苯基磺酸官能化中孔硅基材料的制备及催化性能研究

通过溶胶-凝胶法制得了苯基聚硅氧烷, 进一步磺化制备了苯基磺酸官能化的中孔硅基催化材料, 并通过BET, SEM和固体核磁技术对其进行了表征. BET结果表明, 该催化剂比表面积为722 m²/g, 平均孔径为9.06 nm, 孔容0.59 mL/g. ¹³C CPMAS NMR和²⁹Si CPMAS NMR表征显示磺酸基键合于苯环间位, 苯基以共价方式进入无机-有机杂化硅基材料的内部结构. 该固体酸的活性中心磺酸基在表面呈均匀分布, 在芳族羧酸和取代酚的直接酯化反应中表现出优异的催化性能.     

磺酸基团功能化的碳-硅介孔复合材料的制备及其在生物柴油绿色合成中的应用(英文)

利用化学浸渍法将蔗糖负载到 SBA-15 介孔材料孔道内部, 高温炭化形成的多聚苯环经发烟硫酸气相磺化处理后, 得到磺酸基团功能化的新型碳-硅介孔复合材料. 发烟硫酸气相磺化处理是该材料合成的关键步骤. X 射线衍射、扫描电镜和氮气吸附结果表明, 碳-硅介孔复合材料经磺酸化处理保持了高度有序的介孔结构. 热重、傅里叶变换的红外光谱及吡啶吸附红外光谱结果证明, 磺酸功能基团成功的嫁接于碳-硅介孔复合材料孔道的内表面, 反应活性中心为 Br?nsted 酸, 酸密度在 0.09~0.70 mmol/g 可以有效调变. 当碳负载量为 35% 时, 该复合材料在生物柴油的绿色合成中显示出最优的催化性能, 且可重复使用 3 次以上.     

功能化有序介孔碳对重金属离子Cu(II)、Cr(VI)的选择性吸附行为

以三嵌段共聚物F127为模板剂, 酚醛树脂为碳源, 正硅酸乙酯为硅源, 三组分共组装合成介孔碳?氧化 硅纳米复合物, 再经HF去除氧化硅, 得到有序介孔碳(OMC). X射线衍射(XRD)、透射电子显微镜(TEM)、低温 N2吸脱附(BET)等测试表明, 所得样品具有高度有序的介孔结构, 比表面积和孔容分别为1330 m²·g^-1和2.13 cm³·g^-1, 平均孔径6.4 nm. 对其先氧化、后氯化、再胺化, 得到不同胺基接枝量的胺化介孔碳(C-NH₂(m), m为加入的乙二胺的质量(g)). 傅里叶变换红外(FT-IR)光谱表征结果证实, 胺基官能团成功接枝到有序介孔碳表面.TEM测试表明介孔碳的有序孔道结构得到了较好的保持. 以有序介孔碳、胺化介孔碳作吸附剂对Cu(II)、Cr(VI)进行选择性吸附研究. 结果表明: 功能化修饰前, 样品对Cu(II)、Cr(VI)饱和吸附量分别为213.33、241.55 mg·g^-1; 修饰后饱和吸附量可分别达到495.05、68.21 mg·g^-1. 功能化介孔碳表现了较强的选择性吸附Cu(II)的能力.     

苯基磺酸官能化中孔硅基材料催化环己酮Aldol缩合反应

2-(1环-己烯基)环己酮是一种植物防腐杀菌剂,作为制备柑桔类水果的保鲜剂、分散染料染色的载体物质邻苯基苯酚(Ortho-phenylphenol,OPP)的原料而备受重视。其与环己叉基环己酮互为同分异构体,均由环己酮A ldol缩合反应合成,该过程是包括醇醛缩合、脱水在内的亲核加成-消除反应,     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

