２Ｖ群的Ｃ６０ＣＨ２（Ｃ２Ｖ）,另一种是属ＣＳ群的Ｃ６０ＣＨ２（ＣＳ）．文献［１］...     

裂解汽油中C_4和C_5异构烯烃的分析

介绍了一种适于沸点范围从初馏点到２１０℃的裂解汽油中Ｃ４和Ｃ５异构烯烃的分析方法——以两根单柱分析系统的数据为基础,经关联计算进行定量。它具有操作简便、移植便利、分析结果重复性好、提供的信息全面等特点,满足了实际应用分析的要求。     

光化学反应-串联质谱法鉴定细胞中不饱和卵磷脂双键的位置

以二苯甲酮(Benzophenone,BP)为光化学反应的反应物,建立了乳腺细胞中不饱和卵磷脂双键位置和双键异构体相对含量的在线光化学反应-脉冲直流电喷雾串联质谱(PB-pulsed-dc-ESI-MS/MS)的检测方法.通过三相萃取法提取细胞中的脂类,在254 nm紫外光的照射下,使不饱和卵磷脂中的C詤C和BP中的羰基发生特异性的环加成反应(Paternó-Bǜchi,PB反应),将反应后的PB产物通过非接触式的脉冲直流电喷雾(Pulsed directed current electrospray,pulsed-dc-ESI)方式电离,并进行低能碰撞裂解得到二级串联质谱(MS/MS),从得到的二级谱图的子离子中可以获得双键位置以及双键异构体相对含量的信息.检测了癌细胞MCF-7和正常细胞MCF-10A中8种不饱和卵磷脂中的双键位置,且对其中4种双键异构体的相对含量进行分析,发现PC 16:018:1中△9异构体的含量在两种细胞中差异不明显,PC 18:018:1和PC 18:118:1中△9异构体的含量略有差异,LPC 18:1中△9异构体的含量在癌细胞和正常两种细胞中差异比较明显(56.0%±1.3%vs.71.7%±6.8%).本方法快速简易,可用于分析双键位置及双键异构体相对含量,有望对不同细胞状态以及不同疾病状态进行鉴别.     

Palladium-Catalyzed Enantio- and Regioselective Ring-Opening Hydrophosphinylation of Methylenecyclopropanes

Transition metal-catalyzed hydrofunctionalization of methylenecyclopropanes (MCPs) has presented a considerable challenge due to the difficult manipulation of regioselectivity and complicated reaction patterns. Herein, we report a straightforward Pd-catalyzed ring-opening hydrophosphinylation reaction of MCPs via highly selective C−C bond cleavage. This method allows for rapid and efficient access to a wide range of chiral allylic phosphine oxides in good yields and high enantioselectivities. Additionally, density functional theory (DFT) calculations were performed to elucidate the reaction mechanism and the origin of enantioselectivity.