表面含磺酸基的介孔分子筛催化剂SBA-15-SO3H的制备及其催化性能

采用直接和后合成两种方法制备出含磺酸基的介孔分子筛SBA-15-SO₃H,用XRD和红外光谱分析制备过程中催化剂结构和组成的变化.结果表明,两种方法制备出的含磺酸基的催化剂都保持了SBA-15分子筛的完整晶体结构,并含有质子酸中心-SO₃H;固体核磁共振表征结果证明,两种方法都使MPTMS存在于分子筛的表面;用N₂吸附-脱附测定了它们的比表面积、孔径和孔容;TGA分析认为,MPTMS在分子筛表面的热稳定性大于300℃,酸碱滴定结果说明,直接法获得的催化剂的酸中心多于后合成法.酯化反应结果表明,直接法合成的催化剂比后合成法具有更高的稳定性,且简便、快捷、高效.     

Structural relation properties of hydrothermally stable functionalized mesoporous organosilicas and catalysis

The surfactant assistant syntheses of sulfonic acid functionalized periodic mesoporous organosilicas with large pores are reported. A one-step condensation of tetramethoxysilane (TMOS) with 1,2-bis(trimethoxysilyl)ethane (BTME) and 3-mercaptopropyltrimethoxysilane (MPTMS) in highly acidic medium was performed in the presence of triblock copolymer Pluronic P123 and inorganic salt as additive. During the condensation process, thiol (-SH) group was in situ oxidized to sulfonic acid (-SO(3)H) by hydrogen peroxide (30 wt % H(2)O(2)). X-ray diffraction studies along with nitrogen and water sorption analyses reveal the formation of stable, highly hydrophobic, and well-ordered hexagonal mesoscopic structures in a wide range of -CH(2)CH(2)- concentrations in the mesoporous framework. The resultant materials were also investigated by (29)Si MAS and (13)C CP MAS NMR, thermogravimetric analyses, UV-Raman spectroscopy, and FT-IR spectroscopy. The role of the bridged organic group on the hydrothermal stability of the mesoporous materials was established, which revealed an enhancement in hydrothermal stability of the materials with incorporation of the bridged organic groups in the network. The catalytic performance of -SO(3)H functionalized mesoporous materials was investigated in the esterification of ethanol with acetic acid, and the results demonstrate that the ethane groups incorporated in the mesoporous framework have a positive influence on the catalytic behavior of the materials.     

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the first time that ordered mesoporous nanocomposites have "reinforced concrete"-structured frameworks. By adjusting the initial mass ratios of TEOS to resol, we determined the obtained nanocomposites possess continuous composition with the ratios ranging from zero to infinity for the two constituents that are "homogeneously" dispersed inside the pore walls. The presence of silicates in nanocomposites dramatically inhibits framework shrinkage during the calcination, resulting in highly ordered large-pore mesoporous carbon-silica nanocomposites. Combustion in air or etching in HF solution can remove carbon or silica from the carbon-silica nanocomposites and yield ordered mesoporous pure silica or carbon frameworks. The process generates plenty of small pores in carbon or/and silica pore walls. Ordered mesoporous carbons can then be obtained with large pore sizes of approximately 6.7 nm, pore volumes of approximately 2.0 cm(3)/g, and high surface areas of approximately 2470 m(2)/g. The pore structures and textures can be controlled by varying the sizes and polymerization degrees of two constituent precursors. Accordingly, by simply tuning the aging time of TEOS, ordered mesoporous carbons with evident bimodal pores at 2.6 and 5.8 nm can be synthesized.     

MnO2-embedded-in-mesoporous-carbon-wall structure for use as electrochemical capacitors

We present an in situ reduction method to synthesize a novel structured MnO(2)/mesoporous carbon (MnC) composite. MnO(2) nanoparticles have been synthesized and embedded into the mesoporous carbon wall of CMK-3 materials by the redox reaction between permanganate ions and carbons. Thermogravimetric analysis (TG), X-ray photoelectron spectrum (XPS), X-ray diffraction (XRD), nitrogen sorption, transmission electron microscopy (TEM), and cyclic voltammetry were employed to characterize these composite materials. The results show that different MnO(2) contents could be introduced into the pores of CMK-3 treated with different concentrations of potassium permanganate aqueous solution, while retaining the ordered mesostructure and larger surface area. Increasing the MnO(2) content did not result in a decrease in pore size from the data of nitrogen sorption isotherms, indicating that MnO(2) nanoparticles are embedded in the pore wall, as evidenced by TEM observation. We obtained a large specific capacitance over 200 F/g for the MnC composite and 600 F/g for the MnO(2), and these materials have high electrochemical stability and high reversibility.     

Preparation and application of nanocatalysts via surface functionalization of mesoporous materials

Surface immobilization of active species onto mesoporous materials is gaining importance, especially in the design of functionalized mesoporous materials as a nanocatalyst through heterogenization of homogeneous catalytic systems. This article summarizes recent work on the synthesis, characterization and catalytic performance of the functionalized mesoporous catalysts performed by the present authors. A cationic rhenium(I) complex was encapsulated into mesoporous Al-MCM-41 molecular sieve using a ion-exchange method, yielding a new photocatalyst to be active for photocatalytic reduction of CO₂. Surface functionalization of mesoporous silica SBA-15 with sulfonic acid groups was investigated to give a solid acid catalyst. The chemically modified Fe-containing mesoporous materials, which are active for hydroxylation of phenol, were prepared by a surface-grafting method that iron salts are immobilized onto mesoporous Si-MCM-41 with the help of 3-aminopropyltrimethoxysilane as a linker. A cobalt(III) complex was heterogenized onto mesoporous silica SBA-15 containing carboxylic groups in order to utilize as a solid catalyst for the liquid-phase oxidation of aromatic hydrocarbons.     

高比表面积有序介孔氧化铝的制备与表征

采用溶胶-凝胶法以非离子表面活性剂PEO-PPO-PEO三嵌段共聚物F127为模板剂, 以异丙醇铝为铝源, 以异丙醇为溶剂, 成功地制备出比表面积为485 m2/g、孔径分布窄(2~20 nm)、孔容在1.2 cm3/g以上和孔道呈蠕虫状且具有一定有序性的介孔氧化铝. 采用BET, TEM, XRD和TG多种测试技术对产物性能进行了表征. 探讨了水铝比、醇水混合溶液的滴加速度、反应时间、水浴温度、陈化温度及陈化时间等条件对合成的有序介孔氧化铝结构的影响.     

苯及苯磺酸基官能化的中孔分子筛的合成及催化应用

近年来 ,通过对介孔分子筛 (如 MCM,HMS,MSU-X)结构及组成的化学“裁剪”,制备具有特定结构和表面性质的催化材料成为该领域的研究热点之一 [1～ 5] .许多文献报道了 MCM-4 1的有机官能化中孔材料的制备技术 [5～ 8] ,并将其应用于有机合成反应 ,取得了较好的结果 [7,8] .其中 MSU-X介孔分子筛结构具有三维排列“Worm-like”孔道特征 ,有利于物料传输 ;相对于 MCM-4 1分子筛在合成方面具有以中性表面活性剂作模板剂且模板剂容易去除等诸多优点[9] .本文采用非离子表面活性剂 C11— 15H2 3— 31(CH2 CH2 O) 9H(AEO9)为模板剂 ,…     

Synthesis of Superacid‐Functionalized Mesoporous Nanocages with Tunable Pore Diameters and Their Application in the Synthesis of Coumarins

Here we demonstrate for the first time the preparation of a triflic acid (TFA)‐functionalized mesoporous nanocage with tunable pore diameters by the wet impregnation method. The obtained materials have been unambiguously characterized by XRD, N₂ adsorption, FTIR spectroscopy, and NH₃ temperature‐programmed desorption (TPD). From the characterization results, it has been found that the TFA molecules are firmly anchored on the surface of the mesoporous supports without affecting their acidity. We also demonstrate the effect of the pore and cage diameter of the KIT‐5 supports on the loading of TFA molecules inside the pore channels. It has been found that the total acidity of the materials increases with an increase in the TFA loading on the support, whereas the acidity of the materials decreases with an increase in the pore diameter of the support. The acidity of the TFA‐functionalized mesoporous nanocages is much higher than that of the zeolites and metal‐substituted mesoporous acidic catalysts. The TFA‐functionalized materials have also been employed as the catalysts for the synthesis of 7‐hydroxy‐4‐methylcoumarin by means of the Pechmann reaction under solvent‐free conditions. It has been found that the catalytic activity of the TFA‐functionalized KIT‐5 is much higher than that of zeolites and metal‐substituted mesoporous catalytic materials in the synthesis of coumarin derivatives. The stability of the catalyst is extremely good and can be reused several times without much loss of activity in the above reaction.     

Mesoporous Carbons Templated by PEO-PCL Block Copolymers as Electrode Materials for Supercapacitors

In this study, samples of activated mesoporous carbon are fabricated with pore structures with cylinder and gyroid nanostructures through the templating effect of amphiphilic poly(ethylene oxide-block-caprolactone) (PEO-PCL) and by using specific resol/PEO-PCL weight ratios (e.g., 60:40 for cylinders; 55:45 for gyroids). After carbonization and KOH activation, the activated mesoporous carbons were tested as electrode materials for electric double-layer capacitor (EDLC) supercapacitors. The electrochemical properties were examined by using three-electrode (6 m KOH_(aq) as electrolyte) and CR2032 coin-cell (1 m tetraethylammonium tetrafluoroborate (TEABF₄)/CN as the electrolyte) systems. The gyroid carbon samples provided specific capacitances higher than those of the cylinder carbon samples in both aqueous and organic systems: 155 F g⁻¹ compared with 135 F g⁻¹ in 6 m KOH_(aq), and 105.6 compared with 96 F g⁻¹ in 1 m TEABF₄/MeCN, after 100 charge/discharge cycles. It is suspected that the bi-continuous mesochannels of the gyroid-type activated mesoporous carbons provided a relatively higher effective adsorption surface area; in other words, the greater surface area for energy storage originated from a moderate pore size and an interconnected pore structure.     

Simple methods for tuning the pore diameter of mesoporous carbon

The organic-organic self-assembly method with Resorcinol (R)/Formaldehyde (F) and Pluronic F127 has been employed to synthesize mesoporous carbon (MC). The pore diameter of the MC has been tuned from 7 to 12.5 nm by changing the molar ratio of carbon sources to surfactant and polymerization time.     

碳前驱体在全氟磺酸型碳基固体酸材料设计中的影响

以碳纳米管、介孔碳分子筛和氮掺杂的介孔碳为前驱体,采用全氟磺酸-全氟乙烯共聚物(PTFE)液相沉积方法制备了修饰量相同的三种全氟磺酸功能化碳基固体酸催化剂,利用N₂吸附、热重分析(TG)、透射电子显微镜(TEM)、傅里叶红外变换(FTIR)光谱以及电位滴定等方法对材料的结构和酸性进行了表征.考察催化剂对于苯甲醇与苯甲醚Friedel-Crafts (F-C)反应的催化性能.结果表明,前驱体的比表面积越大,与修饰剂的相互作用越强,越有利于修饰剂在前驱体表面的分散,得到的催化剂表面酸量越多,酸催化活性越好.因此,全氟磺酸功能化的氮掺杂介孔碳在F-C反应中表现出最高的活性和稳定性.     

Surface Diels-Alder reactions as an effective method to synthesize functional carbon materials

The post-synthesis chemical modification of various porous carbon materials with unsaturated organic compounds is reported. By this method, amine, alcohol, carboxylate, and sulfonic acid functional groups can be easily incorporated into the materials. Different carbonaceous materials with surface areas ranging from 240 to 1500?m(2)g(-1) and pore sizes between 3.0 and 7.0?nm have been studied. The resulting materials were analyzed by elemental analysis, nitrogen sorption, FTIR spectroscopy, zeta-potential measurements, thermogravimetric analysis, photoelectron spectroscopy, and small-angle X-ray scattering. These analyses indicated that the degree of functionalization is dependent on the nature of the dienophile (reactivity, steric hindrance) and the porosity of the carbon material. As possible applications, the functionalized carbonaceous materials were studied as catalysts in the Knoevenagel reaction and as adsorbents for Pb(2+) from aqueous solution.     

Free-standing mesoporous carbon thin films with highly ordered pore architectures for nanodevices

We report for the first time the synthesis of free-standing mesoporous carbon films with highly ordered pore architecture by a simple coating-etching approach, which have an intact morphology with variable sizes as large as several square centimeters and a controllable thickness of 90 nm to ～3 μm. The mesoporous carbon films were first synthesized by coating a resol precursors/Pluronic copolymer solution on a preoxidized silicon wafer and forming highly ordered polymeric mesostructures based on organic-organic self-assembly, followed by carbonizing at 600 °C and finally etching of the native oxide layer between the carbon film and the silicon substrate. The mesostructure of this free-standing carbon film is confirmed to be an ordered face-centered orthorhombic Fmmm structure, distorted from the (110) oriented body-centered cubic Im3?m symmetry. The mesoporosity of the carbon films has been evaluated by nitrogen sorption, which shows a high specific BET surface area of 700 m(2)/g and large uniform mesopores of ～4.3 nm. Both mesostructures and pore sizes can be tuned by changing the block copolymer templates or the ratio of resol to template. These free-standing mesoporous carbon films with cracking-free uniform morphology can be transferred or bent on different surfaces, especially with the aid of the soft polymer layer transfer technique, thus allowing for a variety of potential applications in electrochemistry and biomolecule separation. As a proof of concept, an electrochemical supercapacitor device directly made by the mesoporous carbon thin films shows a capacitance of 136 F/g at 0.5 A/g. Moreover, a nanofilter based on the carbon films has shown an excellent size-selective filtration of cytochrome c and bovine serum albumin.     

介孔有机无机杂化材料的合成和表征及在Pinacol重排反应中的研究

以巯丙基-三乙氧基硅烷为有机硅源,采用接枝法合成了磺酸基功能化有机无机杂化材料(MCM-SO3H).XRD、FT-IR、BET的研究表明,磺酸基功能化介孔有机无机杂化材料具有非常高的比表面积和规整的六方孔道结构.酸性测定表明,MCM-SO3H含酸量为0.40mmolH /g.MCM-SO3H对pinacol重排反应具有很高的催化活性,在反应温度为383K时,pinacol的转化率接近100%,pinacolone的选择性达到90%左右.反应温度、反应时间、催化剂用量和溶剂对pinacol重排反应有很大的影响提高反应温度、延长反应时间和增加催化剂的用量,均可提高pinacol的转化率和pinacolone的选择性.中等极性溶剂有利于pinacol重排反应.     

Nanoporous thin films from ionically connected diblock copolymers

An ionically connected polystyrene-block-poly(ethylene oxide) diblock copolymer (PS^?+PEO) has been prepared by blending a PEO block functionalized by a dimethylamino group at one extremity with a sulfonic acid terminated PS block. Proton transfer occurs from the sulfonic acid to the dimethylamino group, resulting in the formation of an ion pair acting as a junction between the two polymer blocks. This copolymer was further used to prepare thin films with a cylindrical morphology consisting of PEO cylinders embedded in a PS matrix and oriented perpendicularly to the film surface. Nanoporous thin films with sulfonate groups on the pore walls have been finally obtained after solvent extraction of the PEO microphases. The presence of those sulfonate groups was evidenced by grafting a positively charged fluorescent dye on the pore walls.